EH-NA63 - Hair dryer PANASONIC - Free user manual and instructions
Find the device manual for free EH-NA63 PANASONIC in PDF.
| Product Type | Hair Dryer |
| Brand | Panasonic |
| Model | EH-NA63 |
| Technology | nanoe™ and mineral ions |
| Power | 1700 - 2000 W (depending on voltage) |
| Supply Voltage | 220-240 V ~ 50-60 Hz |
| Temperature Settings | 4 positions: very hot, hot, warm, cold |
| Airflow Settings | 3 positions: turbo, drying, styling + off |
| Cold Air Mode | Yes, hold button |
| nanoe™ Charge Panel | Yes, on the handle |
| Styling Nozzle | Included |
| Diffuser | Included |
| Quick Dry Nozzle | Not included (EH-NA65 model only) |
| Overheat Protection | Yes, automatic switch to cold air |
| Removable Filter | Yes, monthly cleaning recommended |
| nanoe™ Outlet Maintenance | Moist cotton swab, clean the electrode |
| Usage | Household only |
| Included Accessories | Styling nozzle, diffuser |
| Cable Type | Power cord, do not wrap |
| Safety Instructions | Do not use near water, unplug after use |
Frequently Asked Questions - EH-NA63 PANASONIC
User questions about EH-NA63 PANASONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Hair dryer in PDF format for free! Find your manual EH-NA63 - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EH-NA63 by PANASONIC.
USER MANUAL EH-NA63 PANASONIC
Operating Instructions
(Household use) Hair Dryer
EH-NA65
Model No.
EH-NA63
nanoe™
| English | 3 | Dansk | 87 | Česky | 171 |
| Deutsch | 17 | Português | 101 | Slovensky | 185 |
| Français | 31 | Norsk | 115 | Magyar | 199 |
| Italiano | 45 | Svenska | 129 | Română | 213 |
| Nederlands | 59 | Suomi | 143 | Türkçe | 227 |
| Español | 73 | Polski | 157 |
Panasonic®
Operating Instructions
(Household use) Hair Dryer
EH-NA65
Model No. EH-NA63
Contents
Safety precautions...... 6 Maintenance of the hair dryer ......11
Parts identification ....10 Troubleshooting ....14
How to use the hair dryer .....10 Specifications .....15
About nanoe™ .....11
Thank you for purchasing this Panasonic product.
Before operating this unit, please read these instructions completely and save them for future use.
3
Warning
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- When the hair dryer is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hair dryer is switched off.
- For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
- This symbol with prohibition sign in red on the appliance means “Do not use this appliance near water”. Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
English
nanoe™ is a trademark of Panasonic Corporation. A nanoe™ is a nano-sized ion particle coated with water particles.
Safety precautions
To reduce the risk of injury, loss of life, electric shock, fire, and damage to property, always observe the following safety precautions.
Explanation of symbols
The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.
WARNING
Denotes a potential hazard that could result in serious injury or death.
CAUTION
Denotes a hazard that could result in minor injury or property damage.
The following symbols are used to classify and describe the type of instructions to be observed.
This symbol is used to alert users to a specific operating procedure that must not be performed.
This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safely.
Some parts of the safety precaution illustrations differ from the actual product.
WARNING
▶ Plug and Cord
Do not use with the cord bundled.
- Doing so may cause fire or electric shock.
Do not damage the cord or plug.
- Do not deface, modify, forcefully bend or pull the cord or plug. Also, do not place anything heavy on, twist or pinch the cord.
- Doing so may cause electric shock, burn, or fire due to a short circuit.
Do not use when the plug or cord is damaged or hot.
- Doing so may cause burn, electric shock, or fire due to a short circuit.
Never use the appliance if the plug fits loosely in a household outlet.
- Doing so may cause burn, electric shock, or fire due to a short circuit.
Do not connect or disconnect the plug to a household outlet with a wet hand.
- Doing so may cause electric shock or injury.
Do not wrap the cord tightly around the main body when storing.
- Doing so may cause the wire in the cord to break with the load, and may cause electric shock, burn, or fire due to a short circuit.
Do not store or use the cord in a twisted state.
- Doing so may cause the wire in the cord to break with the load, leading to electric shock or fire due to a short circuit.
WARNING
Disconnect the plug by holding onto it instead of pulling on the cord.
- Failure to do so may cause the wire in the cord to break, and may cause burn, electric shock, or fire due to a short circuit.
Regularly clean the plug to prevent dust from accumulating.
- Failure to do so may cause fire due to insulation failure caused by humidity. Disconnect the plug and wipe with a dry cloth.
Always turn off the power switch and disconnect the plug from the household outlet after use. - Failure to do so may cause fire or burn.
Insert the plug into the household outlet directly: Do not use with an extension cord.
Fully insert the plug. Always ensure the appliance is operated on an electric power source matched to the rated voltage indicated on the appliance.
- Failure to do so may cause fire or electric shock.
▶ In case of an abnormality or malfunction Immediately stop using and remove the plug if there is any abnormality or malfunction.
- Failure to do so may cause fire, electric shock, or injury.
• Air is not emitted
- Unit stops sporadically
- Interior becomes red hot and smoke is emitted
- Immediately request inspection or repair at an authorized service center.
▶ Maintenance
When you see sparks around the air outlet while using the hot air setting, stop use and remove the lint on the air outlet and air inlet.
- Failure to do so may cause burn or fire.
▶This appliance
Do not block or insert hair pins or other foreign objects into the air inlet, air outlet, or nanoe™ outlet. Doing so may cause fire, electric shock, or burn.
WARNING
Do not leave the area with the power switch left on.
Doing so may cause fire.
Do not store the appliance in a bathroom or location with high humidity. Also, do not place in a location where water may spill (such as top of vanity).
Doing so may cause electric shock or fire.
Do not keep within the reach of children. Do not let them use the appliance.
Doing so may cause burn, electric shock, or injury.
Do not use in proximity of flammable materials (such as alcohol, benzine, thinner, spray, hair care product, nail polish remover).
Doing so may cause an explosion or fire.
Do not immerse the appliance in water. Do not use this appliance near water.
Doing so may cause electric shock or fire.
Never modify, disassemble, or repair.
Doing so may cause ignition or injury due to abnormal operation.
Contact an authorized service center for repair.
Do not use the appliance with a wet hand.
- Doing so may cause electric shock or fire due to a short circuit.
This appliance is not designed for commercial use, and is not intended for use without appropriate maintenance.
- Doing so may cause burn or fire due to a continuous load or overload.
CAUTION
▶ To protect your hair
Do not use with the air inlet damaged.
- Your hair may get tangled in the air inlet, which could damage the hair.
Be sure to keep a distance of over 3 cm between the air outlet and your hair.
- Failure to do so may cause burns to the hair.
Be sure to keep your hair at least 10 cm away from the air inlet.
- Your hair may get tangled in the air inlet, which could damage the hair.
▶ Note the following precautions
Do not drop or subject to shock.
- Doing so may cause electric shock or ignition.
Only use for drying or styling human hair.
(Do not use on pets, or to dry clothing, shoes, etc.)
- Doing so may cause fire or burn.
Do not use on children or infants.
- Doing so may cause burn.
Do not touch the air outlet, set nozzle, quick-dry nozzle (EH-NA65 only), and diffuser, which will become very hot.
- Doing so may cause burn.
Do not look into the air outlet while in use.
- The hair dryer blows air with dust, etc., possibly resulting in injury.
Never use the appliance with the filter removed.
- Your hair may get tangled in the air inlet, which could damage the hair.
Do not wash the filter in water.
- Doing so may cause fire or electric shock.
Notes
- This appliance is equipped with an automatic overheating protective device. If the appliance overheats, it will switch to cold air mode. Switch off the appliance and unplug it from the household outlet. Allow it to cool down for a few minutes before using it again. Check that no fluff, hair etc. is in the air inlets and outlets before switching it on again.
- You may notice a characteristic odor when using this appliance. This is caused by the ozone it generates and is not harmful to the human body.
Parts identification
A Air outlet
B Set nozzle
C nanoe™ outlet
D nanoe™ lamp
E Cool-shot button
F Handle
G Ring for hanging
H Cord
I Power plug
J Temperature selector ( | )
●: Hot (Hot air) ● : Warm (Warm air) ● : Healthy (Mild air) • : Cool (Cool air)
K Power switch (5)
3: Turbo (Very strong airflow) 2: Dry (Strong airflow) 1: Set (Gentle airflow) 0: Off
Air inlet grille
M Filter
Make sure to attach the filter to the air inlet when using the hair dryer.
N nanoe™ charge panel Quick-dry nozzle (EH-NA65 only) P Diffuser
▶ Quick-dry nozzle (EH-NA65 only)
For drying hair quickly
Attach the quick-dry nozzle so this air outlet is vertical.
▶ Set nozzle
For precise styling
▶ Diffuser
For creating full-bodied hair with lots of volume and styling
How to use the hair dryer
Always check that the filter is securely attached before using.
1 Select the temperature of the airflow with the temperature selector (①). 2 Select the intensity of the airflow with the power switch (K).
Notes
• The air remains cool while the cool-shot button is held down. - nanoe™ is produced when the power switch (K) is set to position 1 to 3. - nanoe™ is invisible to the naked eye. - If you are worried about hair damage, set the switch to "1: Set (Gentle airflow)" before use.
- Drops of water may blow out of the nanoe™ outlet (C) during use, but this is not a malfunction.
- A humming noise may come out of the nanoe™ outlet (C), but this is the sound of nanoe™ being discharged and is not a malfunction.
- The effects of nanoe™ might not be felt by the following people. People with crimpy hair, strong curly hair, very smooth hair, short hair, or who have had a hair straightening perm in the last three or four months.
About nanoe™
What is nanoe™?
(nanoe™, mineral ion generation method: high voltage discharge)
nanoe™ is generated by collecting the available moisture in the air, so depending on the usage environment, nanoe™ may not be generated. In environments of low temperature and low humidity, moisture in the air becomes difficult to collect. When this occurs, negative ions are generated.
nanoe™ is ion wrapped in water that are invisible to the human eye.
How nanoe™ works
Generally hair has properties which make it easy to become positively charged with electricity. These properties attract strongly negatively charged nanoe™ which penetrates the hair with moisture. Furthermore, they make the hair slightly acidic, tighten cuticles and keep your hair strong, elastic and healthy.
nanoe™ charge panel
When nanoe™ continues to strike hair, hair becomes negatively charged. As a result, the nanoe™ and negatively charged hair repel each other, making it difficult for nanoe™ to reach hair.
With the nanoe™ Charge System, by just gripping the panel together with the handle, the negative charge accumulated on hair is released.
Because of this, nanoe™ continues to penetrate into hair, supplying moisture and thoroughly moistening down to the tips of hair.
Maintenance of the hair dryer
Always turn the power switch off and disconnect the plug from the household outlet. (Except when performing maintenance on the air outlet)
Maintaining the main body
Do this when dirty
To clean the hair dryer (when it is dirty), soak a cloth in the soapy water and squeeze it out firmly, then wipe with the cloth.
Notes
- Do not use substances such as alcohol, nail polish remover or detergent (hand soap).
Doing so may result in malfunction or part cracks or discoloration.
- Do not leave the appliance with hairdressing products or cosmetics on it.
Doing so will cause deterioration of the plastic, leading to discoloration and cracks.
Maintaining the nanoe™ outlet
- Use commercially available cotton swabs. (We recommend the thin cotton swabs made for use with babies.) - This maintenance allows the hair dryer to sustain the generated level of nanoe™ over a long period.
- Dampen the end of the cotton swab with tap water.
- A needle portion is located deep within the nanoe™ outlet. Using the swab, rub this portion gently about 5 times.
Maintaining the air inlet
Clean the air inlet once a month or more.
- When dust etc. has built up, detach the filter from the hair dryer and remove the dust etc. using a toothbrush or vacuum cleaner.
- Use a commercially available toothbrush.
- Pull on the catch on the bottom side of the filter to detach.
- Remove any dust etc. adhered to the filter or air inlet grille.
Remove the dust etc. adhered to the outside of the filter using a vacuum cleaner. If this does not remove the dust, use the thick part of your fingers to push the dust etc. through the fine mesh on the internal side towards the metal mesh on the external side, and scrub away carefully with a toothbrush. - Using the toothbrush, carefully scrub away any dust etc. from the internal side of the filter. - Using a vacuum cleaner or toothbrush, carefully remove any dust etc. adhered to the air inlet. Rubbing forcefully with your nails may tear the filter, so please use a toothbrush.
- Attach the filter securely, starting with the upper side.
- Keep pressing until you hear a "click" from both upper and lower catches.
Maintaining the air outlet
- The hair dryer should be plugged into the household outlet only in case of maintenance for the air outlet.
- Use a commercially available toothbrush.
- Switch the temperature selector to "Cool" and blow away the dust etc. as you scrub with the toothbrush.
- During maintenance, do not block the air inlet with your hands etc.
- Be careful when using the hair dryer for the first time after maintenance, since it may blow out dust etc.
Scrub to remove any dust, hair etc. blocking the mesh.
Troubleshooting
Problem Possible cause Action
| It switches frequently to cold air while using in “Hot” mode, or sparks can be seen within the body.(These sparks are caused by the thermostat switch, the protective device, and this is not dangerous.) | Lint has accumulated on the air inlet or air outlet.Hair or something is blocking the air inlet. | Remove accumulated lint.Do not block the air inlet. |
| The hot air is abnormally hot. | ||
| The power plug is abnormally hot. | The connection to the household outlet is loose. | Use a household outlet that fi ts securely. |
| Sparks are generated inside the nanoeTM outlet. | Abnormality caused by a dirty electrode (needle portion). | Perform maintenance of the nanoeTM outlet. |
| The nanoeTM outlet emits a noise (crackling noise). |
If the problems still cannot be solved, contact the store where you purchased the unit or a service centre authorised by Panasonic for repair.
Specifications
| Product name Hair Dryer | |||
| Product model EH-NA65/EH-NA63 | |||
| Power source | 220 V~50-60 Hz | 230 V~50-60 Hz | 240 V~50-60 Hz |
| Power consumption | 1 700 W 1 | 850 W 2 000 W | |
| Accessories | Set nozzle, quick-dry nozzle EH-NA65 only, diffuser | ||
| Airborne Acoustical Noise | without nozzle: 75 (dB(A) re 1pW) | ||
This product is intended for household use only.
Disposal of Old Equipment
Only for European Union and countries with recycling systems
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products must not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment.
For more information about collection and recycling, please contact your local authority.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
16
Panasonic®
Operating Instructions
▶ Styling nozzle
A Air outlet
B Styling nozzle
© nanoe™ outlet
D nanoe™ lamp
E Cold air button
F Handle
© Hanging ring
H Cord
▶ Styling nozzle
▶ Blow-dryer nozzle
A Air outlet
B Styling nozzle
C nanoe™ outlet
D Luz nanoe™
▶ Air nozzle
What are nanoe™?
A Air outlet
B Nozzle
© nanoe™ outlet
D nanoe™ lamp
E Cool air button
F Handle
▶ Nozzle
NORWEGIAN
124
A Air outlet B Shaping nozzle © nanoe™ outlet D nanoe™ lamp E Cool-shot button F Handle © Hanging ring H Cord Power plug J Temperature selector ( | )
: Hot (Hot air) ● : Warm (Warm air) : Healthy (Mild air) • : Cold (Cold air)
K Power switch ( )
▶ Shaping nozzle
▶ Shaping nozzle
▶ Adjustable nozzle
▶ Attachment nozzle
For precise styling
▶ Diffuser
► Styling nozzle
A Air outlet
B Shaping nozzle
© nanoe™ outlet
D nanoe™ light
▶ Shaping nozzle
Turkish
236
Navanakorn Industrial Estate, Zone 3 No.106 Moo.18
Khlong 1, Khlong Luang, Pathum Thani 12120, Thailand.
Importer:
Tesan İletişim A.Ş.
© Panasonic Corporation 2020
EN, GE, FR, IT, DU, SP, DA, PT, NW, SW, FI, PL, CZ, SK, HU, RO, TK
Printed in Thailand
EH9210NA638251 E0820-0
- PANASONIC®
- CONTENTS
- WARNING
- SAFETY PRECAUTIONS
- EXPLANATION OF SYMBOLS
- CAUTION
- NOTES
- PARTS IDENTIFICATION
- HOW TO USE THE HAIR DRYER
- ABOUT NANOE™
- WHAT IS NANOE™
- HOW NANOE™ WORKS
- NANOE™ CHARGE PANEL
- MAINTENANCE OF THE HAIR DRYER
- MAINTAINING THE MAIN BODY
- DO THIS WHEN DIRTY
- MAINTAINING THE NANOE™ OUTLET
- MAINTAINING THE AIR INLET
- MAINTAINING THE AIR OUTLET
- TROUBLESHOOTING
- DISPOSAL OF OLD EQUIPMENT
- WHAT ARE NANOE™
Brand : PANASONIC
Model : EH-NA63
Category : Hair dryer