Spire1 - Headphones Lamax - Free user manual and instructions

Product Type	Wireless Over-Ear Headphones
Brand	Lamax
Model	Spire1
Connectivity	Bluetooth 5.0
Wireless Range	Up to 10 meters
Battery Life	Up to 20 hours
Charging Time	Approximately 2 hours
Charging Port	USB-C
Driver Size	40 mm
Frequency Response	20 Hz - 20 kHz
Impedance	32 Ω
Weight	180 g
Dimensions (folded)	185 x 165 x 80 mm
Microphone	Built-in, for hands-free calls
Controls	Multi-function button, volume +/-
Foldable Design	Yes, for portability
Noise Isolation	Passive noise isolation
Compatible With	Smartphones, tablets, laptops
What's in the Box	Headphones, USB-C cable, user manual
Cleaning	Wipe with dry cloth, avoid liquids
Safety	Keep away from heat sources; do not disassemble
Repairability	Contact authorized service center for repairs

Frequently Asked Questions - Spire1 Lamax

How do I pair my Lamax Spire1 headphones with a device?

Turn on the headphones by holding the power button until the LED flashes blue and red. Then enable Bluetooth on your device and select 'Lamax Spire1' from the list. If prompted, enter '0000' as the PIN.

How do I reset the headphones to factory settings?

With the headphones on, press and hold the volume up and down buttons simultaneously for about 5 seconds until the LED flashes red three times. The headphones will restart and be ready to pair.

How can I check the battery level?

When the headphones are connected to a device, the battery level may be displayed on the device's screen. Alternatively, a low battery warning tone will sound when the battery is low.

Are the Lamax Spire1 headphones water-resistant?

No, the Spire1 headphones are not water-resistant. Avoid exposure to rain, sweat, or moisture to prevent damage.

How do I charge the headphones?

Connect the included USB-C cable to the charging port on the headphones and plug the other end into a USB power source (e.g., a computer or wall charger). The LED will turn red during charging and blue when fully charged.

Can I use the headphones while charging?

Yes, you can use the headphones in wired mode while charging. However, wireless playback is not possible during charging.

Is there a companion app for the Spire1?

No, the Lamax Spire1 headphones do not have a dedicated companion app. All functions are controlled via the physical buttons on the headphones.

Do the headphones have active noise cancellation?

No, the Spire1 uses passive noise isolation provided by the over-ear design to reduce ambient noise, but it does not have active noise cancellation technology.

What is the warranty period for the Lamax Spire1?

Lamax typically offers a 2-year warranty for headphones. Check your local retailer for exact terms and conditions.

How should I clean and maintain my headphones?

Wipe the ear cups and headband with a soft, dry cloth. Do not use liquids or abrasive cleaners. Store the headphones in a cool, dry place when not in use.

USER MANUAL Spire1 Lamax

Carefully plug the cable into the device, which is equipped with a 3.5mm audio input. Use only reasonable force to avoid damage to the device or headphones.

Control key functions

Single key press Starts / Pauses playback

Handsfree functions on the controller

Tap key Answer or reject incoming call

Long key press (cca 3s) Reject call (voice mail)

Technical Specifications

Cable Length 120 cm

Jack 3,5 mm

Audio Resistance 16 Ohm

Frequency 20 Hz – 22 000 Hz

Sensitivity 105 dB +/- 3 dB

Operating the device safely

1. Please read the enclosed safety instructions carefully.

2. Improper handling of the headphones (excessive bending of the cable,

for example when carrying in the pocket) can cause irreversible damage.

1. Printing errors reserved.

The latest version of the user guide can be downloaded here: https://beat.lamax-electronics.com/spire1/manuals

CE RoHS

LAMAX

SPIRE1