BDPS400 - Peinture en spray BLACK & DECKER - Free user manual and instructions
Find the device manual for free BDPS400 BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Airless paint sprayer (HVLP) |
| Brand | Black & Decker |
| Model | BDPS400 |
| Power supply | Mains 220-240 V, 50 Hz |
| Power | 400 W |
| Tank capacity | 500 ml |
| Paint flow rate | 500 ml/min (adjustable) |
| Nozzle type | Interchangeable nozzle 2.0 mm |
| Spray pattern adjustment | Horizontal, vertical, round |
| Compatible viscosity | Up to 50 DIN (dilutable) |
| Use | Paints, varnishes, stains, primers |
| Weight | 1.2 kg |
| Dimensions (L x W x H) | 25 x 20 x 15 cm |
| Cable length | 3 m |
| Noise level | 70 dB(A) |
| Vibration | < 2.5 m/s² |
| Maintenance | Clean after each use with suitable solvent |
| Safety | Automatic shutdown in case of overheating |
| Spare parts | Nozzles, seals, tank available |
| Warranty | 2 years |
Frequently Asked Questions - BDPS400 BLACK & DECKER
What types of paint can I use with the BDPS400?
You can use water-based or solvent-based paints, varnishes, stains, and primers. Make sure the viscosity does not exceed 50 DIN using a viscosity cup.
How to clean the sprayer after use?
Empty the remaining paint, then rinse with a suitable solvent (water for water-based paint, mineral spirits for solvent-based paint). Run the sprayer with the solvent for a few seconds to clean the nozzle.
What to do if spraying is uneven?
Check that the nozzle is not clogged. Clean it with a fine brush. Make sure the paint is properly thinned and the tank is sufficiently filled. Adjust the flow and spray pattern.
Can I use the sprayer without thinning the paint?
No, the paint must be thinned to the recommended viscosity (usually 40-50 DIN). Paint that is too thick will clog the nozzle and produce an uneven spray.
How to change the nozzle of the BDPS400?
Unplug the device. Unscrew the nozzle nut, remove the old nozzle and insert the new one. Tighten the nut firmly. Ensure the nozzle is suitable for the viscosity of your paint.
What to do if the sprayer does not spray?
Check the power supply. Ensure the tank contains paint and the nozzle is not clogged. Test with solvent to check operation. If nothing comes out, the motor or pump may be defective.
How to adjust the spray pattern?
Turn the adjustment knob on the sprayer. Possible positions: round spray (small area), horizontal spray (for large vertical surfaces), and vertical spray (for horizontal surfaces).
Is the sprayer supplied with additional nozzles?
Yes, the BDPS400 is usually supplied with at least one spare nozzle. Consult the manual for exact references of compatible nozzles.
What is the lifespan of the device?
With regular maintenance (cleaning after each use, storing away from moisture), the BDPS400 can last several years. Wear parts (nozzles, seals) are replaceable.
Can I use the BDPS400 to paint furniture?
Yes, the sprayer is suitable for furniture, walls, fences, etc. For small areas, use a round spray. For large areas, choose a horizontal spray. Apply in thin coats to avoid drips.
User questions about BDPS400 BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Peinture en spray in PDF format for free! Find your manual BDPS400 - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BDPS400 by BLACK & DECKER.