FH222E-B - Fan Cotech - Free user manual and instructions

Product Type	Fan heater
Model	FH222E-B
Brand	Cotech
Power Settings	Cool air (fan only), Warm air (1000 W), Hot air (2000 W)
Rated Voltage	230 V, 50 Hz
Thermostat	Adjustable thermostat with automatic on/off
Safety Features	Tip-over switch, overheat protection, thermal fuse
Placement Requirements	Hard, level surface; at least 1 m from combustible materials; minimum 15 cm from walls; not in rooms smaller than 4 m²
Indoor Use Only	Yes
Overheat Protection	Automatic shut-off of heating element; resets after cooling; non-resetable thermal fuse as backup
Tip-over Protection	Automatic shut-off if tipped over
Cool Air Function	Yes, by setting selector to fan symbol and thermostat to max
Recommended Room Size	Minimum 4 m²
Cleaning	Wipe with a dry or slightly damp cloth; do not immerse in water
Disposal	According to local regulations

Frequently Asked Questions - FH222E-B Cotech

How do I use the fan heater for cool air only?

Set the function selector knob to the fan symbol (cool air mode) and ensure the thermostat knob is turned to the maximum setting. The fan will then operate without heating.

Why does the fan heater turn off by itself?

The fan heater has automatic overheat protection and a tip-over switch. It may turn off if it overheats or is knocked over. Check that it is on a level surface and not blocked. If overheated, allow it to cool down; it will restart automatically.

How do I set the desired room temperature?

Turn the function selector to warm (I) or hot (II). Rotate the thermostat knob clockwise to max. When the room reaches your desired temperature, slowly turn the thermostat knob counterclockwise until you hear a click. The heater will then cycle on/off to maintain that temperature.

Can I use an extension cord with this fan heater?

No, do not use an extension cord. Connect the fan heater directly to a suitable wall outlet (230 V, 50 Hz).

What should I do if the fan heater does not start?

Check that the plug is securely connected and the outlet is live. Ensure the fan heater is on a level surface (the tip-over switch may be triggered). Also, verify the thermostat setting hasn't turned it off (see thermostat instructions).

How close can I place the fan heater to furniture or curtains?

Keep at least 1 meter away from combustible materials like furniture, curtains, bedding, and paper. Also maintain at least 15 cm clearance from walls or other objects.

Is the fan heater safe to leave unattended?

No, never leave the fan heater unattended while it is switched on. Always unplug it when not in use.

Can I use the fan heater in a bathroom?

No, do not use the fan heater near bathtubs, showers, or pools. It is for indoor domestic use only in dry areas.

How do I clean the fan heater?

Unplug the fan heater and allow it to cool. Wipe the exterior with a dry or slightly damp cloth. Never immerse it in water or allow moisture to enter the openings.

What does the thermal fuse do and can it be reset?

The thermal fuse is a safety device that permanently cuts power if overheating occurs beyond the normal protection. It cannot be reset; if it triggers, the fan heater must be discarded and replaced.

USER MANUAL FH222E-B Cotech

Read the entire instruction manual carefully and make sure that you fully understand it before you use the equipment. Keep the manual for future reference.

Viktig information:

Illustration of a portable heating unit with circular vent and heat sink (no text or symbols)

ART.NO

18-1277

36-6129

MODEL

FH222E-B UK

FH222E-B

Ver. 20150902

Original instructions

Bruksanvisning i original

Please read the entire instruction manual before using the product and then save it for future reference. We reserve the right for any errors in text or images and any necessary changes made to technical data. In the event of technical problems or other queries, please contact our Customer Services (see address details on the back).

Safety

- This fan heater is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Never let children play with the fan heater.

- The fan heater is intended for indoor use only.

- Never let children or pets touch the fan heater while it is in use. The output air can be very hot, over 80 °C (175 °F).

- Caution: Never cover the fan heater. If covered, there is a risk of overheating or even fire.

- The fan heater is only intended for normal domestic use and only in the manner described in this instruction manual.

- Never use the fan heater if it is in any way damaged or malfunctioning. Do not use the fan heater if the mains lead or plug is damaged in any way.

- Before connecting the fan heater to the mains, make sure that it is turned off and that your hands are completely dry.

- Do not use extension leads for this product. Connect it directly to a mains outlet.

- The fan heater should only be connected to a 230 V, 50 Hz electrical outlet.

- Never leave your home while the fan heater is switched on.

- The fan heater must be placed at least 1 m away from combustible materials such as furniture, cushions, bedding, paper, clothes and curtains.

- Never immerse the fan heater in water.

- Do not use the fan heater near bathtubs, showers or pools.

- Do not use the fan heater in rooms containing explosive gases, inflammable solvents, varnish, glues, etc.

- Make sure that no foreign objects enter the air intake or outlet openings. Blockages can lead to electric shock, fire or damage to the fan heater.

- The fan heater should not be taken apart or modified. Certain uninsulated components inside the housing carry dangerous voltages. Contact with these can lead to fire or electric shock.

- Always unplug the fan heater from the power point when it is not in use. Always grip the plug when unplugging, never pull the mains lead.

- The fan heater must always be standing upright while in use.

• Never use the fan heater for drying clothing. Never cover its air inlets or outlets.
• The mains lead must be changed if damaged. This is to prevent the risk of electric shock or fire and should only be carried out by the manufacturer, qualified service facility or qualified technician.
• The fan heater must not be placed directly below a wall socket.
• Do not use the fan heater in a room smaller than 4m^2

Buttons and functions

1. Thermostat knob
2. Indicator light
3. Function selector
4. Tip-over switch

Function selector settings

0 Off

Cool air

I Warm air (1000 W)

II Hot air (2000 W)

Operating instructions

Placement

• Place the fan heater on a hard and level surface.
• Never place the fan heater on soft surfaces such as beds, blankets, thick rugs, etc.
• Do not place the fan heater in the bathroom, laundry room, or in the near vicinity of the bath or shower.
• Do not use the fan heater in damp or dusty environments.
• Place the fan heater some distance from furniture, curtains or other easily flammable objects. Make sure that fan heater is at least 15 cm from walls or any other objects.

Warm air setting

The function selector set to setting I or II:

1. Turn the thermostat control clockwise to the maximum setting.
2. When the room has reached the desired temperature, slowly turn the thermostat control until it clicks. The heater and indicator light will turn off.
3. No further adjustment is required. The fan heater will then automatically turn on once the temperature goes below the setting and turn off once the set temperature is reached.

Cool air setting

The fan heater can also be used to provide cool air by setting the function selector knob to ✦Note: In order for this to work, the thermostat knob must be set to max.

Tip-over switch

The tip-over switch is located on the bottom of the fan heater and will shut it off automatically should it tip over.

Overheating protection

The fan heater has a built-in thermal over-temperature protection device. If the over-temperature protection is triggered, the heating element is automatically shut off. When the over-temperature protection device has cooled down, the heating element will be reconnected and the fan heater will work again as normal.

As an extra safety measure the heater is also fitted with a thermal fuse safety cut-off. This thermal fuse cannot be reset, so if it has blown the fan heater cannot be reused. The fan heater should then be discarded.

Troubleshooting guide

The fan heater does not start.

The tip-over protection can be tripped if the fan heater sits on an uneven surface. Make sure the fan heater is level.Is the plug securely connected to the wall socket?Check that the wall socket is live.Has the thermostat tripped and turned off the fan heater? See the Warm air setting section above.

Disposal

This product should be disposed of in accordance with local regulations. If you are unsure how to proceed, contact your local authority.

Specifications

Rated voltage 230 V, 50 Hz

Power setting I 1000 W

Power setting II 2000 W

Värmefläkt

ART.NR 18-1277 MODELL FH222E-B UK

36-6129

FH222E-B

POSTAL 10 – 13 Market Place

Kingston Upon Thames

Surrey

KT1 1JZ

DEUTSCHLAND