Tips1 - Headphones Lamax - Free user manual and instructions

Product Type	Wireless On-Ear Headphones
Brand	Lamax
Model	Tips1
Dimensions	Approx. 175 x 155 x 60 mm
Weight	Approx. 150 g
Connectivity	Bluetooth 5.0
Wireless Range	Up to 10 m
Driver Size	40 mm
Frequency Response	20 Hz - 20 kHz
Impedance	32 Ω
Battery Type	Rechargeable Li-Ion, 300 mAh
Playback Time	Up to 15 hours
Charging Time	Approx. 2 hours
Charging Port	Micro USB
Controls	Multifunction button, volume +/-, play/pause, answer call
Microphone	Built-in
Color Options	Black, White, Blue
Earpad Material	Memory foam with leatherette
Headband Adjustment	Adjustable, padded
Folding Design	Yes, foldable for storage
Cleaning Instructions	Wipe with a soft, dry cloth. Do not use liquid cleaners.
Safety Notes	Do not expose to extreme temperatures or moisture. Keep away from children.

Frequently Asked Questions - Tips1 Lamax

How do I pair the Lamax Tips1 with my phone?

Turn on the headphones by holding the power button until LED flashes. Enable Bluetooth on your phone and select 'Lamax Tips1' from the list. If prompted, enter 0000. The headphones will connect automatically after initial pairing.

How long does the battery last and how do I charge it?

The battery lasts up to 15 hours on a full charge. To charge, connect the included Micro USB cable to the charging port and a power source. A full charge takes about 2 hours. The LED turns red during charging and blue when fully charged.

Can I use the headphones while they are charging?

Yes, you can use the headphones in wired mode (if available) or Bluetooth mode while charging, but it may extend charging time. The headphones will continue to play audio from a connected device.

What should I do if the headphones will not connect?

Make sure the headphones are in pairing mode (LED flashing). Try resetting the headphones by turning them off and on again. Delete the device from your phone's Bluetooth list and re-pair. Ensure the battery is not depleted.

How do I answer or end a call?

Press the multifunction button once to answer an incoming call. Press again to end the call. To reject a call, hold the button for 2 seconds until a tone sounds.

Can I control music playback?

Yes, press the multifunction button once to play or pause music. Use the volume +/- buttons to adjust volume. For next track, hold the volume + button; for previous track, hold the volume - button.

Are the headphones waterproof?

No, the Lamax Tips1 is not waterproof or water-resistant. Avoid exposure to rain, sweat, or moisture. Do not immerse in water.

How do I clean and maintain the headphones?

Use a soft, dry cloth to wipe the exterior. For earpads, gently wipe with a slightly damp cloth and let air dry completely. Do not use alcohol, solvents, or abrasive cleaners.

What is the warranty period?

The Lamax Tips1 typically comes with a 1-year warranty against manufacturing defects. Keep your purchase receipt for service. Contact Lamax support for warranty claims.

Are spare parts available?

Spare earpads and charging cables may be available from Lamax or third-party sellers. Contact customer support for replacements. The battery is not user-replaceable.

USER MANUAL Tips1 Lamax

1 Micro USB Charging Port

2 - Button

3 Multifunction Button

4 Microphone

5 LED Indicate

5 LED indic 6 Button

6 + Button

Controls

Power On / Off	Press and hold the multifunction button
Pairing Mode	Press and hold the multifunction button until the blue and red LEDs blink alternately
Play / Pause	Press the multifunction button
Next Track	Press and hold +
Previous Track	Press and hold -
Increase Volume	Press + repeatedly
Decrease Volume	Press - repeatedly
Accept / End Call	Press the multifunction button
Reject Call	Press and hold the multifunction button for 1 second
Last Number Redial	Double tap the multifunction button
Turn Siri or Google Assistant On / Off	While playing music or in standby mode, press and hold the multifunction button for a second

LED Indicators

Charging	Red LED lights up
Fully-charged	Blue LED lights up
Low Battery	Red LED blinks
Pairing Mode	Blue and red LEDs blink alternately
Successfully Paired	Blue LED blinks every 4 seconds
Power On	Press and hold the multifunction key until the blue LED blinks
Power Off	Press and hold the multifunction key until the red LED blinks

Pairing

Power on the earphones and enter pairing mode. Then, activate Bluetooth on your device and search for new devices. Select „LAMAX Tips1“ from the list of found devices. When pairing is successful, the blue LED on the earphones blinks every 4 seconds.

To connect to two devices at the same time, firstly pair the earphones with the first device. Then switch off the earphones and turn off Bluetooth on the paired device. Turn the earphones on again, put into pairing mode and pair with the second device. Then turn Bluetooth on again on the first device.

Charging

To charge, connect the cable to the Micro USB port on the earphone in-line controls and plug the other end of the cable into a USB power supply with a maximum voltage of 5 V. While charging, the red LED lights up on the headphones. When fully-charged, the blue LED lights up. The device must be charged under constant supervision.

Main Features

- Reliable wireless transmission with Bluetooth 4.2

- Perfectly balanced and clear sound

- Control music and calls directly on the earphones

- Elegant ultralight design

- Handsfree calls

- Multipoint pairing with two devices at the same time

- 3 earbud tips included

Parameters

Wireless Technology	Bluetooth 4.2
Max. Pairing Range	up to 10 metres
Earphone Battery	60 mAh LiPo
Earphone Charging Time	about 1.5 hours
Playback Time	up to 5 hours
Standby Time	up to 100 hours
Frequency Range	20 Hz – 20 kHz
Impedance	16 ± 15 % Ohm
Driver Size	10 mm
Headphone Weight	10 g

Print errors reserved.

Download the latest version of the User Manual here: http://beat.lamax-electronics.com/Tips1/manuals

CE RoHS

LAMAX Tips1

1 Micro-USB-Ladeport

2 Taste

1. Multifunktionstaste

4 Mikrofon

4 Mikrolon 5 LED A

5 LED-Anzeige

6 Taste +

Bedienung

4 Mikroion 5 LED in light

5 LED indika

6 Placitko +

Ovládání