PB08DB - Hi-Fi System BLAUPUNKT - Free user manual and instructions

Product Type	Hi-Fi System
Brand	Blaupunkt
Model	PB08DB
Power Output	20W RMS (2 x 10W)
Frequency Response	20Hz - 20kHz
Supported Media	CD, CD-R, CD-RW, MP3 via USB
Radio	FM with 20 presets
Bluetooth	Yes, version 4.2
Connectivity	USB, AUX input, headphone jack
Dimensions (W x H x D)	300 x 200 x 150 mm
Weight	2.8 kg
Power Supply	AC 100-240V, 50/60Hz
Remote Control	Included
Display	LCD screen
Speaker Type	2-way bass reflex
Cleaning	Wipe with dry soft cloth
Safety	Do not place in damp areas
Spare Parts	Available from authorized service centers
Reparability	Refer to qualified technician

Frequently Asked Questions - PB08DB BLAUPUNKT

How to set the clock on Blaupunkt PB08DB?

Press and hold the Clock button until the display flashes, then use the + and - buttons to adjust hours and minutes. Press Clock again to confirm.

How to connect a Bluetooth device?

Press the Source button to select Bluetooth mode. On your device, search for Blaupunkt PB08DB and pair. The system will confirm with a tone.

What to do if the CD does not play?

Ensure the CD is inserted with the label facing up. Check if the disc is scratched or dirty. Clean the disc with a soft cloth from center to edge. Also try a different CD.

How to clean the unit?

Unplug the system and use a soft, dry cloth to wipe the exterior. Do not use any solvents or abrasive cleaners. Avoid moisture entering the vents.

Why is there no sound from the speakers?

Check that the volume is not at minimum (press Volume +). Make sure the correct source is selected (e.g., CD, FM, Bluetooth). Ensure speaker wires are properly connected.

How to store radio stations?

Tune to a station manually, then press and hold one of the preset buttons (1-20) until the display flashes. Repeat for other stations. You can also use auto-scan.

Can I play music from a USB drive?

Yes, insert a USB drive with MP3 files. The system will automatically switch to USB mode and start playback. Use the Skip and Play/Pause buttons to control.

How to reset the system to factory settings?

Press and hold the Power button for 10 seconds while the unit is on. The display will show 'RESET' and the system will restart. All settings will be cleared.

What type of batteries does the remote use?

The remote requires two AAA batteries (not included). Open the battery compartment on the back, insert batteries with correct polarity, and close the cover.

How to improve FM reception?

Fully extend the FM antenna wire and reposition it for best signal. Avoid placing the unit near metal objects or electronic devices. You can also try rotating the unit.

USER MANUAL PB08DB BLAUPUNKT

Enjoy it.

Important Safety Instructions

RISK OF ELECTRIC SHOCK DO NOT OPEN

Caution:

To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

Explanation of Graphical Symbols:

The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

To achieve the utmost in enjoyment and performance, and in order to become familiar with its features, please read this manual carefully before attempting to operate this product. This will assure you years of trouble free performance and listening pleasure.

Important Notes

• This safety and operating instruction should be retained for future reference.

• The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom. • Do not install the product in the following areas: - Places exposed to direct sunlight or close to radiators. • On top of other stereo equipment that radiate too much heat. - Blocking ventilation or in a dusty area. • Areas where there is constant vibration. • Humid or moist places. • Do not place near candles or other naked flames. • Operate the product only as instructed in this manual. • Before turning on the power for the first time, make sure the power adaptor is properly connected. • Plug-in the USB stick directly or use an USB-extension cable which is not longer than 25 cm.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product for future reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and users' instructions should be followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power sources - This product should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
7. Grounding or polarization - the product is not required to be grounded. Ensure that the plug is fully inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some versions of the product are equipped with a power cord fitted with a polarized alternating line plug (a plug having one blade wider than the other). This plug will fit onto the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. When using an extension power-supply cord or a power-supply cord other than that supplied with the appliance, it should be fitted with the appropriate molded plugs and carry safety approval appropriate to the country of use.
8. Power cord protection - Power-supply cords should be routed so that they are not likely to be walked on, kinked or pinched by items placed on or against them, paying particular attention to cords from plugs, receptacles and the point where they exit from the product.
9. Overloading - Do not overload wall outlets, extension cords, or multiple sockets, as this can result in a risk of fire or electric shock.
10. Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar surface. Do not cover the product with any items such as tablecloths, newspapers, etc.
11. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products, including amplifiers that produce heat. No naked flame sources, such as lighted candles, should be placed on the apparatus.
12. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
13. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
14. Cleaning - Unplug the product from the wall outlet before cleaning. Dust in the woofer may be cleaned with a dry cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the cabinet; spray onto the cloth. Be careful not to damage the drive units.
15. Attachments - Do not use attachments not recommended by the product manufacturer, as they may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Unused periods - The power cord of the appliance should be unplugged from the outlet during lightning storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug from the main power source or wall power source when not in use. When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely accessible at all times while the product is in use.
25. Install the product near a wall socket or extension cord, and ensure it is easily accessible.
26. The highest environmental temperature suitable for this product is 35°C.
27. ESD hints - If the product may reset or fail to reset to operation of control due to electrostatic discharge, just switch it off and reconnect it again, or move the product to another location.
28. Battery

a. The batteries must not be exposed to excessive heat such as sunshine, fire or the like.

b. The batteries should be drawn to the environmental aspects of battery disposal.

c. Battery usage CAUTION - to prevent battery leakage which may result in body injuries, property damage, or damage to the apparatus:

. Install all batteries correctly, + and - as marked on the apparatus.

. Do not mix batteries (old and new or carbon and alkaline, etc.)

. Remove batteries when the unit is not used for a long time.

ERP2 (Energy Related Products) note

This product with ecodesign complies with the stage 2 requirements of Commission Regulation (EC) No. 1275/2008 implementing Directive 2009/125/EC regarding standby and off mode electric power consumption of electronic household and office equipment. After 30 minutes without any audio input, the device will automatically switch into standby mode. Follow the instruction manual to resume operation.

Important note:

This device is equipped with an energy saving mode: if no signal is given during 30 minutes, the device will switch automatically into standby mode in order to save energy (ERP 2 standard). Please note that low volume setting in the audio source may be recognized as "no audio signal": this will affect the capability of signal detection from the device and can also originate an automatic switch into standby mode. If this happens, please reactivate the audio signal transmission or increase the volume setting on the audio source player (MP3 player, etc.), in order to resume playback. Please contact the local service center if the problem remains.

WARNING

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. Never use the device unsupervised! Switch off the device whenever you are not using it, even if this is only for a short while.
2. The appliance is not intended to be operated by means of an external timer or separate remote control system.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
4. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
5. The unit should not be impeded by covering the ventilation opening with items such as newspaper, table-cloths, curtains etc. Make sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit.
6. The apparatus must not be exposed to dripping or splashing, and objects filled with liquids, such as vases, must not be placed on the apparatus.
7. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture, or dust.
8. Do not locate this unit near any water sources, e.g., taps, bathtubs, washing machines, or swimming pools. Ensure that you place the unit on a dry, stable surface.
9. Do not place this unit close to a strong magnetic field.
10. Do not place the unit on an amplifier or receiver.
11. Do not place this unit in a damp area, as the moisture will affect the life of electric components.
12. If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
13. Do not attempt to clean the unit with chemical solvents, as this might damage the finish. Wipe with a clean, dry, or slightly damp cloth.
14. When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the cord.
15. Depending on the electromagnetic waves used by a television broadcast, if a TV is turned on near this unit while it is also on, lines might appear on the TV screen. Neither this unit nor the TV is malfunctioning. If you see such lines, keep this unit well away from the TV set.
16. The mains plug is used as the disconnect device; the disconnect device must remain readily operable.
17. To prevent possible hearing damage, do not listen at high volume levels for long periods.

NOTICE

Conformity

Hereby, Blaupunkt Competence Center 2N-Everpol Sp. z o.o., declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity can be obtained from the product page at www.blaupunkt.com.

Responsible party: 2N-Everpol Sp. z o.o, Puławska 403A, 02-801 Warsaw, Poland, Phone: [phone], E-mail: [e-mail]

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health. Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Recording and playback of material might require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972.

Bluetooth

The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by us is under license. Other trademarks and trade names are those of their respective owners.

Thank you for buying our model. Please read and reference this manual carefully before operating the unit. Please keep the manual for future operation reference.

Control panel

1-Power on/off;

2,3- Previous & Next;

4-Volume control;

5-Guitar input;

6-(Menu button, press it repeatedly to switch setting for Treble/bass/microphone volume/echo/microphone

treble/microphone bass/guitar volume.)

7-Disco light;

8- Play/pause;

9-Mode;

10-wired microphone input jack;

11-USB port;

12-microSD slot;

13- AUX IN jack;

14- Handle;

15- Mute; 16- Tweeter;

17- Woofer;

18- AC power outlet;

19- Display;

20- Bass reflex pipe;

21- Extendable handle: press and hold the bottom button to unlock the handle

Remote controller

1- Power button; 2- Disco light button; 3- Digits button; 4- Mode button; 5,7 - Echo +/- button; 6,20- Volume +/- button; 8,18-Previous & next, Channel -/+ button; 9- Repeat button (repeat one/repeat all/ random); 10 - EQ(flat/POP/Rock/Jazz/Classic) 11, 12- treble+/- button; 13- Mute button; 14- Microphone volume +/- button; 15- Microphone priority button; 16,22- Bass +/- button; 17- Play/pause button; 19, 21 - Guitar +/- button; 23 - +10 button;

Power connection: Please check if the power source corresponds to the rated voltage specification, which is located on the rear panel of the unit. If it does not match, please consult your dealer or service center. Insert the female terminal of the power cord into the AC outlet, and then connect the power plug to the wall-mount socket in order to get the power source.

Battery power charging: The unit has a built-in rechargeable battery that allows playback of music without AC power connection. When the battery is charging, the charging LED will show in red, which is located on the top panel. The charging LED will turn green after fully charged. The battery will also be charged even if you power off the unit, but with available AC power source. The charging time of the battery is 6-8 hours, and 2~4 hours for playback time, depending on the playing volume level. The unit will power off automatically in case of low battery power; please recharge it for playback.

Important notes: In standby mode (short press the power button on the top panel or by remote controller), the unit will start to charge automatically after 15 minutes due to eco design. In case you need urgent charging, please long press the power button (power off) the unit. The unit can be charged instantaneously while music is playing.

Battery use:

1. When the battery is out of power or low, please charge it as soon as possible. If it is not charged for a long time, the battery's internal storage capacity will be reduced, which will make it unable to be fully charged or shorten operation time.
2. If the battery needs to be replaced, please contact your local Blaupunkt after-sales service.
3. Do not charge the battery for more than 24 hours. Over-discharging or overcharging shortens the life of the battery. Repeated charging and discharging affect the battery life as well as the playback time. Playing time cannot be guaranteed under all conditions. Variable battery life cannot be the basis for a warranty claim.

Remote control battery installation

Open the battery door and insert 2 x AAA dry batteries (included) into the compartment; please make sure the polarity of the batteries aims and corresponds to the positive and negative silkscreen-printed symbols in the compartment. Then close the battery door.

Notes:

a. The best working distance for the remote control is within 5 meters without any obstacles in between. Aim the remote control at the sensor located on the front of the unit during operation. b. The sensitivity of the remote control will weaken when the battery power is low. Replace it with a fresh one for operation. c. Remove the battery if the unit will not be used for a long time. d. Dispose of the battery in an environmentally friendly way. Please refer to local government regulations for details.

General operation

1. Power on/off: Long press (2 seconds) the power button on the top panel to power the unit on or off. Short press the power button on the top panel or on the remote control to put the unit in standby mode or wake it up. We suggest powering off the unit completely if it will not be used for a long time.
2. Play source selection: Press the mode button on the top panel or the mode button on the remote control to switch the play source between FM, Bluetooth, Line in, USB, and microSD.
3. Volume adjustment: Turn the main volume knob on the top panel or press the VOL+/- buttons on the remote control to increase or decrease the output volume level.
4. Treble and bass adjustment: Short press the menu button on the top panel, then rotate the volume knob to adjust the treble level. The relevant digit will show on the display, and the output sound will change simultaneously. Press the button again to skip to bass adjustment. The same function can be achieved by pressing the treble +/- and bass +/- buttons on the remote control.
5. Sound silence: Press the MUTE button on the top panel or the remote control to mute the sound. Press it again to resume the sound output.
6. Preset EQ: Press the EQ button repeatedly on the remote control to switch the preset equalizer between FLAT, POP, ROCK, JAZZ, and CLASSIC.
7. Play/pause: Press the button to pause the music, and press it again to resume playback in Bluetooth, USB, or microSD mode.
8. Repeat and random: Press the repeat button to switch the music playback between repeat one, repeat all, and random modes.
9. Disco light: Press the light button repeatedly to switch the disco light between 6 types of effects, and to turn off the light.
10. Digits and +10 button: Press the digit buttons to select a track in USB/microSD mode or to switch preset stations in FM mode. Press the +10 button for fast track selection.
11. Previous/next: Short press to switch to the previous or next track in Bluetooth, USB, or microSD mode.
12. Menu button operation: This is a multiple function button. Press it repeatedly to switch settings for treble, bass, microphone volume, echo, microphone treble, microphone bass, and guitar volume. Then rotate the volume knob immediately to adjust the relevant level. Wait for a while to quit the setting. (Display information: TE = main output treble, BS = main output bass, CU = microphone volume, EC = echo, T = microphone treble, B = microphone bass, GE = guitar)

FM radio operation

Before starting FM radio listening, try moving the unit near a window or to another location to improve the FM signal. The unit has a built-in internal antenna for FM reception.

1. Auto scan and preset radio stations (All-in-one): Briefly press the play/pause button on the top panel or remote control to automatically scan and save available radio stations. After scanning, the unit will automatically play the first preset station. (Maximum supported preset stations: 40)
2. Preset station selection: In radio mode, press the next/previous button on the top panel or remote control to select and play the previous or next preset station. You can also quickly select a preset station by entering its number using the digit buttons on the remote control.
3. Manual tuning: Press and hold the previous/next button for 2 seconds to scan for available stations in the upward or downward frequency direction, and the unit will automatically play the found station. Alternatively, enter the radio station's frequency number using the digit buttons on the remote control and wait a moment; the unit will skip to and play that station directly.

USB/microSD playback operation

The product includes USB/microSD playback functionality, which can decode and play music from a USB or microSD storage device. Before starting, copy MP3 or WMA format music files to the device, and insert the device into the unit first, because USB/microSD mode is only available when the device is successfully connected. The unit will then detect and automatically play the MP3/WMA music files on the device.

Track selection: Briefly press the next/previous button to select the next or previous track. Press and hold the button to fast-forward or rewind the playing music, and release the button to resume normal playback.

In USB/microSD mode, you can use functions such as play/pause, mute, repeat, EQ, treble/bass, and +10. Please refer to the general operation section of this manual for instructions.

Notes:

a. Connecting the USB stick via a USB extension cable for playback is not recommended, as it may produce noise or intermittent sound due to audio data loss during transfer. b. Decoding and playback of all MP3/WMA/WAV/FLAC format music is not guaranteed. c. The maximum supported storage device is up to 32GB. d. Some devices of different brands may take a little longer to start playback; please note that this is not a malfunction.

Bluetooth operation

This product includes Bluetooth function, which allows wireless playback of music from other Bluetooth devices (such as smartphones, tablets, etc.).

1. Press the mode button repeatedly to enter Bluetooth mode. The Bluetooth symbol will flash on the display, indicating that the unit is ready to pair.
2. Enable the Bluetooth function on your device and search for available devices (please refer to your device's manual for operation). Then check the available Bluetooth devices on the list. Select "BP PB08" for pairing. The Bluetooth symbol will become steady on the display after successful pairing.
3. Select and play music from your Bluetooth device, and the sound will come out from the speaker.
4. Press the previous/next button to select the last or next track during playback.
5. In Bluetooth mode, you can achieve functions such as play/pause, mute, treble and bass adjustment. Please refer to the general operation section of this manual for operation.

Notices:

a. Due to different designs and brands, successful pairing with all Bluetooth devices is not guaranteed. b. The best working distance for Bluetooth is within 10 meters without any obstacles in between. c. The unit can only pair and work with one Bluetooth device at a time. d. In case of an incoming phone call during Bluetooth playback, the music will stop temporarily and resume after the call ends. e. Long press the play/pause button on the top panel to disconnect from the current Bluetooth device and start pairing with another device.

Bluetooth TWS (True Wireless Stereo) Playing: The speaker includes TWS function via Bluetooth. If you have two units, switch both to Bluetooth mode. For the first time playing, choose one speaker as the master. Then long press (3 seconds) the mode button on the top panel to pair with the other speaker. A short notice sound will come from the speaker after TWS pairing is successful. The display shows "SLAU" in a steady state on the slave speaker, and "BLUE" flashes on the master's display. Then you can start Bluetooth pairing and operation as usual, but the sound will output from both speakers.

If you switch to another playback mode such as FM, microSD, USB, or Line-in via the master speaker, the two speakers will automatically pair with each other and produce sound from both speakers. During the initial TWS pairing, there may be some brief "sa sa sa..." noise from the speaker, which is not a malfunction.

In TWS playback mode, the master speaker controls the main functions. Some functions are not available on the slave speaker; please note that this is not a malfunction. If you turn off the master speaker, TWS playback will stop.

If you put the speaker in standby or power it off and on, you need to long press (3 seconds) the mode button to re-pair TWS. Long pressing the mode button again will exit TWS playback mode.

Line-in / AUX IN / MP3 link operation

To connect and play music from another player or amplifier via wire, follow the steps below.

Use the included audio cable to connect the AUX IN jack on the top panel of the unit, and connect the other end to the line-out or headphone jack of an external player such as an MP3, CD, DVD, mixer, or other audio device. Select and play music on the external player, and the sound will be output from the speaker.

In line-in playback mode, the external player controls the main functions. However, you can also control the volume, mute the sound, and adjust treble and bass on the speaker.

Karaoke

Open the battery compartment of the wireless microphone (included), insert 2 AA size dry batteries (not included) according to the positive and negative polarity symbols inside the compartment, then close the battery door. Push the switch to the ON position to power on the microphone. The speaker will automatically pair with the wireless microphone after a few seconds. Adjust the microphone output volume level properly on the top panel, and then you can start singing. The unit also has a wired microphone input jack; plug a wired microphone (not included) into the 6.5mm jack, then turn on the microphone to sing.

Tips:

a. Microphone volume/echo/treble/bass setting: Short press the menu button repeatedly on the top panel to switch between settings for treble, bass, microphone volume, echo, microphone treble, microphone bass, and guitar volume. Then rotate the volume knob immediately to adjust the corresponding level. Wait a moment to exit the setting. (Display information: TE = main output treble, BS = main output bass, CU = microphone volume, EC = echo, T = microphone treble, B = microphone bass, GE = guitar)

Wireless microphone suggested settings: microphone volume = 9; microphone treble = 8; microphone bass = 2; echo = 4. (Reference only)

b. There may be loud noise from the speaker when you adjust volume, treble, bass, or echo to high levels due to overloading and distortion on the microphone. This is not a malfunction. So please turn these settings up slowly, and if you encounter such loud noise, turn them back down or turn off the microphone and try again.

c. You can use the karaoke function and listen to the music at the same time. If you need to increase the karaoke volume and decrease the background music, you can adjust the separate microphone volume and main volume knobs.

d. Please turn off the microphone when you put it next to the speaker, otherwise it will cause a loud noise.

e. There is a mute switch on the wireless microphone that can silence the microphone output if you select it.

f. This model has a microphone priority function. If you activate it from the remote controller, the karaoke voice will be output from the speaker with priority (covering the background music), and it will automatically resume background music output after you finish singing.

g. It allows you to sing with both the wireless and wired microphones at the same time.

Guitar input: If you need to connect a musical instrument like a guitar, you can connect it to the 6.3mm guitar input jack on the top panel using your own cable (not included). Press the menu button repeatedly on the top panel to switch to the guitar volume setting (the display shows "GE" for guitar), then rotate the volume knob immediately to adjust the level.

Wait a moment to exit the setting. Play the guitar, and you will hear the sound from the speaker. You can also adjust the output level by pressing the guitar +/guitar – buttons on the remote controller.

Troubleshooting

1. The speaker cannot turn on.

a. Please check if the power connection is correct.

1. No sound output.

a. Please try adjusting the volume knob and check the play source.

b. Please contact the service center for support if the issue persists.

1. Sound distortion.

a. Please try adjusting the music to a lower volume level.

b. Check the status of treble/bass setting.

1. Background noise on FM station.

a. Try to move the unit to another place for better reception.

b. Scan and switch to another station for listening.

Specifications

Power source: AC 110-240V, 50/60 Hz.

DC battery power: 8V/7AH.

FM frequency: 87.5-108.0 MHz.

USB rating: 5V, 500mA, 2.0 versions, supported up to 32GB storage device.

MicroSD card: supported up to 32GB storage device.

USB/microSD card support music format: MP3, WMA, WAV, FLAC (not guarantee all such files).

Bluetooth: V5.0, within 10 meters for operation.

RMS output power: 2 x 20W.

Microphone: 1 x 6.5cm input, wired microphone connection.

2 x wireless microphone (Frequency: 208.8MHz, 215MHz, power source: 2 x 1.5V, AA).

1 x Guitar input.

Power consumption: 40W.

Standby power consumption: <0.5W.

(The above specifications may change without prior notice.)

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

RISK OF ELECTRIC SHOCK DO NOT OPEN

Caution:

To reduce the risk of electric shock, do not remove the cover or the rear panel. There are no user-serviceable parts inside. Servicing should be performed only by qualified service personnel.

Explanation of graphic symbols:

The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle alerts the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

Inserting the remote control batteries

Open the battery compartment cover and insert 2 AAA batteries (included). Make sure the batteries are inserted according to the positive and negative polarity symbols printed in the compartment. Then close the battery compartment cover.

Notes:

10 - Equalizer EQ (flat/POP/Rock/Jazz/Classic)

FM frequency: 87.5-108.0 MHz.

Installing the remote control battery

1- on/off switch;

10 - Equalizer EQ (flat/POP/Rock/Jazz/Classic)

02-801 Warsaw, Poland

phone: [phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems please contact our service.

Tel. [phone]

E-mail: [e-mail]

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.

Enjoy it.