SteelDots3 ANC - Headphones Lamax - Free user manual and instructions

Product Type	True Wireless Earbuds
Brand	Lamax
Model	SteelDots3 ANC
Bluetooth Version	5.3
Maximum Pairing Distance	Up to 15 m
Supported Audio Codecs	AAC, SBC
Earbud Battery Capacity	35 mAh
Charging Case Battery Capacity	300 mAh
Playback Time (without ANC, 50% volume)	Up to 8 h (single earbud), up to 30 h (with charging case)
Earbud Charging Time	80 min
Water Resistance	IPX5
Number of Microphones	4
Impedance	32 Ω
Sensitivity	111 dB
Frequency Range	20 Hz - 20 kHz
Weight	71 g (including case)
Active Noise Cancellation	Yes (ANC On/Off, Transparent Mode)
Controls	Touch (multifunction button on each earbud)
Box Contents	Earbuds, charging case, 2x replacement tips, USB-C cable, user manual, safety instructions
Certifications	CE, RoHS

Frequently Asked Questions - SteelDots3 ANC Lamax

How do I turn the earbuds on or off?

Remove the earbuds from the charging case to automatically turn them on. If off, hold the multifunction button for 2 seconds. To turn off, place them back in the case or hold the button for 4 seconds after disconnecting from the phone. They also auto-off after 3 minutes if disconnected.

How do I pair the earbuds with my phone?

Remove both earbuds from the case. They will automatically connect to each other (one LED blinks white quickly). Enable Bluetooth on your device and select LAMAX Steel-Dots3 ANC from the list. A voice prompt confirms pairing.

How do I control music playback?

Use the multifunction button on either earbud: tap to play/pause, double-tap for next track (right) or previous track (left), triple-tap for volume up (right) or down (left).

How do I switch between ANC modes?

Hold the multifunction button on either earbud for 1.5 seconds to cycle between ANC On (noise cancellation), Classic mode (ANC off), and Transparent mode (amplifies ambient sounds).

How do I charge the earbuds and case?

Charge the case via USB-C (max input 5V, 2A). The case LED flashes red while charging and turns solid red when full. Place earbuds in the case to charge; their LEDs glow white and turn off when fully charged. The case LED turns green briefly when earbuds are inserted.

What is the battery life?

Without ANC at 50% volume, the earbuds last up to 8 hours on a single charge. With the charging case, total playback time is up to 30 hours.

Are the earbuds water resistant?

Yes, they have an IPX5 rating, meaning they can withstand sweat and light rain but should not be submerged.

How do I reset the earbuds?

With the earbuds on and disconnected from your phone, tap the multifunction button five times. Do not reset while connected to the phone.

How do I handle calls?

Tap either earbud to answer a call. Double-tap to end or reject a call.

What audio codecs are supported?

The earbuds support AAC and SBC codecs.

USER MANUAL SteelDots3 ANC Lamax

LAMAX SteelDots3 ANC

BOX CONTENTS

1× LAMAX SteelDots3 ANC

2× Replacement tips

1× USB-C power cable

1× User manual

1× Safety instructions

PRODUCT DESCRIPTION

1) Notification LED

2) Multifunction button

2) Multifunction 3) Microphones

3) Microphones 4) Charging card

4) Charging contal 5) Charging case

3) Charging case 6) Charging care notification LED

6) Charging case 7) USB-C port

CONTROLS

Turn On	Remove the earbuds from the charging case to automatically turn them on. Hold down the multifunction button for 2 seconds if the earbuds are off.
Turn Off	Insert the earbuds back into the charging case to automatically switch them off. Hold the multifunction button for 4 seconds after disconnecting from the phone. The earbuds will automatically switch off after 3 minutes if they are disconnected.
Restart	Tap the multifunction button five times when the earbuds are on and disconnected from the phone. (Do not reset while connected to the phone.)
Play / Pause	Double tap the multifunction button on the left or right earbud.
Increase Volume	Tap the multifunction button on the right earbud.
Decrease Volume	Tap the multifunction button on the left earbud.
Next Track	Triple tap the multifunction button on the right earbud.
Previous Track	Triple tap the multifunction button on the left earbud.
Answer Call	Tap the multifunction button on the left or right earbud.
End call	Double tap the multifunction button on the left or right earbud.
Reject Call	Double tap the multifunction button on the left or right earbud.
ANC On / Classic mode / Transparent mode	Hold down the multifunction button for 1.5 seconds on the left or right earbud.
Activate Mobile Assistant	Four taps on the multifunction button on the left or right earbud.
Deactivate Mobile Assistant	Double tap the multifunction button on the left or right earbud.

PAIRING

Before first-time pairing, remove both earbuds from the charging case and put them back in to activate them.

1. Remove the earbuds from the charging case. The LEDs of both earbuds will alternately flash red and white and automatically connect to each other. One earbud will blink rapidly in white, indicating it is ready to pair.

2. Switch on Bluetooth on your device and search for LAMAX Steel-Dots3 ANC in the list of available devices. After successful pairing, an audio notification will sound, and the LEDs in both earbuds will turn off.

MODES

1. ANC On – Activates ambient noise cancellation.

2. Classic Mode – Deactivates ANC and transparent mode.

3. Transparent Mode – Amplifies ambient sounds using the earbuds' microphones

CHARGING

1. Plug the USB-C cable into the port on the back of the charging case. Plug the other end of the cable into a USB power supply (max input 5V, 2A). The notification LED flashes red while charging and turns solid red when fully charged. When the charging case battery is low, the green LED will flash four times within 1 second and then turn off.

2. Place the earbuds in the charged charging case. The earbuds' LED will glow white while charging and turn off when fully charged. When the earbuds are charging in the case, the case notification LED will turn green for 4 seconds and then turn off.

SPECIFICATIONS

Wireless technology	Bluetooth 5.3
Maximum pairing distance	up to 15 m
Supported codecs	AAC, SBC
Earbud battery capacity	35 mAh
Charging case battery capacity	300 mAh
Playback time without ANC (50% volume)	up to 30 h (with charging case) up to 8 h (single earbud)
Earbud charging time	80 min
Water resistance	IPXS
Microphones	4
Impedance	32 Ω
Sensitivity	111 dB
Frequency range	20 Hz - 20 kHz
Weight	71 g

Printing errors reserved.

CE

RoHS

LAMAX SteelDots3 ANC

VERPACKUNGSINHALT

1× LAMAX Steel

2× Ersatzstecker

1× USB-C-Stromkabel