KIV86VSF0S - Fridge BOSCH - Free user manual and instructions

Product type	Built-in combined fridge-freezer
Brand	Bosch
Model	KIV86VSF0S
Interior lighting	LED replaceable by a professional
Refrigerator compartment	With glass shelves, fruit and vegetable drawer, Cool-Fresh drawer
Freezer compartment	With shelves and bins for frozen food, telescopic shelf
Doors	Doors with adjustable shelves and hinges
Door gasket	Replaceable, deformable to fit
Power supply	Mains connection, 220-240 V, 50 Hz
Safety	Disconnect before repair, VDE 0701 instructions
Spare parts available	Door gasket, hinges, shelves, bins, LED spotlight, glass shelves
Repairability	Designed for consumer repair according to eco-design
Maintenance	Clean with soft cloth, no abrasives
Weight (estimated)	Approximately 65 kg
Dimensions (H x W x D estimated)	177 x 54 x 55 cm
Noise level (estimated)	38 dB
Climate class	SN-T
Total net volume (estimated)	280 L

Frequently Asked Questions - KIV86VSF0S BOSCH

How to replace the door gasket?

To replace the door gasket, open the door and remove the old gasket by pulling it out of the groove at the corners. Warm the new gasket with a hairdryer to slightly deform it, then push it into the groove starting from the corners. Make sure the groove is intact; if damaged, contact customer service.

Can I replace the LED lighting myself?

No, the LED spotlight must only be replaced by a qualified technician or customer service. The appliance must be disconnected for at least 60 seconds before any intervention. There is a risk of electric shock.

How to remove the refrigerator shelves?

To remove a shelf, open the door and pull the shelf forward until it unlocks. Lift it slightly to release it. Assembly is done in reverse order.

What to do if the door does not close properly?

First check the door gasket: if worn or deformed, replace it. You can also adjust the hinges if they are adjustable. If the problem persists, consult the assembly manual or contact customer service.

How to clean the fruit and vegetable drawer?

Remove the drawer by pulling it completely forward. Wash it with warm water and a mild detergent. Do not use abrasive products. Dry it before putting it back.

Where can I find spare parts for this model?

Original Bosch spare parts are available from customer service or authorized dealers. Part numbers (e.g., [00342013] for the protective cloth) are listed in the manual.

The appliance makes an unusual noise, what to do?

Check that it is level and not in contact with furniture. Normal operating noises include the compressor and refrigerant circulation. If the noise is abnormal, disconnect the appliance and contact a professional.

How to adjust the temperature?

The full user manual is not detailed here, but generally, a thermostat or touch screen allows you to adjust the refrigerator and freezer temperature. Consult the user guide provided with the appliance.

Food freezes in the refrigerator, why?

This may be due to a temperature set too low or food placed against the back wall. Check the thermostat setting and air circulation. Do not block the ventilation slots.

Can I use non-original parts for repair?

It is recommended to use only original spare parts to ensure safety and proper operation. Use of non-compliant parts may void the warranty and present risks.

USER MANUAL KIV86VSF0S BOSCH

Diagram of hands connecting a cable to a rectangular panel with shelves, showing structural details (no text or symbols)

Illustration of hands holding a cable with a black arrow indicating direction (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon above (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Ремонт

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

Diagram illustrating a cable penetration process with labeled components and directional arrows

Ремонт

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components and directional arrows indicating motion or assembly steps.

Technical diagram showing three-step installation of a mechanical component with numbered parts and exploded views.

Ремонт

1. 1. Свалете четирите винта (1).
2. Свалете долните панти (2)

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Пантите са свалени.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a black curved arrow indicating rotation (no text or symbols)

Рафтът е свален.

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a file drawer with labeled parts and directional arrows indicating movement or flow.

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Diagram of a mechanical assembly with a blue top component and a black upward arrow indicating motion (no text or symbols)

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing a door handle with two black arrows indicating downward motion (no text or symbols)

Diagram of a file drawer with a black arrow indicating direction, no text or symbols present

Diagram showing a door opening with labeled parts and directional arrows indicating movement or assembly.

Abstract graphic with a rectangular panel and two arrows pointing inward, no text or symbols present.

Ремонт

Diagram showing a tool interacting with a rectangular device, no text or symbols present

3D rendering of a rectangular device mounted on a wall with a red panel and cable, against a gray background (no text or symbols visible)

Illustration of hands connecting a cable to a rectangular panel with shelves (no text or symbols)

Illustration of hands holding a cable with a black arrow indicating direction (no text or symbols)

Isometric line drawing of a refrigerator with an eye icon above, showing shelves and drawers (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Popravak

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

Brtva vrata je postavljena.

Popravak

Diagram illustrating a cable being inserted into a device, showing wire routing from a cable to a multi-panel device.

Popravak

1. 1. Otpustite četiri vijka (1).

2. Gurnite gornja vrata prema van i uklonite ih (2).

≈ 5 mm ① ② ②

1. 1. Uklonite četiri vijka (1).

2. Uklonite zglobove (2).

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Zglobovi gornjih vrata su uklonjeni.

1. 1. Otpustite četiri vijka (1).

2. Gumite donja vrata prema van i uklonite ih (2).

≈ 5 mm ① ② ②

1. 1. Uklonite četiri vijka (1).

2. Uklonite zglobove (2).

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Zglobovi donjih vrata su uklonjeni.

Popravak

4.2.2 Postavljanje ravnog zgloba

▶ Postavite obratnim redoslijedom.

Popravak

Nastavak Torx TX20 6.3 mm (1/4") [00340865]

Teški, veliki uređaji!

Diagram illustrating a mechanical assembly with numbered steps and component illustrations

Popravak

1. 1. Uklonite četiri vijka (1).

2. Uklonite donje zglobove (2).

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Zglobovi su uklonjeni.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a curved arrow indicating rotation (no text or symbols)

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

1. Spustite izvlačnu policu i zaokrenite je bočno.

2. Izvlačna je polica uklonjena.

4.6.2 Postavljanje izvlačne police

▶ Postavite obratnim redoslijedom.

Popravak

4.7 Zamjena police odjeljka zamrzivača

Zahtjev:

Vrata su otvorena.

4.7.1 Uklanjanje police odjeljka zamrzivača

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Polica odjeljka zamrzivača je uklonjena.

4.7.2 Postavljanje police odjeljka zamrzivača

▶ Postavite obratnim redoslijedom.

Popravak

4.8 Zamjena spremnika za zamrznute namirnice

Zahtjev:

Vrata su otvorena.

4.8.1 Uklanjanje spremnika za zamrznute namirnice

1. Potpuno izvucite spremnik za zamrznute namimice (1).
2. Uklonite spremnik za zamrznute namimice (2).

Diagram showing a box with labeled parts and directional arrows indicating movement or flow

Spremnik za zamrznute namirnice je uklonjen.

4.8.2 Postavljanje spremnika za zamrznute namirnice

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

→ Spremnik je uklonjen.

Diagram of a mechanical assembly with a blue component and an upward arrow, no text or symbols present

1. Uklonite spremnik za voće i povrće.→44

2. 1. Pritisnite polugu ispod obje strane pregrade (1).
3. Povucite pregradu prema naprijed (2).

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

1. Podignite pregradu i zaokrenite je bočno prema van.

→ Pregrada je uklonjena.

Diagram showing two steps of a refrigerator drawer with arrows indicating direction and numbered instructions.

Spremnik za održavanje svježine je uklonjen.

Diagram showing a door handle assembly with labeled parts and directional arrows indicating movement or assembly.

Abstract graphic with a rectangular panel and two arrows pointing outward, no text or symbols present.

Popravak

Diagram of a screwdriver interacting with a rectangular device, no text or symbols present

3D rendering of a monitor mounted on a wall with a red panel, against a gray background (no text or symbols visible)

Illustration of hands connecting a cable to a rectangular panel with shelves, no text or symbols present

Illustration of hands holding a cable with a black arrow indicating direction (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Oprava

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

Diagram illustrating a device's cable penetration into a multi-panel storage unit, with labeled components and wiring paths.

Oprava

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components and directional arrows indicating motion or assembly steps.

Technical diagram showing three-step installation of a mechanical component with numbered parts and directional arrows indicating assembly.

Oprava

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a black curved arrow indicating rotation (no text or symbols)

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a box with numbered parts and directional arrows indicating flow or movement, likely illustrating a mechanical or electrical component.

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Diagram of a mechanical assembly with a blue component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing two steps of a refrigerator drawer with arrows indicating direction and numbered instructions.

Diagram showing a door handle assembly with labeled parts and directional arrows indicating movement or assembly.

0 N/A/S/N

Abstract graphic with two arrows pointing to a rectangular object, no text or symbols present

Oprava

Diagram of a tool interacting with a device, showing motion lines and a red highlighted section (no text or symbols)

3D rendering of a rectangular electronic device with a red panel and white components, set against a gray background (no text or symbols visible)

Illustration of hands connecting a cable to a rectangular panel with shelves (no text or symbols)

Illustration of hands holding a cable inside a rectangular frame with a curved arrow indicating rotation (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon above (no text or symbols)

Line drawing of a door handle with hand gestures indicating left and right motion (no text or symbols)

Reparation

1. Tryk hele pakningen trinvist i rillen.

Diagram of a hand interacting with a refrigerator drawer, showing multiple compartments and directional arrows indicating movement (no text or symbols)

Diagram showing a device interacting with a multi-panel device, illustrating the process from pin to output.

Reparation

Diagram showing a mechanical assembly with numbered components and directional arrows indicating motion or assembly steps.

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Technical diagram showing three-step installation of a mechanical component with numbered parts and exploded views.

Reparation

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a black curved arrow indicating rotation (no text or symbols)

Hylden er fjernet.

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a box with numbered parts and directional arrows indicating flow or movement, likely illustrating a mechanical or electrical component.

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Diagram of a mechanical assembly with a blue top component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing two steps of a refrigerator drawer with arrows indicating direction and numbered instructions.

Diagram showing a door opening with labeled parts and directional arrows indicating movement or assembly.

Abstract graphic with a document icon and two arrows pointing to it, set against a dark background (no text or symbols)

Reparation

Diagram of a tool interacting with a device, showing motion lines and a red highlighted section (no text or symbols)

1. Afbryd LED-spotlampens elektriske tilslutning.

3D rendering of a rectangular electronic device with a red panel and white components, set against a gray background (no text or symbols visible)

Illustration of hands connecting a cable to a rectangular panel with shelves (no text or symbols)

Illustration of hands holding a cable inside a rectangular frame with a curved arrow indicating rotation (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Reparatie

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with directional arrows (no text or symbols)

Diagram showing a hand holding a device connected to a 3D cabinet with multiple doors, illustrating the connection or assembly.

Reparatie

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components, likely illustrating a tool or component assembly.

Technical diagram showing mechanical assembly steps with numbered instructions for tool installation

Reparatie

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a curved arrow indicating rotation (no text or symbols)

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a box with labeled parts and directional arrows indicating flow or movement

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Diagram of a mechanical assembly with a blue top component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing two steps of a refrigerator drawer with arrows indicating direction and numbered instructions.

Diagram showing a door opening with labeled parts and directional arrows indicating movement or assembly.

Abstract graphic with a rectangular panel and two arrows pointing outward, set against a dark gray background (no text or symbols)

Reparatie

Diagram of a screwdriver interacting with a rectangular device, showing internal components and wiring (no text or symbols)

3D rendering of a rectangular electronic device with a red panel and white components, set against a gray background (no text or symbols visible)

Repair hints - Fridge-freezer

i Concerning this document.... 123

1.1 Important information.... 123

1.1.1 Purpose.... 123

1.2 Explanation of symbols 123

1.2.1 Danger levels.... 123

1.2.2 Hazard symbols 123

1.2.3 Structure of the warnings.... 124

1.2.4 General symbols.... 124

Safety....

2.1 General Safety instructions 125

2.1.1 All domestic appliances 125

Tools and aids....12

Repair

4.7 Replacing freezer compartment shelf.... 138

4.7.1 Removing freezer compartment shelf 138

4.7.2 Installing freezer compartment shelf.... 138

4.8 Replacing frozen food container.... 139

4.8.1 Removing frozen food container 139

4.8.2 Installing frozen food container 139

4.9 Replacing fruit and vegetable container 140

4.9.1 Removing fruit and vegetable container 140

4.9.2 Installing fruit and vegetable container 140

4.10 Replacing partition and cover of fruit and vegetable container.... 141

4.10.1 Removing partition and cover of fruit and vegetable container ..... 141

4.10.2 Installing partition and cover of fruit and vegetable container.... 141

4.11 Replacing cool-fresh container.... 142

4.11.1 Removing cool-fresh container 142

4.11.2 Installing cool-fresh container.... 142

4.12 Replacing extendable container 143

4.12.1 Removing extendable container 143

4.12.2 Installing extendable container 143

4.13 Replacing LED spot light 144

4.13.1 Removing LED spot light.... 144

4.13.2 Installing LED spot light 145

i Concerning this document

1.1 Important information

1.1.1 Purpose

These repair hints support consumer to repair appliances by himself according to the applicable eco-design regulation (as of 03/2021).

They contain information how to exchange defined spare parts including warnings and risks.

In case of questions, please contact our customer service. We will only be liable for damages if the repair hints have been followed properly.

1.2 Explanation of symbols

1.2.1 Danger levels

The warning levels consist of a symbol and a signal word. The signal word indicates the severity of the danger.

Warning level Meaning
Danger	Non-observance of the warning message will result in death or serious injuries.
Warning	Non-observance of the warning message could result in death or serious injuries.
Caution	Non-observance of the warning message could result in minor injuries.
Notice	Non-observance of the warning message could result in damage to property.

Table 1: Danger levels

1.2.2 Hazard symbols

Hazard symbols are symbolic representations which give an indication of the kind of danger.
The following hazard symbols are used in this document:

	Hazard symbol Meaning
		General warning message
		Danger from electrical voltage
		Risk of explosion
		Danger of cuts
		Danger of crushing

i Concerning this document

Hazard symbol Meaning
		Danger from hot surfaces
		Danger from strong magnetic field
		Danger from non-ionizing radiation

Table 2: Hazard symbols

1.2.3 Structure of the warnings

Warnings in this document have a standardised appearance and a standardised structure.

Type and source of danger!

Possible consequences of ignoring the danger / warning.

▶ Measures and prohibitions for preventing the danger.

The following example shows a warning that warns against electric shock due to live parts. The measure for avoiding the danger is mentioned.

Risk of electric shock due to live parts!

Death by electrocution

- Disconnect appliances from electrical supply at least 60 seconds before starting repairs.

1.2.4 General symbols

The following general symbols are used in this document:

Gen. symbol Meaning
	Identification of a special tip (text and/or graphic)
	Identification of a simple tip (only text)
	Identification of a link to a video tutorial

Gen. symbol Meaning
	Identification of required tools
	Identification of required preconditions
	Identification of a condition (if ..., then ...)
	Identification of a result
[Start] Identification of a key or button
[00123456] Identification of a material number
Status Identification of displayed text / window(in the appliance's display)

Table 3: General symbols

Safety

2.1 General Safety instructions

2.1.1 All domestic appliances

Risk of electric shock due to live parts!

• Errors by repairs involving electrical components can lead to electrical shock!
  ■ Disconnect the appliance from the mains for at least 60 seconds before starting work.
  ■ After the repair have a safety test according VDE 0701 or country-specific regulations performed.

Risk of injury from sharp edges!

■ Wear protective gloves.

Risk of crushing during repair, maintenance, troubleshooting and service due to heavy and moving components

■ Wear protective shoes.
■ Secure heavy components from falling down.
■ Do not stick body parts into moving components.

Risk to the appliance's safety / function!

■ Only use original spare parts.

Risk of damage to electrostatically sensitive components (ESDs)!

- Do not touch the modules, including connections and conductor paths.

Tools and aids

Designation Details Images
Protection cloth[00342013]	60 cm x 50 cm
Torx Bit TX20[00340865]	6,3 mm (1/4")
Special tool[00342180]

Repair

1. Release door gasket from the groove on right and left corner.

Illustration of hands connecting a cable to a door panel with shelves (no text or symbols)

1. Pull out door gasket from groove.

Illustration of hands holding a cable with a black arrow indicating direction (no text or symbols)

Door gasket is removed.

	Thickness of new door gasket may deviate slightly from thickness of old door gasket. This will not affect closing behavior and long-term function.
	If your appliance has adjustable hinges or hinge attachments, you can optimize the closing behavior subsequently.
	Small side holes in door gasket are functional (required for ventilation). These are not production faults.

Repair

1. Check groove for gasket for damage.

Isometric line drawing of a wall-mounted shelf with an eye icon (no text or symbols)

1. (if) If groove for gasket is it is damaged.

2. Contact customer service.

3. i Slight deformation of door gasket is normal and does not affect its function. It is recommended to straighten door gasket before inserting it into appliance.

Heat door gasket with a hair dryer or hot water and manually reshape it.

1. Push corners of gasket at the top and bottom to the groove.

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Repair

1. Press whole gasket step by step into the groove.

Diagram of a hand interacting with a refrigerator drawer, showing multiple compartments and directional arrows indicating movement (no text or symbols present)

Door gasket is installed.

Repair

4.2 Replacing flat hinge

Required tools:

Torx Bit TX20 6,3 mm (1/4") [00340865]

Warning Heavy, bulky appliances! Back and muscle injuries • Appliance door removal op trained specialists. • To move the appliance, two • Use only suitable tools and

Prerequisite:

√ Appliance is disconnected from power supply.
√ Furniture door are removed. See Installation Instruction.
√ Door is open.

graph LR
    A["Take care that hinges do not close during removal / installation."] --> B["Initial Care: Screen with question mark"]
    B --> C["Step 1: Hinge is open, then drops vertically"]
    C --> D["Step 2: Hand is open, then drops vertically"]
    D --> E["Step 3: Hand is open, then drops vertically"]
    E --> F["Warning: Hand holds hand, hand is open, hand is open again"]

1. Remove four hinge covers.
   

Diagram illustrating a device's cable penetration into a multi-panel storage unit, with labeled components and wiring paths.

Repair

2.1. Loosen four screws (1).

1. Slide out and remove upper door (2).

≈ 5 mm ① ② ②

1. 1. Remove four screws (1).

2. Remove hinges (2).

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Upper door hinges are removed.

1. 1. Loosen four screws (1).

2. Slide out and remove lower door (2).

≈ 5 mm ① ② ②

1. 1. Remove four screws (1).

2. Remove hinges (2).

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

→ Lower door hinges are removed.

Repair

4.2.2 Installing flat hinge

▶ Install in reverse order.

Repair

4.3 Replacing sliding hinge

Required tools:

Torx Bit TX20 6,3 mm (1/4") [00340865]

Warning Heavy, bulky appliances! Back and muscle injuries • Appliance door removal op trained specialists. • To move the appliance, two • Use only suitable tools and

Prerequisite:

√ Appliance is disconnected from power supply.
√ Furniture door and appliance door are separated. See Installation Instruction.

4.3.1 Removing sliding hinge

1. 1. Unscrew two screws (1).

2. Remove upper door upper hinge (2).

3. Remove upper door (3).
4. Unscrew two screws (4).
5. Remove lower door upper hinge (5).
6. Remove lower door (6).

Technical diagram showing mechanical assembly steps with numbered components and directional arrows indicating movement

Repair

1. 1. Remove four screws (1).

2. Remove lower hinges (2).

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Hinges are removed.

4.3.2 Installing sliding hinge

▶ Install in reverse order.

Repair

4.4 Replacing door rack

Prerequisite:

√ Door is open.

▶ Lift door rack upwards.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Door rack is removed.

▶ Install in reverse order.

Repair

4.5 Replacing shelf

Prerequisite:

Door is open.

4.5.1 Removing shelf

▶ Pull out shelf.

Illustration of hands holding a tablet with a black curved arrow indicating rotation (no text or symbols)

Shelf is removed.

4.5.2 Installing shelf

▶ Install in reverse order.

Repair

4.6 Replacing extendable shelf

Prerequisite:

√ Door is open.

4.6.1 Removing extendable shelf

1. Pull out extendable shelf until the locking catch is released.

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

1. Lower extendable shelf and swing it out to the side.

2. ➕ Extendable shelf is removed.

4.6.2 Installing extendable shelf

▶ Install in reverse order.

Repair

4.7 Replacing freezer compartment shelf

Prerequisite:

√ Door is open.

4.7.1 Removing freezer compartment shelf

▶ Pull out freezer compartment shelf.

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Freezer compartment shelf is removed.

4.7.2 Installing freezer compartment shelf

▶ Install in reverse order.

Repair

4.8 Replacing frozen food container

Prerequisite:

√ Door is open.

4.8.1 Removing frozen food container

1. Pull out frozen food container all the way (1).
2. Remove frozen food container (2).

Diagram showing a box with numbered parts and directional arrows indicating flow or movement, likely illustrating a mechanical or electrical component.

Frozen food container is removed.

4.8.2 Installing frozen food container

▶ Install in reverse order.

Repair

4.9 Replacing fruit and vegetable container

Prerequisite:

Door is open.

4.9.1 Removing fruit and vegetable container

▶ 1. Pull container out all the way (1).

1. Remove container (2).

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Container is removed.

4.9.2 Installing fruit and vegetable container

▶ Install in reverse order.

Repair

4.10 Replacing partition and cover of fruit and vegetable container

Prerequisite:

Door is open.

4.10.1 Removing partition and cover of fruit and vegetable container

1. Remove glass plate from partition.

Diagram of a mechanical assembly with a blue top component and a black upward arrow indicating motion (no text or symbols)

1. Remove fruit and vegetable container.→ Page 140

2. 1. Press lever on the underside on both partition sides (1).
3. Pull the partition forwards (2).

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

1. Lift the partition and swivel it out to the side.

Partition is removed.

1. 1. Lift the cover of fruit and vegetable container.

2. Pull cover of fruit and vegetable container forwards and swivel it out to the side.

Cover of fruit and vegetable container is removed.

4.10.2 Installing partition and cover of fruit and vegetable container

▶ Install in reverse order.

Repair

4.11 Replacing cool-fresh container

Prerequisite:

√ Door is open.

4.11.1 Removing cool-fresh container

▶ 1. Tilt cool-fresh container forwards (1). 2. Remove cool-fresh container (2).

Diagram illustrating airflow or ventilation process in a refrigerator, showing two steps with arrows indicating direction of airflow.

Cool-fresh container is removed.

4.11.2 Installing cool-fresh container

▶ Install in reverse order.

Repair

4.12 Replacing extendable container

Prerequisite:

√ Door is open.

4.12.1 Removing extendable container

▶ 1. Tilt extendable container forwards (1).
2. Remove extendable container (2)

Diagram showing a door handle assembly with labeled parts and directional arrows indicating movement or assembly.

Extendable container is removed.

4.12.2 Installing extendable container

▶ Install in reverse order.

Repair

4.13 Replacing LED spot light

Required tools:

Special tool [00342180]
Slotted screwdriver Blade 2.4 mm x 0.4 mm x 60 mm, in the kit [00341820]

Your appliance features a maintenance-free LED light. These lights may be repaired by customer service or authorised technicians only!

Risk of electric shock due to live parts!

Danger to life through electric shock in case of improper repair - Electric parts should be repaired by a qualified electricians. - After the repair have a safety test according VDE 0701 or country-specific regulations performed.

Risk of electric shock due to live parts!

Death by electrocution - Disconnect appliances from electrical supply at least 60 seconds before starting repairs.

Sharp edges!

Cut injuries ▶ Wear protective gloves.

Prerequisite:

√ Appliance is disconnected from power supply.
√ Door is open.
√ Fridge compartment shelves are removed.

4.13.1 Removing LED spot light

1. Release LED spot light cover.

0 W/3/16

1. Pull LED spot light cover inwards and simultaneously push forwards.

Abstract graphic with two arrows pointing to a rectangular object, no text or symbols present

Repair

1. Detach LED spot light module.

Diagram of a screwdriver inserted into a rectangular device with a red clip, showing mechanical components (no text or symbols)

1. Disconnect LED spot light electrical connection.

3D rendering of a rectangular device with attached red panel and white circular elements, no visible text or symbols

LED spot light is removed.

4.13.2 Installing LED spot light

▶ Install in reverse order.

Remonditeave - Kombikülmik

i Selle dokumendiga seoses 147

1.1 Tähtis teave 147

1.1.1 Eesmärk 147

1.2 Sümbolite selgitus 147

1.2.1 Ohutasemed.... 147

Illustration of hands connecting a cable to a rectangular panel with shelves (no text or symbols)

Illustration of hands holding a cable with a black arrow indicating direction (no text or symbols)

Isometric line drawing of a door frame with shelves and an eye icon (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Remont

1. Vajutage terve tihend jupphaaval soonde.

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

graph TD
    A["Veenduge, et hinged eemaldamise/paigaldamise ajal ei sulguks."] --> B["Hand gesture: hand holding a hand, hand pointing to a tool, hand pressing a grip, hand holding a hand with warning symbol"]
    B --> C["Warning symbol: hand with exclamation mark"]

1. Eemaldage neli hinge katet.
   

Diagram illustrating a cable or cable being inserted into a device, with magnified view showing internal structure and wire connections.

Remont

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components and directional arrows indicating motion or assembly steps.

Technical diagram showing mechanical assembly steps with numbered instructions for tool installation

Remont

1. 1. Eemaldage neli kruvi (1).

2. Eemaldage alumised hinged (2).

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a curved arrow indicating rotation (no text or symbols)

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a door with labeled parts and directional arrows indicating movement or flow

Diagram showing a cabinet with labeled parts and directional arrows indicating movement or flow

Diagram of a mechanical assembly with a blue component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing two steps of a refrigerator drawer with arrows indicating direction and numbered instructions

Diagram showing a door handle assembly with labeled parts and directional arrows indicating movement or assembly.

0 N/A/5/16

Abstract graphic with a rectangular object and two arrows pointing outward, set against a dark background with faint white patterns (no text or symbols)

Remont

Diagram of a tool interacting with a device, showing motion lines and a red highlighted section (no text or symbols)

3D rendering of a rectangular electronic device with a red panel and white components, set against a gray background (no text or symbols visible)

Diagram of hands connecting a cable to a rectangular panel with shelves, showing structural components (no text or symbols)

Illustration of hands holding a cable inside a rectangular frame with a curved arrow indicating rotation (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon above (no text or symbols)

Line drawing of a door handle with hand gestures indicating left and right motion (no text or symbols)

Korjaus

Diagram of a hand interacting with a refrigerator drawer, showing multiple compartments and directional arrows indicating movement (no text or symbols present)

graph TD
    A["Huolehdi siitä, että saranat eivät sulkeudu poistamisen/asentamisen aikana."] --> B["Hand with hand gesture"]
    B --> C["Warning symbols: hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand, hand"]

Diagram showing a device being connected to a 3D panel with black lines indicating light paths, including a magnified view of the device's internal structure.

Korjaus

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components, likely illustrating a disassembly or mounting process.

Technical diagram showing mechanical assembly steps with numbered components and directional arrows indicating movement

Korjaus

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a curved arrow indicating rotation (no text or symbols)

Hylly on poistettu.

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a box with numbered parts and directional arrows indicating flow or movement, likely illustrating a mechanical or electrical component.

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Diagram of a mechanical assembly with a blue top component and a black upward arrow indicating motion (no text or symbols)

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing two steps of a refrigerator drawer with arrows indicating direction and numbered instructions.

Cool-fresh-lokero on poistettu.

4.11.2 Cool-fresh-lokeron asennus

Diagram illustrating a door handle assembly with labeled parts and directional arrows indicating movement or assembly.

Abstract graphic with two arrows pointing to a rectangular object, no text or symbols present

Korjaus

1. Irrota LED-kohdevalomoduuli.

Diagram of a tool interacting with a device, showing motion lines and a red highlighted section (no text or symbols)

3D rendering of a rectangular electronic device with a red panel and white components, set against a gray background (no text or symbols visible)

Illustration of hands connecting a cable to a door frame with shelves (no text or symbols)

1. Retirer le joint de porte de la rainure.

Illustration of hands holding a cable inside a rectangular frame with a curved arrow indicating rotation (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Réparation

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

Diagram showing a device being connected to a multi-chamber refrigerator, with labeled components and wiring connections.

Réparation

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Technical diagram showing three-step installation of a mechanical component with numbered parts and exploded views.

Réparation

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a black curved arrow indicating rotation (no text or symbols)

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a box with labeled parts and directional arrows indicating movement or flow

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Le bac est retiré.

Diagram of a mechanical assembly with a blue top component and a black upward arrow indicating motion (no text or symbols)

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing two steps of lifting a refrigerator panel with black arrows indicating downward motion.

Diagram showing a door handle assembly with labeled parts and directional arrows indicating movement or adjustment.

0 N/A/5/6

Abstract graphic with a document icon and arrows, no readable text or symbols

Réparation

Diagram of a tool interacting with a device, showing motion lines and a red highlighted section (no text or symbols)

3D rendering of a rectangular electronic device with a red panel and white components, set against a gray background (no text or symbols visible)

Diagram of hands connecting a cable to a door panel with shelves, showing structural components (no text or symbols)

Illustration of hands holding a cable with a black arrow indicating direction (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Instandsetzen

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with directional arrows (no text or symbols)

Diagram showing a device being connected to a multi-panel device, with an arrow indicating the connection direction.

Instandsetzen

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Technical diagram showing three-step installation of a mechanical component with numbered parts and exploded views.

Instandsetzen

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a black curved arrow indicating rotation (no text or symbols)

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a refrigerator with labeled parts and directional arrows indicating movement or flow

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Diagram of a mechanical assembly with a blue top component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing two steps of a refrigerator drawer with arrows indicating direction and numbered instructions.

Diagram showing a door opening with labeled parts and directional arrows indicating movement or assembly.

Abstract graphic with a document icon and arrows, no readable text or symbols

Instandsetzen

Diagram of a tool interacting with a device, showing motion lines and a red highlighted section (no text or symbols)

3D rendering of a rectangular electronic device with a red panel and white components, set against a gray background (no text or symbols visible)

Illustration of hands connecting a cable to a storage unit panel (no text or symbols)

Illustration of hands connecting a cable to a wall-mounted panel with a curved arrow indicating rotation (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Επισκευή

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

Diagram showing a device being connected to a multi-panel storage unit, with an arrow indicating the connection direction.

Επισκευή

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components and directional arrows indicating motion or assembly steps.

Technical diagram showing three-step installation of a mechanical component with numbered parts and exploded views.

Επισκευή

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

To páfi pórtas éxei aφαιρεθεί.

Illustration of hands holding a tablet with a curved arrow indicating rotation (no text or symbols)

To páφι αφαιρέθηκε.

Diagram showing a mechanical assembly with an arrow indicating direction and a blue component, no text or symbols present.

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a box with labeled parts and directional arrows indicating flow or movement

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Diagram of a mechanical assembly with a blue top component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing two steps of a refrigerator door opening with arrows indicating direction and numbered instructions.

Diagram illustrating a door handle assembly with labeled parts and directional arrows indicating movement or assembly.

To theo kottiko surtári afaipéthke.

Abstract graphic with a document icon and two arrows pointing right, set against a dark gray background (no text or symbols)

Επισκευή

Diagram of a tool interacting with a device, showing motion lines and a red highlighted section (no text or symbols)

3D rendering of a rectangular electronic device with a red panel and white components, set against a gray background (no text or symbols visible)

Illustration of hands connecting a cable to a rectangular panel with shelves (no text or symbols)

Illustration of hands holding a cable inside a rectangular frame with a curved arrow indicating rotation (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon above (no text or symbols)

Line drawing of a door handle with hand gestures indicating left and right motion (no text or symbols)

Javítás

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

graph TD
    A["Window with arrow"] --> B["Hand gesture: unknown eye"]
    B --> C["Warning sign: is open and is open again"]

Diagram showing a device being connected to a multi-panel refrigerator, with arrows indicating signal flow.

Javítás

Diagram showing a mechanical assembly with numbered components and directional arrows indicating motion or assembly steps.

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Technical diagram showing three-step installation of a mechanical component with numbered parts and directional arrows indicating assembly.

Javítás

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a curved arrow indicating rotation (no text or symbols)

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a box with labeled parts and directional arrows indicating movement or flow

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Diagram of a mechanical assembly with a blue component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing two steps of a refrigerator drawer with arrows indicating direction and numbered instructions.

Diagram illustrating a door handle assembly with labeled parts and directional arrows indicating movement or assembly.

0 N/A/S/B

Abstract graphic with a document icon and arrows, no readable text or symbols

Javítás

Diagram of a tool interacting with a device, showing motion lines and a red highlighted section (no text or symbols)

3D rendering of a rectangular electronic device with a red panel and white components, set against a gray background (no text or symbols visible)

Diagram of hands connecting a cable to a rectangular panel with shelves, showing structural details (no text or symbols)

Illustration of hands holding a cable inside a rectangular frame with a curved arrow indicating rotation (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon above (no text or symbols)

Line drawing of a door handle with hand gestures indicating left and right motion (no text or symbols)

Riparazione

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

Diagram showing a device being connected to a 3D panel with black lines indicating light paths, including a magnified view of the device's internal structure.

Riparazione

Diagram showing a mechanical assembly with numbered components and directional arrows indicating motion or assembly steps.

Diagram showing a mechanical assembly with numbered components, likely illustrating a disassembly or mounting process.

Technical diagram showing three-step installation of a mechanical component with numbered parts and exploded views.

Riparazione

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a curved arrow indicating rotation (no text or symbols)

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a box with labeled parts and directional arrows indicating movement or flow

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Diagram of a mechanical assembly with a blue top component and a black upward arrow indicating motion (no text or symbols)

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram illustrating airflow or ventilation process in a refrigerator, showing two steps with arrows indicating direction of airflow.

Diagram illustrating a door handle assembly with labeled parts and directional arrows indicating movement or assembly.

Abstract graphic with a rectangular panel and two arrows pointing outward, no text or symbols present.

Riparazione

Diagram of a tool interacting with a device, showing motion lines and a red highlighted section (no text or symbols)

3D rendering of a rectangular electronic device with a red panel and white components, set against a gray background (no text or symbols visible)

Illustration of hands connecting a cable to a rectangular panel with shelves (no text or symbols)

Illustration of hands holding a cable inside a rectangular frame with a curved arrow indicating rotation (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Remonts

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

Diagram illustrating a device's cable penetration into a multi-chamber storage unit, with labeled components and wiring paths.

Remonts

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components and directional arrows indicating motion or assembly steps.

Technical diagram showing mechanical assembly steps with numbered instructions for lifting or adjusting a component.

Remonts

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Viras ir nonemtas.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a curved arrow indicating rotation (no text or symbols)

Plaukts ir iznemts.

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a box with labeled parts and directional arrows indicating movement or flow

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Tvertne ir iznemta.

4.9.2 Auglu un dârzenu tvertnes uzstâdîsana

Diagram of a mechanical assembly with a blue component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

1. Starpliku paceliet un sagaziet uz sāniem, lai iznemtu.

Diagram showing two steps of a refrigerator drawer with arrows indicating direction and numbered instructions.

Diagram showing a door opening with labeled parts and directional arrows indicating movement or assembly.

Abstract graphic with a rectangular block and two arrows pointing outward, no text or symbols present.

Remonts

1. Atvienojiet LED starmeša moduli.

Diagram showing a tool interacting with a rectangular device, no text or symbols present

1. Atvienojiet LED starmeša elektrisko savienojumu.

3D rendering of a rectangular device with attached red panel and white circular elements, no visible text or symbols

LED starmetis ir nonemts.

Illustration of hands connecting a cable to a rectangular panel with shelves (no text or symbols)

Illustration of hands connecting a cable to a wall-mounted panel with a black arrow indicating direction (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon above (no text or symbols)

Line drawing of a door handle with hand gestures indicating left and right motion (no text or symbols)

Remontas

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

Diagram illustrating a cable penetration process with labeled components and ray paths, showing cable insertion and output alignment.

Remontas

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components and directional arrows indicating motion or assembly steps.

Technical diagram showing three-step installation of a mechanical component with numbered parts and directional arrows indicating assembly.

Remontas

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Vyriai nuimti.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a black curved arrow indicating rotation (no text or symbols)

Lentyna išimta.

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a box with labeled parts and directional arrows indicating flow or movement

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Talpykla išimta.

Diagram of a mechanical assembly with a blue component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing two steps of a refrigerator door opening with arrows indicating direction and numbered instructions.

Diagram showing a door opening with labeled parts and directional arrows indicating movement or assembly.

Abstract graphic with a document icon and arrows, no readable text or symbols

Remontas

Diagram showing a tool interacting with a rectangular device, no text or symbols present

3D rendering of a rectangular device mounted on a wall with a red panel and cable, against a gray background (no text or symbols visible)

Illustration of hands connecting a cable to a rectangular panel with shelves (no text or symbols)

Illustration of hands holding a cable inside a rectangular frame with a curved arrow indicating rotation (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Reparasjon

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

graph TD
    A["Vær forsiktig så ikke hengsler lukkes under demontering/montering."] --> B["Hand gesture: hand holding a grip, hand pressing a hand gesture with warning symbol"]
    B --> C["Reaction: Questioning on hand gesture"]
    C --> D["Result: Hand gesture with hand gesture and warning symbol"]

Diagram showing a device being connected to a 3D cabinet with wires, illustrating the process of lighting or wiring.

Reparasjon

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components, likely illustrating a disassembly or mounting process.

De nedre dørhengslene er demontert.

Reparasjon

Technical diagram showing three-step installation of a mechanical component with numbered parts and directional arrows indicating assembly.

Reparasjon

1. 1. Fjern fire skruer (1).

2. Demonter nedre hengsler (2).

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a curved arrow indicating rotation (no text or symbols)

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Hyllen i fryseren er demontert.

4.7.2 Montering av hylle i fryser

Diagram showing a box with labeled parts and directional arrows indicating flow or movement

→ Beholderen for frysevarer er demontert.

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Beholderen er demontert.

Diagram of a mechanical assembly with a blue top component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram illustrating airflow or ventilation process in a refrigerator, showing two steps with arrows indicating direction of airflow.

Cool-Fresh-beholderen er demontert.

Diagram illustrating a door handle assembly with labeled parts and directional arrows indicating movement or repair.

Abstract graphic with a rectangular block and two arrows pointing outward, no text or symbols present.

Reparasjon

1. Løsne LED -spotlightmodulen.

Diagram of a tool interacting with a device, showing motion lines and a red highlighted section (no text or symbols)

3D rendering of a rectangular electronic device with a red panel and white components, set against a gray background (no text or symbols visible)

LED-spotlight er demontert.

Illustration of hands connecting a cable to a rectangular panel with shelves, no text or symbols present

Illustration of hands holding a cable inside a rectangular frame with a curved arrow indicating rotation (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Naprawy

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

Diagram showing a device being connected to a multi-panel storage unit, with an arrow indicating the connection direction.

Naprawy

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components and directional arrows indicating motion or assembly steps.

Technical diagram showing mechanical assembly steps with numbered instructions for tool installation

Naprawy

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a curved arrow indicating rotation (no text or symbols)

Półka jest wyjęta.

4.5.2 Montaż półki

Diagram showing a mechanical assembly with an arrow indicating direction and a blue component inside (no text or symbols)

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a box with labeled parts and directional arrows indicating movement or flow

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Diagram of a mechanical assembly with a blue top component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing two steps of a refrigerator drawer with arrows indicating direction and numbered instructions.

Diagram showing a door handle assembly with labeled parts and directional arrows indicating movement or force.

0 #/R/S/R

Abstract graphic with a rectangular panel and two arrows pointing outward, no text or symbols present.

Naprawy

Diagram of a tool interacting with a rectangular device, showing motion lines and no text or symbols

3D rendering of a rectangular electronic device with a red panel and white components, set against a gray background (no text or symbols visible)

Illustration of hands connecting a cable to a rectangular panel with shelves (no text or symbols)

Illustration of hands connecting a cable to a wall-mounted panel with a black arrow indicating direction (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Reparação

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

graph LR
    A["Assegure-se de que as dobradiças não fecham durante a remoção / instalação."] --> B["Hand gesture: Questioning with brain, Visionary, and hand gesture"]
    B --> C["Warning symbol: Hand with hand, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture, hand gesture"]

1. Remova quatro tampas de dobradiça.
   

Diagram showing a device being connected to a multi-panel storage unit, with labeled components and directional arrows.

Reparação

1. 1. Remova quatro parafusos (1).

2. Remova as dobradiças (2).

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

1. 1. Remova quatro parafusos (1).

2. Remova as dobradiças (2).

Diagram showing a mechanical assembly with numbered components, likely illustrating a tool or component assembly.

Technical diagram showing mechanical assembly steps with numbered components and exploded views

Reparação

1. 1. Remova quatro parafusos (1).

2. Remova as dobradiças inferiores (2).

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a black curved arrow indicating rotation (no text or symbols)

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a box with labeled parts and directional arrows indicating movement or flow

Diagram showing a cabinet with labeled parts and directional arrows indicating movement or flow

Diagram of a mechanical assembly with a blue top component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing two steps of a refrigerator door opening with arrows indicating direction and numbered instructions.

Diagram showing a door handle assembly with labeled parts and directional arrows indicating movement or force.

Abstract graphic with a rectangular panel and two arrows pointing outward, no text or symbols present.

Reparação

Diagram of a screwdriver inserted into a rectangular component with a red edge, against a dark background (no text or symbols)

3D rendering of a rectangular device mounted on a wall with a red panel and cable, against a gray background (no text or symbols visible)

Diagram of hands connecting a cable to a rectangular panel with shelves, showing structural details (no text or symbols)

Illustration of hands holding a cable inside a rectangular frame with a curved arrow indicating rotation (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Repararea

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with directional arrows (no text or symbols)

Cap torx TX20 6.3 mm (1/4") [00340865]

Diagram showing a hand holding a device connected to a 3D cabinet with black lines indicating light paths.

Repararea

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Balamalele uşii de sus sunt demontate.

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Balamalele uşii de jos sunt demontate.

Repararea

4.2.2 Montarea balamalei plate

Cap torx TX20 6.3 mm (1/4") [00340865]

Technical diagram showing three-step installation of a mechanical component with numbered parts and exploded views.

Repararea

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Balamalele sunt demontate.

4.3.2 Montarea balamalei glisante

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a curved arrow indicating rotation (no text or symbols)

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a box with labeled parts and directional arrows indicating movement or flow

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Diagram of a mechanical assembly with a blue top component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows indicating flow or movement.

Diagram showing two steps of a refrigerator drawer with arrows indicating direction and numbered instructions.

Diagram showing a door handle assembly with labeled parts and directional arrows indicating movement or force.

Abstract graphic with two arrows pointing to a rectangular object, no text or symbols present

Repararea

Diagram of a tool interacting with a device, showing motion lines and a red highlighted section (no text or symbols)

3D rendering of a rectangular electronic device with a red panel and white components, set against a gray background (no text or symbols visible)

Illustration of hands connecting a cable to a storage unit panel (no text or symbols)

1. Vytiahnite tesnenie z drážky.

Illustration of hands holding a cable inside a rectangular appliance with a curved arrow indicating rotation (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon above (no text or symbols)

Line drawing of a door handle with hand gestures indicating left and right motion (no text or symbols)

Oprava

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with directional arrows (no text or symbols)

Tesnenie dvierok je namontované.

Oprava

Diagram illustrating a cable penetration process with labeled components and directional arrows indicating signal flow.

Oprava

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components and directional arrows indicating motion or assembly steps.

Technical diagram showing three-step installation of a mechanical component with numbered parts and exploded views.

Oprava

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Závesy sú odobraté.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Polička v dvierkach je odobratá.

4.4.2 Montáž poličky do dvierok

Illustration of hands holding a tablet with a curved arrow indicating rotation (no text or symbols)

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Polica mraziaceho priestoru je odobratá.

4.7.2 Montáž police mraziaceho priestoru

Diagram showing a box with labeled parts and directional arrows indicating movement or flow

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Nádoba je odobratá.

Diagram of a mechanical assembly with a blue component and an upward arrow, no text or symbols present

1. Odoberte nádobu na ovocie a zeleninu.→476

2. 1. Stlačte páčku na spodnej strane oboch strán priehradky (1).
3. Potiahnite priehradku dopredu (2).

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

1. Zdvihnite priehradku a vyklopte ju nabok.

Priehradka je odobratá.

Diagram showing two steps of a refrigerator drawer with arrows indicating direction and numbered instructions.

Nádoba cool-fresh je odobratá.

Diagram showing a door handle assembly with labeled parts and directional arrows indicating movement or force.

Abstract graphic with a rectangular panel and two arrows pointing outward, no text or symbols present.

Oprava

Diagram showing a tool interacting with a rectangular device, no text or symbols present

3D rendering of a rectangular device with attached red panel and white circular elements, no visible text or symbols

Illustration of hands connecting a cable to a rectangular panel with shelves, no text or symbols present

1. Tesnilo vrat izvlecite iz utora.

Illustration of hands holding a cable with a black arrow indicating direction (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon (no text or symbols)

Line drawing of a door handle with hand gestures indicating left and right motion (no text or symbols)

Popravilo

1. Celotno tesnilo korak po koraku potisnite v utor.

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

Poškodbe hrbta in mišic

Diagram illustrating a cable penetration process with labeled components and ray paths, showing wire connection to a device panel.

Popravilo

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components and directional arrows indicating motion or assembly steps.

Poškodbe hrbta in mišic

Technical diagram showing three-step installation of a mechanical component with numbered parts and directional arrows indicating assembly.

Popravilo

1. 1. Odstranite štiri vijake (1).

2. Odstranite spodnja tečaja (2).

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a black curved arrow indicating rotation (no text or symbols)

Polica je odstranjena.

4.5.2 Namestitev police

- Namestite v obratnem vrstnem redu.

Popravilo

Diagram showing a mechanical or structural component with an arrow indicating downward motion, no text or symbols present.

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a box with labeled parts and directional arrows indicating movement or flow

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Diagram of a mechanical assembly with a blue top component and an upward arrow, no text or symbols present

1. Odstranite predal za sadje in zelenjavo.→500

2. 1. Pritisnite pritrdila na spodnji strani steklene plošče (1).
3. Pregrado potegnite k sebi (2).

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

1. Pregrado dvignite in jo z obračanjem na stran odstranite. → Pregrada je odstranjena.

2. 1. Dvignite polico nad predalom za sadje in zelenjavo.
3. Polico nad predalom za sadje in zelenjavo potegnite k sebi in jo z obračanjem na stran odstranite. → Polica nad predalom za sadje in zelenjavo je odstranjena.

4.10.2 Namestitev pregrade in police nad predalom za sadje in zelenjavo

▶ Namestite v obratnem vrstnem redu.

Popravilo

Diagram showing two steps of lifting a refrigerator panel with black arrows indicating downward motion.

Diagram illustrating a mechanical assembly with labeled parts and directional arrows indicating movement or force.

Abstract graphic with a document icon and arrows, no readable text or symbols

Popravilo

Diagram showing a tool interacting with a rectangular device, no text or symbols present

3D rendering of a rectangular device with attached red panel and white circular elements, no visible text or symbols

Diagram of hands connecting a cable to a rectangular panel with shelves, showing structural details (no text or symbols)

Illustration of hands holding a cable inside a rectangular frame with a curved arrow indicating rotation (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon, showing internal compartments and directional arrows (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Reparación

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

Diagram showing a device being connected to a multi-panel device, with an arrow indicating the connection direction.

Reparación

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components, likely illustrating a disassembly or mounting process.

Diagram illustrating a mechanical assembly with numbered steps and component illustrations

Reparación

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a black curved arrow indicating rotation (no text or symbols)

Diagram showing a mechanical or structural component with an arrow indicating direction, no text or symbols present

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a box with labeled parts and directional arrows indicating flow or movement

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Diagram of a mechanical assembly with a blue component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing two steps of a refrigerator drawer with arrows indicating direction and numbered instructions.

Diagram showing a door opening with labeled parts and directional arrows indicating movement or assembly.

Abstract graphic with a document icon and arrows, no readable text or symbols present

Reparación

Diagram of a tool interacting with a device, showing motion lines and a red highlighted section (no text or symbols)

3D rendering of a rectangular electronic device with a red panel and white components, set against a gray background (no text or symbols visible)

Illustration of hands connecting a cable to a rectangular panel with shelves (no text or symbols)

Illustration of hands holding a cable inside a rectangular frame, with an arrow indicating direction (no text or symbols)

Isometric line drawing of a wall-mounted shelf with an eye icon (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Reparation

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

Diagram illustrating a device's cable penetration into a multi-panel storage unit, with labeled components and wiring paths.

Reparation

Diagram showing a mechanical assembly with numbered components, likely illustrating a disassembly or mounting process.

Diagram showing a mechanical assembly with numbered components, likely illustrating a disassembly or mounting process.

Technical diagram showing mechanical assembly steps with numbered instructions for tool installation

Reparation

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Dörrhyllan har tagits bort.

4.4.2 Montera dörrhylla

Illustration of hands holding a tablet with a black curved arrow indicating rotation (no text or symbols)

Diagram showing a mechanical or structural component with an arrow indicating downward motion, no text or symbols present.

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Frysdelens hylla har tagits bort.

4.7.2 Montera frysdelens hylla

Diagram showing a door with labeled parts and directional arrows indicating movement or flow

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Diagram of a mechanical assembly with a blue component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing two steps of a refrigerator door opening with arrows indicating direction and numbered instructions.

Cool fresh-facket har tagits bort.

4.11.2 Montera cool fresh-fack

Diagram showing a door opening with labeled parts and directional arrows indicating movement or assembly.

0 N/A/5/16

Abstract graphic with a document icon and two arrows pointing right, set against a dark background (no text or symbols)

Reparation

1. Ta loss LED-spotlightmodulen.

Diagram of a tool interacting with a device, showing motion lines and a red highlighted section (no text or symbols)

1. Lossa LED-spotlightens elanslutning.

3D rendering of a rectangular electronic device with a red panel and white components, set against a gray background (no text or symbols visible)

LED-spotlighten har tagits bort.

4.13.2 Montera LED-spotlight

Illustration of hands connecting a cable to a rectangular panel with shelves (no text or symbols)

Illustration of hands holding a cable inside a rectangular frame, with a black arrow indicating direction (no text or symbols)

Isometric line drawing of a 3D wall-mounted device with multiple shelves and an eye icon (no text or symbols)

Line drawing of a refrigerator with hand gestures indicating side placement (no text or symbols)

Onarim

Diagram of a hand interacting with a refrigerator drawer, showing shelves and drawers with arrows indicating movement (no text or symbols)

graph LR
    A["Sökme / takma sırasında menteşelerin kapanmamasına dikkat edin."] --> B["Hand gesture: hand holding a hand with warning symbol"]
    B --> C["Warning: hand gestures hand down with head and hand pointing to hand with warning symbol"]
    C --> D["Warning: hand gestures hand down with head and hand pointing to hand pointing to hand with warning symbol"]

Diagram illustrating a cable being inserted into a device, showing wire routing from a cable to a multi-panel device.

Onarim

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Diagram showing a mechanical assembly with numbered components, likely illustrating a turning or disassembly process.

Technical diagram showing three-step installation of a mechanical component with numbered parts and exploded views.

Onarim

Diagram showing a mechanical assembly with labeled parts and directional arrows, including numbered annotations.

Diagram showing two mechanical components with upward arrows indicating motion or assembly (no text or symbols)

Illustration of hands holding a tablet with a curved arrow indicating rotation (no text or symbols)

Diagram showing a mechanical or structural component with an arrow indicating downward motion, no text or symbols present.

Diagram of a mechanical assembly with a blue panel and directional arrow (no text or symbols)

Diagram showing a door with labeled parts and directional arrows indicating movement or flow

Diagram showing a door handle with labeled parts and directional arrows indicating movement or flow.

Kap çıkartılmıştır.

Diagram of a mechanical assembly with a blue component and an upward arrow, no text or symbols present

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, likely illustrating a process or flow.

Diagram showing two steps of a refrigerator drawer with arrows indicating direction and numbered instructions.

Diagram illustrating a door handle assembly with labeled parts and directional arrows indicating movement or assembly.

Special tool [00342180]

Düz tornavida Biçak 2,4 mm x 0,4 mm x 60 mm,

Abstract graphic with two arrows pointing to a rectangular object, no text or symbols present

Onarim

Diagram of a screwdriver inserted into a rectangular component with a red edge, against a dark background (no text or symbols)

3D rendering of a rectangular device with attached red panel and white circular elements, no visible text or symbols