Vitek VT-2275 CL - Hair Dryers

VT-2275 CL - Hair Dryers Vitek - Free user manual and instructions

Find the device manual for free VT-2275 CL Vitek in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vitek VT-2275 CL - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
BrandVitek
ModelVT-2275 CL
Product TypeHair Dryer
Power Supply220-240 V ~ 50/60 Hz
Power Consumption2000 W (estimated)
Airflow Speeds2 (Low/High) plus Off (0-1-2 switch)
Heat Settings3 (Low/Medium/High, switch positions 1-2-3)
Cool Shot ButtonYes, for fixing hairstyle
Concentrating NozzleIncluded for directed airflow
Detachable Air Inlet GrillYes, for easy cleaning
Hanging LoopYes, for storage
Overheating ProtectionYes, automatic shut-off
Safety FeaturesDo not use near water; RCD recommended
CleaningRemove and clean air inlet grill regularly
MaintenanceUnplug before cleaning; do not immerse in water

Frequently Asked Questions - VT-2275 CL Vitek

Can I use the hair dryer near water?
No, the hair dryer must not be used near bathtubs, swimming pools, or other water reservoirs. If it falls into water, unplug it immediately before retrieving it. For bathroom use, disconnect after each use.
What is the Cool Shot button for?
The Cool Shot button releases a burst of cold air to help set and fix your hairstyle after styling. Press and hold the button to activate.
How do I clean the air inlet grill?
Regularly remove and clean the detachable air inlet grill to prevent lint and dust buildup. Use a soft brush or cloth; do not use water. Ensure the dryer is unplugged before cleaning.
What do the switch positions mean?
The airflow speed switch has positions 0 (off), 1 (low), and 2 (high). The heating degree switch has positions 1 (low heat), 2 (medium heat), and 3 (high heat).
Can I use the hair dryer in the bathroom?
Yes, but with caution. Always unplug the dryer after use, even if switched off, as proximity to water is dangerous. For additional safety, install a residual current device (RCD) with a rating no higher than 30 mA.
How do I use the concentrating nozzle?
Attach the concentrating nozzle to the hair dryer to direct airflow onto specific sections of hair. This helps for precise styling, such as straightening or adding volume.
What is the overheating protection?
The hair dryer is equipped with an automatic overheating protection function. If the appliance becomes too hot, it will shut off to prevent damage. Allow it to cool down before restarting.
How should I store the hair dryer?
Use the hanging loop to store the hair dryer in a dry place, away from water and heat sources. Ensure it is fully cool and disconnected from power before storing.
What voltage does the hair dryer require?
The hair dryer operates on a standard household voltage of 220-240 V ~ 50/60 Hz. Check the rating label on the product to confirm.
Does the hair dryer come with a warranty?
Warranty details are provided with the product. Refer to the warranty card or contact Vitek support for specific terms and conditions.

User questions about VT-2275 CL Vitek

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Hair Dryers in PDF format for free! Find your manual VT-2275 CL - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VT-2275 CL by Vitek.

USER MANUAL VT-2275 CL Vitek

ENGLISH

HAIR DRYER

DESCRIPTION

  1. Airflow speed switch (0-1-2)

  2. Heating degree switch

  3. Cool tooth button

  4. Detachable air inlet (in)

  5. Point for kerosing

  6. Lyckel for hanging

  7. Concentrating sorble

  8. Concentrating index

Attention! Do not use

by any reservoirs containing water (bathtub,

swimming pool, etc.).

- When using inside a bathroom, always dis-

connect the appliance from wall outlet after

usage; in particular, unplug power cord from

wall outlet, as proximity to water is danger-

bus even in the appliance is switched off.

- For additional provisions, it is not reasonable to install residual current device (BCCO) with

to install residual current delta (NOS) with rated operating current no higher (then 30

mA into power supply circuit of your bath-

room. Apply to compete

stallation.

[Non-Text]

Important safety measure

When using electric devices, especially in

presence of children, fat

measures including the following:

Read an operating list ing the lab rows

ing the half dryer.

In order to avoid risk of

• Before switching hair

power supply voltage m

age of the appliance.

- Disconnect hair dryer f

usage.

- Do not put, leave or stop

placed from where it is infect or besti filed

- Do not use hair does yet

• Do not immerse the age

any other liquid.

• In case of appliance fa

unplug power cord from

forwards you can take

water.

- Do not leave operating

43.

- special care should be

  1. Use the appliance only

poses. Use only the no

delivery set.

- it is forbidden to use

power cord plug is dar

interrupted from time to

ance failing into water.

service center in case of

- Keep power cord at dis

  1. Gains the effects of

- Closing all robbers of the birden. Do not put hai

faces for instance on I

inlets or outlets would be

openings are not pollut

fluff, etc.

- Do not use the appliance

- Do not drop or insert

openings in the applian

• Do not switch the appeal

where aerosols are quick

  1. Do not direct hot air to a

or part of your body set

• Notzko become hot d

them cool down before

• Avoid your hair getting

ing hair dryer operation

[Non-Text]

Keep these instruction

ence,

Switshing hair dress on

Switching half dryer on Before peitching the pool

power supply village men

of the appliance.

- Insert power cord plug

- Select operating speed

flow speed switch (1):

I = high speed;

2 = low speed;

0 = switched off.

- Select simple temperature

Heaving degree of each

1 = slight heating 2 = medium heating

3 = marine heating

  1. 有风险的处理

Taking care about your

Before drying and setting

with shampoo, dry with low

live moisture and brush to

Fast diving

Faint drying Set switrin 151 into position

(Inposition 7), select airflow

ing retich (1) and dry you

Shake off excessive moist

a brush and continuously

over your halt.

[Non-Text]

Straightening your hair

Set switch [2] into position

(position 3), select arrowing switch (i) and the up

ing launin (1) and cry you When your hair are almost

lalloo nozzle (T), refuge

by switch (2) and airflow s

Divide your hair in locks a

straightening them from

[Non-Text]

[Non-Text]

HAARTROCKNER

B. 1.2

Beschreibung

(3) please contact us

Anhebung und

Während der N,

In der Hanz-, L.

Sie den Progestu

2017年1月1日

Stylingsti

the Haire 214 x lon aoteverdio i

tängt vom Haar

Taste der Kafö

in detail mode

In the Position used Stavens

• Drücken Sie

Einzigather

Sie das Gitter

at Wieder 31.

VT-2275 Hairdryer Φen

GB A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleem-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxx means that the item was manufactured in June (the sixth month) 2006.

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vitek

Model : VT-2275 CL

Category : Hair Dryers