GA-Z87N-WIFI - Motherboard GIGABYTE - Free user manual and instructions

Product Type	Motherboard
Brand	GIGABYTE
Model	GA-Z87N-WIFI
Form Factor	Mini-ITX
CPU Socket	LGA1150
Chipset	Intel Z87
Memory Type	DDR3
Number of Memory Slots	2 (Dual Channel)
Maximum Memory Capacity	16 GB
Expansion Slots	1 x PCI Express x16
SATA Storage	4 x SATA 6 Gb/s
Integrated USB	2 x USB 3.0, 8 x USB 2.0
Audio	Realtek ALC892 (HD Audio)
Wired Network	1 x Gigabit Ethernet
Wi-Fi	802.11a/b/g/n/ac + Bluetooth 4.0
BIOS	UEFI DualBIOS
Dimensions	170 mm x 170 mm (Mini-ITX)
Power Requirement	ATX 24-pin + 4-pin CPU
Maintenance and Cleaning	Regular dusting with compressed air, avoid humidity.
Safety	Disconnect power before any handling, work on an antistatic surface.
Spare Parts	Not applicable (sealed motherboard). Repair by professional.
General Information	GIGABYTE GA-Z87N-WIFI motherboard for 4th generation Intel Core processors.

Frequently Asked Questions - GA-Z87N-WIFI GIGABYTE

What type of processor is compatible with this motherboard?

It supports 4th generation Intel Core processors (Haswell) on LGA1150 socket, including compatible i3, i5, i7 and Pentium/Celeron.

How to install the CPU on the motherboard?

Lift the socket lever, align the triangle on the processor with the socket triangle, gently insert without forcing, then lower the lever. Consult the manual for details.

What RAM can I use?

Non-ECC DDR3 modules, in dual-channel configuration. Maximum capacity is 16 GB (2 x 8 GB). Frequency can range from 1333 to 2933 MHz (OC).

How to connect the front panel of the case?

Locate the F_PANEL header on the motherboard. Connect the case cables (power, reset, LED, speaker) according to the pinout indicated in the manual. Polarities are important for LEDs.

Is a specific power supply required?

A standard ATX power supply with 24-pin and 4-pin CPU connectors is recommended. A good quality PSU (at least 400W) is advised for stability.

How to update the BIOS?

Download the latest BIOS from GIGABYTE's website. Use the @BIOS utility under Windows or the Q-Flash function in the BIOS. Follow the manual instructions.

Why won't my computer start?

Check that all power cables are connected, RAM is properly inserted, CPU is correctly installed, and the case power button is connected to the right place. Try a CMOS clear.

How to enable Wi-Fi and Bluetooth?

Install the Intel drivers for the Wi-Fi/Bluetooth module provided on the DVD or download them. In Windows, enable the devices in Device Manager. The physical switch must be in the ON position.

What are the fan connections?

The motherboard has CPU_FAN and SYS_FAN connectors (at least one). Connect the CPU fan to CPU_FAN to control speed and prevent overheating.

Where to find drivers and software?

They are available on the provided DVD or on GIGABYTE's official website in the product support section. Download drivers for chipset, audio, network, etc.

USER MANUAL GA-Z87N-WIFI GIGABYTE

The sequence of installation may differ depending on the type of case and devices used. The installation instructions below apply to GIGABYTE's desktop systems and are for reference only.
Refer to the user's manual included for detailed motherboard specifications.
- Before installing the devices, make sure they are compliant with the connectors on your computer.
- Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices and the system components.
- Place the computer system on a stable surface to prevent improper installation resulted from shaking.

Installing a CPU and CPU Cooler

A. Installing an Intel CPU (skip this step if the motherboard has a built-in CPU)

A-1 Refer to the following instructions based on your CPU specifications:

• Type A:

Lift the CPU socket lever and the metal load plate will be lifted as well.

a. If the protective socket cover is fastened on the CPU socket, remove it first.
b. If the protective socket cover is fastened on the metal load plate, do not remove it at this stage. The socket cover may pop off from the load plate automatically during the process of re-engaging the lever after you insert the CPU.

• Type B:

Push lever A (closest to the "□" marking) down and away from the socket to release it. Then push lever B (closest to the "□" marking) down and away from the socket and lift it. Gently press lever A to allow the load plate to rise. Open the load plate.

A-2 Hold the CPU with your thumb and index fingers. Align the CPU pin one marking (triangle) with the pin one corner of the CPU socket (or you may align the CPU notches with the socket alignment keys) and gently insert the CPU into position.
A-3 Once the CPU is properly inserted, replace the load plate and push the CPU socket lever back into its locked position. Once the type B is properly inserted, carefully replace the load plate. Then secure lever B under its retention tab. The socket cover may pop off from the load plate during the process of engaging the lever. Finally, secure lever A under its retention tab to complete the installation of the CPU.

For detailed instructions on installing the CPU, please refer to the user's manual.

B. Installing an AMD CPU (skip this step if the motherboard has a built-in CPU)

B-1 Completely raise the CPU socket lever. Align the CPU pin one (small triangle marking) with the triangle marking on the CPU socket and gently insert the CPU into the socket. Make sure that the CPU pins fit perfectly into their holes.
B-2 Once the CPU is positioned into its socket, place one finger down on the middle of the CPU, lowering the socket lever and latching it into the fully locked position.

• Do not force the CPU into the CPU socket. The CPU cannot fit in if oriented incorrectly. Adjust the CPU orientation if this occurs.
• DO NOT touch socket contacts. To protect the CPU socket, always replace the protective socket cover when the CPU is not installed.

C. Installing the CPU cooler

C-1 Before installing the CPU cooler, please first add a thin layer of heat sink paste on the surface of the CPU. Then install the cooler (refer to the installation manual for your CPU cooler).
C-2 Connect the CPU cooler cable to the CPU_FAN connector located on the motherboard so that the cooler can properly function to prevent the CPU from overheating.

Installing Memory

Note the orientation of the memory module. Spread the retaining clips at both ends of the memory socket. Place the memory module on the socket. As indicated in the picture on the left, place your fingers on the top edge of the memory, push down on the memory and insert it vertically into the memory socket. The clips at both ends of the socket will snap into place when the memory module is securely inserted.

Preparing the Case and Installing a Power Supply

Using the GIGABYTE desktop system as the demonstration example, please first remove both sides and the lid of the case in order to install the power supply. Place the power supply in the correct place in the case and secure it with screws. Installation and placement of the power supply may differ depending on the type of case used.

To ensure sufficient power can be supplied to your system, it is recommended that a power supply of good quality be used. If a power supply is used that does not provide the required power, the result can lead to an unstable or unbootable system.

Step

4

Installing the Motherboard

Remove the original I/O shield from the back of the case and replace it with the motherboard I/O shield. Place the motherboard within the case by positioning it into its I/O shield. Align the mounting screw holes on the motherboard with their corresponding mounting holes on the case. Secure the motherboard in place with screws.

I/O Shield

Step

5

Installing an Expansion Card

PCI Express Graphics Card

Locate an expansion slot that supports your card and remove the slot cover from the case back panel. Then insert the expansion card into the slot. Secure the expansion card's bracket to the case back panel with a screw.

• Before purchasing an expansion card, check the length of the card, making sure it can fit into your case.
• Make sure that the expansion card is fully seated in its slot.

Step

6

Installing IDE and SATA Devices

Installing an Optical Drive

6-1 Install your optical drives, such as DVD-ROM and CD-ROM drives.

Remove the 5.25" drive bay cover from the front of the case. Mount the optical drive in the 5.25" drive bay and secure it with screws.

Installing a Hard Drive

6-2 Install your IDE and SATA hard drives.

Install the hard drive into a drive bay within the case and secure it with screws.

• One motherboard IDE connector can connect up to two IDE devices. Prior to installation, check the jumper settings (master and slave) on your IDE devices.
• If more than one hard drive is installed, enter system BIOS Setup to set the hard drive boot sequence.

Connecting Cables to Internal Connectors

7-1 Connect cables to internal connectors and headers on the motherboard, including IDE/SATA connectors, and front panel audio, USB, IEEE 1394 headers, etc.
7-2 Attach the front panel module (differs depending on the case design, consisting of power indicator, hard drive activity indicator, speakers, reset switch, power switch, etc.) from the case to the front panel header (F PANEL) on the motherboard.

Front Panel Header

Pin Assignments A:

Pin Assignments B:
MSG: Message/Power/Sleep LED

PWR: Power LED

PW: Power Switch

SPEAK:Speaker

HD: Hard Drive Activity LED

RES: Reset Switch

Cl: Chassis Intrusion Header

(Note) The pin assignments for the front panel header may differ by model. Refer to the motherboard user's manual for the actual pin assignments.

Connecting Peripherals

Back Panel of the Case

Once the steps above have been completed, connect the peripheral devices to the computer, such as the keyboard, mouse, monitor, etc. Then connect the power, turn on the system, and install all required software.

Conector do paine frontal

YctaHOBka CNCTeMHoN pIaTbI

CnHmnte 3aIyUkPy pa3bEmOB BBOda/BbIBOda Ha 3aIeHne HaneHn Kopnyca n yCTAHOBITE Ha ee MeTO NaHEnb pa3bEmOB BBOda/BbIBOda nKOMNIJEKTa noCTABKN CNTeMHNO nPaTb. YCTAHOBITE CNTeMHYIO nPATEB KOPnyce, COBMecTINB pa3bEmbl Ha 3aIeHne HaneHn CNCTeMHNO nPATE C OTBepCTNnMn H aNaHEn BBOda/BbIBOda. COBMecTIne KpeENXhIE OTBepCTNc NCTeMHNO nPATAc COoTBETCTByUOUMn OTBepCTNnMn Kopnyca. 3akpenite CNTeMHYIO nPATAy B Kopnyce PI K c NOMouBv BNTOB.

3aŋnyuka pa3bEmOB BBOda/BbBOda

YctaHOBka pnaTbI paCwnpeHnA

Adum Bellegin Kurulumu

Push lever A (closest to the "□" marking) down and away from the socket to release it. Then push lever B (closest to the "□" marking) down and away from the socket and lift it. Gently press lever A to allow the load plate to rise. Open the load plate.

A-2 Hold the CPU with your thumb and index fingers. Align the CPU pin one marking (triangle) with the pin one corner of the CPU socket (or you may align the CPU notches with the socket alignment keys) and gently insert the CPU into position.
A-3 O data ce CPU-ul este introdus corect, asezati din nou placuţa de metal si impingeti bratul sociului de CPU inapo in positia blocata.

PWR: LED pornography

PW: Intrerupator de alimentare

SPEAK: Difuzor

HD:LED activate hard disk

RES: Intrerupator de reinitializare

(wnnn nn nnnn nn nnnn nn nnnn nn nnnn nn

TAYAN WNN'ON 19 NINN. TAYAN NAWIN NNT NINN PINK ON 1-2
OON, TAYAN NAWIN BY IIONN WYNN INN (IOT WYNN IIONN)
PITY DNNN TAYAN WYNN KTN.NAWIN KNTY

0000000000000000

n, Twn nn nnn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn

nnp nnp npnnn nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

.

n nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

Taynn npn .

y nnnn nn nnnn nn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nn

PCN PNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN NNNN N

1-

n nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nn

nD 790 nnnn nn

3

n nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nni nnnn nn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn

GIGABYTE

.

wannnnn nn anan nnnn nn nnnnnnnnnnnnn

n nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nynnnnnnn

n 10000000000000000000000000000

NOTE

Taynn TAYNN

(nnnn nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

1

:A

n nn nnnnnnnnnnnnnnnnnnnnn

nnn nixon,ynnn nevin pinn nnwnnynn a.

aon nnnn onnnn nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

ywn nn nnnn nn nnnn nn nnnn nn nn nn nn nn

TNNNOONN

:Bao

Bn nnnn nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

yipn nnh nx nn9.naiipnn nyipn

n nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

B 1000000000000000000000000000000000000000000000000000000

.ynnnn

wnnnn nn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn