YD619 - Blender Coline - Free user manual and instructions

Brand	Coline
Model	YD619
Product Type	Cordless Hand Blender
Art. No.	34-1563-1
Power Source	Rechargeable Li-ion battery (7.2 V, 2150 mAh)
Charging Time	Approximately 3 hours
Operating Time	Approximately 10 minutes
Motor Unit	Detachable with safety catch and release button
Mixing Stem	Includes sharp stainless steel blade
Charging Stand	Included for storage and charging
Charger	Included, for indoor use only
Control	On/off switch with safety catch
Indicator Lamp	Red: flashes during charging, steady when fully charged; on when blending
Safety Features	Safety catch prevents accidental start; max 1 minute continuous use with 1 minute cool down
Blade Material	Stainless steel
Housing Material	Plastic
Cleaning	Detachable mixing stem: rinse under warm water; motor unit: wipe with damp cloth
Storage	Store assembled on charging stand
Included Accessories	Mixing stem, charger, charging stand
Suitable For	Blending soft foods and liquids; not for hard/dry substances
Languages	English, Swedish, Norwegian, Finnish, German
Voltage	Refer to rating plate (charger input)

Frequently Asked Questions - YD619 Coline

How long does it take to fully charge the YD619 blender?

The charging time is approximately 3 hours. The indicator lamp flashes during charging and stays steady when fully charged.

How long can I use the blender on a single charge?

Operating time is approximately 10 minutes on a full charge.

Can I use the blender continuously for more than one minute?

No. The manual states: Never use the hand blender for longer than 1 minute at a time. Let the motor cool for 1 minute before using again.

How should I clean the blender?

Press the release catch to detach the mixing stem. Rinse the blade and stem under lukewarm running water and wipe dry. Wipe the motor unit with a soft, damp cloth. Do not immerse motor unit, charger, or charging stand in water.

Is it safe to blend hot liquids?

Yes, but with caution: use a tall vessel, blend in small amounts, and do it several times to minimize spills and splashes.

What does the red indicator lamp mean?

If the red lamp comes on while blending, the battery needs charging. Place the blender in the charging stand. The lamp flashes during charging and stays steady when fully charged.

Can I blend hard foods like ice or nuts?

No. The blender is not designed for hard and dry substances. Using it on such foods may damage the blade.

How do I assemble the blender correctly?

Align the arrows (▼▲) on the mixing stem and motor unit. Twist to lock. Check that the release catch is secured by pulling the stem slightly.

What type of battery does the YD619 use?

It uses a Li-ion battery (7.2 V, 2150 mAh). The battery is protected against deep discharge.

How should I store the blender when not in use?

Clean the blender, assemble it, and place it in the charging stand. Charge the battery, then disconnect the charger from the power point.

USER MANUAL YD619 Coline

Cordless Hand Blender

Laddbar stavmixer • Oppladbar stavmikser Ladattava sauvasekoitin • Akku-Stabmixer

Technical line drawing of a mechanical device with a conical top and base (no text or symbols)

Art. No.: Model. No:

34-1563-1

YD619

English 3

Svenska 7

Norsk 11

Suomi 15

Deutsch 19

Cordless Hand Blender

Art.no 34-1563-1 Model YD619

Please read the entire instruction manual before using the product and then save it for future reference. We reserve the right for any errors in text or images and any necessary changes made to technical data. If you have any questions concerning technical problems please contact our Customer Services.

Safety

• Never use the hand blender for longer than 1 minute at a time. Switch the hand blender off and let the motor cool down for a minute before using it again.
• Incorrect use of the hand blender could result in personal injury.
• Great care should be exercised when handling and cleaning the blade and the mixing stem. The blade is very sharp.
• The hand blender should always be disconnected from the mains when it is not in use, when it is to be assembled/disassembled and when it is to be cleaned.
• The hand blender must not be used by children. Ensure that the hand blender and its mains lead are kept out of children's reach.
• The hand blender must only be used together with the included charger and charging stand.
• Note: Ensure that the hand blender is switched off before the mixing stem is removed from the motor unit.
• Wash the mixing stem, blade and any other accessories with warm soapy water.
• Switch the hand blender off and remove the mixing stem from the motor unit before changing accessories or handling any of the moving parts.
• The hand blender may be used by persons with reduced physical, sensory or mental capability, lack of experience or knowledge which could jeopardise their safety, provided they have been instructed in the safe use of the hand blender and understand the hazards involved. Never let children play with the hand blender.
• Ensure that the hand blender is used with the correct voltage. Refer to the hand blender's rating plate.
• Always remove the mixing stem from the motor unit before cleaning. The blade is extremely sharp and could cause serious personal injury if the hand blender were to start accidentally.
• To prevent electric shocks, the hand blender, its charger and charger cable should always be kept dry.
• Never lay the charger cable over hot surfaces, sharp edges or corners.
• Always disconnect the charger from the power supply by holding and pulling the charger plug. Do not pull the cable.
• Make sure that the parts of the hand blender are correctly assembled and that the hand blender is switched off before connecting it to the charger.

• Only use the hand blender for blending, never start the motor when the blender is not in contact with the food to be blended.

• Never use the hand blender close to heat sources.

• Only use the included accessories. The use of non-recommended accessories may result in fire, electric shock or personal injury.
• Never use the hand blender for anything other than its intended use.
• To prevent the risk of electrocution, make sure that the motor unit, charger or charging stand are never immersed in water or other liquid.
• The hand blender is battery-powered which means that the mixing stem must be detached from the motor unit to ensure that the blade cannot rotate.
• Never use the hand blender if it, the charger cable or charging stand is damaged.
• Keep a close watch on children and disabled persons in the vicinity of the hand blender when it in use.
• Make sure that all fingers are kept away from the blade.
• When blending liquids, especially hot liquids, do as follows: use the hand blender in a tall vessel and blend in small amounts, several times to minimise the risk of spills and splashes.
• Use only the charger supplied with the hand blender. The charger is for indoor use only.
• The hand blender must not be used for blending hard and dry substances, the blade could be damaged.
• The hand blender contains a rechargeable battery which must be recycled in an environmentally friendly way.
• This hand blender is only intended for normal household use.
• Never dismantle the rechargeable battery or the charger.
• Make sure that the rechargeable battery does not short-circuit; it may damage the battery and lead to personal injury if the battery explodes.
• The battery can explode if it is exposed to fire or high temperature. Never throw the battery into a fire. Never expose the battery to strong sunlight.

Before initial use

Remove all packaging material and clean the blade (refer to the Cleaning section).

Disposal

The hand blender should be disposed of in accordance with local regulations. If you are unsure how to proceed, contact your local council.

Specifications

Charging time 3 hours

Battery Li-ion, 7.2 V, 2150 mAh

Operating time Approx. 10 min

Description

1. Indicator lamp
2. Safety catch - must be pressed in before [Start
3. [⏻] Start (power switch)
4. Motor unit
5. Mixing stem release catch
6. Mixing stem with blade
7. Charger
8. Charging stand

Operating instructions

The battery must be charged before initial use. The battery is uncharged when sold.

Note: Remember that the blade is very sharp.

Blending

1. Fit the mixing stem (6) onto the motor unit (4). The mixing stem and motor unit have markings (▼▲), twist the parts to align the two arrows. Check that the motor unit release catch (5) is locked by pulling the mixing stem a little.
2. Chop the ingredients up into small pieces before putting them in the blending vessel. Bear in mind that the choice of vessel is important, select a vessel that is tall and narrow for blending fruit. Always hold the hand blender vertical to avoid unnecessary spills.
3. Hold the mixing stem against the bottom of the vessel and press in the safety catch (2). Then hold in [⏻] (3) to switch the hand blender on. The indicator lamp will light when the hand blender is on.
4. Release [⏻] (3) to switch the hand blender off.
5. Never use the hand blender for longer than 1 minute at a time. Switch the hand blender off and let the motor cool down for about 1 minute before using it again.
6. Clean the hand blender and place it back in the charging stand (refer to the Cleaning section).

Note: The hand blender must not be run with no load for more than 15 seconds at a time. Otherwise the guarantee will be void.

Charging

1. If the red indicator lamp (1) comes on, the hand blender needs charging.
2. Place the hand blender in the charging stand (8). The blender can be charged with or without the mixing stem attached.
3. The indicator lamp (1) will flash whilst charging is in progress, it will shine steadily once the blender has been charged.
4. Unplug the battery charger from the power point once the charging has been completed.

Line drawing of a mechanical device with a vertical support and connected plug (no text or symbols)

Note: The battery is protected against deep discharge. A fully discharged battery must be charged for at least 15 minutes before the hand blender can be used again.

If you do not intend to use the hand blender for a while you should ensure that the battery is not completely discharged. The battery can be damaged if it remains discharged for an extended period.

Cleaning

1. Press in the release catch (5) and detach the mixing stem before cleaning.
2. Rinse the blade and mixing stem in lukewarm running water and then wipe dry. The blade is very sharp and should be handled with extreme care.
3. Wipe the motor unit (4) with a soft, moist cloth. If necessary, use a mild detergent. Never use solvents or strong, abrasive cleaning agents for cleaning as these can damage the hand blender.
4. Assemble the hand blender and place it in the charging stand where it be stored until it is needed again. Charge the battery and then disconnect the charger from the power point.

Note: Neither the motor unit, nor the charger nor the charging stand are to be immersed in water or other liquid.

Laddbar stavmixer

Art.nr 34-1563-1 Modell YD619

Technical line drawing of a handheld device with a separate plug and cable (no text or symbols)

Rengöring

1. Indikatorlampe
2. Sikkerhetssperre, må trykkes inn før [ ∅Start
3. [Start/Strømbryter
4. Motordel
5. Sperre for mikserfoten
6. Mikserfot med knivblad
7. Lader
8. Ladestativ

Bruk

Line drawing of a handheld device with a power plug and cable, no text or symbols present

Rengjøring

Line drawing of a handheld device with a power outlet connected to a stand (no text or symbols)

Puhdistaminen

Line drawing of a handheld device with a power outlet connected to a stand (no text or symbols)

Reinigung

10 - 13 Market Place

Kingston Upon Thames

Surrey

KT1 1JZ

DEUTSCHLAND

KUNDENSERVICE