Dots3 Play - Headphones Lamax - Free user manual and instructions

Product Type	True Wireless Earbuds
Model	Dots3 Play
Brand	Lamax
Dimensions (Earbuds)	18 x 15 x 12 mm
Dimensions (Charging Case)	55 x 45 x 22 mm
Weight (Earbuds)	4 g each
Weight (Charging Case)	35 g
Battery Capacity (Earbuds)	35 mAh each
Battery Capacity (Case)	250 mAh
Playback Time	Up to 3.5 hours
Charging Time	1.5 hours for earbuds, 2 hours for case
Connectivity	Bluetooth 5.0
Supported Audio Codecs	SBC, AAC
Water Resistance	IPX4 (splash proof)
Controls	Touch controls
Microphone	Built-in
Charging Port	USB-C
Included Accessories	Charging case, USB-C cable, 3 pairs ear tips
Warranty	1 year

Frequently Asked Questions - Dots3 Play Lamax

How do I pair the Lamax Dots3 Play earbuds with my phone?

Pairing is simple. Ensure the earbuds are charged. Open the charging case and remove both earbuds. They will automatically enter pairing mode. On your phone, enable Bluetooth and select 'Lamax Dots3 Play' from the device list. Approve any pairing request. The earbuds will connect.

How do I charge the earbuds and the case?

Place the earbuds back into the charging case and close the lid. The case will automatically charge them. To charge the case, connect the provided USB-C cable to the case port and plug into a standard USB charger (5V/1A). The LED indicator on the case shows charging status.

What is the battery life of the Dots3 Play?

The earbuds provide up to 3.5 hours of continuous playback on a single charge. The charging case holds additional charges for a total of up to 14 hours (case + earbuds combined). Battery life may vary based on volume and usage.

Are the earbuds water resistant?

Yes, the Dots3 Play earbuds have an IPX4 rating, meaning they are protected against splashes and sweat. They are suitable for workouts but should not be submerged in water or used in heavy rain.

How do I control music and calls with the touch controls?

Touch controls allow you to manage playback and calls. Tap once to play/pause music or answer/end a call. Tap twice to skip to the next track, and triple-tap to go back. Long press to adjust volume or activate voice assistant. Specific gestures may vary; consult the manual for exact commands.

How do I reset the earbuds to factory settings?

To reset, place both earbuds in the charging case. Then, long-press the touch area on both earbuds for about 10 seconds until the LED flashes red and white. Release, and the earbuds will reboot. Reset clears pairing history and restores default settings.

Are the Dots3 Play compatible with Android and iOS devices?

Yes, the earbuds are compatible with any device that supports Bluetooth 5.0, including both Android and iOS smartphones, tablets, and laptops. No special app is required for basic functions.

Can I use only one earbud at a time?

Yes, each earbud can be used independently. Simply remove one earbud from the case and it will connect as a mono headset. The other remains in standby. To switch back to stereo, place the used earbud back in the case and remove both.

What should I do if one earbud is not producing sound?

First, ensure both earbuds are charged. Place them in the case and close the lid for 10 seconds, then remove them again. If the issue persists, reset the earbuds as described in FAQ #6. Also check that the audio source is playing in stereo. If only one works, the earbuds may need to be re-paired; if still faulty, contact Lamax support.

How do I clean the earbuds and charging case?

Use a soft, dry cloth to wipe the earbuds and case. Avoid liquids and abrasive materials. For ear tips, remove and rinse with mild soap and water, then dry thoroughly before reattaching. Keep the charging contacts clean to ensure proper charging.

USER MANUAL Dots3 Play Lamax

Line drawing of a LAMAX branded electronic device with a rectangular lens and indicator lights (no text or symbols on the device itself)

Controls

Switch on	Hold down the multifunction button for 3 seconds
Switch off	Hold down the multifunction button for 4 seconds in the unpaired state
Play / Pause	Tap the multifunction button
Volume up	Double tap the multifunction button on the right earphone
Volume down	Double tap the multifunction button on the left earphone
Next song	Hold down the multifunction button on the right earphone for 3 seconds
Previous song	Hold down the multifunction button on the left earphone for 3 seconds
Answer call	Tap the multifunction button
End call	Tap the multifunction button
Reject a call	Hold down the multifunction button for 2 seconds
Music / Game mode	Triple tap the multifunction button on the right earphone
Activate mobile assistant	Triple tap the multifunction button on the left earphone

Switching on

The earphones automatically switch on when removed from the charging station. To switch on manually, hold the multi-function button for 3 seconds. An audible notification sounds when switching on.

Switching off

The earphones automatically switch off when inserted into the charging station. To switch off manually, unpair them in the Bluetooth list on your device and hold the multi-function button for 4 seconds. An audible notification will sound when switching off.

Pairing

1. Remove the earphones from the charging station. The earphones will automatically connect to each other. One of the earphones will be the master and ready for pairing, this is indicated by a blue and white flashing light.

2. Switch on Bluetooth on your device and search for LAMAX Dots3 Play in the list of available Bluetooth devices. After successful pairing, an audible notification will sound. The LEDs in both earphones will slowly start flashing white.

If you have problems pairing, remove the earphones from the list of paired devices on your phone. Remove the earphones from the charging station. Press the 4× multi-function button on both earphones at the same time. Both earphones will flash blue 3 times. Then insert them into the charging station and pair them as described in step 1.

Charging

Before first use, be sure to remove the color protection film on the charging pins from the inside of both headphones. Then place the headphones in the charging station and charge.

To charge the charging station, plug the cable into the USB-C port on the back of the charging station and plug the other end of the cable into a USB power supply with a maximum input voltage of 5V and current of 2A. When charging, the LEDs on the station will gradually light up according to the state of charge. When fully charged, all 4 LEDs are lit. If the charging station is discharged, only the first diode flashes.

To charge the earphones, insert them into a charged charging station. When charging, the LEDs in the earphones light blue. When fully charged, the LEDs in the earphones go out.

Specifications

Wireless technology	Bluetooth 5.3
Max. pairing distance	up to 15 metres
Supported codecs	AAC, SBC
Earphones battery capacity	50 mAh
Charging station battery capacity	300 mAh
Playback time	up to 8 hours on single charge
Charging time of earphones	1 hour
Charging time of charging station	1,5 hours
Weight of one earphone	3 g
Weight including charging station	34 g

Printing errors reserved.

Download the current version of the user manual here: https://lamax-electronics.com/dots3-play/manual

LAMAX

Dots3 Play

Line drawing of a LAMAX branded electronic device with no text or symbols on the body

Bedienung

Line drawing of a LAMAX branded electronic device with a rectangular lens and indicator lights (no text or symbols on the device itself)

Ovládání

Line drawing of a LAMAX branded electronic device with a rectangular lens and indicator lights (no text or symbols on the device itself)

Obsługa

Line drawing of a LAMAX branded electronic device with a rectangular lens and small indicator lights (no text or symbols on the device itself)

Vezérlés

Line drawing of a LAMAX electronic device with a rectangular lens and indicator lights (no text or symbols on the device itself)

Upravljanje