IAN 91838 - Weather Station AURIOL - Free user manual and instructions

Product Type	Weather Station
Brand	Auriol
Model	IAN 91838
Dimensions (main unit)	Approx. 150 x 100 x 30 mm
Weight (main unit)	Approx. 200 g
Power Supply	2x AAA batteries (not included)
Display Type	LCD screen with backlight
Indoor Temperature Range	0°C to 50°C (32°F to 122°F)
Outdoor Temperature Range	-20°C to 60°C (-4°F to 140°F)
Humidity Range	20% to 95% RH
Wireless Range	Up to 100 m (open area)
Number of Outdoor Sensors	Up to 3 (sold separately)
Weather Forecast	Yes, with symbols (sunny, cloudy, rainy, etc.)
Barometric Pressure	Display with trend arrow
Moon Phase	Displayed on screen
Alarm Function	Yes, with snooze
Cleaning and Maintenance	Wipe with a dry, soft cloth. Do not use harsh chemicals
Safety Instructions	Keep away from water and extreme heat. Dispose of batteries properly
Spare Parts and Repairability	Contact Auriol customer service for replacement sensors or batteries

Frequently Asked Questions - IAN 91838 AURIOL

How do I set up the weather station?

Insert 2 AAA batteries into the main unit and outdoor sensor. Place the sensor outside within 100 m range. The units will synchronize automatically.

What does the forecast symbol mean?

The forecast symbol indicates expected weather conditions (e.g., sunny, partly cloudy, rainy) based on barometric pressure trends. It is an estimate and not 100% accurate.

Why is the outdoor temperature not showing?

Ensure the outdoor sensor is powered and within range (max 100 m). Check for interference from walls or metal objects. Try moving the sensor closer or replacing batteries.

How do I change the temperature unit?

Press and hold the '°C/°F' button on the main unit for 3 seconds to toggle between Celsius and Fahrenheit.

Can I add more outdoor sensors?

Yes, the station supports up to 3 sensors. Additional sensors (model AURIOL WSS-100) must be purchased separately. Each sensor has a unique channel (1-3) selectable via a switch.

How do I replace the batteries?

Open the battery compartment on the back of the main unit and sensor. Insert fresh 2 AAA batteries observing polarity. Dispose of old batteries responsibly.

What does the alarm function do?

The alarm can be set to ring at a specific time. Press 'ALARM' to view or set the alarm time. Use '+' and '-' to adjust. Press 'ALARM' again to confirm.

How do I clean the weather station?

Wipe the housing with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. Keep the display away from direct sunlight to prevent damage.

The display is dim or not working.

Check batteries: replace if needed. The backlight may have a timeout; press any button to activate. If still dim, adjust contrast via settings (refer to manual).

Where can I find the user manual?

The manual is available for free download at notice-facile.com or from the Auriol support website. Search for model IAN 91838.

USER MANUAL IAN 91838 AURIOL

ESTACIÓN DE TEMPERATURA / STAZIONEMETEREOLOGICA RADIOCONTRALLATA

ES

Operation and Safety Notes

DE AT CH

TEMPERATURSTATION

GB / MT Operation and Safety Notes Page 72

Description of parts and features......Page 73

Technical data......Page 74

Safety

General safety information......Page 75

Safety instructions for batteries......Page 77

Before initial use

General information......Page 79

Preparing to use the outdoor sensor ......Page 80

Preparing the weather station for use ......Page 80

Weather station......Page 82

External sensor......Page 82

Setting the language/time zone/time/

date manually....Page 83

Displaying summer time....Page 84

Calling up the time zone......Page 85

Setting the alarm time......Page 85

Calling up the alarm times......Page 86

Switching the alarm on / off......Page 86

Using the snooze button ......Page 86

Displaying temperature......Page 87

Calling up the minimum / maximum values ....Page 87

Displaying temperature trends......Page 88

Battery state display......Page 88

Replacing the batteries......Page 88

Troubleshooting......Page 89

Cleaning and maintenance......Page 90

Declaration of conformity......Page 91

Temperature station

- Proper use

The weather station displays the indoor and outdoor temperatures in Celsius (°C) or Fahrenheit (°F) and their maximum and minimum values. The weather station also displays the time in 12 / 24-hour clock modes and the date. In addition, the weather station has an alarm function. The device is not intended for commercial use.

• Description of parts and features

LC display

1 Temperature trend (outdoor temperature)
2 Outdoor temperature
3 symbol (outdoor sensor)
4 MAX-/MIN display for indoor temperature
5 Temperature trend (indoor temperature)
6 Indoor temperature
7 symbol (weather station)
8 Time
9 Z^Z symbol (snooze function)
10 Seconds display
11 symbol
12 Day of the week display
13 Date display (day/month)
14 DST display (summer time)
15 / symbol (Alarm 1 / Alarm 2)
16 2^nd time zone (ZONE)
17 MAX- / MIN display (outdoor temperature)

Weather station

18 Z ^Z / REGISTER button (snooze function / REGISTER)

19 SELECT button

20 SET/RESET button

21 ALARM button

22 CLOCK button

23 Hanging slot

24 Battery compartment

25 Stand

26 Screw (ø 2.5 mm)

27 Dowel (ø 6 mm)

Outdoor sensor

28 Control LED

29 Hanging slot

30 Battery compartment

31 Screw (ø 2.5 mm)

32 Dowel (ø 6 mm)

- Technical data

Weather station:

Temperature

measurement range: 0 - +50 °C

+ 3 2 - + 1 2 2 ^ irc F

Note: If the temperature is ≤ 0\ ^ircC (32 ^ircF ), the

LC display shows "LL.L". If the temperature is

≥ 50 °C (122 °F), the LC display shows "HH.H".

Temperature interval: 0.1 °C

Radio signal: DCF

Batteries: 2 x AA 1.

5V---

(included)

Outdoor sensor:

Temperature

measurement range: -20^ircC - +60^ircC

- 4 ^ irc F - + 1 4 0 ^ irc F

Note: If the temperature is ≤ -20\ ^ircC (-4\ ^ircF) ,

the LC display shows "LL.L". If the temperature is ≥ 60\ ^ircC (140 °F), the LC display shows "HH.H".

HF transmission signal: 433 MHz

HF transmission range: max. 30 metres

(in open area)

Batteries: 2 x AA 1. 5V

(included)

Safety

YOU SHOULD STORE ALL SAFETY INFORMATION AND INSTRUC- TIONS IN A SAFE PLACE IN CASE YOU NEED TO REFER TO THEM AGAIN IN THE FUTURE!

Generalsafety information

■ This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

- Do not expose the device to an extremely high electromagnetic field. This may impair the correct functioning of the device.

- Please note that the guarantee does not cover damage caused by incorrect handling, non-compliance with the operating instructions or interference with the device by unauthorised individuals.

Safetyinstructions for batteries

WARNING! DANGER TO

LIFE! Batteries can be swal- lowed, which may represent a danger to life. If a battery has been swallowed, medical help is required immediately.

■ Remove the batteries from the device if they are not going to be used for a prolonged period.

CAUTION! DANGER OF EXPLOSION!

Never recharge batteries which are not rechargeable.

- When inserting the batteries, ensure the correct polarity! This is shown in the battery compartments.

■ Remove spent batteries immediately from the device. There is an increased danger of leaks!

- Keep batteries away from children do not throw the batteries in the fire, short-circuit them or take them apart.

■ Always replace all the batteries at once.

■ Use batteries of the same type only. Otherwise there is a risk of an explosion.

If the batteries have leaked inside your device, you should remove them immediately in order to prevent damage to the device!

- Avoid contact with the skin, eyes and mucous membranes. Any parts of the body coming into contact with battery acid should be rinsed off with copious amounts of water and / or a doctor contacted if necessary!

- Before initial use

Put the batteries first into the outdoor sensor, then into the weather station.

Generalinformation

⚠️ CAUTION! When choosing where to position the weather station, make sure that it is not exposed to direct sunlight, vibrations, dust, heat, cold or moisture. Do not place the weather station or external sensor near to heat sources, e.g. radiators, as this may result in damage to the instruments.

Place the weather station on the accompanying stand 25.
☐ Please ensure that neighbouring devices are not operated at the same frequency of 433 MHz. Such devices may cause interference to the radio connection.
☐ Do not place the devices next to or on metal plates. Otherwise the quality of radio wave transmission may be reduced.

Radio signal (DCF):

The DCF signal (time signal transmitter) is made up of time pulses transmitted from one of the highest precision clocks in the world close to Frankfurt / Main in Germany – it varies by 1 second in 1 million years.

In ideal conditions, your weather station can pick up this signal over a distance of up to approx. 1,500 km around Frankfurt / Main.

• Preparing to use the outdoor sensor

Inserting the batteries:

☐ Remove the battery compartment cover from the back of the outdoor sensor.
☐ Insert two 1. 5V—batteries (AA) (included) into the battery compartment 30.

Note: Make sure you fit the batteries the right way round (polarity). This is shown in the battery compartment (see. fig E).

☐ The outdoor sensor is now ready for use and the control LED 28 illuminates briefly.
☐ Close the battery compartment cover.
☐ If this does not work, carry out a restart, if necessary. To do this, press and keep pressed the Z^Z/REGISTER button 18

• Preparing the weather station for use

Inserting the batteries:

☐ Open the battery compartment 24 on the back of the weather station.
☐ Insert two 1. 5V—batteries (AA) (included) into the battery compartment.
Note: Make sure you fit the batteries the right way round (polarity). This is shown on the battery compartment (see. fig E).

☐ Close the battery compartment cover.

Connecting the weather station with the outdoor sensor and the DCF radio signal:

After the batteries have been inserted, the weather station attempts to establish a connection

with the outdoor sensor. This process can take a few minutes. The 🎨 symbol flashes. Once the device has successfully connected to the external sensor, the 🎨 symbol stops flashing and the temperature is shown in the LC display.

Note: If the weather station does not receive the signal from the outdoor sensor within 3 minutes, the weather station automatically starts with the reception of the radio time signal.

After successful reception of the outdoor sensor signal or after 3 minutes, the weather station starts with the reception of the radio time signal. This process can take up to 5 minutes and is indicated in the LC display by the flashing symbol 11.

After successful reception of the DCF radio signal, the ⚙ symbol is displayed continuously in the LC display.

Note: Do not move the weather station while it is receiving the signal. Otherwise this could interfere with reception. If synchronisation is not possible when the weather station is being first set up, try changing the location (e.g. place the weather station near to a window).

Reception may be considerably reduced by obstructions (e.g. concrete walls) or sources of interference (e.g. other electrical devices).

If the reception of the radio signal continues to be interrupted, you can set the time and date manually (see "Setting the language/time zone/time/date manually").

Mounting the weather station and / or the outdoor sensor on a wall:

Note: You will require an electric drill and a crosshead screwdriver for this step.

⚠️ CAUTION! DANGER TO LIFE, RISK OF INJURY AND MATERIAL DAMAGE! Read

the operating and safety instructions for your drill carefully.

WARNING! DANGER TO LIFE! Take care

that you do not hit electricity, gas or water lines when you drill into the wall. If necessary, check with a pipe and cable detector before drilling.

Weather station

External sensor

☐ Mark the position of the hole ( approx. 6 mm) on the wall.
Drill the hole with an electric drill.
☐ Insert the dowel into the drilled hole.
Using a crosshead screwdriver, screw the screw 26 into the dowel.
☐ Hang the weather station by placing the hanger 23 on the screw.
☐ Mark the position of the hole ( approx. 6 mm) on the wall.
Drill the hole with an electric drill.
☐ Insert the dowel into the drilled hole.
☐ Using a crosshead screwdriver, screw the screw 31 into the dowel.
☐ Hang the external sensor by placing the hanger 29 on the screw.

Note: Ensure that the external sensor does not come into contact with water or direct sunlight. Electronic devices may adversely affect the wireless signal reception.

- Setting the language/time zone/time/date manually

The reception of DCF radio signal where the weather station has been positioned may become degraded or interrupted. If this happens you can set the device manually.

1. Press and hold down the CLOCK button ²² for about 3 seconds.
2. Press the SET / RESET button ²⁰ to switch between the 12- and 24-hour clock display modes.

3. Press the CLOCK button to confirm your settings. The day of the week display 12 flashes.
   Tip: If you press and hold down the SET / RESET button, you accelerate the process and reach the desired value more quickly. This quicker method can also be used for making the following settings. If during a period of 30 seconds no buttons are pressed, the LC display returns automatically to the default display.

4. Press the SET / RESET button to set the desired language (GE = German, FR = French, SP = Spanish, IT = Italian, EN = English).

5. Press the CLOCK button to confirm your settings. The time zone display flashes.

6. Press the SET / RESET button to set the desired time zone for time zone 2 (-12 hours to +12 hours).

Note: Should you be in a country in which the DCF signal can be received but the time is different to your current local time, you can use the time zone setting to have the clock display your current local time. If you find yourself in a country in which, for example, the local time is an hour ahead of Central European Time (CET), you set the time zone to +01. The clock is now still controlled by DCF but shows the time as one hour ahead of CET. If you wish to know what the time is in the USA for example, then simply by setting the time zone value to e.g. - 10 you will obtain the current local time in Los Angeles etc.

1. Press the CLOCK button to confirm your settings. The hour display flashes.

2. Press the SET / RESET button to set the desired value.

3. Press the CLOCK button to confirm your settings.

4. Repeat steps 6 and 7 to set the values for, minutes, seconds 10, year and date 13 (day/month).

Note: The seconds display can only be reset to 00.

1. After this, the LC display returns to the default display.

- Displaying summer time

Summer time is indicated by the DST symbol 14 in the LC display. The weather station

automatically detects from the DCF radio signal whether it is summer time or not.

- Calling up the time zone

The default display shows the time zone according to the information provided by the DCF signal.

☐ Press the CLOCK button 22 The time zone 16 appears in the LC display.

☐ Press the CLOCK button again to return to the default display.

- Setting the alarm time

You can set two different alarm times.

1. Press and hold down the ALARM button 21 for about 3 seconds. Note: If an alarm time has been set before, then that previously set alarm time appears in the LC display. If not, then the display shows 0:00 or AM 12:00.

2. The hour display flashes. Press the SET / RESET button 20 to set the desired value.

3. Press the ALARM button to confirm your settings. The minute display flashes.

4. Press the SET / RESET button to set the desired value.

5. Press the ALARM button to confirm your settings.

6. Repeat steps 2 to 5 to set the time for Alarm 2.

- Calling up the alarm times

☐ Press ALARM button 21 once or twice to call up the set time for Alarm 1 or Alarm 2 respectively.

☐ Press the ALARM button again to return to the default display.

- Switching the alarm on / off

☐ Press the SET / RESET button 20 once to activate Alarm 1. Press the SET / RESET button twice to activate Alarm 2. Press the SET / RESET button three times to activate Alarm 1 and Alarm 2.

Note: The symbol 🔊 or 🔒 appears in the LC display.

☐ The alarm signal sounds as soon as the set alarm time is reached. The alarm signal ceases automatically after a period of 2 minutes.

☐ Press the ALARM button 21 to switch off the alarm signal before it switches off automatically.

Note: The alarm signal sounds every day at the set time.

☐ Press the SET / RESET button three times to deactivate Alarm 1. Press the SET / RESET button twice to deactivate Alarm 2. Press the SET / RESET button once to deactivate Alarm 1 and Alarm 2.

• Using the snooze button

☐ Press the Z^Z/REGISTER button 18 while the alarm signal is sounding to activate the snooze function.

☐ The alarm signal is silenced and the displays 🙏 or 🔒 and Z Z flash.
☐ The alarm signal sounds again after approx. 5 minutes.
☐ Press the SELECT button 19 to deactivate the snooze function.

• Displaying temperature

The LC display shows the indoor temperature 6 and the outdoor temperature 2.

☐ Press and hold down the SELECT button 19 for approx. 3 seconds. The °C display flashes.
☐ Press the SET / RESET button 20 to switch between the °C (Celsius) and °F (Fahrenheit) temperature scales.
☐ Press the SELECT button to confirm your settings.

- Calling up the minimum / maximum values

The weather station stores the maximum and minimum values of the outdoor sensor and of the weather station itself.

☐ Press the SELECT button 19 to display the maximum values of the indoor 4 and outdoor temperature 17.
☐ Press the SELECT button again to display the minimum values of the indoor and outdoor temperature.

☐ Press the SET / RESET button 20 while the maximum and minimum values, are being displayed to reset the values.
☐ Press the SELECT button, to return to the default display.

- Displaying temperature trends

After successfully connecting with the outdoor sensor, the weather station can display the temperature trend (outdoor) 1 and the temperature trend (indoor) 5.

You may see the following displays:

→ = The temperature is rising.
→ = The temperature is constant.
= The temperature is falling.

- Battery state display

The 3 and 7 symbols appear in the weather station's LC display if the batteries in the outdoor sensor or the weather station are weak.

- Replacing the batteries

☐ Open the battery compartment 24 or 30.
☐ Remove the exhausted batteries.
☐ Insert two new 1.5 V-batteries (AA) into the battery compartments.
Note: Make sure you fit the batteries the right way round (polarity). This is shown in the battery compartments (see Figs. C + E).
☐ Close the battery compartments.

Troubleshooting

Note: This appliance has delicate electronic components. This means that if it is placed near an object that transmits radio signals, it could cause interference.

☐ If the display indicates a problem, move such objects away from it or remove the batteries for a short while and then replace them.

Obstacles such as concrete walls can also cause that the reception is disturbed. In this case, change the location (eg near a window). Please take note that the external sensor should always be set up within max. 30 meters (open space) from the base station. The specified range is the free-field range and means that no obstacle should be between the remote sensor and the base station. A “visual contact” between remote sensor and base station often improves the transmission.

Cold (outdoor temperatures below 0\ °C ) can reduce the battery power of the outdoor sensor and thereby negatively impair the radio transmission.

Another factor that may cause harmful interference, are dead or weak batteries in the outdoor sensor. Replace them by new ones.

If your weather station is not working correctly, please remove the batteries for a short while and then replace them.

- Cleaning and maintenance

☐ The device should only be cleaned on the outside with a soft dry cloth.
☐ Under no circumstances should you spray the outdoor sensor, e.g. with a garden hose. The outdoor sensor is only protected against rain from above.

- Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

Faulty or used batteries must be recycled in accordance with Directive 2006/66/EC. Please return the batteries and / or the device to the available collection points.

Environmental damage through incorrect disposal of the batteries!

Batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead. That is why you should dispose of used batteries at a local collection point.

● Declaration of conformity

We, OWIM GmbH & Co. KG, Stiftsbergstraße 1, D-74167 Neckarsulm, hereby declare under our sole responsibility that the product: Temperature station, model no.: Z31743A / Z31743B, Version: 09/2013, to which this declaration refers, complies with the standards / normative documents of 1999/5/EC.

The complete declaration of conformity can be viewed at: www.owim.com

EMC C€

Bestimmungsgemäße

Model no.: Z31743A/Z31743B

Version: 09/2013