IAN 96793 - Tent CRIVIT - Free user manual and instructions

Product type	Pop-up beach tent
Brand	Crivit
Model	IAN 96793
Set-up dimensions	approx. 200 cm (L) x 120 cm (W) x 90 cm (H)
Folded dimensions	approx. 62 cm diameter x 2.5 cm
Weight	approx. 1000 g
Canopy material	Polyester
Frame	Automatic fiberglass pop-up
Capacity	2 to 3 persons
Included accessories	10 stakes, 2 guy lines, carry bag
Number of stakes	10
Number of guy lines	2
Length of guy lines	approx. 200 cm
Stake size	approx. 18 cm x 4 mm
Intended use	Wind and sun shelter, non-professional use
Water resistance	Not waterproof, for dry weather only
Assembly	Pop-up: toss in air, no tools required
Disassembly	Fold as per diagram, store in bag
Ventilation openings	Present, must remain open during use
Care	Brush, clean with clear water, not machine washable
Repair	Holes and tears repairable with identical material; guy lines not repairable
Warranty	3 years

Frequently Asked Questions - IAN 96793 CRIVIT

How to set up the Crivit IAN 96793 tent?

Toss the tent up in the air in front of you. Make sure the entrance is not facing the wind. Secure the stakes by driving them obliquely into the ground for better hold. No tools required.

How to disassemble the tent?

Gather the right and left arches (figure 1). Place the tent vertically, then lower the top arch (C) downwards by tapping with your right hand (B). Slide the rings onto each other and store in the bag. Ensure it is dry and clean to prevent mold.

Can I use this tent in the rain?

No, this beach tent is not waterproof. It is designed to protect from wind and sun. Prolonged exposure to rain may damage the material.

How to clean the tent?

Brush off impurities. Use clear water for light soiling. For stubborn stains, apply a special tent cleaner. Do not machine wash and do not use chemical cleaning.

How to store the tent after use?

Make sure the tent is dry and clean to prevent mold and punctures. Store all cleaned accessories in the carry bag. Close the zipper carefully. Store in a cool, dry, well-ventilated place.

What is the warranty period?

The warranty is 3 years from the date of purchase. Keep the receipt as proof. The warranty covers material and manufacturing defects, but not normal wear or damage from improper use.

Does the tent protect from UV?

The manual mentions that all tent fabrics undergo material fatigue with prolonged sun exposure and fade. There is no specific UV protection indicated. It is recommended to avoid prolonged exposure.

What to do if the tent is damaged (hole, tear)?

Holes and tears can be patched with identical material (e.g., a fabric patch). Guy lines are not repairable. For other repairs, contact customer service.

How many people can use this tent?

With dimensions of 200 cm x 120 cm x 90 cm, the tent can comfortably accommodate 2 to 3 persons sitting or lying down. It is ideal for beach use.

Is the tent suitable for camping?

No, this tent is designed as a beach shelter for wind and sun. It is not waterproof and does not offer the necessary protection for camping. Use it only in dry conditions.

USER MANUAL IAN 96793 CRIVIT

POP-UP-STRANDMUSCHEL

DE AT CH

POP-UP-STRANDMUSCHEL

Operation and Safety Notes

FR CH

TENTE DE PLAGE POP-UP

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

GB Operation and Safety Notes Page 17

Three grayscale images of a tent with open and closed sections, showing different shapes and sizes (no text or symbols)

Three black-and-white photos showing a person handling a large canopy cover, another holding a small canopy cover, and a third holding a matching canopy cover (no text or symbols visible)

[e-mail]

IAN 96793

Tente de plage Pop-up

- Introduction

- Fabricant / Service

Simex Outdoor International GmbH

Schiefbahner Straße 12

41748 Viersen

Allemagne

[e-mail]

IAN 96793

[e-mail]

IAN 96793

Pop-up strandtentje

- Inleiding

[e-mail]

IAN 96793

Pop-Up Beach Shelter

- Introduction

Congratulations! You have purchased a high-quality product. The instructions for use are to be considered as part of this product. They contain important instructions for use. Please read all the information carefully before use. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intendeduse

This product is intended for use as protection against the wind and sun. The material of the beach tent is not permanently waterproof. Therefore, it should not be used in rain. The product is not intended for commercial use.

- Scope of delivery

1 Pop-Up Beach Shelter
1 Carry and storage bag
10Tentpegs
2 Guy ropes
1 Set of instructions for use

- Parts description

Guy rope (approx. 200 cm)

Tent pegs (approx. 18 cm x 4 mm)

- Technical Data

Measurements

(assembled): approx. 200 cm (L) x 120 cm (W) x 90 cm (H)

Weight: approx. 1000 g

Packed size: approx. 62 cm diameter x 2.5 cm

Safety notes

KEEP THESE INSTRUCTIONS IN A SAFE PLACE. WHEN PASSING THIS PRODUCT ON TO OTHERS, PLEASE INCLUDE ALL THE DOCUMENTS. DO NOT REMOVE ANY SEWN-IN LABELS.

● Safety precautions for fire and ventilation

CAUTION:

■ Additional ventilation is required when using gas or other burners.
Do not place a hot appliance near to the walls, ceiling or curtains.
■ Always observe the safety notices for this product.
■ Never allow children to play in the vicinity of hot appliances.
- Keep the exits clear.
■ Ensure you know the fire precautions of the site.
■ Ensure that the ventilation openings are always open, in order to prevent suffocation.

- Assembly / Before use

Assembly is not necessary because the article is pre-assembled, with the exception of the guy ropes.

Use

Warning:

Please ensure that the poles are under tension and that the beach tent always springs into its natural shape. Ensure that the tensioning force does not cause you injury.

- Selecting a set-up location

☐ Preferentially choose a flat clean set-up area.
☐ Remove stones and similar objects, to prevent damage to the floor.

Take the beach tent out of the bag. Ensure that the poles are under tension and that the tent springs into its natural shape. Ensure that the tensioning force does not cause you injury.

Figure 2: Stand the beach tent upright. Push the upper arch (C) downwards with the left hand and fold it in towards the centre (B) using your left hand.

Figure 3: Push the rings into each other and pack the beach tent into the carry and storage bag.

- Assembling the beach tent

☐ Throw the beach tent away from you into the air. The entrance should not face into the wind if possible.

When securing, in order to achieve better steadiness, ensure that the tent pegs are inserted into the ground at an angle but without tension. The material and the anchor points should only be under light tension.

● Special problems/Particular environmental conditions

UV rays – all the tent materials suffer material fatigue under strong sunlight and bleach to a certain extent. During bad weather conditions (storm), it is recommended that the beach tent is dismantled.

- Dismantling the beach tent

Please watch the tent dismantling information video, by using the QR-code with a suitable appliance.

Attention: Please ensure that the poles are under tension and that the beach tent always springs into its natural shape. Ensure that the tensioning force does not cause you injury.

For dismantling, please follow the descriptions given with Figures 1–3.

To prevent the formation of mould or mildew stains, always dismantle the beach tent in a clean and dry condition.

Figure 1: Hold all the left and right arches together.

- Packing

☐ Pack the cleaned accessories into the storage bag supplied.
☐ Lie the beach tent in the carry and storage bag and carefully close the zipper.
Keep the article in a cool, dry and well-ventilated place away from frost. Avoid packaging and storage in a damp condition, (formation of mould, mildew).

● Maintenance/Cleaning and repair

Brush off dirt. Use clean water if necessary. For stubborn stains, only use commercially available tent care products. Please never wash in a washing machine or dry-clean! Holes or tears can also be glued using the same material. The poles do not require specific maintenance, other than being stored dry and clean in the storage bag. The poles of this product cannot be repaired.

● Environmental instructions and disposal information

Contact your local authorities for information on how to dispose of the product at the end of product life.

Warranty

This tool has a warranty of 3 years from the date of purchase. The product has been manufactured with care and thoroughly inspected before delivery. Please keep your receipt as proof of purchase. In the event of a warranty claim, please contact our service

department by telephone. This will ensure you will be able to return your produce postage-free.

The warranty covers only claims for material and manufacturing defects, not transport damage, wearing items or damage to fragile components, e.g. buttons or batteries.

This product is intended for private, non-commercial use only.

Any incorrect or improper use of the device, use of force and changes not performed by our authorized service branch will void the warranty. This warranty does not limit your legal rights.

The warranty period will not be extended by repairs made under warranty. This also applies to replaced and repaired parts. Any damage and defects present at the time of purchase must be reported immediately after unpacking the device, but no later than two days after the date of purchase. Repairs made after expiration of warranty are subject to a fee.

● Manufacturer / Service

Simex Outdoor International GmbH

Schiefbahner Straße 12

41748 Viersen

Germany

[e-mail]

IAN 96793

Simex Outdoor International GmbH

Schiefbahner Straße 12

41748 Viersen

Deutschland