MZC-340-PV - Measurement Sonel - Free user manual and instructions
Find the device manual for free MZC-340-PV Sonel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Photovoltaic Installation Tester / Multimeter |
| Dimensions | Approximately 220 x 94 x 50 mm |
| Weight | About 0.6 kg (including batteries) |
| Power Supply | 4 x AA alkaline batteries (1.5V) or rechargeable NiMH |
| Main Functions | Insulation resistance measurement up to 2000 MΩ, earth resistance, RCD testing, voltage, current, power, PV curve tracing |
| Maintenance and Cleaning | Clean with a soft, damp cloth; avoid solvents; store in a dry place |
| Safety | CAT III 600V / CAT IV 300V, double insulation, overvoltage protection |
| Spare Parts and Repairability | Replacement test leads, fuses, battery compartment; service by authorized Sonel centers |
| General Information | Complies with IEC 61557, IEC 61010; includes software for data download |
Frequently Asked Questions - MZC-340-PV Sonel
How do I measure insulation resistance with the MZC-340-PV?
Connect the test leads to the object and press the Riso key. Select the test voltage (50V to 1000V) and press Start. Reading appears after a few seconds.
What is the maximum insulation resistance range?
The maximum range is 2000 MΩ (depending on test voltage). Accuracy varies with voltage, typically ±5%.
How do I change the batteries?
Turn off the meter, open the battery compartment on the back, replace all four AA cells with fresh ones, reattach the cover.
Can I measure earth resistance with this device?
Yes, using the RE function. Connect the earth electrodes and press RE then Start. Use 3-pole or 4-pole method.
What does the PV curve tracing feature do?
It measures the I-V characteristic of photovoltaic modules. Connect the module, select PV function, and the device plots the curve automatically.
Is the device safe for use on live circuits?
Yes, it is rated CAT III 600V / CAT IV 300V and has overload protection. Always follow safety instructions.
How do I calibrate the MZC-340-PV?
Calibration should be performed annually by an authorized Sonel service center. The device has a calibration reminder function.
What is the included accessory set?
Standard accessories include test leads with alligator clips, test probes, USB cable, carrying case, and 4 AA batteries.
Can I download measurement data to a computer?
Yes, use the USB port and Sonel's SonelReader software to transfer data. Drivers are included.
How do I verify the device is working correctly?
Perform a self-test by pressing the TEST key on startup. Also check on a known reference resistor.
User questions about MZC-340-PV Sonel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual MZC-340-PV - Sonel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MZC-340-PV by Sonel.