NoiseComfort ANC - Headphones Lamax - Free user manual and instructions

Product Type	Wireless Over-Ear Headphones with Active Noise Cancellation
Brand	Lamax
Model	NoiseComfort ANC
Connectivity	Bluetooth 5.0
Bluetooth Range	Up to 10 meters (33 feet)
Supported Audio Codecs	AAC, SBC
Active Noise Cancellation	Yes (ANC button)
ANC Performance	Suppresses deep frequencies; human voices and high frequencies minimally suppressed
Battery Capacity	1050 mAh
Charging Time	3 hours via USB-C
Playback Time (ANC off)	Up to 50 hours
Playback Time (ANC on)	Up to 26 hours
Weight	260 g (9.2 oz)
Controls	Multifunction button, Volume +/-, ANC button
Voice Assistant Activation	Double press multifunction button
Audio Cable Use	ANC cannot be activated when audio cable connected
LED Indicators	Red (charging), Blue (fully charged, pairing), Green (ANC on)
Pairing Mode	Automatic on first power-on; manual by holding power button 5 seconds
Charging Port	USB-C
Microphone	Built-in for calls
Cleaning	Wipe with a soft, dry cloth
Safety	Use only 5V USB charger; do not expose to water or extreme temperatures

Frequently Asked Questions - NoiseComfort ANC Lamax

How do I turn on the Lamax NoiseComfort ANC headphones?

Press and hold the multifunction button for 2 seconds until an audible notification and the blue LED lights up.

How do I pair them with my phone?

Turn on the headphones; they enter pairing mode automatically the first time (LED flashes red/blue). On your phone, select 'LAMAX NoiseComfort ANC'. If pairing fails, remove the headphones from paired devices, turn them off, then hold the power button for 5 seconds to enter pairing mode again.

How do I activate Active Noise Cancellation?

Press the ANC button. The green LED near the charging connector lights up. Press again to deactivate. Note: ANC cannot be activated if an audio cable is connected.

How long does the battery last?

Playback time is up to 50 hours with ANC off and up to 26 hours with ANC on.

How do I charge the headphones?

Connect the USB-C cable to the headphones and a 5V USB charger. The LED is red while charging and turns blue when fully charged. Charging time is approximately 3 hours.

Can I use the headphones while charging?

The manual does not specify if the headphones can be used while charging. For safety, it is generally recommended to avoid using them during charging.

How do I control volume and tracks?

Press the + or - buttons for volume. Hold the + button for next track and hold the - button for previous track.

How do I answer or reject calls?

Press the multifunction button to answer or end a call. Hold the multifunction button for 1 second to reject an incoming call.

How do I activate the voice assistant?

Double press the multifunction button to activate your phone's voice assistant (e.g., Siri, Google Assistant).

What should I do if the headphones don't pair?

Remove the headphones from the list of paired devices on your phone. Turn off the headphones, then press and hold the power button for 5 seconds until the LED flashes red and blue. Then pair again as usual.

USER MANUAL NoiseComfort ANC Lamax

Line drawing of a pair of headphones with earbuds and buttons (no text or symbols)

Controls

On	Hold 🎨 for 2 seconds
Off	Hold 🎨 for 5 seconds
Activate ANC	Press ANC
Play / Pause	Press 🎨
Next / Previous Track	Hold + / hold 📊
VOL + / VOL -	Press + / press 📊
Answer / End Call	Press 🎨
Reject Call	Hold 🎨 for 1 second
Activate Mobile Assistant	Press 🎨 twice

Turning On

Press ⬆ for 2 seconds to turn on the headphones. This is accompanied by an audible notification and the blue LED lights up.

Pairing

1. The headphones automatically go into pairing mode the first time you turn them on. This is indicated by the LED alternately flashing red and blue.

2. On your device, turn Bluetooth on and locate and select LAMAX NoiseComfort ANC in the list of available Bluetooth devices. After successfully pairing, there is an audible notification.

If you have trouble pairing, remove your headphones from the list of paired devices in your smartphone. Turn off the headphones and then hold the ⬆ button for 5 seconds. The headphones turn on and automatically go into pairing mode. Pair the headphones again as in Step 2 above.

Active Noise Cancellation (ANC)

Press the ANC button to turn ANC on. When ANC is on, the green LED next to the charging connector is lit. To turn off ANC, press the ANC button again:

The ANC function cannot be activated if an audio cable is connected.

ANC especially suppresses deeper frequencies. Human voices and higher frequencies are minimally suppressed.

Turning Off

Press and hold the ⬆ for 5 seconds to turn off the headphones.

Charging

To charge, connect the USB-C cable to the headphones and the other end to the 5V USB charger. The LED lights up red when charging and blue when fully charged.

Parameters

Wireless technology	Bluetooth 5.0
Bluetooth range	up to 10 metres
Supported codecs	AAC, SBC
Battery capacity	1050 mAh
Headphone charging time	3 hours
Playback time	up to 50 hours
Playback time with ANC	up to 26 hours
Weight	260 g

Subject to printing errors.

The latest version of the user guide can be downloaded here:

https://www.lamax-electronics.com/downloads/

lamax-noisecomfortanc/manual

CE RoHS

LAMAX NoiseComfort ANC

Line drawing of a pair of headphones with earbuds and buttons (no text or symbols)

Steuerung

https://www.lamax-electronics.com/downloads/

lamax-noisecomfortanc/manual

CE RoHS

LAMAX NoiseComfort ANC

Line drawing of a pair of headphones with earbuds and buttons (no text or symbols)

Ovládání

Line drawing of a pair of headphones with earbuds and buttons (no text or symbols)

Ovládanie

https://www.lamax-electronics.com/downloads/

lamax-noisecomfortanc/manual

CE RoHS

LAMAX NoiseComfort ANC

Line drawing of a pair of headphones with earbuds and buttons (no text or symbols)

Obsługa

Line drawing of a pair of headphones with earbuds and buttons (no text or symbols)

Vezérlés

Line drawing of a pair of headphones with earbuds and buttons (no text or symbols)

Upravljanje

Vklop	Podržite ⋯ 2 sekundi
Izklop	Podržite ⋯ 5 sekund
Aktiviranje ANC	Pritisnite ANC
Predvajati / Premor	Pritisnite ⋯
Naslednja / Prejšnja skladba	Podržite + / podržite 1
VOL+ / VOL -	Pritisnite + / pritisnite 1
Sprejeti / Končati klic	Pritisnite ⋯
Zavrniti klic	Podržite ⋯ eno sekund
Aktiviranje mobilnega asistenta	2× pritisnite ⋯

Vklop

Line drawing of a pair of headphones with earbuds and buttons (no text or symbols)

Upravljanje