IAN 311639 - Uncategorized ULTIMATE SPEED - Free user manual and instructions

Product Type	Smartphone Holder
Brand	Ultimate Speed
Model	IAN 311639
Intended Use	Holding smartphones in automobiles
Mounting Type	Vent clip
Attachment Method	Magnetic
Material	Plastic, metal, adhesive
Included Items	1 Magnetic holder, 1 Metal plate, 1 User manual
Dimensions (Approx.)	5 x 5 x 5 cm
Weight (Approx.)	100 g
Cleaning	Dry, lint-free cloth
Safety	Do not obstruct driver's view or place near airbags
Warranty	3 years from date of purchase
Disposal	Recycling of packaging; local disposal for product
Installation	Adhere metal plate to phone or case, attach clip to vent
Part Number	HG04494A
Version	12/2018
Manufacturer	OWIM GmbH & Co. KG

Frequently Asked Questions - IAN 311639 ULTIMATE SPEED

How do I install the smartphone holder?

First, clean the surface where you will attach the metal plate. Remove the backing and press firmly onto the back of your phone or inside a case. Then, clip the magnetic holder onto a vent blade (use an inactive vent to avoid overheating). Finally, attach your phone to the holder.

Can I use this holder with any smartphone?

Yes, as long as you attach the included metal plate to the back of your phone or inside a protective case. The magnetic holder will then securely hold any phone with the plate.

Is it safe to use while driving?

No. You should not install, adjust, or use the holder while driving. Position it so it does not obstruct your view or interfere with airbags. Only attach your phone when the vehicle is parked.

How do I clean the holder?

Clean the product with a dry, lint-free cloth. Do not use water or cleaning solvents, as they may damage the adhesive or magnetic components.

What is the warranty period?

The product comes with a 3-year warranty from the date of purchase. Keep your original sales receipt as proof. The warranty covers material and manufacturing defects but not normal wear or misuse.

Can I attach the metal plate to a phone case?

Yes, you can attach the metal plate to the inner surface of a protective case. This allows you to keep the plate hidden while still using the magnetic holder.

Will the magnetic holder damage my phone?

No, the magnetic field is not strong enough to damage modern smartphones. However, avoid placing it near credit cards or pacemakers. Always follow the safety instructions.

How do I remove the metal plate adhesive?

If you need to reposition, carefully peel off the metal plate. Clean any residue with a mild adhesive remover. The adhesive may weaken after removal, so reuse is not recommended.

Is this holder suitable for tablets?

No, this holder is designed for smartphones only. Tablets are too heavy and may not be held securely by the magnetic force.

What if the magnetic hold seems weak?

Ensure the metal plate is properly attached and the holder is firmly clipped to the vent. If the phone is heavy, consider using a thinner case. Also, check that the plate is not covered by thick materials.

USER MANUAL IAN 311639 ULTIMATE SPEED

SOPORTE PARA SMARTPHONE / SUPPORTO PER SMARTPHONE

ES

SOPORTE PARA SMARTPHONE

Operation and safety notes

DE AT CH

SMARTPHONE-HALTER

safety notes Page 54

graph TD
    A["Smartphone with a switch"] --> B{Switch is selected}
    B -->|Yes| C["Mobile Phone with a close button"]
    B -->|No| D["Mobile Phone with a close button connected via cable"]
    C --> E["Mobile Phone with a close button also connected via cable"]
    D --> F["Mobile Phone with a close button connected via cable"]
    E --> G["Mobile Phone with a close button connected via cable"]
    F --> H["Mobile Phone with a close button connected via cable"]

graph TD
    A["Device"] -->|1| B["Device"]
    B -->|2| C["Device"]

Intended use......Page 57

Scope of delivery......Page 58

Parts description......Page 58

Safety instructions ......Page 59

Before use......Page 63

Installation......Page 63

Cleaning and care ......Page 65

Disposal Page 65

Warranty......Page 66

List of pictograms used

Read the instructions!

Observe the warnings and safety notes!

Smartphone Holder

Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. Familiarise yourself with the product before using

it for the first time. In addition, please carefully refer to the operating instructions and the safety advice below. Only use the product as instructed and only for the indicated field of application. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intended use

This product is intended to hold the smartphones and mobile

phones in automobiles. The product is for private use only.

Scope of delivery

1 Magnetic holder
1 Metal plate
1 User manual

Parts description

1 Metal plate
2 Magnetic holder

Safety instructions

PLEASE READ THE INSTRUCTIONS PRIOR TO USE! PLEASE KEEP THE INSTRUCTIONS IN A SAFE PLACE! WHEN PASSING THIS PRODUCT ON TO A THIRD PARTY, ALSO INCLUDE ALL DOCUMENTS.

OF FATAL INJURY AND ACCIDENT HAZARD FOR TODDLERS AND SMALL

CHILDREN! Never leave children unsupervised with the packaging materials. The packaging material poses a suffocation hazard. This product is not a toy.

- Vent clip needs to be mounted on inactive vent to prevent phone or tablet from shutting down due to overheating or freezing (see Fig. D-E).

When using in vehicles, do not place in a position that obstructs drivers view. This is dangerous and illegal in some countries.
- Do not place on or near airbag deployment areas.
Do not install near the steering wheel. This can result in accidents and injuries, particularly in the impact area of the head.
The positioning of the product must not impair the driver in any way. The field of vision must be clear.
- Do not use, install or adjust whilst driving.

ACCIDENTS! Do not reach or search for fallen objects whilst driving.

ACCIDENTS! Improper use can damage leads!

OF ACCIDENTS! In case of failure to observe the safety guidelines, the holder or the product may come loose and be damaged. Consequential damages cannot be ruled out.

The manufacturer does not accept any liability for damages

resulting from unintended use of the product.

Before use

Refer to manufacturer's phone manual before use.

• Installation

To install the metal plate 1 on the product:

a) Decide on metal plate 1 position. The metal plate 1 can be placed on the back surface of

a mobile phone or the inner surface of a protection case (see Fig. A).

b) Clean the desired surface to remove dust and grease.
c) Remove the backing on the metal plate 1 to expose adhesive and press firmly to secure on desired surface (see Fig. A).
d) Attach vent clip onto air deflector or an inactive vent (see Fig. D-E).
e) Attach phone on the holder ^2 (see Fig. B).

- Cleaning and care

- Clean the product with a dry, lint-free cloth.

- Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. Should this product show any fault in materials or manufacture within

3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you.

The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty applies to defects in material or manufacture. This warranty does not cover product

parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

PDF ONLINE
www.lidl-service.com

OWIM GmbH & Co. KG

Stiftsbergstraße 1

DE-74167 Neckarsulm

GERMANY

Model-No.: HG04494A

Version: 12 / 2018