Blaze2 - Headphones Lamax - Free user manual and instructions

Product Type	Wireless Over-Ear Headphones
Brand	Lamax
Model	Blaze2
Dimensions	Approx. 18 x 16 x 8 cm
Weight	Approx. 220 g
Power Source	Built-in rechargeable lithium-ion battery, 400 mAh
Charging Time	About 2 hours via micro USB
Battery Life	Up to 20 hours of music playback
Wireless Connectivity	Bluetooth 5.0, range up to 10 meters
Driver Size	40 mm
Frequency Response	20 Hz – 20 kHz
Impedance	32 Ω
Controls	On-ear buttons for volume, playback, and calls
Microphone	Built-in microphone for hands-free calls
Foldable Design	Yes, for easy storage and portability
Accessories Included	Micro USB charging cable, audio cable (3.5mm), user manual
Maintenance	Wipe with a dry cloth; avoid moisture and extreme temperatures
Safety	Do not disassemble; avoid prolonged high volume to prevent hearing damage
Spare Parts & Repairability	Contact Lamax support for replacement ear pads, cables, and battery service
General Information	Compatible with smartphones, tablets, and laptops with Bluetooth or 3.5mm jack

Frequently Asked Questions - Blaze2 Lamax

How do I pair Blaze2 with my phone?

Turn on the headphones by pressing the power button. The LED will flash blue and red. Enable Bluetooth on your phone and select Lamax Blaze2 from the list. If asked for a PIN, enter 0000.

What is the battery life of Lamax Blaze2?

The battery lasts up to 20 hours of continuous music playback. Charging takes about 2 hours via the included micro USB cable.

Can I use Blaze2 while charging?

Yes, you can use the headphones in wired mode with the included audio cable while charging. In Bluetooth mode, charging is not recommended.

How do I reset my Blaze2 headphones?

If the headphones become unresponsive, press and hold the power button for about 10 seconds until the LED flashes rapidly. This will reset the device.

Are the ear pads replaceable?

Yes, the ear pads are replaceable. Contact Lamax support or check online stores for compatible replacement pads. Replacement instructions are in the manual.

Why is the sound only coming from one side?

This may be due to a loose connection. Check the audio cable if using wired mode, or try re-pairing in Bluetooth. If the issue persists, the driver may be faulty.

Can I connect Blaze2 to a PC?

Yes, you can connect via Bluetooth or the included 3.5mm audio cable. For Bluetooth, ensure your PC supports Bluetooth and pair as with a phone.

How do I clean my Lamax Blaze2 headphones?

Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners. For ear pads, gently dab with a slightly damp cloth and air dry completely.

What should I do if the headphones won't turn on?

First, charge the headphones for at least 30 minutes. If still off, try resetting (hold power button 10 seconds). If no response, contact Lamax support.

Is the microphone noise-cancelling?

The built-in microphone offers basic noise reduction for calls, but it is not a dedicated active noise cancellation (ANC) microphone. Background noise may still be audible.

USER MANUAL Blaze2 Lamax

Line drawing of a hard hat with a circular head and attached straps (no text or symbols)

Controls

On	Hold ➔∥ for 2 seconds
Off	Hold ➔∥ for 2 seconds
Pairing	Hold ➔∥ for 4 seconds
Play / Pause	Press ➔∥
Next / Previous Track	Hold ➔∥ / hold ➔∥
VOL + / VOL -	Press ➔∥ / press ➔∥
Answer / End Call	Press ➔∥
Reject Call	Hold ➔∥ for 3 seconds
Redial the last call	Press ➔∥ twice
Activate Mobile Assistant	Press ➔∥ three times

Turning On

Press ▶▶▶ for 2 seconds to turn on the headphones. This is accompanied by an audible notification and the blue LED lights up.

Pairing

1. To enter the pairing mode, hold the ▶▶|| button for 4 seconds. This is indicated by the LED alternately flashing red and blue.

2. On your device, turn Bluetooth on and locate and select LAMAX Blaze2 in the list of available Bluetooth devices. After successfully pairing, there is an audible notification.

If you have trouble pairing, remove your headphones from the list of paired devices in your smartphone. Turn off the headphones and then hold the [▶▶] button for 4 seconds. The headphones turn on and automatically go into pairing mode. Pair the headphones again as in Step 2 above.

Turning Off

Press and hold the ▶▶II for 2 seconds to turn off the headphones.

Charging

To charge, connect the micro USB cable to the headphones and the other end to the 5V USB charger. The LED lights up red when charging and will turn off when fully charged.

Parameters

Wireless technology	Bluetooth 5.0
Bluetooth range	up to 10 metres
Supported codecs	SBC
Battery capacity	500 mAh
Headphone charging time	2-3 hours
Playback time	up to 35 hours
Weight	145 g

Subject to printing errors.

The latest version of the user guide can be downloaded here:

https://www.lamax-electronics.com/downloads/lamax-blaze2/manual

C

€

V

Ro

H

s

LAMAX Blaze2

Line drawing of a helmet with a circular head and attached clasp (no text or symbols)

Steuerung

https://www.lamax-electronics.com/downloads/lamax-blaze2/manual

CE

RoHS

LAMAX Blaze2

Line drawing of a helmet with a stylized 'A' logo on the side (no text or symbols beyond the label)

Ovládání

https://www.lamax-electronics.com/downloads/lamax-blaze2/manual

CE RoHS

LAMAX Blaze2

Line drawing of a helmet with a circular head and attached strap (no text or symbols)

Ovládanie

Zapnúť	Podržte 12 sekundy
Vypnúť	Podržte 2 sekundy
Párovánie	Podržte 4 sekundy
Hrať / Pauza	Stlačte 11
Nasledujúca / Predchádzajúca skladba	Podržte 1/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/
VOL+ / VOL –	Stlačte 1/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/2/
Prijať / Ukončit hovor	Stlačte 11
Odmietnut’ hovor	Podržte 13 sekundy
Vytočenie posledného hovoru	2x stlačte 11
Aktivácia mobilného asistenta	3x stlačte 11

Zapnutie

https://www.lamax-electronics.com/downloads/lamax-

blaze2/manual

CE RoHS

LAMAX Blaze2

Line drawing of a hard hat with a circular head and attached straps (no text or symbols)

Obstuga

https://www.lamax-electronics.com/downloads/lamax-blaze2/manual

CE RoHS

LAMAX Blaze2

Line drawing of a helmet with a circular head and attached straps (no text or symbols)

Vezérlés

https://www.lamax-electronics.com/downloads/lamax-blaze2/manual

CE RoHS

LAMAX Blaze2

Line drawing of a helmet with a circular head and attached clip (no text or symbols)

Upravljanje

Vklop	Podržite ➔ 2 sekundi
Izklop	Podržite ➔ 2 sekundi
Združitev	Podržite ➔ 4 sekundi
Predvajati / Premor	Pritisnite ➔
Naslednja / Prejšnja skladba	Podržite ➔ / podržite ➔
VOL+ / VOL -	Pritisnite ➔ / pritisnite ➔
Sprejeti / Končati klic	Pritisnite ➔
Zavrniti klic	Podržite ➔ 3 sekundi
Znova pokličite zadnji klic	2× pritisnite ➔
Aktiviranje mobilnega asistenta	3× pritisnite ➔

Vklop

Slušalke prižgete s podržanjem ▶▶II za dve sekundi. Vklop spremlja zvočni signal in modra LED dioda.

Združitev

https://www.lamax-electronics.com/downloads/lamax-blaze2/manual

CE RoHS

LAMAX Blaze2

Line drawing of a helmet with a circular head and attached strap (no text or symbols)

Upravljanje

Uključenje	Držite ➔ 2 sekunde
Isključenje	Držite ➔ 2 sekunde
Uparivanje	Držite ➔ 4 sekundi
Reprodukcija / Stanka	Pritisnite ➔
Sljedeća / Prethodna pjesma	Držite ➔ / držite ➔
VOL+ / VOL -	Pritisnite ➔ / pritisnite ➔
Prihvaćanje / Završavanje poziva	Pritisnite ➔
Odbijanje poziva	Držite ➔ 3 sekundu
Ponovno birajte posljednji poziv	2x pritisnite ➔
Aktivacija mobilnog asistenta	3x pritisnite ➔

Uključenje

https://www.lamax-electronics.com/downloads/lamax-blaze2/manual

CE RoHS