IVR 35/24-2 Sc Me M ACD - Vacuum Cleaner Kärcher - Free user manual and instructions

USER MANUAL IVR 35/24-2 Sc Me M ACD Kärcher

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it. The provided OCR content is "\_\_\_\_", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated text (underscores) where none should exist, violating the rule to ignore such lines. Hence, the OCR result is inconsistent with the Ground Truth.

IVR 35/24-2 Sc Me M ACD

Deutsch 5

English 17

Français 28

Italiano 40

Español 53

Português 65

Nederlands 77

Türkçe 89

Svenska 100

Suomi 110

Norsk 121

Dansk 132

Eesti 143

Latviešu 153

Lietuviškai 164

Polski 175

Magyar 188

Čeština 199

Slovenčina 211

Slovenščina 222

Română 233

Hrvatski 245

Srpski 256

Ελληνικά 268

Русский 281

Українська 295

Қазақша 308

Български 321

中文 334

العربية 344

Abstract geometric symbol with a star-like shape inside a circle (no text or symbols)

EAC

Read Online

99908180 (01/25)

Register your product

www.kaercher.com/welcome

A

Technical diagram of a vacuum cleaner with numbered parts and exploded view, showing internal components and wiring connections.

Mechanical assembly diagram showing a linkage mechanism with a directional arrow (no text or symbols)

Technical line drawing of a mechanical device with directional arrows indicating motion or force (no text or symbols)

Technical line drawing of a mechanical cart with a cylindrical component and directional arrows indicating motion (no text or symbols)

Illustration of hands holding a plastic bag with arrows indicating motion (no text or symbols)

Technical line drawing of a mechanical component with no visible text or symbols

Diagram of a device with two buttons and directional arrows, mounted on a dome (no text or symbols)

H RICHCHER

Technical line drawing of a vacuum cleaner with attached hoses and wheels (no text or symbols)

Technical line drawing of a mechanical assembly with no visible text or symbols

K ① ② ③ ④

Technical line drawing of a mechanical device with a central top component and directional arrow (no text or symbols)

Architectural line drawing of a modern building interior with a circular inset showing a furniture component (no text or symbols)

Inhalt

73550 Waldstetten (Germany)

Tel.: [phone]

Fax: [phone]

T. Wahl

Managing Director

A. Haag

Director R&D

Waldstetten, 24/11/01

73550 Waldstetten (Germany)

Tel.: [phone]

Fax: [phone]

Contents

General instructions .... 17

Safety information 17

Intended use 18

Environmental protection .... 19

Accessories and spare parts...... 19

Scope of delivery 19

Device description.... 19

Symbols on the device.... 20

Initial startup.... 20

Operation 21

Transport.... 23

Storage 24

Care and maintenance.... 24

Troubleshooting guide 26

Disposal 26

Warranty 26

Technical data.... 26

EU Declaration of Conformity ..... 27

General instructions

Read these original instructions before using your device for the first time, adhere to the instructions contained therein and store them for later reference or subsequent owners.

• Be sure to read the safety instructions no. 5.956-249.0 prior to the initial start-up.
• If the operating instructions and safety instructions are not observed, the device can be damaged and dangers could arise for users and other persons.
• Notify the dealer immediately in the case of shipping damage.

Safety information

Hazard levels

⚠️DANGER

- Indication of an imminent threat of danger that will lead to severe injuries or even death.

⚠ WARNING

- Indication of a potentially dangerous situation that may lead to severe injuries or even death.

△CAUTION

- Indication of a potentially dangerous situation that may lead to minor injuries.

ATTENTION

- Indication of a potentially dangerous situation that may lead to damage to property.

General safety instructions

⚠️ DANGER ● Only trained personnel are permitted to use the device and the substances for which it is to be used, including the safe procedure for disposing of the vacuumed material. ● An air exchange rate L must be present in the room when the exhaust gas is returned into the room. To remain within the required limit values, the volume flow of returned air must be no greater than 50% of the fresh air volume (room volume V_R × air exchange rate L_W ). Without special ventilation measures, the following applies: L_W=1h^-1 . ● This device contains dust that is harmful to your health. Emptying and maintenance, including removal of the dust bag, may only be performed by technical specialists wearing suitable personal protective equipment.

- Do not operate the device without the complete filtration system. Observe the applicable safety instructions for the materials being vacuumed. The simultaneous collection of different combustible dusts in the collection container can lead to fires or explosion.

⚠ WARNING • You must not set up or operate the device in areas where there is a risk of dust or gas explosion. A dust explosive atmosphere inside the device is only

allowed in front of the filter. Gas explosive atmospheres are prohibited inside the device. ● The device is not suitable for the suctioning or vacuuming of flammable liquids (flammable, easily flammable, highly flammable according to Dangerous Substances Directive 67/548/EEC) (flash point below 55 °C) and mixtures of flammable dusts and liquids. ● The device is not suitable for the vacuuming of dusts with extremely low minimum ignition energy (ME <1 mJ), e.g. toner, mesh, aluminium powder, lead acid suitable. ● The device is not suitable for sucking up ignition sources and dusts with a glow temperature ≤ 190 °C. ● Every time before use, check whether the equipotential bonding conductors (earthing conductors) are connected. ● The device must not be used or stored outdoors in wet conditions. ● Apply the parking brake at the steering roller to ensure a secure footing for the device. The device may move uncontrollably if the parking brake is open.

⚠️ CAUTION ● In case of longer breaks in operation and after use, switch off the device at the power switches and unplug the mains plug.

ATTENTION • Only use the device indoors. • Risk of crushing! Wear gloves when removing or installing the suction head, filter inlay or collection container.

- Risk of damage! Never vacuum without a filter or with a damaged filter. • Wear safety shoes when operating the device. • Only move the device at walking speed, and to move down a decline, have two workers steady the device as necessary. • Be careful to ensure that there is no dust spillage when replacing accessories. • Surface temperatures can rise to 135°C during normal operation. • Avoid kinking the suction hose unit. • Carry out a regular visual inspection of the hoses.

Electrical connection

The device may only be connected to an electrical connection which has been set up by a qualified electrician as per IEC 60364. For connected loads see Technical data and type plate.

⚠️DANGER

Danger of electric shock

Danger of death

Avoid damaging the power cables by driving over them or otherwise crushing them, or by jerking them.

Protect the cables from heat, oil and sharp edges.

Check the mains connection of the device for damage every time before operation.

Do not operate the device using a damaged cable. Have any damaged cables replaced by a qualified electrician.

Behaviour in the event of an emergency

⚠️DANGER

Risk of injury and damage in the event of a short-circuit or other electrical faults

Danger of electric shock, danger of burns Switch off the device and unplug the mains plug.

Behaviour in case of filter breakage / leakage:

1. Switch off the unit immediately.
   The unit may not be operated without the fresh water filter.
2. Replace the filter.

Intended use

The device is intended for:

• Wet and dry cleaning of floor and wall surfaces
• Vacuuming of dry, flammable, deposited dusts hazardous to health; dust class M according to EN 60335-2-69
• Vacuuming of non-explosive substances
• Vacuuming of flammable dusts of all dust explosion classes (excluding dusts with a minimum ignition energy ME < 1 mJ)
  • Vacuuming of dusts and coarse dirt

• Vacuuming of flammable dusts from a zone 22 if the device is installed outside of potentially explosive areas
  • Vacuuming moist and liquid substances

• Commercial use, e.g. in hotels, schools, hospitals, factories, shops, offices, and rental companies

• Industrial usee.g. in storage and production areas

A corresponding Ex device must be used if there is a classified Ex zone at the device installation location.

The device's correct function is only guaranteed when using suction hose nominal widths of DN40 and DN50.

Any other use constitutes improper use. The device is not suitable for:

• Vacuuming of ignition sources and dusts with a glow temperature ≤ 190 °C
• Vacuuming aluminium and magnesium dusts
• vacuuming of flammable liquids (flammable, easily flammable, highly flammable according to Dangerous Substances Directive 67/548/EEC) (flash point below 55 °C) and mixtures of flammable dusts and liquids
• vacuuming of magnesium dust or powder
• vacuuming of mixtures of flammable liquids and flammable dust
• Vacuuming of smouldering or hot particles where this could otherwise result in a fire or an explosion

Environmental protection

The packing materials can be recy- cled. Please dispose of packaging in accordance with the environmental regulations.

Electrical and electronic devices contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which - if handled or disposed of incorrectly - can pose a potential danger to human health and the environment. However, these components are required for the correct operation of the device. Devices marked by this symbol are not allowed to be disposed of together with the household rubbish.

Notes on the content materials (REACH)

Current information on content materials can be found at: www.kaercher.de/REACH

Accessories and spare parts

⚠️DANGER

Risk of explosion when used with non-permitted accessories

Only use accessories permitted by the manufacturer and with the Ex label for type 22 usage.

Only use original accessories and original spare parts. They ensure that the appliance will run safely and fault-free.

Information on accessories and spare parts can be found at www.kaercher.com.

Note

No accessories are included in the scope of delivery. The accessories must be ordered separately depending on the application.

Scope of delivery

Check the contents for completeness when unpacking. In the event of shipping damage, please notify your dealer.

Device description

For the figures, please refer to the graphics pages

Illustration A

① Equipotential bonding cable
② Steering rollers with parking brake
③Dirt receptacle
④Dust bag
⑤ Equipotential bonding cable
⑥filter
⑦ Pressure gauge
⑧Power switch
⑨Suction head lock
⑩Mains cable
⑪Filter cleaning handle
⑫Accessory holder
⑬Push handle
⑭Suction hose connection
⑮ Lever for lowering the dirt receptacle

Symbols on the device

M ! i M

The device is suitable for vacuuming dusts up to dust class M.

⚠ WARNING

Damage to the skin, lungs and eyes

Expulsion of fine dust during emptying and maintenance work and disposal Wear the prescribed personal protective gear when performing during emptying and maintenance work, including disposal of the dust bag.

ACD EX Ex

The device is suitable for vacuuming flammable dusts, installation outside zone 22.

WARNING: This device must not be placed in any zone 22. If a zone 22 is present, an EX-device must be used.

DN 40 MAX XX,X kPa/ XX,X mbar DN 50 MAX XX,X kPa/ XX,X mbar DN 70 MAX XX,X kPa/ XX,X mbar

The maximum vacuum value in relation to the hose cross-section is specified on the label. The actual value can be read on the pressure gauge. For the values applicable to this device, see chapter Reading the minimum volumetric flow. If this value is not reached, the filter must be cleaned (see chapter Cleaning the filter) or replaced (see chapter Replacing the filter). The various different hose cross-sections allow adaptation to the various different connection cross-sections of the accessories.

Dust bag

(Order no. 9.990-890.0)

filter

(Order no. 9.980-227.0)

Initial startup

⚠ WARNING

Potential equalisation line not connected correctly

Electric shock

Every time before use, check whether the equipotential bonding conductor (earthing conductors) are connected.

⚠ WARNING

Danger from dust that is harmful to your health

Respiratory sicknesses through inhalation of dust.

Do not vacuum without correctly installed filter elements, otherwise a danger to health from increased fine dust emission is present.

ATTENTION

Missing filter element

Damage to the suction motor

Do not vacuum without a filter element.

1. Bring the device into the working position.
2. Secure the device with the parking brakes.
3. Ensure that the suction head is fitted correctly.
4. Insert the suction hose (not included in the scope of delivery) into the suction connection.
5. Check the filling level in the dirt receptacle (see chapter Check the dirt receptacle filling level).
6. Empty the dirt receptacle if necessary (see chapter Emptying the dirt receptacle).
7. Fit the dust bag before dry vacuuming (see chapter Fitting the dust bag).

Illustration B

1. Fit the desired accessory (not included in the scope of delivery) onto the suction hose.

Check the dirt receptacle filling level

Note

The dirt receptacle must be emptied when it is has filled up to approx. 3 cm below the upper edge.

The device does not switch off automatically when the maximum filling level is exceeded.

1. Check the dirt receptacle filling level regularly.

Operation

The device is suitable for vacuuming fine dust up to dust class M.

⚠ WARNING

Danger from dust that is harmful to your health

Respiratory sicknesses through inhalation of dust.

Do not vacuum without correctly installed filter elements, otherwise a danger to health from increased fine dust emission is present.

ATTENTION

Risk of damage to the suction motor.

Never remove the filter element when vacuuming.

Dry vacuuming

Note

All types of dust up to dust class M can be vacuumed with this device. The use of a dust collection bag is required by law.

Note

The device is an industrial vacuum cleaner for vacuuming dry, flammable dusts.

Switching from wet to dry vacuuming

ATTENTION

Switching from wet to dry vacuuming

Risk of damage to the filter

Do not vacuum dry dust with a wet filter element because this clogs the filter and can make it unusable.

1. Allow the wet filter to dry completely or replace it with a dry filter before using the device for dry vacuuming.

2. Replace the filter if necessary.

Fitting the dust bag

1. Secure the device with the parking brakes.

Illustration C

1. Lower the dirt receptacle by pulling up the lever.

Illustration D

1. Pull the dirt receptacle out of the device.

Illustration E

1. Fit the dust bag in the dirt receptacle and carefully position it against the container wall and the container floor.

2. Fold the edge of the dust bag over the edge of the dirt receptacle to the outside.

Illustration D

1. Fit the dirt receptacle in the device.

Illustration C

⚠ WARNING

Improper handling when locking the dirt receptacle

Risk of crushing

Under no circumstances should you hold your hands between the dirt receptacle and filter ring or allow them to come close to the lifting mechanism while locking it.

Lock the dirt receptacle by operating the le-vers with both hands.

ATTENTION

Static charge of the dirt receptacle

Ignition of dusts

Make sure that the grounding on the chassis is in contact with the dirt receptacle.

1. Lock the dirt receptacle with the levers.

Wet vacuum cleaning

⚠️DANGER

Danger from dust that is harmful to your health

Respiratory sicknesses through inhalation of dust.

No dusts harmful to health may be vacuumed when performing wet vacuum cleaning.

ATTENTION

Risk of damage if the dirt receptacle overflows

The dirt receptacle can fill within a few seconds and overflow when vacuuming large amounts of liquids.

Continuously monitor the filling level.

1. Remove the dust bag before wet vacuum cleaning (see chapter Removing the dust bag).

Removing the dust bag

⚠️DANGER

Danger from dust that is harmful to your health

Respiratory sicknesses through inhalation of dust.

Accumulated dust must be transported in dust-proof containers. Do not transfer the contents. The dust bag may only be disposed of by qualified staff.

1. Secure the device with the parking brakes.
2. Remove the suction hose if necessary.
3. Close the suction connection on the filter ring (see chapter Closing the suction connection).

Illustration C

1. Lower the dirt receptacle by pulling up the lever.

Illustration D

1. Pull the dirt receptacle out of the device.

Illustration F

1. Turn up the dust bag.
2. Seal the dust bag tightly with the cable tie.
3. Remove the dust bag.
4. Dispose of the dust bag in accordance with statutory regulations.

Illustration F

1. Fit the dirt receptacle in the device.

Illustration C

⚠ WARNING

Improper handling when locking the dirt receptacle

Risk of crushing

Under no circumstances should you hold your hands between the dirt receptacle and filter ring or allow them to come close to the lifting mechanism while locking it.

Lock the dirt receptacle by operating the bow handle with both hands.

ATTENTION

Static charge of the dirt receptacle

Ignition of dusts

Make sure that the grounding on the chassis is in contact with the dirt receptacle.

1. Lock the dirt receptacle with the levers.

Ending wet vacuum cleaning

⚠ WARNING

Improper disposal of waste water

Environmental pollution

Observe the local waste water treatment regulations.

1. Dry the filter.
2. Clean the dirt receptacle with a moist cloth and dry it off.

Switching on the device

1. Plug the mains plug into the socket.
2. Switch on the device via the suction turbine power switches.

Illustration G

Note

Always switch the suction turbines on and off one after the other. For the correct function of the pressure gauge for monitoring the minimum volume flow, all suction turbines must be switched on.

1. Start the vacuuming process.

Reading the minimum volumetric flow

A pressure gauge showing the vacuum inside the device is mounted on the front of the device. The filter must be cleaned when the maximum vacuum (see table) is reached (see chapter Cleaning the filter). This value depends on the device performance and the suction hose used. If the vacuum is not significantly reduced by dedusting, the filter must be replaced (see chapter Replacing the filter).

ATTENTION

Exceeding the maximum vacuum

Suction loss

If the specified value is exceeded, the air speed in the suction hose drops below 20 m/s. Clean or replace the filter.

Hose diameter Value

DN40 180 mbar (18 kPA)

DN50 160 mbar (16 kPA)

- Clean the filter before or when the specified value is reached.

Cleaning the filter

Note

Clean the filter regularly to avoid declining suction power.

Illustration H

1. Move the filter cleaning handle back and forth several times to clean the filter.

Switching off the device

1. Switch off the device via the suction turbine power switches.
2. Pull out the mains plug.

Each time after use

Closing the suction connection

⚠ WARNING

Risk of injury

Damage to the skin, lungs and eyes through fine dust

The suction connection must be closed using the sealing plug after removing the suction hose.

Illustration I

1. Insert the sealing plug precisely into the suction connection.
2. Push the sealing plug in all the way to the end stop.

Emptying the dirt receptacle

The dirt receptacle must be emptied as required and after each use and cleaned inside and out by vacuuming and wiping with a damp cloth.

A vacuum cleaner with the same or better classification must be used for vacuuming the device.

The inlet opening or the suction hose are closed.

1. Switch off the device and disconnect from the mains supply.
2. Clean the filter.
3. Remove the dirt receptacle from the device and replace the dust bag (see chapter Replacing the dust bag).

Note

Only move the dirt receptacle on its rollers. Do not use a crane, forklift or similar means.

Removing the suction head

1. Switch off the device and disconnect it from the mains supply.
2. Open the suction head lock. Illustration J
3. Remove the suction head and put it to one side.

Cleaning the device

⚠ WARNING

Improper disposal of waste water

Environmental pollution

Observe the local waste water treatment regulations.

1. Vacuum the inside and outside of the device and clean with a moist cloth.
   A vacuum cleaner with the same or better classification must be used for vacuuming the device.
2. If necessary, rinse the accessories (not included in the scope of delivery) with water and dry them.

Storing the device

1. Wind the mains cable onto the cable holders.
2. Store the device in a dry room and secure it against unauthorised use.

Transport

△CAUTION

Failure to observe the weight

Risk of injury and damage

Be aware of the weight of the device during transportation.

The dirt receptacle is emptied.

1. Close the suction connection for dust-free transport (see chapter Closing the suction connection).

2. Release the parking brakes and push the device by the push handle.

3. Grasp the device by the chassis and the push handle for loading.

4. Secure the device against slipping and tipping over when transporting in vehicles.

Storage

△CAUTION

Failure to observe the weight

Risk of injury and damage

Only store the device on level surfaces to prevent it from tipping over.

Be aware of the weight of the device during storage.

The dirt receptacle is emptied.

1. Store the device indoors only.

Care and maintenance

⚠️DANGER

Inadvertently starting up device, touching live components

Risk of injury, electric shock

Switch off the device before performing any work on the device.

Remove the mains plug.

⚠️DANGER

Danger from dust that is harmful to your health

Respiratory sicknesses through inhalation of dust.

Wear a breathing protection mask of class P2 or higher and disposable clothing when performing maintenance work (e.g. filter change).

⚠ WARNING

Danger from dust that is harmful to your health

Respiratory sicknesses through inhalation of dust.

Safety devices providing hazard protection must be checked for correct safety-related functionality at least annually by the manufacturer or an appropriately instruction person, e.g. absence of leaks, filter damage, functionality of the monitoring devices.

ATTENTION

Care agents containing silicone

These can attach plastic components.

Do not use care agents containing silicone for cleaning.

Dust extraction machines are safety devices for the prevention or elimination of hazards according to the DGUV regulation:

- For servicing performed by the user, the device must be disassembled, cleaned

and maintained only to the degree that this is possible without presenting a danger to the maintenance personnel and other persons. Suitable precautionary measures include detoxification before disassembly. Make provisions for local forced ventilation at the location where the device is to be disassembled, for cleaning the maintenance surface and to ensure adequate protection for the personnel.

• The exterior of the device should be detoxified by vacuuming and wiped clean, or treated with sealant before being removed from the hazardous area. All device parts must be regarded as contaminated when they are taken from the hazardous area. Suitable measures must be taken to prevent distribution of the dust.
• All contaminated objects resulting from maintenance and repair work that cannot be satisfactorily cleaned must be correctly disposed of. Such objects must be disposed of in sealed bags in accordance with the applicable regulations for the disposal of this type of waste.

• The suction hose ports are to be closed using the sealing plugs during transport and maintenance of the device.

• Note that you can carry out simple maintenance and care work yourself.

• Clean the surface of the device and the interior of the container regularly with a moist cloth.
• Carry out a regular visual inspection for clogging of the hoses.

Inspection and maintenance work

Have the device regularly inspected according to the respective national accident prevention regulations. Maintenance work as specified by the manufacturer must be performed by a technically qualified person at the specified regular intervals and in accordance with the applicable regulations and safety requirements. Work on electrical components may only be performed by a qualified electrician. Please contact a

KÄRCHER branch office if you have any questions.

Replacing the filter

⚠️DANGER

Danger from dust that is harmful to your health

Respiratory sicknesses through inhalation of dust.

Accumulated dust must be transported in dust-proof containers. Do not transfer the contents. The dust bag may only be disposed of by qualified staff.

⚠ WARNING

Danger from dust that is harmful to your health

Respiratory sicknesses through inhalation of dust.

Do not use the filter element after removing it from the device.

Permanently installed filters may only be replaced in suitable areas, e.g. in so-called decontamination stations) by a technical expert.

Illustration K

①Clamping ring
②filter
③Nuts
④Cleaning fixture

1. Remove the suction head, see chapter Removing the suction head.
2. Remove the filter unit from the device using the handles and turn it over. Illustration L
3. Remove the nuts and remove the cleaning fixture.
4. Loosen the clamping ring screw connection.
5. Remove the filter.
6. Dispose of the foam filter.
7. Fit a new filter.
8. Insert the new foam filter.
9. Fit the tensioning ring and screw it in place.
10. Fit the cleaning device and screw it on.
11. Insert the filter inlay.

In doing so, make sure the tab on the filter inlay fits into the shaft.

Illustration M

Replacing the dust bag

⚠️DANGER

Danger from dust that is harmful to your health

Respiratory sicknesses through inhalation of dust.

Accumulated dust must be transported in dust-proof containers. Do not transfer the contents. The dust bag may only be disposed of by qualified staff.

1. Secure the device with the parking brakes.
2. Remove the suction hose if necessary.
3. Close the suction connection on the filter ring (see chapter Closing the suction connection).

Illustration C

1. Lower the dirt receptacle by pulling up the lever.

Illustration D

1. Pull the dirt receptacle out of the device. Illustration F

2. Turn up the dust bag.

3. Seal the dust bag tightly with the cable tie.

4. Remove the dust bag.

5. Dispose of the dust bag in accordance with statutory regulations.

Illustration E

1. Insert the new dust bag in the dirt receptacle and carefully place it against the container wall and the container floor.

2. Fold the edge of the dust bag over the edge of the dirt receptacle to the outside.

Illustration D

1. Fit the dirt receptacle in the device.

Illustration C

⚠ WARNING

Improper handling when locking the dirt receptacle

Risk of crushing

Under no circumstances should you hold your hands between the dirt receptacle and filter ring or allow them to come close to the lifting mechanism while locking it.

Lock the dirt receptacle by operating the le-vers with both hands.

ATTENTION

Static charge of the dirt receptacle

Ignition of dusts

Make sure that the grounding on the chassis is in contact with the dirt receptacle.

1. Lock the dirt receptacle with the levers.

Troubleshooting guide

⚠️DANGER

Unintentional start-up of the device / electric shock

Unintentional start-up of the suction motor can cause injuries. Voltage present on electrical parts can cause an electric shock. Switch off the device and unplug the mains plug before performing any work on the device.

Have all checks and work on electrical parts performed by an qualified technician.

Note

The device must be switched off immediately in the event of a malfunction. The malfunction must be eliminated before

switching the device on again.

If the malfunction cannot be corrected, the device must be checked by the Customer Service department.

Suction turbine does not start up

1. Check the socket and the power supply fuse.
2. Check the mains cable and the mains plug of the device.
3. Switch the device on.

Suction power decreases

1. Remove the blockages from the suction nozzle, the suction pipe or the suction hose.

2. Replace the filled dust bag (see chapter Replacing the dust bag).

3. Check that the suction head and the dirt receptacle are correctly seated.
4. Dedust the filter (see chapter Cleaning the filter).
5. Check the seating of the filter and correct if necessary.
6. Replace the filter (see chapter Replacing the filter).

Escaping dust when vacuuming

1. Check the seating of the filter and correct if necessary.
2. Dedust the filter (see chapter Cleaning the filter).
3. Replace the filter (see chapter Replacing the filter).

Disposal

At the end of its service life, the device is to be disposed of in accordance with statutory regulations.

Warranty

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing flaw is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site.

(See overleaf for the address)

Further warranty information (if available) can be found in the service area of your local Kärcher website under "Downloads".

Technical data

	IVR 35/24-2 Sc Me M ACD
Electrical connection
Mains voltage V 220-240
Phase ~ 1
Power frequency Hz 50-60
Nominal power W 2400
Protection type IPX4
Protection class I*

		IVR 35/24-2 Sc Me M ACD
Dimensions and weights
Typical operating weight kg 47
Length x width x height mm 720 x 580 x 1090
Effective filter area m	^2	1,4
Ambient conditions
Storage temperature °C -10-40
Device performance data
Container capacity l 35
Vacuum kPa	(mbar)	23 (230)
Air quantity l/s 2 x 74
Max. volume flow with suction hose DN50, m^3/h 250L=3 m
Max. volume flow with suction hose DN40, m^3/h 205L=3 m
Max. volume flow with suction hose DN50, m^3/h 230L=5 m
Max. volume flow with suction hose DN40, m^3/h 190L=5 m
Suction hose connection		DN50
Nominal width of the suction hose		DN40/50
Filter order number		9.980-227.0
Determined values in acc. with EN 60335-2-69
Hand-arm vibration value	m/s^2	<2,5
K uncertainty	m/s^2	0,2
Sound pressure level L_pA	dB(A)	67
Uncertainty K_pA	dB(A)	2
Mains cable
Mains cable H07BQ-F	mm^2	3 x 1.5
Part number (EU)		9.990-835.0
Cable length	m	10

Subject to technical modifications.

EU Declaration of Conformity

We hereby declare that the product named below complies with the relevant provisions of the directives and regulations listed. This declaration is invalidated by any changes made to the product that are not approved by us.

Product: Dry vacuum cleaner

Product: Wet/dry vacuum cleaner

Type: 9.990-xxx

Directives and Regulations

2006/42/EC (+2009/127/EC)

2014/30/EU

2011/65/EU

Harmonised standards used

EN 60335-1

EN 60335-2-69

EN 55014-1: 2017 + A11: 2020

EN 55014-2: 2015

EN IEC 61000-3-2: 2019

EN 61000-3-11: 2000

EN 62233: 2008

EN IEC 63000: 2018

Non-harmonised standards used

IEC 60335-1

IEC 60335-2-69

Name and address

Documentation supervisor:

A. Haag

Kärcher Industrial Vacuuming GmbH

73550 Waldstetten (Germany)

Tel.: [phone]

Fax: [phone]

T. Wahl

Managing Director

A. Haag

Director R&D

Waldstetten, 24/11/01

The signatories act on behalf of and with the authority of the Executive Board.

Kärcher Industrial Vacuuming GmbH

73550 Waldstetten (Germany)

Ph.: [phone]

Fax: [phone]

Contenu

ACD EX Ex I

2006/42/CE (+2009/127/CE)

2014/30/UE

2011/65/UE

73550 Waldstetten (Germany)

Tél. : [phone]

T. Wahl
Managing Director

A. Haag
Director R&D

Waldstetten, le 01/11/24

73550 Waldstetten (Germany)

Tél. : [phone]

73550 Waldstetten (Germany)

Tel.: [phone]

Fax: [phone]

T. Wahl

Managing Director

A. Haag

Director R&D

Waldstetten, 01/11/24

73550 Waldstetten (Germany)

Tel.: [phone]

Fax: [phone]

ACD EX Ex

2006/42/CE (+2009/127/CE)

2014/30/UE

2011/65/UE

ACD EX Ex

2006/42/CE (+2009/127/CE)

2014/30/UE

2011/65/UE

ACD EX Ex

73550 Waldstetten (Germany)

Tel.: [phone]

Fax: [phone]

T. Wahl

Managing Director

A. Haag

Director R&D

Waldstetten, 24/11/01

73550 Waldstetten (Germany)

Tel.: [phone]

Fax: [phone]

İçindekiler

Genel uyarılar 89

Güvenlik bilgisi 89

ACD EX Ex

(Sipariş No. 9.980-227.0)

İşletime alma

⚠UYARI

2006/42/AT (+2009/127/AT)

2014/30/AB

2011/65/AB

73550 Waldstetten (Germany)

Tel.: [phone]

Faks: [phone]

T. Wahl

Managing Director

A. Haag

Director R&D

Waldstetten, 24/11/01

73550 Waldstetten (Germany)

Tel.: [phone]

Faks: [phone]

Innehåll

Allmän information 100

Säkerhetsinformation 100

ACD EX Ex

73550 Waldstetten (Germany)

Tel.: [phone]

Fax: [phone]

T. Wahl

Managing Director

A. Haag

Director R&D

73550 Waldstetten (Germany)

Tfn: [phone]

Fax: [phone]

Sisältö

73550 Waldstetten (Germany)

73550 Waldstetten (Germany)

Støvutslipp under suging

73550 Waldstetten (Germany)

Tlf.: [phone]

Faks: [phone]

T. Wahl
Managing Director

A. Haag
Director R&D

Waldstetten, 24/11/01

73550 Waldstetten (Germany)

Tlf.: [phone]

Faks: [phone]

Indhold

ACD EX Ex

2006/42/EF (+2009/127/EF)

2014/30/EU

2011/65/EU

73550 Waldstetten (Germany)

Tlf.: [phone]

Fax: [phone]

T. Wahl

Managing Director

A. Haag

Director R&D

Waldstetten, 24/11/01

73550 Waldstetten (Germany)

Tlf.: [phone]

Fax: [phone]

Sisukord

Üldjuhised 143

Ohutusjuhised 143

Sihtotstarbeline kasutamine.... 144

ACD EX Ex

2006/42/EÜ (+2009/127/EÜ)

2014/30/EL

2011/65/EL

73550 Waldstetten (Germany)

Tel: [phone]

Faks: [phone]

T. Wahl
Managing Director

A. Haag
Director R&D

Waldstetten, 24/11/01

73550 Waldstetten (Germany)

Tel: [phone]

Faks: [phone]

Saturs

T. Wahl
Managing Director

A. Haag
Director R&D

Valdštatene (Waldstätten), 01.11.24.

T. Wahl
Managing Director

A. Haag
Director R&D

ACD EX Ex

2006/42/WE (+2009/127/WE)

2014/30/UE

2011/65/UE

ACD EX Ex

T. Wahl
Managing Director

A. Haag
Director R&D

ACD EX Ex I

2006/42/ES (+2009/127/ES)

2014/30/EU

2011/65/EU

ACD EX Ex

2006/42/ES (+2009/127/ES)

2014/30/EÚ

2011/65/EÚ

73550 Waldstetten (Germany)

Tel.: [phone]

Fax: [phone]

T. Wahl
Managing Director

A. Haag
Director R&D

73550 Waldstetten (Germany)

Tel.: [phone]

Fax: [phone]

Kazalo

Splošni napotki.... 222

Varnostna navodila 223

Namenska uporaba.... 224

Zaščita okolja 224

Pribor in nadomestni deli.... 224

Obseg dobave.... 225

Opis naprave.... 225

Simboli na napravi.... 225

Zagon.... 225

Obratovanje.... 226

Prevažanje 229

ACD EX Ex

2006/42/ES (+2009/127/ES)

2014/30/EU

2011/65/EU

T. Wahl
Managing Director

A. Haag
Director R&D

Waldstetten, 1. 11. 24

ACD EX Ex

ACD EX Ex

Uređaj je prikladan za usisavanje gorive prašine, postavljanje izvan zone 22.

UPOZORENJE: Ovaj se uređaj ne smije postavljati u zoni 22. Ako postoji zona 22, mora se upotrebljavati Ex uređaj.

DN 40 MAX XX,X kPa/ XX,X mbar DN 50 MAX XX,X kPa/ XX,X mbar DN 70 MAX XX,X kPa/ XX,X mbar

2006/42/EZ (+2009/127/EZ)

2014/30/EU

2011/65/EU

Primijenjene uskladene norme

EN 60335-1

EN 60335-2-69

EN 55014-1: 2017 + A11: 2020

EN 55014-2: 2015

EN IEC 61000-3-2: 2019

EN 61000-3-11: 2000

EN 62233: 2008

EN IEC 63000: 2018

Primijenjene neuskladene norme

IEC 60335-1

IEC 60335-2-69

Ime i adresa

Opunomoćenik za dokumentaciju:

A. Haag

Kärcher Industrial Vacuuming GmbH

73550 Waldstetten (Germany)

Tel.: [phone]

Faks: [phone]

T. Wahl
Managing Director

A. Haag
Director R&D

73550 Waldstetten (Germany)

Tel.: [phone]

Telefaks: [phone]

Sadržaj

Opšte napomene.... 256

Sigurnosne napomene.... 257

Namenska upotreba.... 258

2006/42/EZ (+2009/127/EZ)

2014/30/EU

2011/65/EU

Primenjene harmonizovane norme

EN 60335-1

EN 60335-2-69

EN 55014-1: 2017 + A11: 2020

EN 55014-2: 2015

EN IEC 61000-3-2: 2019

EN 61000-3-11: 2000

EN 62233: 2008

EN IEC 63000: 2018

Primenjeni neharmonizovani standardi

IEC 60335-1

IEC 60335-2-69

Naziv i adresa

Lice ovlašćeno za dokumentaciju:

A. Haag

Kärcher Industrial Vacuuming GmbH

Robert-Bosch-Strasse 4-8

73550 Waldstetten (Nemačka)

Tel.: [phone]

Faks: [phone]

T. Wahl

Managing Director

A. Haag

Director R&D

Waldstetten, 24/11/01

Potpisnici deluju u ime i uz punomoć rukovodstva.

Kärcher Industrijsko usisavanje GmbH

ACD EX Ex O B U O I

73550 Waldstetten (Germany)

Tηλ.: [phone]

Φαξ: [phone]

T. Wahl
Managing Director

A. Haag
Director R&D

Waldstetten, 24/11/01

73550 Waldstetten (Germany)

Tηλ.: [phone]

Φαξ: [phone]

Содержание

Общие указания 281

ACD EX Ex

T. Wahl
Managing Director

A. Haag
Director R&D

ACD EX Ex

T. Wahl
Managing Director

A. Haag
Director R&D

Waldstetten, /11/01

ACD EX Ex

. IPOQF JGHAZ WAFSLH EN SHIBKA KHEBAYA.

Icon showing a gear and wrench inside a square frame (no text or symbols)

http://www.kaercher.com/dealersearch

QR code image containing a central logo, likely linking to a digital resource or website.