ELECTRA-S-24F - Switch Ernitec - Free user manual and instructions
Find the device manual for free ELECTRA-S-24F Ernitec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Brand | Ernitec |
| Model | ELECTRA-S-24F |
| Number of Ports | 24 |
| Port Type | 10/100/1000 Mbps Ethernet |
| Uplink Ports | 4 SFP (Fiber) Slots |
| PoE Support | Yes, IEEE 802.3at (PoE+) up to 30W per port |
| PoE Budget | 370W |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.66 Mpps |
| MAC Address Table | 8K entries |
| Management | Web-based, SNMP, CLI (Layer 2 Managed) |
| VLAN Support | Yes, up to 4K VLANs |
| Dimensions (W x D x H) | 440 x 200 x 44 mm (1U Rack Mount) |
| Weight | 2.5 kg |
| Power Supply | AC 100-240V, 50/60Hz, Internal |
| Power Consumption | Max 50W (without PoE) |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Cooling | 2 built-in fans |
| Safety Certifications | CE, FCC, RoHS |
| Warranty | 2 years |
| Included Accessories | Power cord, rack mount kit, user manual CD |
Frequently Asked Questions - ELECTRA-S-24F Ernitec
What is the default IP address to access the web interface?
The default IP address is 192.168.1.10 with username admin and password admin.
Does this switch support Power over Ethernet (PoE)?
Yes, the ELECTRA-S-24F supports IEEE 802.3at PoE+ on all 24 ports, with a total PoE budget of 370W.
How do I reset the switch to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until the LEDs flash simultaneously.
What types of SFP modules are compatible?
The switch accepts standard SFP modules for 1000BASE-SX, 1000BASE-LX, and 1000BASE-T. For best performance, use Ernitec certified modules.
Can I configure VLANs on this switch?
Yes, it is a Layer 2 managed switch supporting up to 4K VLANs with 802.1Q tagging.
What is the maximum power consumption without PoE?
The switch consumes a maximum of 50W when no PoE devices are connected.
Is the switch rack-mountable?
Yes, it is designed for 19-inch rack mounting with the included rack mount kit. The dimensions are 440 x 200 x 44 mm (1U).
How do I update the firmware?
Access the web interface, go to System > Firmware Upgrade, upload the downloaded firmware file, and wait for the switch to reboot.
What should I do if a port is not working?
Check the cable connection, ensure the port is enabled in configuration, and verify that the connected device supports the same speed/duplex. Try a different port or cable.
Does the switch support QoS?
Yes, it supports Quality of Service (QoS) with 8 priority queues and strict priority or Weighted Round Robin scheduling.
User questions about ELECTRA-S-24F Ernitec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual ELECTRA-S-24F - Ernitec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ELECTRA-S-24F by Ernitec.