IAN 272277 - Motorcycle helmet CRIVIT - Free user manual and instructions

Product Type	Flip-up helmet (modular full-face)
Brand	CRIVIT
Model	IAN 272277 (sizes M, L, XL)
Homologation	ECE-R 22.05
Outer Shell Material	High Density Copolymer Matrix (HCM) ABS plastic
Inner Lining	Removable, washable with Coolmax® and HeiQ® Pure dynamiq
Visor	Anti-scratch and anti-fog coated, type DS-MULTIX301
Sun Shield	Integrated, retractable with safety latch mechanism
Ventilation	Adjustable top vent and front vent, breath deflector
Chin Strap	Snap-fastener system with movable buckle
Cheek Pads	Two pairs (thin and thick) for individual fit
Acoustic Damping	Included for noise reduction
Winter Collar	Interchangeable with standard collar
Size Range	M (57-58 cm), L (59-60 cm), XL (61 cm)
Cleaning	pH-neutral detergent; hand wash lining below 30°C
Warranty	3 years from date of purchase
Included Accessories	Additional cheek pads, replacement visor, acoustic damping, winter collar, helmet bag
Important Safety Note	Must be replaced after any impact; do not modify

Frequently Asked Questions - IAN 272277 CRIVIT

What size should I choose for my CRIVIT motorcycle helmet IAN 272277?

Measure the circumference of your head and select based on the size table: M (57-58 cm), L (59-60 cm), XL (61 cm). The helmet should fit snugly without the chin strap secured, and your temple skin should move with it.

How do I clean the visor and outer shell?

Use a pH-neutral detergent dissolved in clean water. Gently rub with a soft cloth and wipe dry with a lint-free cloth. Never use petroleum-based solvents or abrasives. For the visor, wipe off grime with a soft cloth; when wet, dry with a soft cloth.

Can I replace the visor myself?

Yes, the visor is designed for tool-less replacement. Fully open the visor, pull the visor-locking lever to remove it, and snap in the replacement visor (type DS-MULTIX301). Ensure correct positioning.

How do I use the integrated sun shield?

The sun shield (8) is operated via slider (4) after pressing the safety latch. It can be retracted or extended only when the visor is closed. Use solely during daytime.

Is the inner lining removable and washable?

Yes, the inner lining (13) is completely removable. Hand wash below 30°C and let it dry at room temperature. Avoid sources of heat. The cheek pads and acoustic pads are also hand washable.

What does the 3-year warranty cover?

The warranty covers material and workmanship defects from the date of purchase. It does not cover misuse or improper handling. Retain your receipt and contact the service hotline for claims.

How do I adjust the fit using the cheek pads?

The helmet comes with pre-installed thin cheek pads. If the helmet is too loose, replace them with the thicker pair by unclipping the three press-studs and snapping in the thicker pads. Ensure each stud clicks.

Can I use the helmet after an accident?

No. The helmet is designed to absorb impact energy by destroying some components. After any hard blow, it must be replaced even if no external damage is visible. This is critical for your safety.

How do I attach the winter collar?

First remove the standard collar by pulling it out. Then insert the winter collar by attaching the plastic clip in the groove at the back of the helmet, and press the collar firmly onto the padding.

Where can I find replacement parts like visors?

Replacement visors (type DS-MULTIX301) and other genuine parts are available from the service address: Delta Sport Handelskontor GmbH. You may also purchase via www.delta-sport.info. Contact the service hotline or email [e-mail].

USER MANUAL IAN 272277 CRIVIT

Front view of a black semi-travel helmet with clear visor and transparent dome (no text or symbols visible)

FLIP-UP HELMET

DELTA SPORT HANDELSKONTOR GMBH

Wangarp b

B-22397 Hamburg

Vans: 01/2016

Delta-SportN.: DS-VULTI-002

GB

FLIP-UP HELMET

Instructions for use

DE AT CH

KLAPPHELM

Bedienungsanleitung

GB

Before reading, fold out the illustration page and get to know all of the functions of your unit.

DE AT CH

GB Instructions for use 5

Medical illustration showing a skull with an arrow indicating rotation (no text or labels)

GB

Instructions for use

Parts Overview 6

Scope of Delivery 6

Important Information 6

Instructions for Use

Safety Advice 6-7

Product Characteristics....7-8

Use and Installation Instructions

Inner Lining 9

Chin-Wind Deflector....9

Snap-Fastener System 9

Sun Shield....9

Cheek Pads 9

Acoustic Damping 9

Front Vent 9

Top Vent 9

Winter Collar 10

Visor Replacement 10

Selecting the Correct Helmet Size 10

Maintenance and Care....10 - 11

Storage 11

Disposal Instructions 11

3 Years Warranty 11

Congratulations!

With your purchase you have decided on a high-quality product. Get to know the product before you start to use it. Carefully read the following operating instructions. Use the product only as described and only for the given areas of application. Keep these instructions safe. When passing the product on to a third party, always make sure that the documentation is included.

Parts Overview

1 Top vent
2 Air exhaust
3 Visor mechanism
4 Slider for sun shield with safety latch
5 Front vent
6 Breath deflector
7 Visor
8 Sun shield
9 Pivoted release
10 Chin-wind deflector
11 Acoustic damping
12 Cheek pads
13 Inner Lining
14 Standard collar
15 Winter collar
16 Chin straps with snap fastener

Scope of Delivery

The scope of delivery for your helmet consists of the following:

• Additional pair of cheek pads for individual size adjustment
- Replacement visor
- Acoustic damping
- Winter collar
- Helmet bag
- Instructions for use

Important Information

Our helmets are manufactured in accordance with the latest technology and are specifically designed for motorcycling. Whether the owner deems them to be suitable for any other use, is up to him. Wearing a helmet does not exclude the possibility of injury should an accident occur.

To guarantee adequate protection this helmet must be well fitting and securely fastened. Every helmet that is exposed to a hard blow must be replaced.

We guarantee that this item is free of production and material defects. The guarantee does not apply to normal wear and tear and in case of improper use.

Instructions for Use

Safety Advice

• Warning!
  When riding, the helmet may only be used if the chin piece and visor are closed.
• The helmet is equipped with a hinged sun shield, which may only be used in conjunction with a closed visor.
• To open the chin piece, press the release (9) and lift the chin piece up (see Fig. A).
• To close the chin part, pull the chin section down until it audibly locks into place.
• The helmet must fit tightly and the chin strap be closed.
• Always ensure that there is no airflow restriction inside the helmet.
• Ensure that your visor is clean and scratch-free at all times. Exchange damaged visors for a genuine replacement immediately.
  Never use smoked visors at night or when visibility is poor.
  You are able to obtain replacement visors from the stipulated service address for a period of 5 years from the purchase date.
  Visor type: DS-MULTIX301.

• Never modify the helmet, its structure or the individual components.

• The helmet may not be painted or have stickers or labels.

• The helmet is designed to absorb the energy of a blow or a collision by destroying some of its components. In case of a further blow it wouldn't protect you any longer. After an accident, the helmet must be replaced even though it doesn't show external damages.
• Refrain from transporting your helmet by hanging it onto any part of your motorcycle. Keep it away from exhaust pipes and other sources of heat.
• Never clean the helmet with solvents containing petroleum or scouring agents, neither the outside nor the inside.

Always use pH-neutral detergent dissolved in clean water. Careful rub with a soft cloth. Then wipe dry with a lint-free cloth.

The pad may be cleaned with a little soap using a soft brush.

• Only use genuine spare parts for your helmet.
• Only use the sun shield and tinted visor in daylight! Never use in twilight or at night.

Product Characteristics

ECE-R 22.05 Homologation

This helmet is in compliance with ECE-R 22.05 standards and is homologised accordingly. The ECE-R 22.05 standard consists of uniform conditions for the approval of protective

helmets and its visors for drivers and passengers of motorcycles and mopeds. The basic principles for these tests are the so called ECE-Regulations of the Economic Commission for Europe.

Significant Tests of the ECE-Regulation 22.05

• Shock absorbance
  • Dynamic test of wear features
• Field of vision test
• Design strength
  • Sustainability test (Strip-off test)
• Chin straps and lock test
  • Shear test for outside edges
• Friction performance test of the outer shell
• Visor test (mechanical and visual characteristics)
• Chin bar, chin part damping test

Voluntary product testing

Emission certificate

The TÜV Rheinland emission certificate indicates products tested for contaminants and according to current knowledge pose no risks to the health.

Inside Padding with Coolmax® Inserts

Coolmax® by INVISTA is a high-performance fabric fibre

that supports its wearers during sport activities. Based on the patented DuPont-fibre technology, Coolmax ^® transports moisture from the body to the fabric surface where it dries quicker than with any other fabric.

The specially developed fibres of INVISTA that are used for Coolmax ^® -fabrics transport the moisture away from the body to the surface of the fabric where it has the opportunity to evaporate quickly. At the same time, the uniquely formed fibres offer maximum breathing activity, even in wet conditions. In addition, the breathing activity improves the heat regulating effect.

Cheeks, forehead and neck pads of this article are equipped with Coolmax ^® .

HeiQ® Pure dynamiq

PURE Textile freshness

Experience the feeling of lasting freshness through the power of silver, keeping you odour-free all day long.

ADAPTIVE Thermal control

Feel good all over. The textile will cool you down when you're hot, and keep you dry longer in cold weather. Cools and minimises perspiration.

Breath deflector and visor ventilation

The breath deflector (6) decreases fogging of the visor due to exhaled air. Additionally, the air circulation in the visor area is improved.

Integrated sun shield

High-strength HCM outer shell

High Density Copolymer Matrix: High quality ABS plastic is formed under extreme heat and pressure to make a robust and impact-resistant outer shell.

Anti-scratch and Anti-fog coated visor

Separate winter comfort collar

Removable, washable liner

Toolless visor changes

2 Outer shell sizes (S / M and L / XL)

Suitable for eyeglass wearers

Safety lock closure

Use and Installation Instructions

Inner Lining

The inner lining (13) can be completely removed and cleaned separately (see care instructions).

To remove the inner lining, firstly remove the helmet collar and the cheek pads. Then undo the back press-studs of the inner lining and pull the clips of the inner lining from the front side of the helmet (see Fig. C).

Chin-Wind Deflector

The chin-wind deflector (10) is secured to the pivoted piece by means of snaps.

This can be removed and re-attached as required (see Fig. E).

Snap-Fastener System

The snap-fastener enables an individual and quick vernier adjustment of the chin strap.

Press the snap-fastener together until the helmet is sitting comfortably but firm (see Fig. D).

The movable buckle may be used to fasten or secure excess chin strap.

Sun Shield

The integrated sun shield (8) will enable you to quickly and easily react to changed light conditions with the aid of the patent mechanism.

To pull out and retract the sun shield, press the safety latch to operate the slider (4) (see Fig. B).

Note:

• Please take care that the edge of the sun shield does not block your field of vision.
• The sun shield may only be used when the visor is closed and may only be used during the day.

Cheek Pads

You will receive two different pairs of cheek pads (12) for individual size adjustment.

The thinner cheek-pads are already pre-mounted as standard. The thicker cheek pad is enclosed with the helmet separately.

If the helmet is too loose and therefore is not sitting firmly on your head, you can replace the thin cheek pad with the thicker ones.

The cheek pads are affixed via three press-studs respectively in the helmet. You can easily remove the pads (see Fig. F). The thicker cheek pads can now also be affixed in the helmet with three press-studs. You need to be able to hear that each press-stud locks-in.

Acoustic Damping

The acoustic damping (11) is for noise reduction, in particular when driving at high speeds.

Press the acoustic damping into the cavity of the cheek pads (see Fig. G). The acoustic side pad equipped with Velcro faces towards the helmet shell.

Front Vent

The front vent (5) can be opened and closed by means of a slider (see Fig. H).

Top Vent

The top vent (1) can be opened and closed by means of a slider (see Fig. 1).

Winter Collar

To reduce the wind inlet at the bottom of the helmet during periods with very cold temperatures, the pre-installed standard collar (14) can be replaced with the supplied winter collar (15).

Removing the standard collar

Pull the one-piece standard collar out of the helmet (see Fig. J).

Inserting the Winter Collar

First attach the plastic clip in the centre at the back part of the helmet in the groove between the outer shell and the padding.

Once the plastic clip is completely locked, press the complete winter collar again firmly onto the padding of the helmet (see Fig. K).

Visor Replacement

If the pre-mounted visor (7) is damaged or severely scratched, you can exchange it with the replacement visor.

Removal of the Visor

• Slide the visor into the highest position (fully opened) (see Fig. L).
• Pull the visor-locking lever and remove the visor (see Fig. M).

Inserting the Visor

• Place the replacement visor on the hold-down device and observe the correct positioning in the process (fully opened) (see Fig. L).
• Pull the visor-locking lever and place the visor appropriately (see Fig. N).
• Allow the replacement visor to snap in and close the visor.

Selecting the Correct Helmet Size

• Measure the circumference of your head and select the helmet size based on this measurement. Try out several helmets before deciding. Ideally, the skin on your temples will move along when wearing the helmet.

• Ensure that even without the chin strap secured, the helmet does not move much on your head.

• The chin strap must be closed firmly for a secure fit. It is fitted correctly if it is difficult to slide your fingers under the chin strap. However, you must still be able to comfortably breathe, swallow and turn your head.

• Verify the helmet was tested according to the latest ECE standard.

Size table
Size Head circumference
M 57 - 58cm
L 59 - 60cm
XL 61cm

Maintenance and Care

Regular maintenance and care contributes to safety and maintaining the helmet.

Cleaning of the Helmet

• Never use solvents, petrol or other detergents when cleaning the shell and interior of your helmet.
  • Always use pH-neutral detergent dissolved in clean water. Careful rub with a soft cloth. Then wipe dry with a lint-free cloth.

Visor care and cleaning

• After using the helmet, lightly wipe off any grime (e.g. dead insects, dirt, sand, dust etc.) from the visor with a soft cloth and then fully wipe it clean using a dry soft cloth.
• When the visor gets wet (e.g. rainwater) it should always be wiped with a soft cloth.
• When cleaning the visor, never use any petroleum-based solvents or detergents containing abrasives.

Cleaning of the Cheek Pads, Acoustic Pads and Inside Pads

• Hand wash below 30^ .
• Allow to dry at room temperature.
• Avoid sources of heat.
• When not in use, store in a dry, well ventilated place.

Five abstract geometric symbols: crown, triangle, square, cross, and donut (no text or labels)

Storage

When not in use, store the helmet in a dry and well ventilated place at room temperature. Avoid sources of heat. Do not needlessly expose the item to heat, e.g. in the car in hot outside temperatures.

Disposal Instructions

Dispose of the product and all its components through a licensed disposal company or your municipal disposal facilities. Please observe the current regulations. If in doubt, consult your disposal facility about an environmentally friendly disposal.

3 Years Warranty

The product was produced with great care and under constant supervision. You receive a three-year warranty for this product from the date of purchase. Please retain your receipt.

The warranty applies only to material and workmanship and does not apply to misuse or improper handling. Your statutory rights, especially the warranty rights, are not affected by this warranty.

With regard to complaints, please contact the following service hotline or contact us by e-mail. Our service employees will advise as to the subsequent procedure as quickly as possible. We will be personally available to discuss the situation with you.

Any repairs under the warranty, statutory guarantees or through goodwill do not extend the warranty period. This also applies to replaced and repaired parts. Repairs after the warranty are subject to a charge.

Size M IAN: 272277

Size L IAN: 272278

Size XL IAN: 272279

GB Service Great Britain

Tel.: [phone] (£ 0.10/Min.)

E-Mail: [e-mail]

All items are also available for purchase directly from our online shop: www.delta-sport.info

DE AT CH

Bedienungsanleitung

Teilebezeichnung 14

Lieferumfang 14

Wichtige Information 14

Gebrauchsanleitung