SS-door1-WH-3 - Swing door Vevor - Free user manual and instructions

USER MANUAL SS-door1-WH-3 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

SWINGING DOORS

MODEL:SS-door1-WH-3

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

MODEL:SS-door1-WH-3

White rectangular vent with horizontal slats, no visible text or symbols

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you and there are any technology or software updates on our product.

Safety Instructions

Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions cause personal injury or damage to valuable property.

WARNING:

1. Do not draw, cut, or use sharp objects on the swinging doors to damage.
2. If you need to disassemble the swinging doors, please follow the steps to disassemble it and store it properly.
3. Clean the swinging doors regularly to keep it clean and fresh, you use a vacuum cleaner or damp cloth to gently wipe the swinging do

Maintenance Guide

1. Regularly clean the swinging doors, use a damp cloth to wipe the surface, and remove dust and dirt.
2. Avoid using corrosive cleaning agents or chemical solvents to clear swinging doors.
3. If the swinging doors is found to be damaged, please replace the swinging doors handles piece in time to ensure its normal use.

SAVE THESE INSTRUCTIONS

Part List
A		1
B		2
C	(M4*25)	16
D		1
E	(M5*58)	3
F		3
G		4
H		1

Product Installation

Step1:Mounting hinge.

Technical diagram showing a mechanical assembly transformation from a vertical post to a horizontal bar, with labeled components A, B, and C.

Step2:Mounting door panel.

Note: The door panel should be flush with the door frame strip.

D C

Step3: Install the swinging door on the door frame.

Isometric line drawing of a structural frame with diagonal bracing and vertical supports (no text or symbols)

Step4:Adjusting hinge.

Close-up of a hand holding a metallic hinge component against a dark background (no text or symbols visible)

A. Insert the wrench into the hinge.

Close-up of a metallic mechanical component with a handle and mounting bracket (no visible text or symbols)

B.Swivel wrench adjusts hinge elasticity and inserts latch.

Close-up of a hand adjusting a metallic mechanical component (no visible text or symbols)

C.Select different holes to insert the latch to obtain different closing speeds.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODÈLE : SS-door1-WH-3

MODÈLE : SS-door1-WH-3

White rectangular vent or vent with horizontal slats, no visible text or symbols

BESOIN D'AIDE? CONTACTEZ-NOUS!

Technical diagram showing a mechanical assembly transformation from a vertical post to a horizontal bar, with labeled components A, B, and C.

Technical line drawing of a structural frame with diagonal bracing and mounting brackets (no text or symbols)

Close-up of a hand holding a metallic hinge component against a dark background (no text or symbols visible)

Close-up of a metallic mechanical component being held, no visible text or symbols

B. Clé pivotante

Close-up of a hand adjusting a metallic mechanical component (no visible text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting Limited Bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT DE LA CE

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

PENDELTÜREN

MODELL:SS-door1-WH-3

MODELL:SS-door1-WH-3

White rectangular vent or vent with horizontal slats, no visible text or symbols

Technical diagram showing a mechanical assembly transformation from a vertical post to a horizontal bar, with labeled components A, B, and C.

Technical line drawing of a structural frame with diagonal bracing and mounting brackets (no text or symbols)

Close-up of a hand holding a metallic hinge component against a dark background (no text or symbols visible)

Close-up of a metallic mechanical component being held, no visible text or symbols

B. Schwenkschlüssel

Close-up of a hand adjusting a metallic mechanical component (no visible text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting Limited Büro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

elettronica www.vevor.com/support

PORTE A BATTENTE

MODELLO:SS-door1-WH-3

MODELLO:SS-door1-WH-3

White rectangular vent or vent with horizontal slats, no visible text or symbols

Technical diagram showing a mechanical assembly transformation from a vertical post to a horizontal bar, with labeled components A, B, and C.

Technical line drawing of a structural frame with diagonal bracing and mounting brackets (no text or symbols)

Close-up of a hand holding a metallic hinge component against a dark background (no text or symbols visible)

Close-up of a metallic mechanical component being held, no visible text or symbols

B. Chiave girevole

Close-up of a hand adjusting a metallic mechanical component (no visible text or symbols)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

RAPPRESENTANZA DEL REGNO UNITO

YH CONSULTING LIMITED. C/O YH Consulting Limited Ufficio 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELO: SS-door1-WH-3

MODELO: SS-door1-WH-3

White rectangular vent or vent with horizontal slats, no visible text or symbols

www.vevor.com/support

Technical diagram showing a mechanical assembly transformation from a vertical post to a horizontal bar, with labeled components A, B, and C.

Technical line drawing of a structural frame with diagonal bracing and mounting brackets (no text or symbols)

Paso 4: Ajuste de la bisagra.

Close-up of a hand holding a metallic hinge component against a dark background (no text or symbols visible)

Close-up of a metallic mechanical component being held, no visible text or symbols

B.Llave giratoria

Close-up of a hand adjusting a metallic mechanical component (no visible text or symbols)

Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRESENTANTE CE

E-CrossStu GmbH

Mainzer Landstr.69,

Technical diagram showing a mechanical assembly transformation from a vertical post to a horizontal post, with labeled components A, B, and C.

Technical line drawing of a structural frame with diagonal bracing and mounting brackets (no text or symbols)

Close-up of a hand holding a metallic hinge component against a dark background (no text or symbols visible)

Close-up of a metallic mechanical component being held, no visible text or symbols

Close-up of a hand adjusting a metallic mechanical component (no visible text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Przedstawiciel UE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

VEVOR®

TOUGH TOOLS, HALF PRICE

HULP NODIG? NEEM CONTACT MET ONS OP!

Technical diagram showing a mechanical assembly transformation from a vertical post to a horizontal bar, with labeled components A, B, and C.

Stap 2: Deurpaneel monteren.

Technical line drawing of a structural frame with diagonal bracing and mounting brackets (no text or symbols)

Stap 4: Scharnier afstellen.

Close-up of a hand holding a metallic hinge component against a dark background (no text or symbols visible)

Close-up of a metallic mechanical component being held, no visible text or symbols

B. Draaisleutel

Close-up of a hand adjusting a metallic mechanical component (no visible text or symbols)

C.Selecteer verschillende gaten om de

YH CONSULTING LIMITED. C/O YH Consulting Limited Kantoor 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX

EC-REP

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

SVINGDÖRRAR

MODELL:SS-dörr1-WH-3

Technical diagram showing a mechanical assembly transformation from a vertical post to a horizontal bar, with labeled components A, B, and C.

Technical line drawing of a structural frame with diagonal bracing and mounting brackets (no text or symbols)

Close-up of a hand holding a metallic mechanical hinge or bracket, no visible text or symbols

Close-up of a metallic mechanical component being held, no visible text or symbols

B.Vridnyckel

Close-up of a hand adjusting a metallic mechanical component (no visible text or symbols)

C.Välj olika

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

www.vevor.com/support