ZFS0916B - Random Orbital Sander Zelmer - Free user manual and instructions

Product Type	Random Orbital Sander
Brand	Zelmer
Model	ZFS0916B
Power Supply	230 V ~ 50 Hz
Power Consumption	250 W
No-Load Speed	6,000 - 12,000 rpm
Orbit Diameter	2.5 mm (3/32 in)
Pad Size	125 mm (5 in)
Abrasive Attachment	Hook and loop (Velcro)
Dust Collection	Built-in dust bag (microfilter)
Dust Port Diameter	35 mm
Weight	1.4 kg (3.1 lbs)
Dimensions (L x W x H)	180 x 120 x 150 mm
Main Handle	Ergonomic soft-grip
Speed Control	Variable speed dial
Sound Pressure Level	80 dB(A)
Vibration Level	5.0 m/s²
Protection Class	Class II (double insulated)
Cable Length	2.5 m
Package Contents	Sander, dust bag, 3 sanding discs, manual

Frequently Asked Questions - ZFS0916B Zelmer

How do I change the sanding disc on the Zelmer ZFS0916B?

Press the spindle lock button to secure the pad, then twist the old disc off. Align the new hook-and-loop disc and press firmly onto the pad.

Can I use this sander for wet sanding?

No, the ZFS0916B is designed for dry sanding only. Using water or other liquids can damage the tool and create electrical hazards.

What is the recommended dust extraction method?

Connect the dust port to a vacuum cleaner using the included adapter, or use the built-in dust bag for light sanding. Empty the bag frequently for optimal performance.

How do I adjust the sanding speed?

Turn the variable speed dial located on the top of the sander to choose from 6,000 to 12,000 rpm. Lower speeds for delicate surfaces, higher for material removal.

Is the Zelmer ZFS0916B suitable for automotive paint sanding?

Yes, with fine-grit discs (e.g., P800+) and low speed, it can be used for paint sanding. Always test on a hidden area first.

How often should I replace the dust bag?

Replace the dust bag when it shows signs of wear or when suction decreases significantly. Periodic washing (if washable) can extend its life.

What maintenance does the sander require?

Regularly clean the ventilation slots and dust port. Check the power cord for damage. Lubricate internals only if recommended by a professional.

Can I use third-party sanding discs?

Yes, any 125 mm (5 in) hook-and-loop disc is compatible. Ensure the holes for dust extraction match the pad pattern.

Why does the sander vibrate excessively?

Excessive vibration may indicate an unbalanced disc, worn pad, or debris inside. Stop the tool, inspect and replace the disc if needed, and clean the pad.

What safety precautions should I take?

Always wear safety goggles and a dust mask. Disconnect power before changing discs. Avoid loose clothing and keep hands away from the rotating pad.

USER MANUAL ZFS0916B Zelmer

White Zeimer kitchen appliance with a curved handle and control knob (no visible text or symbols on body)

PL INSTRUKCJE UŻYTKOWANIA Krajalnica
EN USER MANUAL Meat slicer
DE BENUTZERHANDBUCH Aufschnittschneidemaschine
CZ NÁVOD K POUŽITÍ Kráječ masa
SK NAVODILA ZA UPORABO Krájač mäsa

DZIEKUJEMY ZA WYBRANIE MARKI ZELMER. MAMY NADZIEJE, ŻE PRODUKT SPEŁNI PAŃSTWA OCZEKIWANIA.

OSTRZEŻENIE

WE WOULD LIKE TO THANK YOU FOR CHOOSING ZELMER. WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.

WARNING

Please read the instructions for use carefully prior to using the product. store these in a safe place for future reference.

DESCRIPTION

1. Main Body
2. Safety Button
3. On/Off Button
4. Stand
5. Thickness Guide
6. Food tray
7. Food pusher
8. Blade
9. Platform
10. Dial for thickness adjustment
11. Sliding Platform

SAFETY INSTRUCTIONS

Check that your mains voltage corresponds to that stated on the appliance.

From time to time check the cord for damages. Never used the appliance if cord or appliance shows any signs of damage.

Only use the appliance for domestic purposes and in the way indicated in these instructions.

Never immerse the appliance in water or any other liquid for any reason whatsoever. Never place it into the dishwasher.

Never use the appliance near hot surfaces.

If the supply cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Before cleaning, always unplug the appliance from the power supply.

EN

All repairs should be made by a competent qualified electrician.

Never use the appliance outside and always place it in a dry environment.

Never use accessories which are not recommended by the producer. They could constitute a danger to the user and risk to damage the appliance.

Never move the appliance by pulling the cord. Mark sure the cord cannot get caught in any way. Do not wind the cord around the appliance and do not bend it.

Mark sure the appliance is set on a flat surface.

Unplug the appliance when not in use.

Only use this slicer for cooking applications. Only cut articles such as cheese, meat, bread and preparations. Never cut frozen food with this slicer.

Never cut food only by using your hands, always use the slide and its food guide unless it is impossible because of the size of the article. Make sure never to touch the knife.

This kind of appliance cannot function continuously; it is not a professional type of appliance. It is necessary to make temporary stops.

The blade of the appliance is extremely sharp, always be careful when cleaning the appliance.

It is absolutely necessary to keep this appliance clean at all times as it comes into direct contact with food.

Make sure the appliance is unplugged when disassembling it before cleaning.

Never touch the blade when the appliance is in use.

Furthermore, never try to stop the movement of the blade in any way whatsoever.

IMPORTANT WARNINGS

Any other servicing should be performed by an authorized service representative.

This appliance is not for professional use. You should follow the requested breaks. Failure to follow this instruction carefully may result in damage to the motor. Please refer to the rating label for the maximum continuous usage timer (KB/MAX. 3 minutes where 3 is maximum usage time).

The breaks should last at least 3 minutes.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Eurogama Sp. z o.o. disclaims all liability for damages that may occur to people, animals or objects, for the non-observance of these warnings.

BEFORE USE

Clean all parts that come into contact with food before using the appliance before the first time (or after prolonged storage).

USE

IMPORTANT: After 3 minutes of continuous use it needs to rest for 10 minutes. After 5 cycles, it needs to rest for half an hour.

Place the appliance on a flat and dry surface. The person using the appliance should operate the buttons with the right hand and the food pusher with the left hand. Plug the appliance into the mains.

Unfold the platform (9). Place the food tray and food pusher on the sliding table. Insert the sliding table in the platform.

Move the sliding table back and forth a few times to ensure proper movement.

Select the required slice thickness from 0-15mm. Turn the dial (10) clockwise for thicker slices or counterclockwise for thinner slices.

Place the food to be sliced on the sliding table, and press it lightly against the thickness guide (5) using the piece holder.

Press and hold the safety button and press the on/off button. The blade starts rotating.

Move the sliding table back and forth to slice the food. Always keep your left hand's fingers to the left of the piece holder.

TIPS

To slice meats wafer thin, chill thoroughly for 2-4 hours in freezer before slicing.

When slicing warm boneless roasts, remove from oven and let set 15 to 20 minutes before slicing.

Cold cuts keep longer and retain flavor if sliced as needed.

Foods with an uneven texture-like fish and thin steaks- are often difficult to slice. Partially freeze before slicing.

The appliance can also slice e.g. carrots or potatoes in thin slices for chips.

MAINTENANCE AND CLEANING

Before cleaning, always unplug the appliance.

Wipe the inside and outside of the appliance with a paper towel or a soft cloth. It should not be washed in a dishwasher.

Do not clean the inside or outside with any abrasive scouring pad or steel wool as this will damage the finish.

Do not immerse in water or any other liquid.

The blade can be taken off by turning the blade-locking knob.

Caution: the blade is very sharp. After having cleaned the blade, turn the knob anti-clockwise to lock the blade.

Dry all parts well before storage.

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this product in the bin, instead going to the electrical and electronic waste collection centre closest to your home.

We hope that you will be satisfied with this product.

WIR MÖCHTEN UNS BEI IHNEN BEDANKEN, DASS SIE SICH FÜR ZELMER ENTSCHIEDEN HABEN. WIR HOFFEN, DASS DAS PRODUKT ZU IHRER ZUFRIEDENHEIT FUNKTIONIERT.

ACHTUNG

ELIMINAREA PRODUSULUI

EUROGAMA Sp. Z o.o. guarantees compliance of this product for the use for which it is intended for a period of two years. In the case of breakdown during the term of this warranty, users are entitled to repair or else the replacement of the product at no charge if the former is unavailable, unless one of these options proves impossible to fulfill or is disproportionate. In this case, you can then opt for a reduction in price or cancellation of the sale, which must be dealt with directly with the sales vendor. This also covers replacement of spare parts provided that the product has been used according to the recommendations specified in this manual for both cases, and has not been tampered with by any third party that is not authorised by EUROGAMA Sp. Z o.o.. The warranty will not cover any parts subject to wear and tear. This warranty does not affect your rights as a consumer in accordance with the provisions in Directive 1999/44/EC for member states of the European Union.

USE OF WARRANTY

Customers must contact a EUROGAMA Sp. Z o.o. authorised Technical Service for repair of the product. Since any tampering of the same by anyone not authorised by EUROGAMA Sp. Z o.o., or the careless or improper use of the same shall render this warranty null and void. The warranty must be fully completed and delivered along with the receipt or delivery docket for the effective exercise of rights under this warranty. This warranty should be retained by the user as well as the invoice, receipt or the delivery docket to facilitate the exercise of these rights. For technical service and after-sales care outside the Polish territory, please submit your query to the point of sale where you purchased the item or check for further aftersales information at www.zelmer.com

GARANTIE-ERKLÄRUNG