SHP52 - Couverture chauffante / Coussin chauffant PRIME3 - Free user manual and instructions

Product Type	Double Electric Under Blanket
Dimensions	160 x 140 cm (63 x 55 in)
Power Consumption	120 W
Supply Voltage	230 V ~ 50/60 Hz
Controller Type	Detachable with on/off switch, temperature, timer, and reset buttons
Heating Levels	5 levels: 25°C, 30°C, 35°C, 45°C, 50°C
Timer Function	1–12 hours selectable
Washability	Hand wash only, controllers must be removed before washing
Water Temperature for Washing	Below 30°C
Drying Method	Hang until completely dry; do not iron
Fixing Method	Place on mattress, ensure even distribution without folds
Safety Features	Timer auto shut-off; do not use with external timers; do not cover controller
Intended Use	Domestic only, not for medical use
Standards Compliance	CE, LVD, EMC directives; WEEE compliant
Storage	Cool down before folding; store loosely in bag, avoid creases on heating cables

Frequently Asked Questions - SHP52 PRIME3

How do I wash the electric blanket?

The blanket can be hand washed only. First disconnect the controller from the sheet. Soak in warm water (below 30°C) with mild soap for 15 minutes, then gently hand wash for 2 minutes. Rinse with running water and hang to dry completely before use. Do not machine wash, dry clean, or iron.

Can I use the blanket on an adjustable bed?

Yes, but ensure the blanket and cords are not pinched or damaged by the bed's hinges. Always lay the blanket flat without folds or kinks.

Is it safe to leave the blanket on all night?

No, the manual recommends turning off the blanket before sleeping. Use the timer function (1–12 hours) to set a desired heating duration and then switch it off.

What temperature settings are available?

The controller offers 5 heating levels: 25°C, 30°C, 35°C, 45°C, and 50°C. You can adjust using the temperature button.

Does the blanket have an automatic shut-off?

Yes, you can set a timer from 1 to 12 hours. When the timer reaches zero, the blanket will turn off. Additionally, you should always turn off the power switch before going to sleep.

Can I use a separate timer or remote control?

No, the blanket is not intended to be controlled by an external timer or remote. Use only the built-in controller.

How do I reset the controller?

Press the reset button to undo previous settings. The device will revert to the default state.

What should I do if the blanket is not heating?

First, ensure the power cord is plugged into a working outlet and the switch is in the 1/2 position. Check that the controller is properly connected to the sheet. If it still doesn't heat, press the reset button. If the problem persists, contact customer service.

Can I use this blanket if I have a pacemaker?

The manual does not provide specific guidance for pacemaker wearers. As a precaution, consult your doctor before using any electric blanket.

How should I store the blanket when not in use?

Allow the blanket to cool completely. Disconnect the controller and fold or roll the blanket loosely. Store it in a bag away from heavy items that could crease the internal heating cables.

USER MANUAL SHP52 PRIME3

White medical pressure monitor with two connected devices on a folded sheet (no visible text or symbols)

Owner's manual

Bedienungsanleitung

Instrukcja obsługi

Double electric under blanket

IMPORTANT INFORMATION

• To achieve the highest satisfaction, enjoy the performance of the product and learn all its features and functions, please read this manual before using this product.
• Before using the device, read the operating instructions and follow the instructions contained therein. The manufacturer is not liable for damages caused by the use of the device contrary to its intended use or improper operation. The operating manual should be kept so that it can also be used during later use of the product.
• The appliance is intended for domestic use only. Do not use for other purposes not in accordance with its intended purpose.
• The device must only be connected to an earthed socket with the characteristics specified on the rating plate.
• Make sure that the total amperage of all devices plugged into the wall outlet does not exceed the maximum rating of the fuse.
• If an extension cord is used, make sure the total wattage of the equipment connected to the extension cord does not exceed the extension cord's capacity. Position the extension cord in such a way as to avoid accidental strokes and tripping over it. Make sure your extension cord is grounded, 3-wire grounded receptacle.
• Do not let the appliance's power cord hang over the edge of a table or shelf, or let it touch a hot surface.
• The unit is not intended to be controlled by an external timer, separate remote control, or other equipment that could turn the unit on automatically.
• Always disconnect the device from the power supply before any maintenance work. When disconnecting the power cord, always pull it out from the outlet by the plug. Never pull out the power cord by pulling the cord, as the plug or cord may be damaged, and in extreme cases, even a fatal electric shock may result.
• The device must not be left unattended when plugged in.
• The device should be cleaned regularly according to the recommendations described in the section on Cleaning and

maintenance of the device. Do not place the device near sources of heat, flames, an electric heating element or on a hot oven. Do not put on any other device.

• This equipment may be used by children at least 8 years of age and by persons with reduced physical and mental abilities and persons with inexperience and knowledge of the equipment, provided that supervision or instruction regarding the use of the equipment is provided in a safe manner, so as to the dangers were understandable. Children should not play with the equipment. Children without supervision should not clean and maintain the equipment.
• Be especially careful when using the device when children or pets are nearby. Children should not be allowed to play with the appliance.
• Do not use the device near flammable materials.
• Do not expose the device to weather conditions (rain, sun, etc.) and do not use it in conditions of increased humidity (bathrooms, damp mobile homes).
• Periodically check the condition of the power cord. If the non-detachable power cord is damaged, it should be replaced at the manufacturer's or in a specialized repair shop or by a qualified person in order to avoid a hazard. Do not use the appliance with a damaged power cord, plug, or if it has been dropped or damaged in any way, or if it is not working properly. Do not repair the device yourself as there is a risk of electric shock. Take the damaged device to an appropriate service center for inspection or repair. Any repairs may only be performed by authorized service points. Incorrectly performed repairs can pose a serious threat to the user.
• Use only original accessories for the device or those recommended by the manufacturer. The use of accessories not recommended by the manufacturer may damage the device and may compromise its safe use.
• Never handle the device or the power adapter with wet hands.
• The device should be switched off each time after use.
• Never use the device when folded up. Do not stick pins, needles or

other metal objects into the product.

• Do not use the device if it is wet or damp. Leave the product hanging loosely in a ventilated place until it is completely dry.
• Regularly check the equipment for signs of wear and damage. In the event of such signs or improper use of the equipment, consult with the supplier before further use.
• Do not fall asleep without first turning off the device.
• Do not cover the controller.
• Before use, make sure that it is evenly distributed and has no kinks or folds.
  • The sheets can be cleaned with a damp cloth.
  • Never iron the product!
• Do not use the device on an adjustable bed, or if you use the device on an adjustable bed, check that the sheets and cords are not bent or damaged by the hinges.
  • This product is not intended for medical use in hospitals.
  • The product should cool down before storing.
  • Do not use the product until it is completely dry!

Device is compliant with EU directives: - Low voltage directive (LVD), - Electromagnetic compatibility (EMC), Device marked CE mark on rating label.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance in the common waste bin.

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam(buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Before first use

1) The product should be unfolded and laid flat before starting.
2) We recommend that you set the appliance to the maximum setting two to three hours before going to bed and then set it to the desired heating setting 15 minutes before going to bed. Please turn off the power before going to sleep.

Method of fixing on the bed:

1. Place the product on the mattress.
2. Pay attention to the location of the controllers

Device description

1. Controller

a. Switch
b. Temperature adjustment button
c. Timer button
d. Reset button

1. Power cord

2. Bed sheet

Controller support

1. Plug the power cord into an electrical outlet.
2. Move the power switch to the 1/2 position to turn on the controller.
3. Using the temperature adjustment button, select the 5-step heating temperature.

a. 25^ C
b. 30^ C
c. 35^ C
d. 45^ C
e. 50 °C

1. Using the timer button, select the heating time from 1-12 h.

2. By using the reset button you can undo the previous settings

3. Turn off the device by moving the switch to position 0.

Storage

Always allow the product to cool down before folding and storing. Disconnect the controller and fold the sheet. If you want to remove the sheets from the bed when not in use, roll them up or fold them loosely and store them in a bag. Avoid creating visible creases on the product, for example, do not store it under other items that may bend the internal heating cable.

Cleaning

The product can be washed by hand because it has detachable controllers. Make sure the controllers wire is disconnected from the sheet. Soak in a solution of warm water and mild soap for 15 minutes. Make sure the water temperature is below 30^ . Hand wash only by immersing in the tub f or 2 minutes. Rinse under running water. Hang until completely dry.

TECHNICAL DATA

Nominal power consumption: 120 W Supply voltage: 230 V \~ 50/60 Hz Dimension (Height x Width): 160 X 140

WICHTIGE INFORMATIONEN

02-801 Warsaw, Poland

phone: [phone]

e-mail: [e-mail]

www.prime3.pl

In case of questions or problems

please contact our service.

Tel. [phone]

E-mail: [e-mail]

All rights reserved. All brand names are registered trademarks of their

respective owners. Specifications are subject to change without prior notice.