40-7818-1 - Uncategorized Cocraft - Free user manual and instructions

Product Type	Tool Chest
Brand	Cocraft
Model	40-7818-1
Number of Drawers	7
Locking Mechanism	Central locking with key
Dimensions (W x D x H)	69 x 46 x 85 cm
Maximum Load per Drawer	22.5 kg
Maximum Total Load	450 kg
Wheels Included	4 (2 swivel casters with brakes, 2 fixed)
Handle	Side handle for pushing
Assembly Required	Yes
Care Instructions	Polish with car wax; clean with mild detergent; lubricate drawer slides and wheels with grease, lock with oil
Safety Features	Brakes on swivel casters; lockable drawers; warning against opening multiple drawers at once
Material	Steel
Color	Not specified
Disposal	Recycle according to local regulations

Frequently Asked Questions - 40-7818-1 Cocraft

How do I assemble the casters and handle?

Attach the handle with included bolts. Fix the wheels to the base, ensuring the swivel casters are on the same side as the handle. Tighten bolts properly but do not overtighten.

What is the maximum weight per drawer?

Each drawer should not exceed 22.5 kg.

How do I lock the cabinet?

Close all drawers fully, push them to the back, turn the key, and check that all drawers are locked.

How do I remove a drawer?

Empty the drawer, slide it all the way out, press the left plastic tab up and right tab down, then pull the drawer out. To insert, slot it into the slide and push it all the way in.

Can I use the cabinet on uneven floors?

No, do not use the cabinet on uneven floors or gradients as it might tip over or start moving.

How should I clean and maintain the cabinet?

Polish paintwork with car wax. Clean with a soft cloth and mild detergent. Never use solvents or flammable liquids. Regularly lubricate drawer slides and wheels with grease, and the lock with oil.

What should I do if the cabinet tips?

Prevent tipping by only opening one drawer at a time, using brakes, and not hanging heavy items on the cabinet. If it tips, ensure no one is injured and secure the cabinet.

Are the wheels lockable?

Yes, two of the four wheels are swivel casters with brakes. Always use the brakes when the cabinet is stationary.

Can I open multiple drawers at once?

No, only open one drawer at a time to prevent the cabinet from tipping over.

How do I dispose of the cabinet responsibly?

Do not dispose with household waste. Take it to a local collection facility or contact the place of purchase for environmentally sound recycling.

USER MANUAL 40-7818-1 Cocraft

TOOL CHEST 7 DRAWERS

VERKTYGSSKÅP TYÖKALUKAAPPI

VERKT∅YSKAP WERKZEUGSCHRANK

Important:

Read the entire instruction manual carefully and make sure that you fully understand it before you use the equipment. Keep the manual for future reference.

Viktig information:

Original instructions

Bruksanvisning i original

Originalbruksanvisning

Please read the entire instruction manual before using the product and save it for future reference. We reserve the right for any errors in text or images and any necessary changes made to technical data. If you have any questions regarding technical problems please contact Customer Services.

Safety

• Do not use the side handles to lift the cabinet using rope, chains or similar. If the cabinet is too heavy to lift by hand, use a pallet truck/fork lift and lift the cabinet from below.
• Do not drag the cabinet around by the handle; push it in front of you.
  • The swivel castors and the handle must be fitted on the same side.
  • Always use the brakes when the cabinet is stationary.
• Only open one drawer at a time, heavy drawers can tip the cabinet over.
• Do not hang heavy items on the cabinet; doing so could make it instable.
• Do not fasten the cabinet to moveable objects or vehicles.
• Do not tow the cabinet behind vehicles or other moveable objects, it can tip over.
• Do not stand on the open drawers or on top of the cabinet.
  • The total weight contained in a drawer should not exceed 22.5 kg.
  • The total weight of the entire cabinet and contents must not exceed 450 kg.
• Do not use the cabinet on uneven floors or gradients, it might tip over or start moving.

Product description

Tool cabinet with 4 wheels (two with brakes) and 7 lockable drawers.

Size: 69 × 46 × 85 cm (w × d × h).

Assembly Side handle

Attach the handle with the included bolts. Tighten the bolts properly, but do not overtighten them.

Technical line drawing of a mechanical bracket with mounting holes and a lever handle (no text or symbols)

Wheels

The wheels and bolts are in the bottom drawer.

Check the contents:

• 4 wheels; 2 swivel castors with brakes and 2 fixed without brakes.
- 16 bolts

Fix the wheels to the base making sure that the swivel wheels are on the same side as the handle.

Tighten the bolts properly, but do not overtighten them.

Technical line drawing of a mechanical assembly with a wheel and mounting base (no text or symbols)

Removing and inserting drawers

1. Empty the drawer that is to be removed.

2. Slide it all the way out.

3. Press the left side plastic tab up and the right side tab down and hold them there whilst pulling the drawer out.

4. Insert the drawer by slotting it into the drawer slide and pushing it all the way in.

Line drawing of a hand using a tool to adjust or install a mechanical component (no text or symbols present)

Locking

1. Close all the drawers.

2. There is a little resistance in the drawers when they are all the way in. Push the drawers in so that they are all right the way to the back of the cabinet.

3. Turn the key.

4. Check that all the drawers are locked.

Care and maintenance

• Polish the paintwork with car wax to protect it from wear and tear.
• Clean the cabinet using a clean soft cloth and a little detergent. Never clean the product using solvents or flammable liquids.
• Regularly lubricate the drawer slides and wheels with grease and the lock with oil.

Responsible disposal

This symbol indicates that this product should not be disposed of with general household waste. This applies throughout the entire EU. In order to prevent any harm to the environment or health hazards caused by incorrect waste disposal, the product must be handed in for recycling so that the material can be disposed of in a responsible manner. When recycling your product, take it to your local collection facility or contact the place of purchase. They will ensure that the product is disposed of in an environmentally sound manner.

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

Verktygsskåp

Art.nr 40-7818-1

Technical line drawing of a mechanical bracket with mounting holes and a handle (no text or symbols)

Hjul

Technical line drawing of a mechanical device with a wheel and mounting base (no text or symbols)

Line drawing of a hand using a tool to cut or install a rectangular object, no text or symbols present

Låsning

Symbol of a trash bin crossed with no text or labels, accompanied by a black rectangular block below (no readable text or symbols)

Verktøyskap

Art.nr. 40-7818-1

Technical line drawing of a mechanical bracket with mounting holes and a handle (no text or symbols)

Hjul

Hjul og bolter ligger i nederste skuff. Kontroller at delene ligger i skuffen.

Technical line drawing of a mechanical device with a wheel and mounting base (no text or symbols)

Line drawing of a hand using a tool to press or install a rectangular object, no text or symbols present

Låsing

1. Lukk alle skuffene.
2. Det er litt motstand i skuffene når de er lengst inne. Trykk alle skuffene inn helt til de når bunnen.
3. Vri om nøkkelen.
4. Kontroller at alle skuffene er låst.

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

Työkalukaappi

Tuotenro 40-7818-1

Technical line drawing of a mechanical bracket with mounting holes and a handle (no text or symbols)

Pyörät

Technical line drawing of a mechanical device with a wheel and mounting base (no text or symbols)

Line drawing of a hand using a tool to cut or install a rectangular object, no text or symbols present

Lukitus

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

Werkzeugschrank

Art.Nr. 40-7818-1

Technical line drawing of a mechanical bracket with mounting holes and a handle (no text or symbols)

Räder

Technical line drawing of a mechanical assembly with a pulley and mounting base (no text or symbols)

Line drawing of a hand using a tool to cut or install a mechanical component (no text or symbols)

Verschließen

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

Sverige

Postal 10 - 13 Market Place

Kingston upon Thames

Surrey

KT1 1JZ

Deutschland

Kundenservice Hotline: [phone]

E-Mail: [e-mail]

Homepage

www.clasohlson.de