Spectrix S40G - SSD XPG - Free user manual and instructions
Find the device manual for free Spectrix S40G XPG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280 |
| Interface | PCIe 3.0 x4, NVMe 1.3 |
| Capacity | 512GB, 1TB, 2TB |
| Sequential Read Speed | Up to 3500 MB/s |
| Sequential Write Speed | Up to 3000 MB/s |
| Random Read IOPS | Up to 440K (4K QD32) |
| Random Write IOPS | Up to 380K (4K QD32) |
| Controller | Realtek RTS5762 |
| NAND Flash Type | 3D TLC NAND |
| DRAM Cache | Yes (DDR3/DDR4) |
| RGB Lighting | Yes (addressable RGB via XPG RGB app) |
| Dimensions (L x W x H) | 80 x 22 x 6 mm |
| Weight | 8 g |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| Power Consumption (Active) | 6.5W typical |
| Power Consumption (Idle) | 0.33W (PS3), 0.04W (PS4) |
| Warranty | Limited 5-year warranty |
| Additional Features | SLC caching, TRIM, SMART, ECC, Over-provisioning |
Frequently Asked Questions - Spectrix S40G XPG
What is the form factor of the XPG Spectrix S40G?
The XPG Spectrix S40G uses the M.2 2280 form factor, which is a standard size for NVMe SSDs.
Does the Spectrix S40G support RGB lighting?
Yes, it features addressable RGB lighting that can be customized using the XPG RGB app, compatible with major motherboard RGB ecosystems.
What interface does the S40G use?
It uses a PCIe 3.0 x4 interface with NVMe 1.3 protocol, offering high bandwidth for fast data transfers.
What are the maximum sequential read and write speeds?
Sequential read speeds can reach up to 3500 MB/s, and sequential write speeds up to 3000 MB/s, depending on capacity and system configuration.
Is the S40G compatible with PlayStation 5 or Xbox?
The S40G is an M.2 NVMe SSD. For PS5, it requires a heatsink for use in the expansion slot; check Sony's compatibility list. It works as external storage on Xbox via USB adapter.
Does it have a DRAM cache?
Yes, it includes a DRAM cache (DDR3/DDR4) which helps improve random read/write performance and overall responsiveness.
How do I install the Spectrix S40G?
Install it into an M.2 slot on your motherboard (PCIe 3.0 or higher). Secure with the mounting screw. For RGB, connect an optional RGB header or use the supplied cable (if included) and install XPG RGB software.
What is the warranty period?
The XPG Spectrix S40G comes with a limited 5-year warranty, but the warranty may be based on product lifetime or TBW (Terabytes Written), whichever comes first.
What NAND flash type is used?
It uses 3D TLC (Triple-Level Cell) NAND flash memory, which offers a good balance of performance, endurance, and cost.
Can I use the S40G in a desktop and laptop?
Yes, as long as your device has an M.2 slot supporting PCIe 3.0 or higher. Some laptops may require a single-sided M.2 SSD; the S40G is single-sided, so it fits most laptops.
User questions about Spectrix S40G XPG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your SSD in PDF format for free! Find your manual Spectrix S40G - XPG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Spectrix S40G by XPG.