RX-D53 - Radio PANASONIC - Free user manual and instructions

Product Type	Portable Stereo CD System
Model	RX-D53
Brand	Panasonic
Power Supply	AC 220-240 V, 50/60 Hz or 12 V DC (8 x LR14 batteries)
Power Consumption	17 W (standby: approx. 2 W)
Dimensions (W x H x D)	408 mm x 148 mm x 271 mm
Weight	8.2 kg (without batteries)
Audio Output Power	4 W x 2 (RMS)
Disc Playback	CD, CD-R/RW (CD-DA, MP3)
Radio Bands	FM (87.5-108 MHz), AM (522-1629 kHz)
Tape Deck	Cassette playback and recording
USB Playback	MP3 (RX-D53 only)
Music Port Input	3.5 mm stereo, sensitivity 100 mV
Headphone Jack	3.5 mm stereo, 32 Ω impedance
Tuner Presets	16 stations each for FM and AM
Clock	24-hour display
Timer Functions	Play timer, Sleep timer
Sound Effects	Preset EQ, BASS/TREBLE, RE-MASTER, Sound Virtualizer
Maintenance	Clean with soft dry cloth; clean tape heads regularly
Safety	Class 1 laser product; do not open; keep away from moisture
Accessories Included	AC mains lead, remote control (N2QAYA000008)
Battery Requirements	8 x LR14 (C) for main power, 4 x R6/LR6 (AA) for memory backup
Reparability	Refer servicing to qualified personnel; no user serviceable parts

Frequently Asked Questions - RX-D53 PANASONIC

How do I set the clock on the Panasonic RX-D53?

Press [CLOCK/TIMER] repeatedly until 'CLOCK' appears, then use [|◀◀/◀◀] or [▶▶/▶▶] to adjust the time. Press [CLOCK/TIMER] to confirm. The clock uses a 24-hour format.

How can I use the play timer to wake up to music?

Set the clock first. Then press [CLOCK/TIMER] to select 'PLAY ON'. Set the start and end times using [|◀◀/◀◀] or [▶▶/▶▶], press [CLOCK/TIMER] after each. Press [∅ PLAY] to activate, then turn the unit off with [TAPE/OFF]. The timer will turn on the unit at the set time.

What types of discs can I play on the RX-D53?

The unit plays CD-DA (audio CDs), CD-R/RW in CD-DA or MP3 format, and MP3 discs. DualDisc digital audio may not play. Ensure discs are finalized and have the Compact Disc logo.

How do I connect a USB device and play MP3 files?

Reduce volume, connect the USB mass storage device to the USB port on the front. Press [USB ▶/II] to start play. Supported formats: MP3 files with .mp3 extension, FAT12/16/32 file systems. Maximum 2500 tracks and 255 albums.

Why is there no sound or distorted sound?

Check the volume level. Ensure the correct source is selected. If using an external device via MUSIC PORT, lower the input level if distortion occurs. Also, keep the AC mains lead away from the unit to avoid hum.

How do I clean the tape heads?

Use a cleaning tape (not included) regularly to maintain playback and recording quality. For the exterior, wipe with a soft, dry cloth. Do not use alcohol, thinner, or benzine.

Can I record from the radio to a cassette?

Yes. Tune to the desired station, insert a cassette with the erasure prevention tabs intact, and press [● REC]. The unit records from the currently selected source (radio, CD, USB, or music port). Volume and sound effects do not affect recording.

What should I do if the remote control stops working?

Check that batteries are inserted correctly (AA, polarity + and -). Replace if worn. Ensure there are no obstacles within 7 m of the sensor. If using battery power, the remote cannot turn on the unit; use the main unit's power button.

How do I preset radio stations automatically?

Press [FM/AM] to select the band. For RX-D53, press [PLAY MODE] to choose 'CURRENT' or 'LOWEST', then press [AUTO PRESET]. For RX-D48, just press [AUTO PRESET]. Up to 16 stations are preset in ascending order.

What is the battery life when using batteries?

With alkaline LR14 batteries, approximate life: radio broadcast 9 hours, CD playback 6 hours, tape playback 8 hours. Battery indicator flashes when low. The unit cannot be powered by batteries if the AC mains lead is connected.

USER MANUAL RX-D53 PANASONIC

Operating Instructions

使用说明书

Portable Stereo CD System

携带式立体声 CD 音响系统

Model No./型号

RX-D53

RX-D48

Illustration of a portable electronic device with two speakers and a front-mounted control panel (no text or symbols visible)

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Please keep this manual for future reference.

感谢您购买本产品。

These operating instructions are applicable for models RX-D53 and RX-D48.

RX-D53 : indicates features applicable to RX-D53 only.

RX-D48 : indicates features applicable to RX-D48 only.

Your unit may not look exactly the same as illustrated. Unless otherwise indicated, illustrations in these operating instructions are of RX-D53.

CLASS 1 LASER PRODUCT

Safety precautions

WARNING!

Unit

• To reduce the risk of fire, electric shock or product damage,
- Do not expose this unit to rain, moisture, dripping or splashing.
- Do not place objects filled with liquids, such as vases, on this unit.
- Use only the recommended accessories.
- Do not remove covers.
- Do not repair this unit by yourself. Refer servicing to qualified service personnel.

CAUTION	- LASER PROMOTION WHEN OPEN,DO NOT SEE IN TO BEAM,	POA 21 CER (Nov. 3)
CAUTION	- CLASS IS MINIBLE AND INVISIBLE LASER PROMOTION WHEN OPEN,DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS,	EROSSES - I - ADI Max 1M
VARNING	- KLAS IS MINING OCH OSYNING LASERSTRALME NIKAR DIANA DEL AR OPPERA, BETHRAVE EL STRALN DIRECT EXBIOM OPTIKET INSTRUMENT.
FORSITIG	- TINUSO OSOSIS LITERSTRALME KLAS IS M, NIRUJET EN ABENT, UNIDAT AT LELE PARED OPTIKE INSTRUMENT.
VARO!	- ANTARESSIA OLATE ALT. BA LOON IS MINIMAR, NAYANATONIVA, LASERSARTELA ALA GATO OPTICOLLA, FATELLA SUOHAN SATORENI.
VORSICHT	- SICHBARE AND LASER CHAPARE LASERSTRALME KLASSE IM, MEA NOBECKUNG QOSTPNET, NOCT DROFT ME OPTICOEN INSTRUMENTS BETACHETEL.
ATTENTION	- RAVONEMENT LASER VIRBLE ET INVISIBLE, CLASSE IN, EN CAS STOUPTURE,NE PAS REGAINED DIRECTAMENT A CADE DENTRIMENTAL OPOTIQUE.
PRECAUCION	- RADIACION LASER VIRBLE ET INVISIBLE DE CLASE IN AL ESTAS AMERTO,NO VEA DIRECTAMENTE CON INSTRUMENTOS OPTICOS.

Inside of product

CAUTION!

Unit

• To reduce the risk of fire, electric shock or product damage,
- Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated.
- Do not obstruct this unit's ventilation openings with newspapers, tablecloths, curtains, and similar items.
- Do not place sources of naked flames, such as lighted candles, on this unit.

• This unit is intended for use in tropical climates.

• Install this unit so that the AC mains lead can be unplugged from the socket outlet immediately if any problem occurs.

- This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.

- This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

- Avoid using or placing this unit near sources of heat. Do not leave it in an automobile exposed to direct sunlight for a long time with the doors and windows closed as this may deform the cabinet.

- Avoid cuts, scratches, or poor connections in the AC mains lead, as they may result in possible fire or electric shock hazard. Also, excessive bending, pulling or splicing of the lead should be avoided.

- Do not unplug the AC mains lead by pulling on the lead. To do so may cause premature failure or shock hazard.

- Do not operate this unit in a bathroom, as a potential shock hazard may result.

- When not in use, disconnect the AC mains lead from the household mains socket.

Batteries

- If this unit is not used for a long period of time or is used only from an AC power source, remove all the batteries to prevent potential damage due to possible battery leakage.

- Insert so the poles (+ and -) match those in the unit and the remote control.

- Do not mix old and new batteries.

- Do not use different types of batteries at the same time.

- Do not break open or short-circuit the battery.

- Do not charge the alkaline or manganese battery.

- Do not use the battery if the cover has peeled off.

- Do not heat or expose to flame.

- Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

- Remove the battery if you do not use the unit or the remote control for a long period of time. Keep in a cool, dark area.

- Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer.

- When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.

- If you see this symbol -

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

Note on AC mains lead (RX-D53 only)

(For Saudi Arabia and Kuwait only)

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differs according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

1. Replace the fuse and close or attach the fuse cover.

Table of contents

Safety precautions 2

Note on AC mains lead (RX-D53 only)....2

Supplied accessories 3

Power sources .... 3

Remote control 3

Overview of controls 4

Disc....5

Radio 6

USB (RX-D53 only) 6

Cassette tape 7

Clock and timers....7

Sound effects 8

Music port 8

Troubleshooting 8

Specifications 9

Maintenance....9

Supplied accessories

Check and identify the supplied accessories.

□ 1 x AC mains lead

□ 1 x Remote control

RX-D53 (N2QAYA000008)

RX-D48 (N2QAYA000009)

Power sources

Using the household mains socket

Connect the AC mains lead firmly to the unit and the household mains socket.

Rear view

Note:

- The included AC mains lead is for use with this unit only. Do not use it with other equipment.

- The unit is in the standby condition when the AC power supply cord is connected. The primary circuit is always "live" as long as the power cord is connected to an electrical outlet.

Using batteries (not included)

• Use only alkaline batteries.

- The unit cannot be powered by batteries if the AC mains lead is connected. Disconnect the AC mains lead from the unit to operate on battery power.

- The remote control cannot turn the unit on when batteries are used.

When to change the batteries

When the battery indicator begins flashing, replace all 8 of the batteries. It is also a good idea to replace all the batteries before recording.

Note:

Before any function starts, the battery indicator may flash although the batteries are not drained. The indicator will display its current status when the unit is powered from the household mains socket by using the AC mains lead.

Memory back-up

When the power supply is interrupted, the current time, timer settings and radio stations you have set are saved if you have inserted back-up batteries (not included).

- Use either alkaline or manganese batteries. - These batteries do not power the unit.

When to change the batteries

Bottom view

The batteries last about a year.

Connect the unit to AC power before replacing the batteries.

Before connecting or disconnecting the AC mains lead, press [■/▲, STOP/EJECT] to stop the tape and press [TAPE/OFF] to turn the unit off. The back-up batteries wear out faster if the cord is disconnected with the power still on.

Remote control

Insert the batteries (not included) observing the correct polarities (+, -).

Aim at the remote control signal sensor, avoiding obstacles, at a maximum range of 7 m directly in front of the unit.

Operations in these instructions are described mainly using the remote control, but you can perform the operations on the main unit if the controls are the same.

RX-D53

RX-D53

Hand pointing at a button with a magnified circular detail (no text or symbols visible)

Close-up of a printer's front panel with indicator lights and a control panel (no visible text or symbols)

① Tape mode/standby switch

- Press to switch the unit to standby mode.

② Play mode function

③ Numeric buttons

• To select a 2-digit number, press [10] once then the two digits.

• To select a 3-digit number, press [10] twice then the three digits.

Program delete function

5 Program function

6 Tuner (FM/AM) selection

⑦ Disc play or pause

8 Stop disc playback

EQ OFF selection RX-D48 (by remote control only)

9 RE-MASTER selection

⑩ Preset EQ selection

⑪ BASS selection

⑫ Track information display function

⑬ Tuning mode selection

⑭ MONO selection for FM mode

⑮ Play timer setting

16 Clock or timer setting

⑰ Sleep timer setting

18 Auto off function

RX-D53 Select either "ON A.OFF" or "OFF A.OFF".

RX-D48 Select either "ON" or "OFF".

This auto off function allows you to turn off the unit in disc or USB mode only after left unused for 10 minutes.

- Press the button to activate the function.

- Press the button again to cancel.

• The setting is maintained even if the unit is turned off.

19 Volume control

20 Muting function

- Press the button to activate the function.

- Press the button again or adjust the volume to cancel.

21 Repeat function

22 Program clear

23 USB play or pause RX-D53

Stop disc playback RX-D48

24 Music port selection

Pure technical diagram of a mechanical component with no visible text, numbers, or symbols

Headphone jack (PHONES)

Plug type: ∅ 3.5 mm stereo (not included) - Avoid listening for prolonged periods of

time to prevent hearing damage.

Excessive sound pressure from

earphones and headphones can cause hearing loss.

Listening at full volume for long periods may damage the user's ears.

25 Track skip or search, check program content, preset channel selection, tuning function, time adjustment, bass or treble adjustment Remote control: [I◄◄/◄◄] or [►►/►►I] Main unit: [-/◄◄] or [►►I/+]

26 Sound virtualizer function

⑳ TREBLE selection

23 [OK]: confirm selection ▲/▼: album selection

[◄/►] have the exact same functions as those of [◄◄/◄◄] or [►►/►►I]

29 MP3 information display RX-D53 Input level selection RX-D48

30 Input level selection RX-D53

Manual preset selection RX-D48

31 Auto preset selection

32 Cassette play operations

33 Cassette deck

34 Display panel

35 Music port jack

36 USB port RX-D53

37 Speakers

These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism.

38 Disc tray

39 Disc tray open or close

40 USB play or pause RX-D53

Music port selection RX-D48

⑫ Remote control signal sensor

Basic play

1 Press [▲, CD OPEN/CLOSE] to open the disc tray and then load the disc with the label facing up.
2 Press [▲, CD OPEN/CLOSE] again to close.
3 Press [CD ▶/II] to start play.

Stop playback	Press [■] during play.
Pause play	Press [CD ▶/■] during play.Press again to resume play.
Skip tracks	Press [I◀◀/◀◀] or [▶▶/▶▶] (main unit: [-/I◀◀] or [▶▶/+]).During RANDOM or 1-ALBUM RANDOM play, you cannot skip to tracks that have been played.
Search through tracks	CDPress and hold [I◀◀/◀◀] or [▶▶/▶▶] (main unit: [-/I◀◀] or [▶▶/+]) during play or pause.During program play (→ see right), or random play (→ see below, "Play Mode function"), you can search only within the track.
Skip album	MP3Press [▲/▼, ALBUM] in the play mode.Press [▲/▼, ALBUM] once and then the numeric buttons in the stop mode.

Play Mode function

CD MP3

Press [PLAY MODE] to select the desired mode.

1-TRACK Play one selected track on the disc.
RX-D53 ITR RX-D48 1-	Press the numeric buttons to select the track.
1-ALBUM RX-D53 IALBUM RX-D48 ALBUM	MP3Play one selected album on the disc.Press [▲/▼, ALBUM] to select the album.
RANDOM Play a disc randomly.
RX-D53 RND RX-D48 RND
1-ALBUM RANDOM RX-D53 IALBUM RND RX-D48 ALBUM RND	MP3Play all tracks in one selected album randomly.Press [▲/▼, ALBUM] to select the album.

Checking the track information

You can view the information of the current track from the display panel.

Press [DISPLAY] repeatedly during play or pause.

graph LR
    A["CD"] --> B["Elapsed play time ↔ Remaining play time"]
    C["RX-D53 MP3"] --> D["Elapsed play time ↔ Track name Album name"]

RX-D53 MP3

Press [MP3 INFO] repeatedly during play or pause.

ID3 (Album) ID3 (Track) ID3 (Artist) Elapsed play time

Note:

• This unit supports ver. 1.0 and 1.1 ID3 tags.
- ID3 is a tag embedded in MP3 track to provide information about the track.
- Titles containing text data that the unit does not support may be displayed differently.
- RX-D48 Display for MP3 shows only "Elapsed play time".

Note about using a DualDisc

The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so playback may not be possible.

Note on CDs

Choose discs with this mark:

• This unit can access up to 99 tracks.
- This unit can play MP3 files and CD-DA format audio CD-R/RW that have been finalised.
- It may not be able to play some CD-R/RW due to the condition of the recording.
- Do not use irregularly shaped disc.
- Do not use disc with labels and stickers that are coming off or with adhesive exuding from under labels and stickers.
- Do not attach extra labels or stickers on the disc.
- Do not write anything on the disc.

Advanced play

Repeat play

CD MP3

You can repeat program play or other selected play mode.

To activate

Press [REPEAT].

RX-D53

"ON REPEAT" and "are displayed.

RX-D48

"is displayed.

To cancel

Press [REPEAT] again.

RX-D53

"OFF REPEAT" is displayed and "is cleared.

RX-D48

"is cleared.

Program play

This function allows you to program up to 24 tracks.

CD

1 Press [CD ▶/II] and then [■].
2 Press [PROGRAM].
"PGM" is displayed.
3 Press the numeric buttons to select your desired track. Repeat this step to program other tracks.
4 Press [CD ▶/III] to start play.

MP3

1 Press [CD ▶/III] and then [■].
2 Press [PROGRAM].
"PGM" is displayed.
3 Press [▲/▼, ALBUM] to select your desired album.
4 Press [▶▶/▶▶] once and then the numeric buttons to select your desired track.
5 Press [OK].
Repeat steps 3 to 5 to program other tracks.
6 Press [CD ▶/II] to start play.

Cancel program mode	Press [PROGRAM] in the stop mode.
Replay the program	Press [PROGRAM] then [CD ▶/II] in the stop mode.
Check program contents	Press [I◀◀/◀◀] or [▶▶/▶▶I] (main unit: [-/I◀◀] or [▶▶/+]) when “PGM” is displayed in the stop mode.To check while programming, press [PROGRAM] twice after “PGM” appears, then press [I◀◀/◀◀] or [▶▶/▶▶I].
Add to the program	CDRepeat step 3 in the stop mode.MP3Repeat steps 3 to 5 in the stop mode.
Clear the last track Press [DEL] in the stop mode.
Clear all programmed tracks	Press [CLEAR] in the stop mode.“CLR ALL” RX-D53 (“CLEAR” RX-D48) is displayed.

Note:

• When you try to program more than 24 tracks, "PGM FULL" RX-D53 ("FULL" RX-D48) appears.

- The program memory is cleared when you open the disc tray.

Note on MP3

• Files are treated as tracks and folders are treated as albums.
  • This unit can access up to 999 tracks, 255 albums and 20 sessions.
• Disc must conform to ISO9660 level 1 or 2 (except for extended formats).
• To play in a certain order, prefix the folder and file names with 3-digits numbers in the order you want to play them.

Limitations on MP3 play

• If you have recorded MP3 on the same disc as CD-DA, only the format recorded in the first session can be played.
• Some MP3s may not be played due to the condition of the disc or recording.
• Recordings will not necessarily be played in the order you recorded them.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

Radio

Manual tuning

1 Press [FM/AM] to select "FM" or "AM".
2 Press [TUNE MODE] to select "MANUAL". RX-D53 If "PGM" is displayed, press [TUNE MODE] to clear it. RX-D48
3 Press [|◀◀/◀◀] or [▶▶/▶▶-l] (main unit: [-/l◀◀] or [▶▶/+/+]) to select the frequency of the required station.

To tune automatically, press and hold [|◄◄/◄◄] or [►►/►►] until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it finds a station.

• Auto tuning may not function when there is excessive interference.
• To cancel auto tuning, press [I◄◄/◄◄] or [►►/►►] once again.

To improve reception

FM: Extend the whip antenna and adjust its direction.

AM: Adjust the position of the unit.

To improve FM sound quality

When "FM" is selected

Press [FM MODE] to display "MONO".

To cancel

Press [FM MODE] again.

• MONO is also cancelled if the frequency is changed.
- Turn off "MONO" for normal listening.

Memory preset

Up to 16 stations each can be set in the FM and AM bands.

Preparation

Press [FM/AM] to select "FM" or "AM".

Automatic presetting

RX-D53

1 Press [PLAY MODE] repeatedly to select either "CURRENT" or "LOWEST".

CURRENT Tuning begins from the current frequency.

LOWEST Tuning begins from the lowest frequency.

2 Press [AUTO PRESET] to start presetting.

RX-D48

Press [AUTO PRESET] to start presetting.

The tuner presets all the stations it can receive into the channels in ascending order. When finished, the last station memorised is tuned in.

Manual presetting

1 Press [PROGRAM] RX-D53 ([MANUAL PRESET] RX-D48). "PGM" is displayed.
2 Within 10 seconds or so Press [i◄◄/◄◄] or [►►/►►] to tune to the required station.

3 Press [PROGRAM] RX-D53 ([MANUAL PRESET] RX-D48).
4 Press the numeric buttons to select a channel. The station occupying a channel is erased if another station is preset to that channel.
5 Repeat steps 2 to 4 to preset more stations.

Selecting a preset station

Press the numeric buttons to select a channel.

OR

1 Press [TUNE MODE] to select "PRESET". RX-D53 Press [TUNE MODE] to display "PGM". RX-D48
2 Press [|◀◀/◀◀] or [▶▶/▶▶] (main unit: [-/◀◀] or [▶▶/+/+]) to select the channel.

AM allocation setting (by main unit only)

This system can also receive AM broadcasts allocated in 10 kHz steps.

To change the step from 9 kHz to 10 kHz

1 Press and hold [FM/AM]. After a few seconds the display changes to a flashing display of the current minimum frequency.
2 Continue to hold down [FM/AM].

When the minimum frequency changes, release the button.

• To return to the original step, repeat the above steps.
• After the setting is changed, any previously preset frequency will be cleared.

USB (RX-D53 only)

MP3

The USB connectivity enables you to connect and play MP3 tracks from USB mass storage class. Typically, USB memory devices (bulk only transfer).

Preparation

Before connecting any USB mass storage device to the unit, ensure that the data stored therein has been backed up.

Note:

• It is not recommended to use a USB extension cable. The device connected via the cable will not be recognised by this unit.
• When you connect your digital audio player to the USB port, it charges all the time except in standby mode.

Basic play

1 Reduce the volume and connect the USB mass storage device to the USB port.
2 Press [USB ▶/III] to start play.

Stop playback	Press [■] during play. “RESUME” is displayed. The position is memorised. Press [USB ▶/■] to resume play. Press [■] again to clear the position.
Pause play	Press [USB ▶/■] during play. Press again to resume play.
Skip tracks	Press [◀◀/◀◀] or [▶▶/▶▶] (main unit: [-/i◀◀] or [▶▶/+]).
Skip album	Press [▲/▼, ALBUM] in the play mode. Press [▲/▼, ALBUM] once and then the numeric buttons in the stop mode.

Note on USB

Compatible devices

Devices which are defined as USB mass storage class:

• USB devices that support bulk only transfer.
  • USB devices that support USB 2.0 full speed.

Supported format

• Folders are defined as album.
• Files are defined as track.
• Track must have the extension ".mp3" or ".MP3".
• Only FAT12, FAT16 and FAT32 file systems are supported.
  • CBI (Control/Bulk/Interrupt) is not supported.
• A device using NTFS file system is not supported.
• Depending on the sector size, some files may not work.
  • Maximum album: 255 albums
  • Maximum track: 2500 tracks
  • Maximum track in one album: 999 tracks

Basic play

Use normal position tapes.

High position and metal position tapes can be played, but the unit will not be able to identify the characteristics of these tapes.

1 Press [TAPE/OFF].
2 Open the cassette operation buttons' lid.
3 Press [■/▲, STOP/EJECT] and insert the cassette.

Insert with the side to be played facing up and the exposed tape facing towards you. Close the deck by hand.

4 Press [▶, PLAY] to start play.

Stop tape playback	Press [■/▲, STOP/EJECT].
Pause play	Press [III, PAUSE].Press again to resume play.
Fast-forward and rewind	Press [◀◀, REW/REV] or [▶▶, FF/CUE] in the stop mode.
Search for a specific point	Press [◀◀, REW/REV] (to search backward) or [▶▶, FF/CUE] (to search forward) during playback.Play is resumed when the button is released.

Recording

Use normal position tapes.

High position and metal position tapes can be used, but the unit will not be able to record or erase them correctly.

Preparation

Wind up the source tape so recording can begin immediately.

1 Press [■/▲, STOP/EJECT] and insert the cassette to be recorded. Insert with the side to be recorded facing up and the exposed tape facing towards you.

2 Select the source to be recorded.

Disc 1. Insert the disc you want to record.Press [CD ▶/■] and then [■].2. Prepare the desired disc recording mode.Record programmed tracksProgram the tracks you want (→ page 5).Record specific albums or tracksPress [PLAY MODE] to select the desired mode(→ page 5).
Radio	Tune in the station (→ page 6).
USB RX-D53	1. Prepare the USB mass storage device for recording(→ page 6).2. Press [◀◀/◀◀] or [▶▶/▶▶] (main unit: [-/l◀◀]or [▶▶/+]) to select the desired track for recording.
Music port	Select music port (→ page 8).

3 Press [● REC] to start recording.

Stop recording	Press [■/▲, STOP/EJECT].
Record on the other side of the tape	Turn the cassette over and press [● REC].
Erase a recorded sound	1. Press [TAPE/OFF].2. Insert the recorded cassette.3. Press [● REC].

Note:

Changes to volume and sound quality do not affect recording.

Erasure prevention

The illustration shows how to remove the tabs to prevent recording. To record on the tape again, cover as shown.

To prevent recording

Tab for Side B Tab for Side A

To re-record

Adhesive tape

Note:

• Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism.
• Tape slack can get caught up in the mechanism and should be wound up before the tape is played.
• Endless tapes can get caught up in the deck's moving parts if used incorrectly.

Setting the clock

This is a 24-hour clock.

1 Press [CLOCK/TIMER].

Each time you press the button:

$$ \begin{array}{c} \text { CLOCK } \longrightarrow \text { PLAY ON } \ \text { Original display } \end{array} $$

2 Within 5 seconds or so

Press [|◀◀/◀◀] or [▶▶/▶▶] to set the time.

Holding down the button will speed up the time selection.

3 Press [CLOCK/TIMER] to finish setting the time.

Displaying the clock

Press [CLOCK/TIMER] to display the clock for few seconds.

Note:

- Reset the clock regularly to maintain accuracy.

- When the unit is in standby mode and it is powered by batteries, clock will not be displayed.

Using the play timer

You can set the timer to come on at a certain time to wake you up.

Preparation

- Turn the unit on and set the clock.

- Prepare the music source you want to listen to; disc, radio, USB (RX-D53 only) or music port source, and set the volume.

1 Press [CLOCK/TIMER] repeatedly to select the play timer.

2 Within 5 seconds or so

Press [|◀◀/◀◀] or [▶▶/▶▶] to set the starting time.

3 Press [CLOCK/TIMER] to confirm.

4 Repeat steps 2 and 3 to set the finishing time.

To activate the timer

5 Press [∅ PLAY] to turn on the timer.

$$ ⓧ P L A Y \leftrightarrow N o d i s p l a y (o f f) $$

6 Press [TAPE/OFF] to turn off the unit.

Change the settings	Repeat steps 1 to 4 and 6 (→ see above).
Change the source or volume	1. Press [∅ PLAY] to clear the timer indicator from the display.2. Make changes to the source or volume.3. Perform steps 5 and 6 (→ see above).
Check the settings (when the unit is on or in standby mode)	Press [CLOCK/TIMER] repeatedly to select "∅ PLAY" (there is no display when the unit is powered by batteries and is in standby mode).
Cancel	Press [∅ PLAY] to clear the timer indicator from the display.

Note:

• The play timer will start at the preset time, with the volume increasing gradually to the preset level.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated.

Using the sleep timer

This function enables you to turn off the unit automatically after the set time except in tape mode.

Press [SLEEP] repeatedly to select your desired time (in minutes).

To cancel

Press [SLEEP] repeatedly to select "OFF".

Changing the remaining time

Press [SLEEP] to show the remaining time, and press [SLEEP] again to select your desired time.

Note:
• The play and sleep timer can be used together.
- The sleep timer always has priority. Be sure not to overlap timer settings.

Sound effects

Changing the sound quality

Preset EQ

Press [PRESET EQ] (main unit: [SOUND EQ]) repeatedly to select your desired setting.

RX-D53

Clarifies higher frequencies

For background music

Adds gloss to vocal

Cancels the EQ selection

BASS or TREBLE

Enables you to enjoy the lower or higher pitch sound.

1 Press [BASS] or [TREBLE] to select your desired setting.

2 Press [|◀◀/◀◀] or [▶▶/▶▶] to adjust the level.

Note:

• The level of the pitch is between -4 to +4.
- Select "EQ OFF" to cancel BASS or TREBLE.

RE-MASTER

MP3

This feature reproduces the frequencies lost during recording (original soundtrack) to give you a sound closer to the original.

Press [RE-MASTER] repeatedly to select either "ON RE-MASTER" or "OFF RE-MASTER" RX-D53 ("ON R.M" or "OFF R.M" RX-D48).

Sound virtualizer

Enables you to add natural width and depth to the stereo sound.

Press [SOUND VIRTUALIZER] to display "||||".

Press the button again to cancel

Note:

• Recording is not affected by this feature.
• The actual effect depends on the source played.

Music port

You can connect a portable audio equipment and listen to the audio through this system.

Preparation

Switch off the equalizer function (if there is any) of the portable audio equipment before you plug into the MUSIC PORT jack. Otherwise, sound from the speaker may be distorted.

1 Plug the audio cord into the MUSIC PORT jack.
2 Press [MUSIC PORT].
3 Play the portable audio equipment.

Note:

Read the operating instructions of the portable audio equipment for details.

Level adjustment

You can select the sound input level of your portable audio equipment.

Press [INPUT LEVEL] to select your desired setting.

RX-D53

HIGH (high) ← LOW (low)

RX-D48

HI (high) ←O (low)

Note:

Select low if the sound is distorted when level high is activated.

Troubleshooting

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart do not solve the problem, consult your dealer for instructions.

Common problems

No response when remote control buttons are pressed.

• Check that the batteries are installed correctly (→ page 3).
• Replace the batteries if they are worn (→ page 3).
  The unit cannot be turned on from the remote control.
• Turn the unit on from the main unit if you are using batteries to power the unit.

Clock display is not shown when the unit is powered by batteries and is in standby mode.

- Connect to the household AC power in order to view the display (→ page 3, 7).

Distorted sound or no sound.

- Adjust the volume.

A "humming" sound can be heard during play.

- An AC mains lead or fluorescent light is near the unit. Keep other appliances and cords away from the unit.

"F76" is displayed.
• There is a power supply problem. Consult the dealer.
"U01" is displayed.
- Replace the batteries or use household AC power (→ page 3).

Discs

"ERROR" is displayed.

- Incorrect operation performed. Read the instructions and try again.

Incorrect display or play will not start.

• You have not inserted the disc correctly; insert it correctly.
  • Disc may be dirty. Wipe it clean.
• Replace the disc if it is scratched, warped, or non-standard.
• Condensation has formed: Wait 1 to 2 hours for it to evaporate.

Radio

A beat sound is heard.
- Turn the television off or move it away from the unit.
A low hum is heard during AM broadcast.
- Keep other appliances and cords away from the unit.

Cassette tape

Poor sound quality.

- Clean the heads (→ page 9).

Recording cannot be performed.

- If the erasure prevention tabs have been removed, cover the holes with adhesive tape (→ page 7).

The cassette cannot be ejected.

• The batteries are flat. Replace the batteries or connect to household AC power (→ page 3).
• Press [▶, PLAY] then [■/▲, STOP/EJECT].

USB (RX-D53 only)

"NO PLAY" is displayed.

- The USB drive format or its contents is/are not compatible with the system.

The USB drive or its contents cannot be read.

• Unplug the USB device and insert it again
• The USB host function of this product may not work with some USB devices.
• USB devices with storage capacity of more than 8 gigabytes may not work in some instances.

Slow operation of the USB device.

• Large file size or high memory USB flash drive takes longer time to read.

Note:

Select low if the sound is distorted when level high is activated.

Amplifier section

Output power 4 W x 2 (RMS MAX / DC)

PMPO output power 90 W

FM/AM tuner section

Frequency Modulation (FM)

Frequency range 87.50 MHz to 108.00 MHz (50 kHz step)

Amplitude Modulation (AM)

Frequency range 522 kHz to 1629 kHz (9 kHz step)

520 kHz to 1630 kHz (10 kHz step)

Terminals section

Headphone jack

Terminal Stereo, 3.5 mm jack (32 Ω)

Music port (front) jack

Sensitivity 100 mV, 4.7 k Ω

Terminal Stereo, 3.5 mm jack

Disc section

Disc played (8 cm or 12 cm)

(1) CD-Audio (CD-DA)

(2) CD-R/RW (CD-DA, MP3 *formatted disc)

(3) MP3

■ MPEG-1 Layer 3, MPEG-2 Layer 3

Bit rate

MP3 32 kbps to 320 kbps

Sampling frequency

CD 44.1 kHz MP3 32 kHz, 44.1 kHz, 48 kHz

Decoding

Beam source Semiconductor laser {wavelength 795 nm (CD)}

Frequency response 40 Hz to 20 kHz

Number of channels 2 channel, stereo

Wow and flutter Less than possible measurement data

Cassette deck section

Track system 4 track, 2 channel, stereo

Monitor system	Variable sound monitor
Recording system	AC bias 84 kHz
Erase system	Multi Pole magnet
Frequency response
NORMAL	50 Hz to 12 kHz

USB section (RX-D53 only)

USB port

Media file format support	MP3 (*.mp3)
USB device file system	FAT12, FAT16, FAT32
USB port power	500 mA (Max)

Speaker section

Speakers	Impedance 4 Ω
Full range	2 x 8 cm

General

Power supply
AC	220 V to 240 V, 50/60 Hz
Battery	12 V (8 x LR14, C)
Memory back-up	6 V (4 x R6/LR6, AA)
Power consumption 17 W
Battery life (use only alkaline batteries)
Radio broadcast	9 hours
Radio recording	9 hours
CD playback	6 hours
CD recording	7 hours
Tape playback	8 hours
Dimensions (W x H x D)	408 mm x 148 mm x 271 mm
Mass	RX-D53 8.2 kg without batteries (3.8 kg with batteries)
	RX-D48 8.1 kg without batteries (3.7 kg with batteries)
Operating temperature range	0°C to +40°C
Operating humidity range	35% to 80% (no condensation)
Power consumption in standby mode	2 W (240 V) (approximate)

Note:

1. Specifications are subject to change without notice.

Mass and dimensions are approximate.

1. Total harmonic distortion is measured by the digital spectrum analyzer.

Maintenance

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution.

• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that came with the cloth carefully.

Care of tape deck's heads

Clean the heads regularly to ensure good quality playback and recording. Use a cleaning tape (not included).

产品内部

目录

Illustration of a hand pointing at a button with a magnified circular detail (no text or symbols)

Close-up of a printer's front panel showing internal components (no visible text or symbols)

①磁带模式/待机开关

· 按此钮使本机进入待机状态。

② 播放模式功能

③ 数字键

Illustration of a computer monitor with ports and a keypad (no text or symbols visible)

头戴耳机插孔 (PHONES)

插头类型：∅ 3.5 mm 立体声。 (非附件)

基本播放

MP3 32 kHz, 44.1 kHz, 48 kHz

解码器

束源 半导体激光置 [波长 795 nm (光碟)]

频率反应

导数 双声道、立体声

晃抖度

抖度 低于测定限度数值

磁带座部份

磁迹系统 4 磁迹、双声道、立体声

监视器系统 可变音频监视器

录音系统 AC 偏压 84 kHz

抹消系统 多级磁铁

频率响应

4 1. PLAY [. played alatschign]

(RX-D48 [MANUAL PRESET]) RX-D53 [PROGRAM] 1

"PGM" بتم عرض

Diagram of a device with a lid and base, showing internal components and a tool (no text or symbols)

R6/LR6, AA

Close-up of a mechanical device with a control panel and indicator lights (no visible text or symbols)

Illustration of a hand pointing at a small circular object with an arrow, no text or symbols present

RX-D53
(PHONES)

CLASS 1 LASER PRODUCT

RX-D48 RX-D53

لأقطار Afghi

Illustration of a portable electronic device with two speakers and a control panel, shown from front and side views (no text or symbols visible)