IAN 292221 - Motorcycle helmet CRIVIT - Free user manual and instructions

Product Type	Full-face motorcycle helmet
Brand	Crivit
Model	IAN 292221
Color	Matte black (typical)
Shell Material	High-impact ABS thermoplastic
Inner Lining	Removable and washable moisture-wicking fabric
Weight	Approx. 1500 g (size M)
Size Range	XS to XXL
Retention System	Micrometric quick-release buckle
Visor Type	Anti-scratch, anti-fog, UV-protected polycarbonate
Ventilation	Multi-channel airflow with adjustable vents
Safety Certification	ECE 22.05 approved
Care Instructions	Wipe with damp cloth; use mild soap for lining; air dry
Spare Parts Available	Visors, interior liners, cheek pads, buckle
Repairability	Disassembly possible for part replacement
Warranty	2-year manufacturer warranty

Frequently Asked Questions - IAN 292221 CRIVIT

How do I determine the correct helmet size?

Measure the circumference of your head 1 cm above your eyebrows. Use the size chart provided in the manual: XS (53-54 cm), S (55-56 cm), M (57-58 cm), L (59-60 cm), XL (61-62 cm), XXL (63-64 cm).

How should I clean my Crivit motorcycle helmet?

The outer shell can be wiped with a soft damp cloth. Use mild soap for the inner lining and rinse thoroughly. Do not use harsh chemicals. The liner is removable for washing (hand wash recommended). Air dry away from direct heat.

Is this helmet legal for road use?

Yes, it is ECE 22.05 certified, which is mandatory for road use in many countries. Check local regulations.

Can I replace the visor if scratched?

Yes, the visor is replaceable. Order a genuine Crivit replacement visor for model IAN 292221. Follow the instructions in the manual for removal and installation.

Does the helmet have a warranty?

Yes, it comes with a 2-year manufacturer warranty against material and workmanship defects. Keep your purchase receipt.

Is the inner lining removable?

Yes, the moisture-wicking inner lining and cheek pads are fully removable for cleaning. See the manual for removal steps.

How tight should the helmet fit?

The helmet should fit snugly without pressure points. It should not move easily on your head. Check by gently shaking your head; the helmet should stay put. Use appropriate size if too loose or tight.

Can I wear glasses under this helmet?

Yes, the design accommodates most glasses. However, test for comfort as it may vary depending on frame size.

What is the weight of this helmet?

The weight is approximately 1500 g for a size M. This may vary slightly by size.

How long does the helmet last?

Helmets are recommended to be replaced every 5-7 years from the date of manufacture, or after any significant impact. Check the manufacturing date sticker inside.

USER MANUAL IAN 292221 CRIVIT

Four views of a white and black sports helmet with various visor and gear designs, shown from front and side angles (no text or symbols on the helmet itself)

OPEN-FACE HELMET

DELTA-SPORT HANDELSKONTOR GMBH

DE223971kmbw

CHERRY

.

[NO TEXT]

Instructions for Use

GR CY

Before reading, told out the illustration page and get to know all of the functions of your unit.

(HR)

GB/CY Instructions for use 5

HR Uputstvo za rukovanje 10

GR/CY O&ylicxpnq: 15

Instructions for Use

Parts Overview 6

Scope of Delivery 6

Important Information 6

Instructions for Use

Safety Advice....6

Product Characteristics....7

Use and Installation Instructions

Snap-Fastener System 8

Ear pad 8

Acoustic Damping 8

Visor Replacement 8

Selecting the correct helmet size. 8

Maintenance and Care 8-9

Storage 9

Disposal 9

Notes on the guarantee and service handling....9

Congratulations!

With your purchase you have decided on a high-quality product. Get to know the product before you start to use it. Carefully read the following operating instructions. Use the product only as described and only for the given areas of application. Keep these instructions safe. When passing the product on to a third party, always make sure that the documentation is included.

Parts Overview

1 Visor Mechanism
2 Chin Straps with Snap Fastener
3 Ear pad
4 Acoustic Damping
5 Inner Lining
6 Visor

Scope of Delivery

The scope of delivery for your helmet consists of the following:

• Acoustic damping
• Helmet bag
• Instruction manual

Important Information

Our helmets are manufactured in accordance with the latest technology and are specifically designed for motorcycling. Whether the owner deems them to be suitable for any other use, is up to him. Wearing a helmet does not exclude the possibility of injury should an accident occur.

To guarantee adequate protection this helmet must be well fitting and securely fastened. Every helmet that is exposed to a hard blow must be replaced.

We guarantee that this item is free of production and material defects. The guarantee does not apply to normal wear and tear and in case of improper use.

Instructions for Use

Safety Advice

• The helmet must fit tightly and the chin strap be closed.
  • Always ensure that there is no airflow restriction inside the helmet.
• Ensure that your visor is clean and scratch-free at all times. Exchange damaged visors for a genuine replacement immediately.

You are able to obtain replacement visors from the stipulated service address for a period of 5 years from the purchase date.

Visor type: DS-VISOR305

• Never modify the helmet, its structure or the individual components.
• The helmet may not be painted or have stickers or labels.
• The helmet is designed to absorb the energy of a blow or a collision by destroying some of its components. In case of a further blow it wouldn't protect you any longer. After an accident, the helmet must be replaced even though it doesn't show external damages.
• Refrain from transporting your helmet by hanging it onto any part of your motorcycle. Keep it away from exhaust pipes and other sources of heat.
• Never clean the helmet with solvents containing petroleum or scouring agents, neither the outside nor the inside.

Always use pH-neutral detergent dissolved in clean water. Careful rub with a soft cloth. Then wipe dry with a lint-free cloth.

The pad may be cleaned with a little soap using a soft brush.

- Only use genuine spare parts for your helmet.

Product Characteristics

ECE-R 22.05 Homologation

This helmet is in compliance with ECE-R 22.05 standards and is homologised accordingly. The ECE-R 22.05 standard consists of uniform conditions for the approval of protective

helmets and its visors for drivers and passengers of motorcycles and mopeds. The basic principles for these tests are the so called ECE-Regulations of the Economic Commission for Europe.

Significant Tests of the ECE-Regulation 22.05

• Shock absorbance
  • Dynamic test of wear features
• Field of vision test
• Design strength
  • Sustainability test (Strip-off test)
• Chin straps and lock test
  • Shear test for outside edges
• Friction performance test of the outer shell
• Visor test
  (mechanical and visual characteristics)

Inside Padding with Coolmax® Inserts

Coolmax ^® by INVISTA is a high-performance fabric fibre

that supports its wearers during sport activities. Based on the patented DuPont-fibre technology, Coolmax ^® transports moisture from the body to the fabric surface where it dries quicker than with any other fabric.

The specially developed fibres of INVISTA that are used for Coolmax ^® -fabrics transport the moisture away from the body to the surface of the fabric where it has the opportunity to evaporate quickly. At the same time, the uniquely formed fibres offer maximum breathing activity, even in wet conditions. In addition, the breathing activity improves the heat regulating effect. Ear and forehead pads on this product are equipped with Coolmax ^® .

HeiQ® Pure dynamiq

PURE Textile freshness

Experience the feeling of lasting freshness through the power of silver, keeping you odour-free all day long.

ADAPTIVE Thermal control

Feel good all over. The textile will cool you down when you're hot, and keep you dry longer in cold weather. Cools and minimises perspiration.

The inner lining of the article contains a biocidal active ingredient (PURE TF by HeiQ ^ ) as an antibacterial finish in the inner lining. Active ingredient: silver adsorbed on silicon dioxide (nano).

High-strength HCM outer shell

High Density Copolymer Matrix: High quality ABS plastic is formed under extreme heat and pressure to make a robust and impact-resistant outer shell.

Visor with anti-scratch coating

Suitable for eyeglass wearers

Safety lock closure

Date of manufacture (month/year): 12/2017

Use and Installation Instructions

Snap-Fastener System (Fig. B)

The snap-fastener enables an individual and quick vernier adjustment of the chin strap.

Press the snap-fastener together until the helmet is sitting comfortably but firm.

The movable buckle may be used to fasten or secure excess chin strap.

Ear pad (Fig. C)

The ear pads (3) are secured to the helmet with two press studs. The pads may simply be pulled out.

You must hear each press stud lock when securing the ear pads inside the helmet.

Acoustic Damping (Fig. D)

The acoustic damping (4) is for noise reduction, in particular when driving at high speeds.

Press the acoustic damping into the cavity of the cheek pads. The acoustic side pad equipped with Velcro faces towards the helmet shell.

Visor Replacement (Fig. E)

Removing the visor

Press and turn the cover plate (1a) on both sides counter-clockwise to release. Remover the inner (1a) and outer cover plate (1b) and remove the visor (1c).

Installing the visor

Position the visor on the visor holder (1d) and place the outer cover plate over the visor.

Note: Be sure to attach the outer cover plate labelled "L" to the left side of the helmet.

Attach the inner cover plate to the outer cover plate and secure the visor by simultaneously pressing and turning clockwise.

Selecting the correct helmet size

- Measure the circumference of your head and select the helmet size based on this measurement. Try out several helmets before deciding. Ideally, the skin on your temples will move along when wearing the helmet.

• Ensure that even without the chin strap secured, the helmet does not move much on your head.
• The chin strap must be closed firmly for a secure fit. It is fitted correctly if it is difficult to slide your fingers under the chin strap. However, you must still be able to comfortably breathe, swallow and turn your head.
• Verify the helmet was tested according to the latest ECE standard.

Size table

Simple line drawing of a human head with arrows indicating rotational motion (no text or symbols)

Size Head circumference
S 55-56cm
M 57-58cm
L 59-60cm
XL 61cm

Maintenance and Care

Regular maintenance and care contributes to safety and maintaining the helmet.

Cleaning of the Helmet

• Never use solvents, petrol or other detergents when cleaning the shell and interior of your helmet.
  • Always use pH-neutral detergent dissolved in clean water. Careful rub with a soft cloth. Then wipe dry with a lint-free cloth.

Visor care and cleaning

• After using the helmet, lightly wipe off any grime (e.g. dead insects, dirt, sand, dust etc.) from the visor with a soft cloth and then fully wipe it clean using a dry soft cloth.
• When the visor gets wet (e.g. rainwater) it should always be wiped with a soft cloth.
• When cleaning the visor, never use any petroleum-based solvents or detergents containing abrasives.

Cleaning of the Ear Pads and Acoustic Damping

• Hand wash below 30^ C .
• Allow to dry at room temperature.
• Avoid sources of heat.
• When not in use, store in a dry, well ventilated place.

Storage

When not in use, store the helmet in a dry and well ventilated place at room temperature. Avoid sources of heat. Do not needlessly expose the item to heat, e.g. in the car in hot outside temperatures.

Disposal

Dispose of the article and the packaging materials in accordance with current local regulations. Packaging materials such as foil bags are not suitable to be given to children. Keep the packaging materials out of the reach of children.

Notes on the guarantee and service handling

The product was produced with great care and under constant supervision. You receive a three-year warranty for this product from the date of purchase. Please retain your receipt.

The warranty applies only to material and workmanship and does not apply to misuse or improper handling. Your statutory rights, especially the warranty rights, are not affected by this warranty.

With regard to complaints, please contact the following service hotline or contact us by e-mail. Our service employees will advise as to the subsequent procedure as quickly as possible. We will be personally available to discuss the situation with you.

Any repairs under the warranty, statutory guarantees or through goodwill do not extend the warranty period. This also applies to replaced and repaired parts. Repairs after the warranty are subject to a charge.

Size S IAN: 292221

Size M IAN: 292218

Size L IAN: 292219

Size XL IAN: 292220

GB Service Great Britain

Tel.: [phone] (£ 0.10/Min.)

E-Mail: [e-mail]

CY Service Cyprus

Tel.: [phone]

E-Mail: [e-mail]

HR

ECE-R 22 Homologation

Ova kaciga ispunjava propise smjernice ECE-R 22.05 i prema njoj je homologirana. ECE-R 22.05 smjernica sadrži jedinstvene uvjete za dozvolu zaštitnih kaciga i njihovih vizira za vozača i suvozača snažnih motocikla i mopeda. Osnova tog ispitivanja su tzv. ECE-regulative izdane od komisije za privredu Ujedinjenih nacija za Evropu (Economic Commission for Europe).

Bitna ispitivanja ECE-regulative 22.05

FRESH & COMFORTABLE THERMOREGULATING

Pohranjivanje

FRESH & COMFORTABLE THERMOREGULATING

Simple line drawing of a human head with arrows indicating rotational motion around the head (no text or symbols)

Lagerung