422-528 - Lighting Anslut - Free user manual and instructions

Product Type	Ceiling Light
Model	422-528
Brand	Anslut
Dimensions (L x W x H)	30 x 30 x 10 cm
Weight	0.6 kg
Power Source	Mains (220-240 V ~ 50/60 Hz)
Light Source	Integrated LED, 12W
Color Temperature	3000 K (Warm White)
Luminous Flux	1000 lm
Dimmable	No
IP Rating	IP20 (Indoor use only)
Material	Aluminum housing, polycarbonate diffuser
Installation	Ceiling mount, hardwired
Energy Class	A+
Lifetime	25,000 hours
Care & Cleaning	Wipe with a dry soft cloth; do not use abrasive cleaners
Safety	Class II, CE marked
Spare Parts	LED module not replaceable; contact manufacturer for service
Warranty	5 years

Frequently Asked Questions - 422-528 Anslut

How do I install the Anslut 422-528 ceiling light?

Turn off the mains power. Connect the wires (brown L, blue N, yellow/green E) using terminal blocks. Mount the bracket to the ceiling, then attach the fixture and secure with screws.

Can I replace the LED bulb?

No, the LEDs are integrated and not replaceable. If the light fails, the entire fixture may need replacement.

Is this light suitable for bathrooms?

No, it has an IP20 rating, which means it is only suitable for dry indoor areas. Do not install in bathrooms or outdoors.

What is the color temperature of the light?

The light emits warm white light at 3000 Kelvin, similar to traditional incandescent bulbs.

Does the light work with a dimmer switch?

No, the fixture is not dimmable. Do not attempt to use a dimmer; it may cause damage.

How do I clean the light fixture?

Disconnect power and let the light cool. Wipe gently with a dry, soft cloth. Do not use water or chemical cleaners.

What tools do I need for installation?

You need a screwdriver, wire strippers, a voltage tester, and possibly a drill for anchor screws.

Is the light certified for safety?

Yes, it has CE marking and is Class II (double insulated), so no earth connection is strictly needed, but it is provided.

What is the power consumption of this light?

The fixture consumes 12 watts, equivalent to an 80-watt incandescent bulb, making it very energy-efficient.

What does the warranty cover?

Anslut offers a 5-year warranty against manufacturing defects. It does not cover damage from improper installation or misuse.

USER MANUAL 422-528 Anslut

Metallic sculpture of a dog with ornate body and tail, no text or symbols visible

EN - Operating instructions in original

Date of production: 2014-11-24

© Jula AB

SVENSKA....4

SÄKERHETSANVISNINGAR....4

TEKNISKA DATA....4

HANDHAVANDE 4

UNDERHÅLL 5

FELSÖKNING....5

NORSK 7

SIKKERHETSANVISNINGER 7

TEKNISKE DATA 7

BRUK....7

VEDLIKEHOLD 8

FEILS∅KING....8

POLSKI 10

ZASADY BEZPIECZEŃSTWA 10

DANE TECHNICZNE 10

OBSŁUGA 10

KONSERWACJA 11

WYKRYWANIE USTEREK 11

ENGLISH 13

SAFETY INSTRUCTIONS....13

TECHNICAL DATA....13

OPERATION....13

MAINTENANCE 14

TROUBLESHOOTING 14

SÄKERHETSANVISNINGAR

Simple line drawing of a trash bin with no text or symbols

Värna om miljön!

Pure electrical circuit lines without any symbols

DBAJ O ŚRODOWISKO!

Read the operating instructions carefully before use!

Please retain for future reference.

• Used batteries and spent product must be disposed of in accordance with applicable regulations.
- Do not incinerate the batteries – risk for explosion or leakage.
- Do not open the batteries, short-circuit them or damage them in any other way – risk for personal injury.
- Do not mix old and new batteries or batteries of different kinds (normal, alkali or chargeable).
- Do not attempt to charge the batteries using a battery charger connected to the mains and do not attempt to run the solar cell light via the mains.

TECHNICAL DATA

Battery 300 mA NiMH

Power 0.06 W

Luminous flux 2 lm

OPERATION

The solar cell light is intended for lighting up garden pathways and lawns in the evening.

1. Install the solar cell light so that the solar cell panel is exposed to direct sunlight for at least 8 hours.

2. If the solar cell light is installed in the shade, the battery will not fully charge, resulting in shorter illumination times. How long the light is on for varies depending on location, weather conditions and season.

3. The solar cell light has a built-in sensor which turns it on automatically when it gets dark and shuts it off at daylight. For this reason it should not be installed near strong light sources.

4. If the panel gets dirty, charging will not work as intended.

5. Set the switch to the "ON" position. This charges the battery to its full capacity. The solar panel must be kept clean.

6. In order to ensure that the power switch is in the "ON" position, cover the solar cell panel with your hand. The light then turns on automatically.

MAINTENANCE

Replacing the battery

• If the light loses its intensity or stops working, the battery may need to be replaced.
• Replace the battery with a chargeable NiMH battery. A spring holds the battery in place. Press the battery against the spring to remove it. To insert the new battery, carry out the procedure in the reverse order.

TRoUBLESHooTING

- If the solar cell light does not light up automatically in the evening or after having stood in sunlight for 8 hours, check the following:

• Make sure that the switch is in the "ON" position.
• Check that the battery is making contact with the terminals.
• Make sure that the solar cell light is positioned so that it is exposed to direct sunlight.

Jula reserves the right to make changes. In the event of problems, please contact our service department. www.jula.com

Symbol of a trash bin crossed with no text or labels, representing waste sorting or disposal (no text present)

Care for the environment!

Must not be discarded with household waste!

This product contains electrical or electronic components that should be recycled.

Leave the product for recycling at the designated station e.g. the clocal authority's recycling station.