PF01-G - Fan Cotech - Free user manual and instructions

Product Type	Pedestal Fan
Model	PF01-G
Brand	Cotech
Blade Diameter	45 cm
Height Adjustment	120-140 cm
Base Diameter	40 cm
Weight	5 kg
Power Supply	AC 220-240V, 50Hz
Power Consumption	50 W
Speed Settings	3 (Low, Medium, High)
Oscillation	Yes, wide angle
Tilt Adjustment	Manual, up/down
Control Type	Panel buttons & remote control
Material	Plastic housing, metal stand
Noise Level	≤ 50 dB
Power Cord Length	1.5 m
Safety Features	Overheat protection, stable base
Cleaning Instructions	Unplug, wipe with damp cloth, avoid water on motor
Spare Parts Availability	Blades, guard, base, motor unit
Repairability	Basic disassembly with screwdriver
Warranty	2 years

Frequently Asked Questions - PF01-G Cotech

How do I assemble the Cotech PF01-G fan?

Unpack all parts: base, two tubes, fan head, guard, blades, and screws. Attach the base to the lower tube, insert the upper tube, then mount the fan head. Secure the back guard, attach the blade with the nut, then snap on the front guard. Tighten with the provided tool.

How do I clean the fan?

Always unplug the fan before cleaning. Use a soft, damp cloth to wipe the exterior. For the blades, remove the front guard and blade by unscrewing the nut. Clean with a damp cloth and dry thoroughly before reassembling. Do not immerse any part in water.

Does the fan come with a remote control?

Yes, the PF01-G includes a remote control for convenient operation. It requires a CR2025 battery (included). The remote allows you to adjust speed, oscillation, and timer.

Why is my fan wobbling excessively?

Ensure the base is on a flat, stable surface. Check that all screws are tightened, especially those connecting the tubes. Wobbling may also occur if the blade is bent or the guard is not properly aligned. Replace damaged parts if needed.

Can I use the fan outdoors?

This fan is designed for indoor use only. Do not expose it to rain, moisture, or direct sunlight. Using it outdoors may cause electrical shock or damage.

How do I adjust the height?

Loosen the height adjustment collar (ring) on the stand, slide the upper tube to the desired height (between 120-140 cm), then tighten the collar securely.

What is the power consumption of the fan?

The fan has a rated power consumption of 50 watts. It is energy-efficient and suitable for personal cooling.

How should I store the fan during winter?

Clean the fan thoroughly, let it dry completely. Disassemble if possible, and store in a dry, dust-free place. Use the original box or a protective cover to prevent scratches.

Is the fan quiet?

The noise level is ≤ 50 dB, which is comparable to a quiet conversation. It is suitable for use in bedrooms or offices without disturbing sleep or work.

How do I replace the fuse if the fan stops working?

The fan's plug contains a fuse. Unplug the fan, open the fuse compartment with a small screwdriver, remove the old fuse (typically 5A), and replace with a new one of the same rating. If the issue persists, contact customer service.

USER MANUAL PF01-G Cotech

Industrial Fan Heater

Byggfläkt Byggvarmer Rakennuspuhallin Bau-Heizlüfter

Illustration of a portable industrial fan or pressure vessel with control knobs and mesh grille (no text or symbols)

Art.no Model

36-7865 PF01-G

Important:

Read the entire instruction manual carefully and make sure that you fully understand it before you use the equipment. Keep the manual for future reference.

Viktig information:

This product is only suitable for well insulated spaces or occasional use.

Original instructions

Bruksanvisning i original

Originalbruksanvisning

Industrial Fan Heater 2 kW

Art.no 36-7865 Model PF01-G

Please read the entire instruction manual before using the product and then save it for future reference. We reserve the right for any errors in text or images and any necessary changes made to technical data. In the event of technical problems or other queries, please contact our Customer Services (see address details on the back).

Safety

Simple line drawing of a house with chimney (no text or symbols)

This product is intended for indoor use only.

Warning: Never cover the product. If covered, there is a risk of overheating or even fire.

Warning:

The product can become very hot during use and cause burns. Special care must be taken if the product is used in the same room as children, aged or infirm persons.

• Do not use the product without the stand fitted.
• The product must only be plugged into to an earthed 230 V, 50 Hz power outlet.
• Never use the product with a timer or other device that could automatically turn the heater on when it is unattended.
• Never use the product if it, the mains lead or plug is damaged or malfunctioning.
• Never try to open the product, repair, dismantle or modify it in any way. Repairs must only be carried out by authorised service personnel and only using genuine spare parts.
• Never immerse the product, the mains lead or plug in water or other liquid.
• Do not use the product in bathrooms or environments where it can be exposed to moisture or water.
• The product should be placed on a firm, level, heatproof surface capable of supporting its weight.
• Make sure that the product is not close to any flammable materials or objects.
• The product must never be placed directly beneath an electrical socket.
• Never use the product in rooms where flammable liquids or gases are used or stored.

• Never let children play with the product.

• The product must be kept out of reach of children under 3 years of age unless they are under constant supervision.

• Children between the ages of 3 and 8 years must only switch the product on/off provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved.
• Children between the ages of 3 and 8 years must not plug in, regulate and clean the product or perform user maintenance.

Placement

• Place the fan heater on a flat surface a safe distance away from flammable objects such as curtains and furniture.
• Be sure to place the fan heater where there is no risk of people tripping over it on its mains lead.

Buttons and functions

A. Power selector B. Thermostat knob

0

Off, the fan heater is completely switched off.

Fan only

MIN/MAX Adjustable thermostat, 0–85 °C

Fan with 1000 W heat function

Fan with 2000 W heat function

Instructions for use

△ Important

• The fan heater will become very hot during use.
• Bear in mind that factors such as the size of the room, the outside temperature and how well the building is insulated, all affect the ability of the heater to warm the room up. If the room is too large the ability of the heater to warm it up to the desired temperature may be insufficient.
• Using the highest power setting could constitute an additional load on the building's electrical system. If more than one load device (washing machine, microwave oven, kettle, etc.) is plugged into the same electrical circuit as the industrial fan heater, the extra current draw could cause the fuse/circuit breaker to trip.
• Contact a qualified electrician if you are unsure or experience problems with your circuit breaker.

• The fan heater has a PTC (Positive Temperature Coefficient) heating element that adjusts the heat output of the heater in accordance with the ambient temperature.

• Make sure that the stand is correctly fitted before switching the fan heater on.

• Plug the product into a wall socket.
• Turn the power selector to the preferred setting and turn the thermostat knob to the maximum setting.
• When the room temperature has risen to the desired level, turn the thermostat knob back until the heating element switches off (it will make a clicking sound).
• The heating element will come back on again when the temperature drops to maintain the set temperature.

Note: The fan will continue to rotate even after the heating element has switched off. The fan will only be switched off when the power selector is set to 0.

Care and maintenance

• Always disconnect the plug from the wall socket before moving or cleaning the fan heater or when it is not to be used for a long time.
• Clean the fan heater using a lightly moistened cloth. Use only mild cleaning agents, never solvents or corrosive chemicals.

Troubleshooting guide

The fan heater does not start.	Check that the power selector is not set to 0.Is the plug securely connected to the wall socket?Is the wall socket energised?
The fan rotates but gives off no heat.	The set room temperature might have been reached.Turn the thermostat knob towards the maximum setting and follow the instructions in the Instructions for use section.

Responsible disposal

This symbol indicates that the product should not be disposed of with general household waste. This applies throughout the entire EU. In order to prevent any harm to the environment or health hazards caused by incorrect waste disposal, the product must be handed in for recycling so that the material can be disposed of in a responsible manner. When recycling your product, take it to your local collection facility or contact the place of purchase. They will ensure that the product is disposed of in an environmentally sound manner.

Symbol of a trash bin crossed with no visible text or labels

Specifications

Rated voltage 230 V, 50 Hz

Power settings Fan / 1000 W / 2000 W

Overheating protection Yes

Thermostat Yes, bi-metal

PTC Yes

Mains lead 1.5 m

Weight 2 kg

Size 286 × 150 × 260 mm

Information requirements for electric local space heaters

Model identifier(s): PF01-G
Item Symbol Value Unit	Item
Heat output Type of heat input, for electric storage				local space heaters only (select one)
Nominal heat output P	nom	2.0	kW	manual heat charge control, with integrated thermostat	No
Minimum heat output (indicative)	P_min	1.0	kW	manual heat charge control with room and/or outdoor temperature feedback	No
Maximum continuous heat output	P_max,c	2.0	kW	electronic heat charge control with room and/or outdoor temperature feedback	No
Auxiliary electricity consumption	---	---	--- fan	assisted heat output No
At nominal heat output	eI_max	N/A	kW	Type of heat output/room temperature control (select one)
At minimum heat output	eI_min	N/A	kW	single stage heat output and no room temperature control	No
In standby mode el	SB	0	kW	Two or more manual stages, no room temperature control	No
				with mechanic thermostat room temperature control	Yes
				with electronic room temperature control	No
				electronic room temperature control plus day timer	No
				electronic room temperature control plus week timer	No
				Other control options (multiple selections possible)
				room temperature control, with presence detection	No
				room temperature control, with open window detection	No
				with distance control option No
				with adaptive start control No
				with working time limitation No
				with black bulb sensor No
Contact details	Clas Ohlson AB, Upper West Arcade, Unit 1113-1117, The Whitgift Shopping Centre, Croydon Surrey CR0 1UZ

Test Data

Commission Regulation (EC) No 1275/2008 Requirements

Mode Ecodesign requirements (since January 7, 2013) Result/remark Verdict
Off mode P	Power consumption in off mode:The power consumption of the product in any form of off-mode condition must not exceed 0.50 W.	0.00 W P
Standby mode	Power consumption in standby mode(s):Power consumption of the product in any condition providing only a reactivation function, or providing only a reactivation function and a mere indication of enabled reactivation function must not exceed 0.50 W.		N/A
	Power consumption of the product in any condition providing only information or status display, or providing only a combination of a reactivation function and information or status display, must not exceed 1.00 W.		N/A

Seasonal space heating energy efficiency

Description Value
Seasonal space heating energy efficiency in active mode- n_s,on	40 %
For electric local space heaters- n_th	-
The electric to primary energy “conversion coefficient”-CC	-
F(1) is a correction factor accounting for a positive contribution to the seasonal space heating energy efficiency of electric storage local space heaters due to adjusted contributions for options for heat storage and output; and a negative contribution to seasonal space heating efficiency for commercial local space heaters due to adjusted contributions for options for the heat output, expressed in %;	0.00 %
F(2) is a correction factor accounting for a positive contribution to the seasonal space heating energy efficiency due to adjusted contributions of controls of indoor heating comfort, the values of which are mutually exclusive, cannot be added to each other, expressed in %;	6.00 %
F(3) is a correction factor accounting for a positive contribution to the seasonal space heating energy efficiency due to adjusted contributions of controls for indoor heating comfort the values of which can be added to each other, expressed in %;	0.00 %
F(4) is a correction factor accounting for a negative contribution to the seasonal space heating energy efficiency by auxiliary electricity consumption, expressed in %;	0.00 %
F(5) is a correction factor accounting for a negative contribution to the seasonal space heating energy efficiency by energy consumption of a permanent pilot flame, expressed in %.	0.00 %
Seasonal space heating energy efficiency- n_s	36.00 %
Verdict	P

Byggfläkt 2 kW

Art.nr 36-7865 Modell PF01-G

Simple line drawing of a house with chimney (no text or symbols)

A. Effektvred B. Termostatvred

0

Symbol of a trash bin with no text or labels, crossed by two diagonal lines and a solid rectangle below (no text or symbols present)

Specifikationer

Simple line drawing of a house with no text or symbols

Produktet er kun beregnet til innendørs bruk.

A. Effektbryter B. Termostatbryter

0

Av, byggviften er helt avstengt.

Kun vifte

Vifte med effektinnstilling, 1000 W

Vifte med effektinnstilling, 2000 W

MIN/MAX Justerbar termostat, 0–85 °C

Bruk

△Viktig

Symbol of a trash bin with no text or labels, including a crossed-out box and a solid rectangle below (no readable text or symbols)

Spesifikasjoner

Nettilkobling 230 V, 50 Hz

Effektinnstillinger Vifte / 1000 W / 2000 W

Overopphetingsvern Ja

Termostat Ja, bimetall

PTC Ja

Strømkabel 1,5 m

Vekt 2 kg

Mål 286 × 150 × 260 mm

Simple line drawing of a house with chimney (no text or symbols)

Symbol of a trash bin with no text or labels, including a crossed-out box and a solid rectangle below (no readable text or symbols)

Tekniset tiedot

Simple line drawing of a house with chimney (no text or symbols)

Symbol of a trash bin crossed with a diagonal line, no text or numbers present

Technische Daten

10 – 13 Market Place

Kingston upon Thames

Surrey

KT1 1JZ

DEUTSCHLAND

Kundenservice Hotline: [phone]

E-Mail: [e-mail]

Homepage

www.clasohlson.de

Postanschrift