Clips1 Play - Headphones Lamax - Free user manual and instructions

Product Type	Clip-on Wireless Headphones
Brand	Lamax
Model	Clips1 Play
Color	Black (typical)
Dimensions	Approx. 4.5 x 4.5 x 2.5 cm (earpiece)
Weight	Approx. 15 g per earpiece
Connectivity	Bluetooth 5.0
Battery Type	Li-Ion, 80 mAh per earpiece
Battery Life	Up to 6 hours playback
Charging Time	Approx. 1.5 hours
Charging Port	USB-C
Driver Size	13 mm
Frequency Response	20 Hz - 20 kHz
Impedance	32 Ω
Microphone	Built-in, omnidirectional
Water Resistance	IPX4 (sweat and splash resistant)
Controls	Multi-function button, volume rocker
Clip Material	Flexible plastic with silicone grip
Compatibility	iOS, Android, Windows, Mac
In the Box	Clips1 Play headphones, charging cable, user manual

Frequently Asked Questions - Clips1 Play Lamax

How do I pair the Clips1 Play with my phone?

Turn on the headphones by pressing the multi-function button for 3 seconds. Enable Bluetooth on your phone and select 'Lamax Clips1 Play' from the list. The LED indicator will flash blue and red while pairing.

How long does the battery last?

The battery lasts up to 6 hours of continuous playback at moderate volume. Charging time is approximately 1.5 hours via USB-C.

Are the headphones water resistant?

Yes, they have an IPX4 rating, meaning they are resistant to sweat and light splashes. Do not submerge them in water.

Can I use just one earpiece?

Yes, the Clips1 Play supports mono mode. Simply take one earpiece out of the case and it will connect automatically. The other can be used later for stereo.

How do I reset the headphones?

If you encounter connection issues, place both earpieces in the charging case, then press and hold the multi-function button on each earpiece for 10 seconds until the LED flashes red and white. Re-pair with your device.

Do the headphones have a microphone?

Yes, each earpiece has a built-in omnidirectional microphone for hands-free calls and voice assistant access.

How do I control music playback?

Use the multi-function button to play/pause (single press) and answer/end calls. The volume rocker adjusts volume (press up/down) and skips tracks (hold up/down).

Are the ear clips comfortable for long use?

The clips are ergonomically designed with a silicone grip that fits snugly on the ear without pressure. They are suitable for extended wear during sports or daily activities.

Can I use these headphones for running?

Absolutely. The secure clip-on design and IPX4 water resistance make them ideal for running, gym workouts, and other physical activities.

What is the range of the Bluetooth connection?

The Bluetooth 5.0 provides a stable connection up to 10 meters (33 feet) in open space. Walls and obstacles may reduce the range.

USER MANUAL Clips1 Play Lamax

Switch on	Hold the multi-function button for 3 seconds
Switch off	Hold the multi-function button for 5 seconds
Play / Pause	Tap the multi-function button
Volume up	Double tap the multi-function button on the right handset
Volume down	Double tap the multi-function button on the left handset
Next track	Hold down the multi-function button on the right handset for 3 seconds
Previous track	Hold down the multi-function button on the left handset for 3 seconds
Answer call	Tap the multi-function button
End call	Hold the multi-function button for 1 second
Reject a call	Hold the multi-function button for 2 seconds
To activate the mobile assistant	Triple tap the multi-function button on the left handset

SWITCHING ON

The headphones automatically switch on when removed from the charging station. To switch on manually, hold the multi-function button for 3 seconds. An audible notification will sound when switched on.

SWITCHING OFF

The headphones automatically switch off when inserted into the charging station. To switch off manually, hold the multi-function button for 5 seconds. An audible notification will sound when switching off.

PAIRING

1. Remove the headphones from the charging station. The headphones will automatically connect to each other. One of the headphones will be the master and ready for pairing, this is indicated by a blue blink.

2. Switch on Bluetooth on your device and search for LAMAX Clips1 Play in the list of available Bluetooth devices. After a successful pairing, an audio notification will sound and the LED on one of the headphones will light up blue and turn off after a while.

If you have problems pairing, remove the headphones from the list of paired devices on your phone. Insert the headphones into the charging station and then remove them. Press the multi-function button on both headphones 6 times at the same time. Both headphones will flash 5 times. Then pair them as described in step 1.

CHARGING

To charge the charging station, connect the cable to the USB-C port on the back of the charging station and plug the other end of the cable into a USB power supply with a maximum input voltage of 5V and current of 2 A.

The LED will flash red when charging. When fully charged, the LED will glow red. If the charging station is discharged, the LED will flash blue.

PARAMETERS

Wireless technology	Bluetooth 5.3
Maximum pairing distance	up to 15 m
Supported codecs	AAC
Battery capacity in the handset	40 mAh
Charging station battery capacity	250 mAh
Playback time	up to 7 h on a single charge
Charging time of headphones	60 minutes
Charging time of the charging station	100 minutes
Weight of one handset	4 g
Weight with charging station	47 g

Printing errors reserved.

Download the current version of the user manual here: https://lamax-electronics.com/clips1play/manual

CE RoHS

LAMAX Clips1 Play

BESCHREIBUNG

https://lamax-electronics.com/clips1play/manual

CE

RoHS

LAMAX Clips1 Play

OPIS

1) Obvestila LED

2) Vecnamenski gumb 3) Milanof

https://lamax-electronics.com/clips1play/manual

CE RoHS

LAMAX Clips1 Play

OPIS

1) LED obavijesti

2) Visenamjenska tipka 3) Milan f

3) Mikrofon 4) Isla ma av

4) Igie za punjenje

SADRŽAJ PAKIRANJA

1× LAMAX Clips1 Play