NK36M1030IS - Range hood SAMSUNG - Free user manual and instructions

Product Type	Built-in Range Hood (under cabinet)
Brand	Samsung
Model	NK36M1030IS
Width	89.8 cm
Depth	76 cm
Height (overall)	2.1 cm (trim) + variable duct cover
Net Weight	9 kg
Gross Weight	10.5 kg
Power Supply	220-240 V, 50/60 Hz
Lamp Type	LED (3 W, E14 socket)
Speed Levels	3 (low, medium, high) + boost (if applicable)
Extraction Mode	Ducted (external) or recirculation (with charcoal filter)
Grease Filter	Washable metal, monthly cleaning
Charcoal Filter	Optional, replace every 4 months
Controls	Push buttons: Light ON/OFF, Power ON/OFF, Speed 2, Speed 3
Minimum Installation Height	50 cm (electric hob) / 65 cm (gas hob)
Airflow (max)	Not specified in manual (typical ~650 m³/h)
Noise Level	Not specified (typical 55-65 dB)
Energy Class	Not specified
Safety Certifications	EN/IEC 60335-1, EN/IEC 60335-2-31, EN/IEC 62233
Warranty	Refer to manufacturer
Country of Origin	Not specified

Frequently Asked Questions - NK36M1030IS SAMSUNG

What is the minimum installation height for the NK36M1030IS range hood?

The minimum distance between the cooking surface and the lowest part of the hood is 50 cm for electric cookers and 65 cm for gas or mixed cookers. Always follow the gas hob manufacturer's instructions if they specify a greater distance.

Can I use the hood in recirculation mode?

Yes, the hood can be used in recirculation mode by installing optional charcoal filters. These filters absorb odors and must be replaced at least every 4 months.

How do I clean the grease filter?

Clean the grease filter once a month by hand with non-aggressive detergents or in a dishwasher at a low temperature and short cycle. Discoloration may occur but does not affect filtering capacity.

How do I replace the lamp?

First, disconnect the hood from the power supply. Ensure the lamp is cool. Remove the suction grill to access the lamp area. Replace with a 3W E14 LED lamp (35x102 mm). Reinstall the grill.

Where can I buy replacement charcoal filters?

Replacement charcoal filters can be purchased from the Samsung Service Website or an authorized service center. Refer to the last page of the user manual for contact details.

What should I do if the hood is not working after installation?

Check that the power cable is correctly connected and the plug is in a working socket. Ensure the lamps are fitted properly. If the problem persists, contact Samsung technical service.

Is it safe to flambé under the range hood?

No, never flambé under the range hood. Open flames can damage filters and cause a fire risk. Always avoid using exposed flames near the hood.

Can I install the hood myself?

Yes, but follow the installation instructions carefully. Use the supplied screws and ensure the electrical connection is done by a qualified person if needed. Verify local regulations for fume discharge.

How often should I replace the charcoal filter?

Replace the charcoal filter at least every 4 months, or more frequently depending on cooking habits and grease filter cleaning regularity. It cannot be washed or regenerated.

What type of duct is recommended for extraction mode?

Use a duct with a diameter equal to the connection ring (not specified but typically 120-150 mm). Keep the duct as short and straight as possible, with minimum elbows (max 90°) to reduce noise and maintain performance.

USER MANUAL NK36M1030IS SAMSUNG

EN Instruction on mounting and use

Line drawings of four different mechanical tools: a drill, tape measure, screwdriver, and blade (no text or symbols)

	NK36M1030IS	NK24M1030ISNK24M1030IB
A	89.8 cm	59.8 cm
B	76 cm	46 cm
C	2.1 cm
D	0-15.5 cm
E	28 cm
F	18 cm
G	4 cm
H	3.1 cm
I	12 cm

NK36M1030IS (net weight - gross weight) : 9 Kg - 10,5 Kg

NK24M1030IS (net weight - gross weight) : 7,2 Kg - 8,3 Kg

NK24M1030IB (net weight - gross weight) : 7,2 Kg - 8,3 Kg

Technical line drawing of a mechanical component with no visible text or symbols

Line drawing of a 3D furniture or architectural structure with no text, numbers, or symbols

Illustration of two experimental setups with a bulb on a table, one with a tool and another with a bulb inserted into it (no text or symbols)

EN - Instruction on mounting and use

Symbols used in this manual

WARNING

Hazards or unsafe practices that may result in severe personal injury or death.

CAUTION

Hazards or unsafe practices that may result in electric shock, personal injury, or property damage.

NOTE

Useful tips and instructions

These warning icons and symbols are here to prevent injury to you and others. Please follow them explicitly. After reading this section, keep it in a safe place for future reference.

Closely follow the instructions set out in this manual. All responsibility, for any eventual inconveniences, damages or fires caused by not complying with the instructions in this manual, is declined. This appliance is intended to be used in household and similar application such as: - staff kitchen areas in shop, offices and other working environments; - farm houses; - by clients in hotels, motels and other residential type environments; - bed and breakfast type environments.

The hood can look different to that illustrated in the drawings in this booklet. The instructions for use, maintenance and installation, however, remain the same.

• It is important to conserve this booklet for consultation at any moment. In the case of sale, cession or move, make sure it is together with the product.
• Read the instructions carefully: there is important information about installation, use and safety.
• Do not carry out electrical or mechanical variations on the product or on the discharge conduits.
• Before proceeding with the installation of the appliance verify that there are no damaged all components. Otherwise contact your dealer and do not proceed with the installation.

Caution

• Before any cleaning or maintenance operation, disconnect hood from the mains by removing the plug or disconnecting the mains electrical supply.
• Always wear work gloves for all installation and maintenance operations.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not be allowed to tamper with the controls or play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• The premises where the appliance is installed must be sufficiently ventilated, when the kitchen hood is used together with other gas combustion devices or other fuels.
• The hood must be regularly cleaned on both the inside and outside (AT LEAST ONCE A MONTH).

• This must be completed in accordance with the maintenance instructions provided. Failure to follow the instructions provided regarding the cleaning of the hood and filters will lead to the risk of fires.

• Do not flambé under the range hood.

• For lamp replacement use only lamp type indicated in the Maintenance/Replacing lamps section of this manual.
  The use of exposed flames is detrimental to the filters and may cause a fire risk, and must therefore be avoided in all circumstances.
  Any frying must be done with care in order to make sure that the oil does not overheat and ignite. CAUTION: Accessible parts of the hood may become hot when used with cooking appliances.
• Do not connect the appliance to the mains until the installation is fully complete.
• With regards to the technical and safety measures to be adopted for fume discharging it is important to closely follow the regulations provided by the local authorities.
• The air must not be discharged into a flue that is used for exhausting fumes from appliance burning gas or other fuels.
• Do not use or leave the hood without the lamp correctly mounted due to the possible risk of electric shocks.
• Never use the hood without effectively mounted grids.
• The hood must NEVER be used as a support surface unless specifically indicated.
• Use only the fixing screws supplied with the product for installation or, if not supplied, purchase the correct screws type.
• Use the correct length for the screws which are identified in the Installation Guide.
  • In case of doubt, consult an authorized service assistance center or similar qualified person.

▲ WARNING!

• Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.
• Do not use with a programmer, timer, separate remote control system or any other device that switches on automatically.

- This appliance is marked according to the European directive 2012/19/EC on Waste Electrical and Electronic Equipment (WEEE).

- By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

• The symbol ____ on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal.
• For further detailed information regarding the process, collection and recycling of this product, please contact the appropriate department of your local authorities or the local department for household waste or the shop where you purchased this product.

Appliance designed, tested and manufactured according to:

• Safety: EN/IEC 60335-1; EN/IEC 60335-2-31, EN/IEC 62233.
• Performance: EN/IEC 61591; ISO 5167-1; ISO 5167-3; ISO 5168; EN/IEC 60704-1; EN/IEC 60704-2-13; EN/IEC 60704-3; ISO 3741; EN 50564; IEC 62301.
- EMC: EN 55014-1; CISPR 14-1; EN 55014-2; CISPR 14-2; EN/IEC 61000-3-2; EN/IEC 61000-3-3. Suggestions for a correct use in order to reduce the environmental impact: Switch ON the hood at minimum speed when you start cooking and kept it running for few minutes after cooking is finished. Increase the speed only in case of large amount of smoke and vapor and use boost speed(s) only in extreme situations. Replace the charcoal filter(s) when necessary to maintain a good odor reduction efficiency. Clean the grease filter(s) when necessary to maintain a good grease filter efficiency. Use the maximum diameter of the ducting system indicated in this manual to optimize efficiency and minimize noise.

Use

The hood is conceived for the suction of cooking fumes and steam and is destined only for domestic use.

The hood is designed to be used either for exhausting or filter version.

Extraction version

In this case the fumes are conveyed outside of the building by means of a special pipe connected with the connection ring located on top of the hood.

CAUTION!

The exhausting pipe is not supplied and must be purchased apart.

Diameter of the exhausting pipe must be equal to that of the connection ring.

CAUTION!

If the hood is supplied with active charcoal filter, then it must be removed.

Connect the hood and discharge holes on the walls with a diameter equivalent to the air outlet (connection flange).

Using the tubes and discharge holes on walls with smaller dimensions will cause a diminution of the suction performance and a drastic increase in noise.

Any responsibility in the matter is therefore declined.

! Use a duct of the minimum indispensable length.

! Use a duct with as few elbows as possible (maximum elbow angle: 90°).

! Avoid drastic changes in the duct cross-section.

Filtration version

The aspirated air will be degreased and deodorised before being fed back into the room.

In order to use the hood in this version, you have to install a system of additional filtering based on activated charcoal.

Installation

The minimum distance between the supporting surface for the cooking equipment on the hob and the lowest part of the range hood must be not less than 50cm from electric cookers and 65cm from gas or mixed cookers.

If the instructions for installation for the gas hob specify a greater distance, this must be adhered to.

Electrical connection

The mains power supply must correspond to the rating indicated on the plate situated inside the hood. If provided with a plug connect the hood to a socket in compliance with current regulations and positioned in an accessible area, after installation. If it not fitted with a plug (direct mains connection) or if the plug is not located in an accessible area, after installation, apply a double pole switch in accordance with standards which assures the complete disconnection of the mains under conditions relating to over-current category III, in accordance with installation instructions.

▲ WARNING!

Before re-connecting the hood circuit to the mains supply and checking the efficient function, always check that the mains cable is correctly assembled.

The hood is provided with a special power cable; if the cable is damaged, request a new one from Technical Service.

Mounting

Before beginning installation:

- Check that the product purchased is of a suitable size for the chosen installation area.

- Remove the charcoal (*) filter/s if supplied (see also relative paragraph). This/these is/are to be mounted only if you want to use the hood in the filtering version.

- Check (for transport reasons) that there is no other supplied material inside the hood (e.g. packets with screws (*), guarantees (*), etc.), eventually removing them and keeping them.

This hood is designed for fitting in a cabinet or on some other support.

Maintenance

Cleaning

Clean using ONLY a cloth dampened with neutral liquid detergent. DO NOT CLEAN WITH TOOLS OR INSTRUMENTS. Do not use abrasive products. DO NOT USE ALCOHOL!

Always wear work gloves for all maintenance operations.

Grease filter

Fig. 8-13

Traps cooking grease particles.

The grease filter must be cleaned once a month using non aggressive detergents, either by hand or in the dishwasher, which must be set to a low temperature and a short cycle. When washed in a dishwasher, the grease filter may discolor slightly, but this does not affect its filtering capacity.

To remove the grease filter, pull the spring release handle.

Charcoal filter (Optional)

Fig. 12

It absorbs unpleasant odors caused by cooking.

The saturation of the charcoal filter occurs after more or less prolonged use, depending on the type of cooking and the regularity of cleaning of the grease filter. In any case it is necessary to replace the cartridge at least every four months.

The charcoal filter may NOT be washed or regenerated.

Remove the grease filters

Apply one charcoal filter each side and hook in onto the hood.

Refit the grease filter.

Buying charcoal filters

The Charcoal filter can be bought at Samsung Service Website and Service Center.

Please refer to the last page of manual.

Replacing lamps

Disconnect the appliance from the electricity.

Warning! Prior to touching the light bulbs ensure they are cooled down.

Extract the drawer completely.

Remove the suction gril to access the lamp area.

Remove the damaged light and replace it with a new one (see the table below):

Lamp	Power (W)		Socket
	3		E14
Voltage (V) Dimension (mm)
220-240		35x102 (Diameter x Length)
ILCOS D Code(according IEC 61231)
DRBB/C-3-220-240-E14-35/102

Put the grill back.

If the lights do not work, make sure that the lamps are fitted properly into their housings before you call for technical assistance.

Operation

The hood is fitted with a control panel with aspiration speed selection control and a light switch to control cooking area lights.

a. Light ON/OFF

Press the Light button and the lamps will turn on.

Press the Light button again and the lamps will turn off.

b. Motor ON/OFF

Press the POWER button and the hood will be activated at default speed.

Press again and the hood will be turned off.

c. Medium Speed

Press the button "2" and the hood will be activated at medium speed

d. High Speed

Press the button "3" and hood will be activated at high speed.

- Waste Electrical and Electronic Equipment (WEEE).

Moy filtrarini chiqaring.

Har bir tomonga bittadan ko'mir filtrini qo'ying va uni qopqoqqa ilib qo'ying

Moy filtrini qayta o'rnating.

Ko'mir filtrarini harid qilish

Ko'mir filtrari Samsung servis veb-sahifasi va xizmat ko'rsatish markazidan harid qilinishi mumkin. Qo'llanmaning so'nggi sahifasiga qarang.

Lampalarni almashtirish

Jihozni elektr tarmog'idan uzing.

Ogohlantirish! Lampochkaga teginishdan avval uning soviganligini tekshirib ko'ring.

Tortmani to'liq chiqaring.

Lampochka bo'lmasini ochish uchun so'ruvchi panjarani chiqarib oling.

B1. Lampani yoqish/o'chirish