MG 740 - Coffee grinder HYUNDAI - Free user manual and instructions

Product Type	Meat Grinder with Grating Attachment
Brand	Hyundai
Model	MG 740
Dimensions (H x W x D)	299 x 151 x 311 mm
Weight (drive unit)	Approx. 2.79 kg
Power Supply	220-240 V, 50 Hz (see type label for wattage)
Protection Class	II
Max Continuous Operation	5 minutes
Cool-down Period	At least 30 minutes
Noise Level	90 dB(A)
Functions	Meat mincing, sausage making, grating/slicing vegetables and cheese
Mincing Discs Included	Fine, medium, and coarse
Grating Attachments Included	Coarse grater, fine grater, cheese grater
Additional Accessories	Spiral feeder, cutting blade, pusher, hopper, smoked food adapter, separator
Safety Features	Thermal overload protection, reverse function, release button
Housing Material	Plastic (motor unit), stainless steel blades and discs
Cleaning	Wipe motor unit with damp cloth; hand wash accessories; do not immerse motor unit
Dishwasher Safe	No (metal parts only hand wash)
Intended Use	Household and similar (not commercial)
Warranty and Service	See www.hyundai-electronics.cz/servis-eu

Frequently Asked Questions - MG 740 HYUNDAI

How do I assemble the meat grinder attachment?

First, ensure the appliance is unplugged. Insert the spiral feeder into the mincer body, then attach the cutting blade with the cutting edges facing forward. Choose a mincing disc (fine, medium, or coarse) and secure it with the nut. Finally, mount the assembled mincer onto the motor unit by pushing the release button and twisting until it locks. Refer to Figure 1 in the manual.

Can I grind frozen meat?

No, do not process frozen meat. Cut the meat into cubes about 3x3x3 cm and ensure it is thawed. Frozen meat can damage the blades and overload the motor.

What should I do if the grinder jams?

If the appliance becomes blocked, immediately switch it off. Then rotate and hold the speed knob to the 'R' position for reverse run to release the food. After clearing, allow the motor to cool down before resuming.

How do I clean the metal parts?

Wash all metal accessories (blades, discs, spiral feeder) immediately after use in hot water with mild detergent. Do not use a dishwasher as it may damage them. Dry thoroughly and apply a thin layer of cooking oil to prevent rust.

Can I use the grater attachment for hard cheese?

Yes, the cheese grater attachment is designed for hard cheeses. However, work quickly as the food heats up and may become soft and lumpy. It can also be used for breadcrumbs.

Why does the motor stop during use?

The appliance has a thermal safety fuse that cuts off power if the motor overheats. This can happen if you exceed the maximum operation time (5 minutes) or if the mincer is overloaded. Unplug the appliance and let it cool for at least 30 minutes before using again.

How do I make sausages with this grinder?

After mincing the meat, attach the smoked food adapter. Soak sausage casings in warm water for 10 minutes, then slide them onto the adapter. Use the pusher to feed the minced meat into the hopper. Hold the casing as it fills, and tie off the ends. It is easier with two people.

Is the appliance dishwasher safe?

No, do not put any parts in the dishwasher. The motor unit must only be wiped with a damp cloth. Metal accessories should be hand washed to preserve their sharpness and finish.

What is the purpose of the release button?

The release button (A2) is used to safely attach or remove accessories from the motor unit. Press it while twisting the accessory to lock or unlock it. Always ensure the appliance is off and unplugged before doing this.

Can I grind bones or tough sinews?

No, the grinder is only for boneless, skinless meat. Remove all bones, tendons, and tough sinews before mincing to avoid damaging the blades and motor.

USER MANUAL MG 740 HYUNDAI

White manual meat maker with a side panel and control knob, labeled 'HYUNDAI' (no additional text or symbols visible)

GENUINE PRODUCT OF HYUNDAI CORPORATION

NÁVOD K POUŽITÍ / NÁVOD NA POUŽITIE INSTRUKCJA OBSŁUGI / INSTRUCTION MANUAL HASZNÁLATÍ ÚTMUTATÓ / BEDIENUNGSANLEITUNG

Mlýnek na maso / Mlynček na mäso / Maszynka do mielenia mięsa / Meat grinder / Húsdaráló / Fleischwol

graph TD
    A["1: Raw Material Inspection"] --> B["B3"]
    B --> C["B5"]
    C --> D["B4"]
    D --> E["B2"]
    E --> F["B1"]
    F --> G["A2"]
    G --> H["A1"]
    H --> I["A3"]
    I --> J["R"]
    J --> K["0"]
    K --> L["1"]
    L --> M["A4"]
    M --> N["9"]
    N --> O["C0"]
    O --> P["C1"]
    P --> Q["C2"]
    Q --> R["C3"]
    R --> S["C4"]
    S --> T["8"]
    T --> U["7"]
    U --> V["B10"]

V. SKLADOVÁNÍ

V. SKLADOVANIE

VI. PRAWODAWSTWO I EKOLOGIA

OSTRZEŻENIE: ABY UNIKNAĆ NIEBEZPIECZEŃSTWA POŻARU LUB PORAŻENIA PRADEM ELEKTRYCZNYM, NIE WOLNO WYSTAWIAĆ SPRZĘTU NA DZIAŁANIE DESZCZU BADŹ WILGOCI. URZĄDZENIE ODBIORCZE ZAWSZE WYŁĄCZYĆ Z GNIAZDKA, KIEDY NIE JEST UŻYWANE LUB PRZED

NAPRAWA. W URZĄDZENIU NIE MA ŻADNYCH CZĘŚCI, KTÓRE BY MÓGŁ ODBIORCASAMODZIELNIE NAPRAWIAĆ.NAPRAWĘ SPRZĘTU NALEŻY ZLECIĆ ODPOWIEDNIO PRZYGOTOWANEMU SERWISU AUTORYZACYJNEMU. URZĄDZENIE ZNAJDUJE SIĘ POD NIEBEZPIECZNYM NAPIĘCIEM.

Dear customer, thank you for purchasing our product. Please read the operating instructions carefully before putting the appliance into operation and keep these instructions including the receipt and, if possible, the box with the internal packing.

I. SAFETY WARNING

• Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
• Check whether the data on the type label correspond with the voltage in your socket. The power supply plug has to be connected to a socket of electrical installation that conforms to respective standards.
• Never use the appliance if the power cord or power plug are damaged, if it is not functioning correctly or if it has fallen on the floor and been damaged or if it has fallen into water. In such cases take the appliance to a professional service centre to verify its safety and correct function.
• This appliance must not be used by children. Keep the device and its supply cord out of reach of children. The device may be used by persons with reduced physical or mental abilities or lack of experience and knowledge only if they are under supervision or they have been instructed about using the appliance safely and understand the potential dangers. Children must not play with the appliance.
• Be careful when pouring hot liquid into the food processing device or the mixer because it may spurt out of the appliance because of sudden boil.
• If the power cord of this appliance is damaged, the cord must be replaced by the manufacturer, their service technician or by a similarly qualified person, this will prevent the creation of a dangerous situation.
• Always unplug the appliance from power supply if you leave it unattended.
• Handle the accessories very carefully, they are very sharp!
• When the appliance is in operation, prevent pets, plants or insects to get in contact with it.
• Always disconnect the appliance from the power socket if you will be leaving it without supervision.
• CAUTION: Do not use the appliance with a program, time switch or any other part that turns the appliance on automatically as there is a risk of fire if the appliance is not covered or placed properly.
• After finishing work and before cleaning, always switch off the appliance and disconnect it from power supply by taking the power cord connector out of the electric socket.
• Do not leave the appliance in operation without supervision and supervise it for the entire time that food is being prepared!

• The product is intended for home use and similar (in shops, offices and similar workplaces, in hotels, motels and other residential environments, in facilities providing accommodation with breakfast). It is not intended for commercial use!

• Never submerge the appliance under water and do not wash under running water!

• The appliance must not be used in damp or wet environment and in any environment with the danger of fire or explosion (spaces where chemicals, fuels, oils, gases, paints and other flammable or volatile materials are stored).
• Use the appliance only in the working position in places, where there is no risk of it being knocked over and at a sufficient distance from sources of heat (e.g. fire stoves, electric/gas stoves, cookers, etc.), and wet surfaces (kitchen sinks, wash basins etc.).
• Long hair, loose clothes or accessories and jewellery can get caught by the rotating parts of accessories. Make sure that your hair, clothes and accessories do not get into dangerous vicinity to the rotating parts!
• Do not remove accessories when the drive unit is in operation.
• Before removing accessories from the drive unit, allow the rotating parts to stop completely.
• Do not turn on the appliance without any ingredients inside!
• Do not insert accessories into any body cavities.
• Never insert your fingers into the filling opening and do not use a fork, knife, spatula, spoon, etc. Use only the supplied pusher for this purpose.
• Do not exceed the maximum operation time for the appliance, which is 5 minute. Then allow the driving unit to cool down for at least 30 minutes.
• The appliance is equipped with thermal safety fuse which disconnects current supply in case of engine overloading. If it occurs, unplug the appliance and let the appliance get cooled.
• Do not process frozen food.
• Make sure that the power cord does not come into contact with the rotating part of the appliance.
• Do not wind the power cord around the appliance; this will extend its life.
• The power cord must not be damaged by sharp or hot objects, by an open flame and it must not be submerged under water.
• Never place it on hot surfaces and do not leave it hanging over the edge of a table or a work bench. If the cord is brushed against or pulled by for example children the appliance may tip over or be pulled down and lead to serious injuries!
• If the use of an extension cord is necessary, then it must not be damaged and must meet the valid norms in force.
• Use the appliance only with accessories designed for this model. The use of other accessories may present a danger for the user.
• Only use the appliance with original accessories from the manufacturer.
• Use this appliance only for the purpose for which it was designed as specified in this user's manual. Never use the appliance for any other purpose.
• WARNING: There is a risk of injury in case of incorrect use (not in accordance with the manual) of the appliance.
• All text in other languages and pictures shown on the packaging, or the product itself, are translated and explained at the end of this language mutation.
• The manufacturer takes no responsibility for damages and injuries caused by the incorrect use of supplementary machines and accessories (e.g. ruining of foods, injury, cuts) and takes no responsibility arising from on the appliance in the case that the above safety notices were not followed.

II. DESCRIPTION OF THE APPLIANCE (FIG. 1)

A - Motor unit

A1 – Shaft

A2 – Release button

A3 – Power cord

A4 - ON / OFF / REVERSE knob

B - Mincer

B0 – Mincer body

B1 – Spiral feeder

B2 – Cutting blade

B3 – Fine mincing disc

B4 – Medium mincing disc

B5 – Coarse mincing disc

B6 – Nut

B7 – Separator

B8 – Adapter for smoked food

B9 – Pusher

B10 – Hopper

C – Grating attachment

C0 – Attachment body

C1 – Coarse grater

C2 – Fine grater

C3 – Cheese grater

C4 – Pusher

III. PREPARATION FOR USE

First remove all packaging materials, take out the grinder and all accessories. Then remove all adhesive foils, stickers and paper from the grinder and accessories. Before the first use, wash all parts, which will be in contact with food, in warm water with a mild detergent, thoroughly rinse in clear water and wipe dry or let dry. Put the assembled grinder with the selected attachments on a flat, stable, smooth and clean worktop. Provide sufficient free space for ventilation. The appliance openings allow free airflow for ventilation, and must not be covered or otherwise blocked. The feet must not be removed. Electric power socket must be easily accessible to allow easy disconnecting of the appliance in the case of emergency.

ON/OFF

Before switching the appliance on, plug the power cord A3 in the electrical socket. Then switch on the appliance by rotating the speed regulating knob A4. Speed is controlled by setting to the desired position the 1. If you want to use reverse run, first switch the grinder off and then by rotating and hold the regulating A4 knob R. The regulating knob must be held by hand in this position. Releasing the regulating knob will return it to position 0 and stop rotating. After finishing the operation, turn off the grinder by switching the same switch to "0" position.

1) Meat Grinder

Safety hints and tips

• We recommend interrupting the operation from time to time, switch off the food processor and remove the food stuck on the attachments (or blocking the attachments).
• Never let the mincer running if the hopper is empty!
• Do not mince frozen meat.
• Attach the cutting blade B2 to the spiral feeder with B1 the cutting edges facing forward.

Assembly

Assemble the mincer according to the intended use (for meat, smoked food) and mount it on the main motor unit – see Figure 1. Apply reverse procedure to disassemble the mincer and to remove it from the motor unit head. When mounting or removing the grinder, you have to push the release button A2 first.

A) Meat mincing

The mincer can mince any type of meat, which is free of bones, tendons and skin. Mincing coarseness can be adjusted by using different mincing discs (B3, B4, B5) with various sizes of openings. Cut the meat in advance into cubes of about 3x3x3 cm. Put bowl under the mincer to catch the minced meat. Put the meat cubes into the hopper so that the spiral feeder B1 can take them without being blocked, and slightly push the meat down, using the pusher B9. Proceeding like this will prevent the motor unit from becoming overloaded.

Tips

• Regularly check if the mincing disc openings are passable during the meat processing.
• If the disc openings get blocked while mincing meats of various consistency (for example bacon and liver), the juices may flow along the screw feeder shaft inside the motor unit of the mincer. Therefore pay maximum attention to ensure smooth flow of the processed food through the mincing disc. If the flow is blocked, immediately switch off the mincer, disassemble the mincer and clean all components.
• If the appliance is blocked, rotating and hold the regulatin A4 in "R" position for reverse run and release of food.

B) Smoked foods (sausages, frankfurters), etc.

Put the minced meat into hopper B10. Use the pusher B9 to slightly push the meat inside the mincer. Soak the sausage casings in warm water (for about 10 minutes) to improve their elasticity. Then put it „arranged in folds“ on the outlet piece. Let 5 cm at the end of the casing hang freely, and tie up or skewer it. Put the prepared mixture into the hopper and slightly push it down using the pusher B9. Proceed as appropriate for the respective smoked food (for example sausages, short sausages, etc.) or white pudding.

Tips

• We recommend two persons for this procedure. One puts the mixture inside, and the other holds the casing in the proper position on the outlet adapter B8. When filling the casing, proceed so that no air can get inside.
• If the outlet opening of the smoked food adapter B8 gets blocked, switch off the motor unit, remove the attachment and clean it.

2) Adapter for slicing / grating of vegetables and fruits

Safety hints and tips

• Never push down the grated/sliced fruits or vegetables by fingers! Move the food along the feed tube by the pusher, slowly, while pushing down slightly.
• Be careful when handling the graters. They employ very sharp blades.
• Never use the graters to process hard materials, for example ice cubes, coffee / cereal / corn grains, spices, etc.
• When processing a large amount of food, check if the food is not cumulating above and below the grater.
• If the grating adapter is blocked, switch off the motor unit, disassemble the adapter body and clean it.

Assembly

Assemble the adapter and mount it on the driving unit head according to Figure 1.

Apply reverse procedure to disassemble and remove the adapter from the driving unit head.

When mounting or removing the adapter, you have to push the release button A3 first.

Preparing the food

The attachments can be used for chopping, slicing, grating and scraping of almost any type of fruits or vegetables. You can use the slicing/chopping grater to process fruits, vegetables, cheese and food of similar structure. The cheese greater is designed for processing hard cheeses and making bread crumps.

Use

Put a suitable container under the grating adapter outlet. Chop the vegetables into pieces of the size fit for putting them inside the grating adapter feeding tube. Put the pieces into the adapter and slightly push by the pusher. The processed food is going out from the outlet into the provided container.

Tips

• A small amount of food will remain on the grater after each use. This is normal and does not establish a reason for filing a complaint.
• First remove peels if processing citrus fruits.
• If you are chopping hard cheese or chocolate, work for a short time, because the food heats up, becomes softer and may get lumpy.
• Before slicing cabbage, cut it into hunks and remove the cabbage stalks.
• If the appliance is blocked, rotating and hold the regulatin A4 in "R" position for reverse run and release of food.

IV. MAINTENANCE

Do not use rough and aggressive detergents! Clean drive unit A with a soft and wet cloth with a little detergent. Make sure that water does not get inside the appliance! Unplug the power cable from socket before any handling with the appliance! Wash other accessories immediately after use in hot water with detergent. Work very carefully when cleaning the knife! Note that cutting edges of the knife and grinding discs shall not come into contact with hard objects which blunt them and decrease their efficiency. After washing and drying out the components, we recommend applying cooking oil on the knife and plates. Do not use dishwasher to clean metal parts! Some agents can tinge the accessories in some way. However, this has no influence on function of the appliance and this tint usually disappears by itself after some time. Never dry plastic mouldings above heat sources (e.g. stove, electric cooker, gas cooker). Store the appliance on dry and dust-free place out of reach of children and incapable persons.

V. STORE

Store the appliance after cleaning at a dry, dustfree and safe place, out of reach of children and incapacitated people.

More extensive maintenance or maintenance requiring intervention in the inner parts of the appliance must be carried out by professional service! Failure to comply with the instructions of the manufacturer will lead to expiration of the right to repair!

The information regarding warranty and product repairs you can find on the website www.hyundai-electronics.cz/servis-eu

VI. LEGISLATIVE & ECOLOGY

WARNING: DO NOT USE THIS PRODUCT NEAR WATER, IN WET AREAS TO AVOID FIRE OR INJURY OF ELECTRIC CURRENT. ALWAYS TURN OFF THE PRODUCT WHEN YOU DON'T USE IT OR BEFORE A REVISION. THERE AREN'T ANY PARTS IN THIS APPLIANCE WHICH ARE REPARABLE BY CONSUMER. ALWAYS APPEAL TO A QUALIFIED AUTHORIZED SERVICE. THE PRODUCT IS UNDER A DANGEROUS TENTION.

Disposal of old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems).

This symbol on the product or on its packaging indicates that this product (or battery/accumulator) shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

VII. TECHNICAL DATA

Voltage (V) / Input (W) specified on the type label

Weight of drive unit (kg) about 2,79

Protection class of the appliance II.

Size of the product (mm) 299 x 151 x 311

Input in off mode is < 0.50 W

Noise level: Acoustic noise level of 90 dB(A) re 1pW

The manufacturer reserves the right to change the technical specifications and accessories for the respective models.

WARNINGS AND SYMBOLS USED ON THE APPLIANCE, PACKAGING OR IN THE INSTRUCTIONS MANUAL:

HOUSEHOLD USE ONLY. DO NOT IMMERSE IN WATER OR OTHER LIQUIDS.

TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, ARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.

WARNING

It is not allowed to dispose it together with communal waste

Please read the instructions manual

Unlocked

Locked

VI. UMWELTSCHUTZ

GENUINE PRODUCT OF HYUNDAI CORPORATION