Clips1 Plus - Headphones Lamax - Free user manual and instructions

Product Type	True Wireless Earbuds
Brand	Lamax
Model	Clips1 Plus
Connectivity	Bluetooth 5.3
Supported Codecs	AAC, SBC
Battery Capacity (Earbud)	45 mAh
Battery Capacity (Charging Case)	380 mAh
Playback Time	Up to 8 hours
Charging Time (Earbuds)	2 hours
Charging Time (Case)	2 hours
Weight (Single Earbud)	4 g
Weight (With Case)	44 g
Maximum Range	Up to 15 meters
Active Noise Cancellation	Yes, with ANC On/Off and Transparency mode
Controls	Multifunction button on each earbud (tap, double tap, hold, triple tap, quadruple tap)
Charging Port	USB-C
LED Indicators	White (pairing/charged), Red (charging)
Auto Power On/Off	Automatic when removed/inserted from charging case
Maintenance	Clean with dry cloth; remove protective film on charging pins before first use
Package Contents	Earbuds, Charging case, USB-C cable, User manual

Frequently Asked Questions - Clips1 Plus Lamax

How do I pair LAMAX Clips1 Plus with my phone?

Remove the earbuds from the charging case. They will automatically connect to each other. One earbud flashes white (master). Enable Bluetooth on your device and select LAMAX Clips1 Plus from the list. An audio notification confirms pairing.

How do I reset the earbuds if pairing fails?

Remove the earbuds from your phone's Bluetooth list. Insert both earbuds into the charging case and press and hold the button on the case for 10 seconds. The LEDs will flash red five times. Then repeat the pairing process.

How do I adjust the volume?

Double tap the multifunction button on the right earbud to increase volume, double tap on the left earbud to decrease volume.

How do I activate Active Noise Cancellation (ANC)?

Triple tap the multifunction button on the right earbud to cycle through ANC On, ANC Off, and Transparency mode.

How do I use Transparency mode?

Triple tap the multifunction button on the right earbud until you reach Transparency mode. This amplifies ambient sounds using the microphones.

How long does the battery last?

The earbuds provide up to 8 hours of playback on a single charge. The charging case can recharge them multiple times.

How do I charge the earbuds and case?

Plug the USB-C cable into the charging case and a USB power adapter (5V/2A max). The case LED glows red while charging, white when full. Insert earbuds into the case to charge them; the earbud LED glows red and turns white when fully charged.

Can I use only one earbud?

Yes, the earbuds can be used independently. Each earbud pairs separately with your device.

How do I skip to the next or previous track?

Hold down the multifunction button on the right earbud for 2 seconds to go to the next track, hold the left earbud button for 2 seconds for the previous track.

How do I activate the voice assistant?

Tap the multifunction button on the left earbud four times to activate your device's mobile assistant (e.g., Siri, Google Assistant).

USER MANUAL Clips1 Plus Lamax

4) Charging station button

CONTROLS

Switch on	Hold the multi-function button for 5 seconds
Switch off	Hold the multi-function button for 5 seconds
Play / Pause	Tap the multi-function button
Volume up	Double tap the multi-function button on the right handset
Volume down	Double tap the multi-function button on the left handset
Next track	Hold down the multi-function button on the right handset for 2 seconds
Previous track	Hold down the multi-function button on the left handset for 2 seconds
Answer call	Tap the multi-function button
End call	Hold the multi-function button for 1 second
Reject a call	Hold the multi-function button for 2 seconds
ANC ON / ANC OFF /Transparency modes	Triple tap on the right earpiece multifunction button
Music/game mode	Triple tap on the left earpiece multifunction button
To activate the mobile assistant	Four taps on the multi-function button on the left handset

SWITCHING ON

The headphones automatically switch on when removed from the charging station. To switch on manually, hold the multi-function button for 5 seconds. An audible notification will sound when switched on.

SWITCHING OFF

The headphones automatically switch off when inserted into the charging station. To switch off manually, hold the multi-function button for 5 seconds. An audible notification will sound when switching off.

PAIRING

1. Remove the headphones from the charging station. The headphones will automatically connect to each other. One headset will be the master and ready for pairing, this is indicated by a white flash. Another headset will glow white.

2. Switch on Bluetooth on your device and search for LAMAX Clips1 Plus in the list of available Bluetooth devices. After successful pairing, an audio notification will sound. The LEDs in both headphones will turn off.

If you have problems pairing, remove the headphones from the list of paired devices on your phone. Insert the headphones into the charging station and hold the charging station button for 10 seconds. The LEDs on both headphones will flash red five times. Then pair them as described in step 1.

ANC AND TRANSPARENCY MODE

Mode order

1. ANC on - switching on active ambient noise cancellation

2. ANC off - switching off active ambient noise cancellation. Stan-

dard mode

1. Transparency mode - amplification of ambient sounds thanks to

microphones in the headphones

CHARGING

To charge the charging station, plug the cable into the USB-C port on the back of the charging station and plug the other end of the cable into a USB power supply with a maximum input voltage of 5V and a current of 2A. The light glows red when the charging station is charging. When fully charged, it will glow white.

Before using for the first time, be sure to remove the transparent protection film on the charging pins from the inside of both headphones.

To charge the headphones, insert them into the charged charging station. When charging, the LED in the headphones lights red. When fully charged, the LEDs will glow white for 30 seconds, then turn off.

PARAMETERS

Wireless technology	Bluetooth 5.3
Maximum pairing distance	up to 15 meters
Supported codecs	AAC, SBC
Battery capacity in the handset	45 mAh
Charging station battery capacity	380 mAh
Playback time	up to 8 hours on a single charge
Charging time of headphones	2 hours
Charging time of the charging station	2 hours
Weight of one handset	4 g
Weight with charging station	44 g

Printing errors reserved.

Download the current version of the user manual here: https://lamax-electronics.com/clips1-plus/manual

CE RoHS

LAMAX Clips1 Plus

BESCHREIBUNG

https://lamax-electronics.com/clips1-plus/manual

CE RoHS

LAMAX Clips1 Plus

POPIS

1) Notifikační LED

ANC A TRANSPARENCY MÓD

Pořadí módů:

REŽIM ANC A TRANSPARENTNOSTI

Objednávka režimu:

1. ANC on – zapnutie aktivneho potlačenia okolitého hluku

2. ANC off – vypnutie aktivneho potlačenia okolitého hluku. Štandardný režim

3. Režim Transparency – zosilnenie okolitych zvukov vdaka mikro-fónom v slúchadlách

NABÍJANIE

Ak chcete nabíjať nabíjaciu stanicu, zapojte kábel do portu USB-C na zadnej strane nabíjacej stanice a druhý koniec kábla zapojte do napájacieho zdroja USB s maximálnym vstupným napátím 5 V a prúdom 2 A. Ked' sa nabíjacia stanica nabíja, LED dióda svieti na červeno. Po úplnom nabití bude svietiť na bielo.

https://lamax-electronics.com/clips1-plus/manual

LAMAX Clips1 Plus

OPIS

ANC AND TRANSPARENCY MODE