Prime P1 - Headphones Lamax - Free user manual and instructions
Find the device manual for free Prime P1 Lamax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Lamax |
| Model | Prime P1 |
| Product Type | Wireless Over-Ear Headphones |
| Connectivity | Bluetooth 5.0 |
| Wireless Range | 10 m / 33 ft |
| Driver Diameter | 40 mm |
| Frequency Response | 20 Hz – 20 kHz |
| Impedance | 32 Ohms |
| Battery Capacity | 300 mAh |
| Playback Time | Up to 20 hours |
| Charging Time | Approx. 2 hours |
| Charging Port | USB-C |
| Microphone | Built-in, for calls |
| Controls | On-ear, volume, track skip, answer/end calls |
| Weight | 185 g |
| Foldable Design | Yes |
| Ear Cushions | Soft memory foam padding |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 60°C |
| Maintenance | Wipe with soft, dry cloth |
| Safety | Avoid prolonged use at high volume |
| Spare Parts | Replaceable ear pads and cable |
| Repairability | Battery replaceable by authorized service |
| Included Accessories | USB-C charging cable, 3.5 mm audio cable, user manual |
Frequently Asked Questions - Prime P1 Lamax
How do I pair my Prime P1 with my smartphone?
To pair your Prime P1, turn on the headphones by pressing and holding the power button until the LED indicator flashes blue and red. On your smartphone, enable Bluetooth and select Lamax Prime P1 from the available devices. If a PIN is requested, enter 0000.
How long does the battery last?
The Prime P1 offers up to 20 hours of playback time on a full charge. Battery life may vary depending on volume level and audio content.
How do I recharge the headphones?
Connect the included USB-C cable to the charging port on the headphones and plug the other end into a USB power source. A red LED indicates charging, and it turns blue when fully charged. A full charge takes approximately 2 hours.
Can I use the headphones while they are charging?
Yes, the Prime P1 can be used while charging via the USB-C cable. However, for optimal battery health, it is recommended to unplug them once fully charged.
Are the headphones compatible with voice assistants?
Yes, the built-in microphone allows you to activate your smartphone's voice assistant (e.g., Siri or Google Assistant) by triple-pressing the multifunction button.
How do I reset the headphones?
To reset the Prime P1, turn off the headphones, then press and hold the volume up and multifunction button simultaneously for about 5 seconds. The LED will flash quickly, indicating a successful reset.
What should I do if the sound is distorted?
First, check that the audio source is not at maximum volume. If distortion persists, reset the headphones as described. Also ensure there is no interference from other wireless devices and keep the headphones within the Bluetooth range (10 m).
Are the ear cushions replaceable?
Yes, the ear cushions are replaceable. Gently pull the old cushions off and snap the new ones into place. You can order genuine spare parts from Lamax service centers or authorized retailers.
Is Prime P1 water-resistant?
No, the Prime P1 is not water-resistant. Keep them away from rain, splashes, and high humidity. Avoid using them during heavy sweating or in the rain.
How do I make a call with these headphones?
While connected to your phone, press the multifunction button to answer an incoming call. Press again to end the call. To reject a call, press and hold the same button for about 2 seconds. The built-in microphone captures your voice clearly.
User questions about Prime P1 Lamax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual Prime P1 - Lamax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Prime P1 by Lamax.