Redmi Pad 2 Pro - Tablet Xiaomi - Free user manual and instructions

USER MANUAL Redmi Pad 2 Pro Xiaomi

To view the user guide, scan the QR code.

QR code image containing encoded data, no visible human-readable text

Redmi Pad 2 Pro

Quick Start Guide

Line drawing of a tablet device showing front, side, and top views with buttons and battery (no text or symbols)

EN

Thank you for choosing Redmi Pad 2 Pro

Long press the power button to turn on the device.

Follow the on-screen instructions to configure the device.

For more information, visit our official website:

www.mi.com/global/service/userguide

WEEE

Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

To prevent possible hearing damage, do not listen at high volume levels for long periods. Additional safety information and precautions can be accessed at the following link: www.mi.com/global/certification

Important Safety Information

Read all safety information below before using your device:

• Use of unsuitable cables, power adapters, or batteries can cause fire explosion, electric shock, pose other risks, or damage the device.
• This device's operating temperature range is 0^ to 40^ . Using this device in an environment outside of this temperature range may damage the device.
• Charge this device only with the included or suitable cable and power adapter. Use only authorized accessories which are compatible with your device.
  • After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours.
• The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations.

• Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.

• Do not short circuit the battery, as this may cause overheating, burns, or other injury.

• Do not place the battery in a high-temperature environment.
• Overheating may cause explosion.
• Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.
• Do not burn the battery, as this may cause fire or explosion.

- Keep your device dry.

• Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
• For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.
• Ecodesign information: Can find the information as below link: https://www.mi.com/global/support/ecodesign-energy.

Safety Precautions

• Observe all applicable laws and rules restricting use of tablet in specific situations and environments.
• Do not use your tablet at petrol stations or in any explosive atmosphere or potentially explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your tablet or other radio equipment. Turn off your tablet or wireless device when in a blasting area or in areas requiring "two-way radios" or "electronic devices" to be turned off to prevent potential hazards.
• Do not use your tablet in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules and regulations of hospitals and health centers. If you have a medical device, please consult your doctor and the device manufacturer to determine whether your tablet may interfere with the device's operation. To avoid potential interference with a pacemaker, always maintain a minimum distance of 15 cm between your tablet and the pacemaker. To avoid interference with medical equipment, do not use your tablet near hearing aids, cochlear implants, or other similar devices.
• Observe all aircraft safety regulations and turn off your tablet on board aircraft when required.
• When driving a vehicle, use your tablet in accordance with relevant traffic laws and regulations.
• To avoid being struck by lightning, do not use your tablet outdoors during thunderstorms.
• Do not use your tablet in places with high humidity, such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage.
• For environmental reasons this package does not include a charger. This device can be powered with most USB power adapters and a cable with USB Type-C plug.
• Charging: Do any of the following to charge

- Connect the "Redmi Pad 2 Pro" to computer using a USB data cable.

• Use the USB cable included in the gift box with a Mi brand charger and then connect it to a power strip.
• Please note that the product allows the use of chargers with the maximum output of 33W.

- Charging Compatibility

- You can also use any third-party charger that complies with USB2.0 or higher protocol standards and also meets the requirements of the International Information Technology Equipment Safety Standard (IEC 60950), Audio/video, Information and Communication Technology Equipment Standard (IEC 62368-1) and the related laws and regulations of your country or region. Using other chargers that do not meet the above requirements to charge this product may damage the product itself and your personal or property safety.

Security Statement

Please update your tablet's operating system using the built-in software update feature, or visit any of our authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks.

The power delivered by the charger must be between min [10] Watts required by the radio equipment, and max [33] Watts in order to achieve the maximum charging speed. USB PD fast charging

EU Regulations

RED Declaration of Conformity

Xiaomi Communications Co., Ltd. hereby declares that this Tablet with Bluetooth and Wi-Fi 25099RP13G is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mi.com/en/certification

RF Exposure Information (SAR)

This device is in compliance with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU). During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands. When attaching the device near the body, a belt clip or holster should be used which does not contain metallic components. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided.

Certification Information (Highest SAR)

SAR 10 g limit: 2.0 W/Kg SAR Value: Body: 0.992 W/Kg (0 mm distance).

Legal Information

This device may be operated in all member states of the EU and UK. Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in the 5250 to 5350 MHz frequency range in : AT,BE,BG,HR,CY,CZ,DK,EE,FI,FR,DE,EL,HU, IE,IT,LV,LT,LU,MT,NL,PL,PT,RO,SK,SI,ES,SE,UK(NI),UK,IS,LI,NO,CH,TR

This device is restricted to indoor use only when operating in the 5150 to 5350MHz in Hong Kong.

Wi-Fi connectivity (including Wi-Fi frequency bands, Wi-Fi standards and other features as ratified in IEEE Standard 802.11 specifications) may vary based on regional availability and local network support. The function may be added via OTA when and where applicable

Restrictions in the 2.4 GHz band: Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Please ensure the used power adapters are compliant with applicable country regulations and international and regional safety standards.

Frequency Bands and Power

This tablet offers the following frequency bands in EU areas only and maximum radio-frequency power: Bluetooth: 20 dBm Wi-Fi 2.4 GHz band: 20 dBm Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm, 5470 to 5725 MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm

Ecodesign information

Can find the Product information as below link: https://www.mi.com/global/support/ecodesign-energy.

FCC Regulations

This tablet complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This tablet has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information (SAR)

This device meets the government's requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified, and use of such body-worn accessory should be avoided.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

E-label

This device has an electronic label for certification information.

To access it, please go to Settings > About tablet > Certification, or open Settings and type

"Certification" into the search bar

Instructions for Factory reset

Path: Settings > About tablet > Factory reset

You can quickly erase the local data on the device via ""Factory reset""". Data to be erased includes:

Accounts, Contacts, Photos and videos, Apps, Backups, SD card data and Other items on this device.

Model: 25099RP13G

2509 indicates that this product will be launched after 202509

Disclaimer

This quick start guide is published by Xiaomi or its local affiliated company. Improvements and changes to this guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the quick start guide (please see details at www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately depict the actual device.

FR

www.mi.com/global/service/userguide

DEEE

019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

www.mi.com/global/service/userguide

RAEE

RACCOLTA DIFFERENZIATA

www.mi.com/global/service/userguide

WEEE

www.mi.com/global/service/userguide

WEEE

www.mi.com/global/service/userguide

REEE

SAR limite 10 g: 2,0 W/kg,

www.mi.com/global/service/userguide

WEEE

www.mi.com/global/service/userguide

AHHE

www.mi.com/global/service/userguide

OEEZ

Limit SAR 10 g: 2,0 W/kg

www.mi.com/global/service/userguide

WEEE

Manufacturer's Authorized EU Representative

Name: Xiaomi Technology Netherlands B.V

Address: Prinses Beatrixlaan 582, 2595BM, The Hague, The Netherlands

[e-mail]

Manufacturer's Authorized UK Representative for Products Exported to the UK:

Xiaomi Technology UK Limited

Address: Us & Co Stratford Floor Br40-11-12-13-14, 11 Burford Road, London, England, E15 2ST

[e-mail]

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer postal address:

019, 9th Floor, Building 6, 33 Xi'erqi Middle Road,

Haidian District, Beijing, China, 100085

[e-mail]

Brand: RedmiModel:25099RP13G

© Xiaomi Inc. All rights reserved.

材料 /Paper use of user guide:

内文页：80g 无光铜 /80g C2S(coated two side) matt art paper

正背哑油 /water-base matt varnish on front/back side

尺寸 /Side

number according to the regulations and check carefully

1, Datamatrix 码尺寸 /Datamatrix size: 6X6mm
2，扫码显示格式为 /The scan code display format:

XXXXXXXXXXXXA