IAN 336846 - Uncategorized Livarno Lux - Free user manual and instructions

Product Type	LED Under-Cabinet Light with Adjustable Light Colour
Model Number	14139304L / 14139306L (IAN 336846)
Operating Voltage	230-240 V ~ 50 Hz
Rated Power	6.8 W (LED module 6 W)
Protection Class	II
Protection Type	IP20
Light Colour Adjustment	2 levels: Warm white (Level I) and Cold white (Level II)
Max. Connectable Units	Up to 10 lights of the same type
Mounting Type	Under-cabinet wall mounting with screws and dowels
Swivel Feature	Swivel-mounted light strip for adjustable direction
LED Replaceability	Not replaceable; entire light must be replaced if LED fails
Dimmable	No, must not be used with dimmer or electronic switch
Indoor Use Only	Yes, for dry and enclosed spaces
Cleaning Instructions	Wipe with a dry, lint-free cloth; do not use water or solvents
Warranty	36 months from date of purchase
Certification	CE compliant

Frequently Asked Questions - IAN 336846 Livarno Lux

How do I install the LED under-cabinet light?

Measure and mark the drilling points, drill holes (∅6 mm, depth 40 mm), insert wall plugs, and attach the light using the mounting holes. Then connect the power cable and plug into a socket. Ensure the light is switched off during installation.

Can I connect multiple lights together?

Yes, you can connect up to 10 lights of the same model (14139304L/14139306L) using the included connection cable. Ensure the distance between lights is between 10 cm and 15 cm. Always connect all lights with the connection cable before plugging into the mains.

How do I change the light colour?

Use the ON/OFF switch: Level I gives warm white, Level II gives cold white. The centre position switches the light off.

Is the light dimmable?

No, the light is not dimmable. Do not operate it with a dimmer or electronic switch as this is not suitable and may cause damage.

Can I use this light outdoors?

No, this light is only suitable for indoor use in dry and enclosed spaces. It has IP20 protection, meaning it is not protected against water or moisture.

What should I do if the LED fails?

The LED module is not replaceable. If the light stops working, the entire unit must be replaced. Please contact the service centre for a replacement.

How do I clean the light?

Always unplug the light first. Allow it to cool down completely. Then wipe with a dry, lint-free cloth. Never use water, solvents, or immerse the light in liquid.

What is the warranty period?

The warranty is 36 months from the date of purchase. It covers material and manufacturing defects but not wear parts or damage from improper use.

What tools are needed for installation?

You will need a pencil, screwdriver, electric drill with a 6 mm drill bit, spirit level, and measuring tape. The light comes with dowels, screws, and a connection cable.

How many lights can be daisy-chained together?

You can connect a maximum of 10 lights of the same type in a chain. Ensure the total distance between adjacent lights is no more than 15 cm and no less than 10 cm.

USER MANUAL IAN 336846 Livarno Lux

Close-up of a cylindrical electronic device with a metallic cable extending from its tip (no visible text or symbols)

Pure mechanical component illustration without any text, numbers, or symbols

LED UNDER-CABINET LIGHT WITH ADJUSTABLE LIGHT COLOUR

GB

LED UNDER-CABINET LIGHT WITH ADJUSTABLE LIGHT COLOUR

Operation and safety notes

SI

PODELEMENTNA LED-SVETILKA Z IZBIRO BARVNEGA TONA

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

HU

GB Operation and safety notes Page 5

List of pictograms used....Page 6

Introduction......Page 6

Proper use....Page 6

Included items Page 7

Description of parts....Page 7

Technical data......Page 7

Safety Page 7

Safety advice......Page 7

Preparation......Page 8

Required tools and materials....Page 8

Preparations for use....Page 9

Fitting the light Page 9

Connecting several lights together....Page 9

Changing the light colour....Page 9

Switching On/Off......Page 9

Directing the light....Page 9

Maintenance and cleaning......Page 10

Disposal Page 10

Warranty and service......Page 10

Warranty Page 10

Declaration of Conformity....Page 10

Manufacturer / Service Page 10

List of pictograms used
	Read the instructions!		Electric shock warning!Danger to life!
	This light is only suitable for indoor use in dry and enclosed spaces.		For your safety
	Alternating current/voltage		Caution! Risk of burns due to hot surfaces!
	Hertz (frequency)		Dispose of the packaging and device in an environmentally-friendly manner!
	Watt (effective power)		Danger to life and risk of accidents for infants and children!
	Safety class II		Switching cycles
	Operating life		Observe the warnings and safety notices!
	Do not operate this light with a dim-mer or an electronic switch. It is not suitable for this mode of operation.		The packaging is made from 100% recycled paper.
V	Volt

LED Under-Cabinet Light with Adjustable Light Colour

Please keep these instructions in a safe place and hand them on to a third party if necessary.

- Introduction

Congratulations on your new product. You have selected a high quality product. Please read carefully and completely

through these operating instructions. Fold out the page with the illustrations. These instructions form part of the product and contain important information about bringing the product into use and its handling. Always observe all the safety advice. Check that the correct mains voltage is available and that all the parts have been properly assembled before bringing into use. Should you have any questions or be uncertain as to how to operate the device, please get in touch with your dealer or service point.

• Proper use

This light is suitable only for interior use, in dry and enclosed spaces. The light should be positioned within reach so

that the switch can be operated conveniently. The light can be fitted to all normally inflammable surfaces. Any use other than that described above or modification to the lamp is not permitted and may lead to damage to people or property. Moreover, there is the risk of injury or loss of life and that the lamp may develop technical faults such as short circuit or fire or give an electric shock. This lamp is intended for use only in a domestic environment. This product is intended for normal operation.

Included items

Check that all the items and accessories are present and that the lamp is in perfect condition immediately after unpacking.

1 LED Under-Cabinet Light with Adjustable Light Colour, Model 14139304L/14139306L
1 Power cable
1 Connection cable
2 Dowels
2 Screws
1 Operating instructions

• Description of parts

1 Mounting holes for wall fastening
2 Light connector socket
3 Mains cable
4 Mains plug
5 ON/OFF switch
6 Connection socket
7 Protective cap
8 Connection cable
9 Lamp housing
10 Wall plug
11 Mounting holes for base fastening
12 Swivel-mounted light strip

- Technical data

Lamp:

Item number: 14139304L/14139306L

Operating voltage: 230-240V \~ 50Hz

Rated power: LED, 6.8 W

Protection class: II/

Protection type: IP20

LED:

Illuminant: LED module

Rated power: 6 W

● Safety

Safety advice

The right to claim under the guarantee shall be rendered invalid in respect of damage caused by the non-observance of these operating instructions.

No liability is accepted for consequent damage. No liability is accepted for damage to property or persons caused by improper handling or non-observance of the safety advice.

■ DANGER TO LIFE AND

ACCIDENT HAZARD FOR TODDLERS AND SMALL CHILDREN!

Never leave children unsupervised with the packaging material. The packaging material poses a suffocation hazard. Children frequently underestimate the dangers. Always keep children away from the product.

This device may be used by children age 8 years and up, as well as by persons with reduced physical, sensory or mental capacities, or lacking experience and/or knowledge, so long as they are supervised or instructed in the safe use of the device and understand the associated risks. Do not allow children to play with the product. Cleaning and user maintenance must not be performed by children without supervision.

To avoid danger to life from electric shock

Before connecting it to the mains, always check the light, the power cable as well as the connecting cable if need be for any damage.

Never use the light if you see any damage.

WARNING!

Damaged power cables and connecting cables are a danger to life as you could suffer an electric shock.

Before assembly, ensure that the mains voltage available corresponds to the operating voltage necessary of the light (see „Technical data“).

■ Never let the lamp come into contact with water or other liquids.
■ Never open or insert anything into electrical fittings or equipment. Doing this sort of thing can lead to a serious danger to life from electric shock.
- Touch only the insulated part of the plug when connecting to or disconnecting from the mains supply.
The lamp's illuminant is not replaceable. The entire lamp needs to be replaced if the illuminant reaches the end of its service life.
If the external flexible cable of this lamp is damaged, it may only be replaced by a special cable or a cable that is only available from the manufacturer or his service representative.
■ Only connect the under-cabinet light to the mains current using the original power cable.
■ Only connect original under-cabinet lights of the same type (Model 14139304L / 14139306L) with each other. Only use the original connecting cable supplied to do so.
- Connect the under-cabinet lights that are linked up together to one socket only. Make sure that you only connect a maximum of 10 linked-up under-cabinet lights of the same type to one socket. Otherwise this might overload the connections and cables.
- Please ensure all under-cupboard lamps have been connected with the connection lead before connecting the mains plug to the mains socket.

Prevent fire and injury hazards

RISK OF INJURY!

Immediately after unpacking check each light and the lamp glass for damage. Do not operate the lamp with defective bulbs and/or defective lamp glass. In this case, contact the service centre for a replacement.

RISK OF BURNS!

To prevent burns, be sure the light is switched off and has cooled down before touching it. The illuminants become very hot.

This product does not contain any parts that can be serviced by the user.
- Do not look into the LED from a close distance during operation. Do not look at the LED with an optical instrument (e.g. magnifying glass).
Do not operate this light with a dim-mer or an electronic switch. It is not suitable for this mode of operation.

Working safely

■ Fit the light in such a way to ensure it is protected from damp and dirt.
■ Make careful preparations for the assembly and take sufficient time. Clearly lay out all components and any additional tools or materials that might be required so that they are readily to hand.
- Remain alert at all times and always watch what you are doing. Always proceed with caution and do not assemble the lamp if you cannot concentrate or feel unwell.

● Preparation

- Required tools and materials

The tools and materials mentioned are not included in the delivery. The details and values given are non-binding and for guidance only. The nature of the material depends on the individual circumstances on site.

• Pencil / Marking tool
• Screwdriver
• Electric drill
• Drill (∅ 6 mm)
• Spirit level
• Measuring tape

● Preparations for use

- Fitting the light

Note: Prior to installation, verify there is a socket nearby within reach of the included power cable 3.

Note: The light can be adjusted to 2 light levels using the ON / OFF switch 5.

1. Measure up the wall or mounting surface for drilling the holes. Use a spirit level to improve accuracy.
2. Mark the distance for the mounting holes 1 or 11.
3. Now drill the mounting holes (ø approx. 6 mm, depth approx. 40 mm). Make sure that you do not damage any electrical cables during this operation.
4. Insert the supplied wall plugs 10 into the drilled holes. Insert the supplied screws into the wall plugs 10 and tighten them, stopping when they project about 3 mm out of the wall or mounting surface (fig. A).
5. Attach the light using the appropriate mounting holes 11 or 1 to the screws.
6. When you have attached the light above the assembly holes 11, slide the light housing 9 to the left until it clicks into place.
7. Insert the light connector plug of the mains lead 3 into the light connector socket 2.
8. Insert the mains plug of the mains lead 4 into a convenient mains socket. Your light is now ready for operation.

- Connecting several lights together

CAUTION!

Please ensure all under-cupboard lamps have been connected with the connection cable 8 before connecting the mains plug 4 to the mains socket.

Note: Make sure that you only connect a maximum of 10 linked-up under-cabinet lights of the same type to one socket.

☐ Install up to 10 lights of the same model next to each other. To do so, follow steps 1-5 of the section called "Fitting the light".

Note: Make sure that the distance between the lights is not more than 15 cm.

Note: Make sure that the distance between the lights is not less than 10 cm.

☐ Remove the protective head guard 7.
☐ Insert the connecting cable 8 into the connecting socket 6 of the light.
☐ Insert the second connection of the connecting cable 8 into the socket 2 of the other light.
☐ Insert the connection of the power cable 3 into the socket 2 of the outer, left-hand light.
☐ Connect the mains plug 4 to the mains socket. Your lights are now ready for operation.

- Changing the light colour

☐ To change the light colour, set the ON / OFF switch 5 to the different levels.

• Level I = Warm white
• Level II = Cold white

- Switching On/Off

☐ Switch the ON / OFF switch 5 to turn the light on or off.
☐ Move the ON / OFF switch 5 to the centre position to switch the light off.

- Directing the light

□ Never change the direction of the light while it is switched on.

RISK OF BURNS!

To prevent burns, be sure the light is switched off and cooled down before touching it. The illuminants become very hot.

☐ Allow the light to cool down completely.
☐ Turn the strip light 12 into the desired direction.

● Maintenance and cleaning

WARNING! DANGER OF ELECTRIC SHOCK!

To do this pull the mains plug on the mains lead 4 out of the socket.

WARNING! DANGER OF ELECTRIC SHOCK!

For reasons of electrical safety, the light must never be cleaned with water or other fluids or be immersed in water. When cleaning, only use a dry, lint-free cloth.

• Do not use solvents, benzene or similar substances. They could damage the light.
  ☐ Allow the lamp to cool down completely.

- Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7: plastics / 20–22: paper and fibre-board / 80–98: composite materials.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

The packaging is made from 100 % recycled paper.

- Warranty and service

Warranty

You receive a 36 month warranty on this product, valid from the date of purchase.

The device has been carefully produced under strict quality control.

Within the warranty period we shall rectify without charge all material and manufacturing defects. In the event of a defect arising during the warranty period, please send the device to the listed Service Centre address, making reference to the following article number: 14139304L/14139306L.

Wear parts (such as bulbs) and damage caused by improper handling, non-observance of the operating instructions or unauthorised interference are excluded from the warranty.

The performance of services under the warranty does not extend or renew the warranty period.

- Declaration of Conformity CE

This product conforms to the requirements of the applicable European and national directives. Conformity has been demonstrated. The relevant declarations and documents are held by the manufacturer.

• Manufacturer / Service

When inquiring about your product, please have your receipt and product number (e.g. IAN

123456_7890) ready as your proof of purchase.

Pooblaščeni serviser: