VT-2330 B - Hair Dryer Vitek - Free user manual and instructions

Brand	Vitek
Model	VT-2330 B
Product Type	Hair Dryer
Power Supply	220-240 V ~ 50 Hz
Power Consumption	1800-2200 W
Air Flow Speeds	2 speeds (low, high)
Heat Settings	3 levels (low, medium, high)
Cool Shot Button	Yes, for setting hairstyle
Nozzle	Concentrator nozzle included
Oil Dispenser	Yes, with sponge for oil application
Overheating Protection	Automatic shut-off if air is too hot
Hanging Loop	Yes, for storage
Cleaning	Wipe with damp cloth, do not immerse in water
Operating Life	3 years
Safety Features	RCD recommended; do not use near water; thermal protection
Included Accessories	Hair dryer, nozzle, oil dispenser, instruction manual
Usage	Household use only; for drying and styling hair

Frequently Asked Questions - VT-2330 B Vitek

How do I use the cool shot function?

Press and hold the cool shot button (3) while the hair dryer is on to release cool air. This helps set your hairstyle by directing cool air for 2-5 seconds on each lock.

How do I use the oil dispersion feature?

First, remove the oil dispenser (8) from the unit. Remove the lid (9) and add 2-3 drops of cosmetic oil to the sponge (10). Replace the lid and attach the dispenser back to the hair dryer. Then, install the nozzle and use as normal; hot air passes through the sponge to disperse oil particles onto hair.

How do I clean the hair dryer?

Unplug the hair dryer. Clean the body with a damp cloth and wipe dry. Never immerse in water or other liquids. Do not use abrasive cleaners or solvents.

What should I do if the hair dryer overheats and stops?

The overheating protection automatically switches off the hair dryer if outgoing air is too hot. Set the switch to '0', unplug, and ensure air inlets and outlets are not blocked. Let it cool for 5-10 minutes, then restart.

Can I use the hair dryer in the bathroom?

Yes, but with caution. Do not use near water-filled containers (bathtub, sink). After use in a bathroom, unplug the device immediately, as water proximity is dangerous even when switched off. For extra safety, install a residual current device (RCD) with a rated residual operating current not exceeding 30 mA.

How do I straighten my hair with this hair dryer?

Set heat to maximum and speed to desired level to pre-dry hair. When almost dry, switch off, attach the nozzle, and reduce heat. Divide hair into locks. Use a round brush to brush each lock downward while directing hot air from the nozzle from root to tip. Straighten lower layers first, then middle, then upper.

What attachments are included?

The package includes the hair dryer, one concentrator nozzle, an oil dispenser with sponge, and an instruction manual. Use only the supplied attachments.

What are the power specifications?

The hair dryer operates on 220-240 V ~ 50 Hz with a power consumption of 1800-2200 W. Before use, ensure your mains voltage matches.

How do I store the hair dryer?

Always unplug after use. Let it cool down, then store in a dry, cool place out of reach of children. Use the hanging loop (7) for convenient hanging, ensuring no water gets on the unit. Do not wind the cord around the hair dryer.

What should I do if the hair dryer stops working?

First, check if the overheating protection has activated. If not, verify the power cord and plug are undamaged. If the unit still doesn't work, do not attempt repair yourself. Contact an authorized service center for all repair issues.

USER MANUAL VT-2330 B Vitek

The hairdryer is intended for hair drying and styling.

DESCRIPTION

1. Air flow speed switch (0/
2. Heating degree switch

3. Cool shot button

4. Nozzle

5. Air inlet grid

6. Handle

7. Hanging loop

Oil dispenser

1. Dispenser

2. Dispenser lid

3. Sponge for oil

ATTENTION!

• Do not use the unit near containers filled with water (such as bath, swimming pool etc.).
• After using the hairdryer in a bathroom, disconnect the power plug from the mains socket, as water closeness is dangerous even if the unit is switched off.
• For additional protection you can install a residual current device (RCD) with nominal operation current not exceeding 30 mA into the bathroom mains; when installing, contact a specialist.

SAFETY MEASURES

Before using the unit, read this instruction manual carefully and keep it for future reference.

Use the unit for intended purposes only, as specified in this manual. Mishandling the unit can lead to its breakage and cause harm to the user or damage to his/her property.

• Before switching the unit on, make sure that your home mains voltage corresponds to the unit operating voltage.
• To avoid fire, do not use adapters for connecting the unit to the mains.
• Use only the attachment supplied with the unit.
• When using the unit, we recommend to unwind the power cord to its full length.

• The power cord should not:
- touch hot objects,
- run over sharp edges,
- be used for carrying the unit.
- Check the power cord and power plug insulation integrity periodically.
- Do not switch the unit on in places where aerosols are sprayed or highly inflammable liquids are used.
- Hair spray should be applied only after hair styling is finished.
- Do not operate the unit while taking a bath.
• Never leave the operating unit unattended.
- Do not touch the unit body, the power cord or power plug with wet hands.
• Take the switched on hair dryer by its handle only.
- Do not place and do not keep the unit in places, wherefrom it can fall into a bath or a sink filled with water, do not immerse the unit into water or other liquids.
- If the unit is dropped into water, unplug it immediately, and only then take it out of the water.
- Do not use the unit when you are drowsy.
- Do not use the unit to style wet hair or synthetic wigs. Avoid contact of heated surfaces with your face, neck and other parts of your body.
- Do not drop the unit.
- During operation do not put the unit on heat-sensitive and soft surfaces (bed or sofa) and do not cover it.
- Do not direct hot air into your eyes or other heat-sensitive parts of your body.
- The nozzle and the oil dispenser heat up during the operation. Allow them to cool down before removal.
- Before soaking the sponge in oil, remove the dispenser from the unit body. Do not soak the sponge in excessive amount of oil to avoid its leaking inside the unit.
- Never insert any foreign objects into the unit body openings.
- Never block the air inlets of the hairdryer, do not place it on a soft surface (such as a bed or couch), where the air inlets may

ENGLISH

be blocked. Keep the air inlets free of lint, dust, hair etc.

• Avoid getting of hair into the air inlet grid during operation of the unit.
• Unplug the unit after every usage and before cleaning.
• When unplugging the unit, pull the power plug but not the power cord.
• For children safety reasons do not leave polyethylene bags, used as a packaging, unattended.
• Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!
• Do not allow children under 8 years of age to touch the unit body, the power cord or the power plug during operation of the unit.
• Do not leave children unattended to prevent using the unit as a toy.
• Close supervision is necessary when children under 8 years of age or disabled persons are near the operating unit.
• This unit is not intended for usage by children under 8 years of age.
• Children aged 8 and over as well as disabled persons can use this unit only under supervision of a person who is responsible for their safety, if they are given all the necessary and understandable instructions concerning the safe usage of the unit and information about danger that can be caused by its improper usage.
• To avoid damages, transport the unit in original package only.
• Never use the unit if the power cord or plug is damaged, if the unit works improperly or after it was dropped. Do not try to repair the unit by yourself. Contact an authorized service center for all repair issues.
• Keep the unit in a dry cool place out of reach of children and disabled persons.

After unit transportation or storage under cold (winter) conditions, it is necessary to

keep it for at least two hours at room temperature before switching on.

• Before switching the unit on, make sure that your home mains voltage corresponds to unit operating voltage.
• Remove any stickers that can prevent unit operation.
• Unwind the power cord completely.
• Insert the power plug into the mains socket.
• Use the switch (1) to set the required air supply speed:
  «0» – the hairdryer is off;
  «» – low speed;
  «» – high speed.
• Set the required air flow temperature using the switch (2):
  « }» - low heating;
  « » - medium heating;
  « » – maximum heating.

Note: During the first operation some foreign smell and a small amount of smoke from the heating element is possible, this is normal.

- This model has a cool air supply function, use it to fix your hairstyle. For cool air supply, switch the hairdryer on and then press and hold down the button (3)

Hair care

To get the best results, wash your hair with shampoo, remove excessive moisture with a towel, comb your hair, then start drying and styling it.

Quick drying

Set the switch (2) to the maximum heating position « », select the required air supply speed using the switch and dry your hair. Shake off excessive moisture from the hair with your hand or a comb and constantly move the hairdryer above your hair.

Straightening

Set the switch (2) to the maximal heating position , select the required air supply speed using the switch (1) and dry your hair preliminarily. When the hair is almost

ENGLISH

dry, switch the unit off, set the nozzle (4), decrease the heating degree using the switch (2) and set the required air flow speed using the switch.

Divide your hair into locks, start straightening from the lower layers. Using a plain or a round brush, brush the hair downwards and simultaneously direct hot air from the nozzle (4) at your hair. This way, slowly straighten each lock from root to end. After you finish straightening the lower locks, start straightening the locks of the middle layer and finish with the locks of the upper hair layer.

Natural wavy hairstyle

Set the switch (2) to the low heating position; select the low air supply speed by setting the switch into position « ». Grip locks between fingers tightly, turn them in the direction of natural curling. Dry your hair, directing the airflow between fingers. When the required effect is achieved, press and hold down the cool shot button (3) and fix each lock.

Styling

Attach the nozzle (4) to the hairdryer and then set the switches (1, 2) to the low heating/low speed positions « »/«.

Divide your hair into locks and create a required hair style by means of a round hair-styling brush. During hair styling, direct the air flow straight at your hair.

If you want to fix the hairstyle, direct the cool air flow at each lock for 2-5 seconds. Styling time is determined individually according to hair type; you can adjust it by yourself.

Oil dispersion function

Use cosmetic oil for hair care. Hot air flow passes through the sponge (10) and speeds up the evaporation, oil particles accumulate on the hair and provide additional hair care during styling.

Attention!

To avoid getting of oil into the unit, first remove the dispenser (8) from the unit body and soak the sponge (10) in a small amount of oil (no more than 2-3 drops).

- Make sure that the unit is unplugged.

• If the dispenser (8) is installed on the unit body, remove the dispenser (8).
• Remove the lid (9) rotating it clockwise.
• Add 2-3 drops of oil on the sponge (10).
• Place the ledges of the lid (9) into the grooves on the dispenser (8) and rotate the lid counterclockwise until it is fixed.
• Place the dispenser (8) on the unit body.
• Install the nozzle (4).

Overheating protection

Overheating protection switches the hairdryer off if the outgoing air is too hot. If the hairdryer has been switched off during operation, set the switch to the «0» position, unplug the hair-dryer and make sure that the inlets and outlets are unblocked. Let the hairdryer cool down for 5-10 minutes and switch it on again. Do not block the air inlets during unit operation and avoid getting of hair into its air inlet.

CLEANING AND CARE

The hair dryer is intended for household usage only.

1. Set the switch to the «0» position and disconnect the hairdryer from the mains.
2. Clean the unit body with a damp cloth and then wipe it dry.
3. Never immerse the unit into water or other liquids.
4. Do not use abrasives and solvents to clean the unit body.

STORAGE

• Always unplug the hairdryer if you are not using it.
• Let the unit cool down after use and keep it in a dry cool place out of reach of children.
• Never wind the cord around the hairdryer, as it can damage the unit. Handle the power cord with care, do not pull, twist or stretch it, especially near the power plug or at the junction point. Straighten the cord periodically if it gets twisted during hairdryer operation.
• For easy storing there is a hanging loop (7), you can hang the unit on this loop provided that no water gets on the unit in this position.

ENGLISH

DELIVERY SET

Hairdryer - 1 pc.

Nozzle - 1 pc.

Oil dispenser - 1pc.

Instruction manual - 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V \~ 50 Hz

Power consumption: 1800-2200 W

The manufacturer preserves the right to change the specifications of the unit without a preliminary notification.

Unit operating life is 3 years

Guarantee

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as laid down by the Council Directive 2004/108/EC and to the Low Voltage Regulation (2006/95/EC)

DEUTSCH

HAARTROCKNER VT-2330 B

A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxx means that the item was manufactured in June (the sixth month) 2006.

DE