PY-2317SS - Wardrobe Vevor - Free user manual and instructions

Product Type	Jewelry Armoire
Brand	Vevor
Model	PY-2317SS
Color	Brown
Main Material	Medium Density Fiberboard (MDF)
Dimensions (H x W x D)	160,02 x 39,19 x 36,60 cm
LED Lamp Power Supply	DC 5 V / 4,5 W
Mounting Type	Freestanding (on feet)
Lock	Combination lock, default code 0-0-0
Number of Compartments	Multiple drawers and compartments (according to assembly diagram)
Care and Cleaning	Soft dry cloth, occasional mild detergent. Avoid acidic chemicals.
Safety Precautions	Assembly by an adult; keep small parts and plastic bags away from children; do not climb
Recommended Use	Indoors, away from moisture and direct sunlight
Moving	Lift the armoire, do not slide it
Support and Warranty	Electronic warranty certificate at www.vevor.com/support
Compliance	FCC Part 15 Class B for LED lamp

Frequently Asked Questions - PY-2317SS Vevor

How to change the armoire lock code?

The default code is 0-0-0. To change it, open the lock with the current code, hold the reset button (or follow specific instructions in the manual), turn the dial to the new code, then release the button. See the manual for exact details.

How to clean the armoire?

Use a soft dry cloth for daily maintenance. If necessary, you can apply a mild detergent. Never use a damp cloth or hard objects that could scratch the surface. Avoid acidic chemicals.

Can I install the armoire in a bathroom?

No, it is not recommended to install the armoire in a dark and damp place. It should be placed in a room at normal temperature, away from direct sunlight and heat sources to avoid deformation.

What to do if the armoire has a new smell?

Place the armoire in a well-ventilated area and open the doors for a few days to let the smell dissipate. This is normal for new products.

How to assemble the armoire?

Check that you have all the parts listed in the manual. Follow the assembly steps on the diagram by positioning and adjusting the parts, then gradually tighten all screws without over-tightening. It is recommended to assemble the armoire with two adults, on a padded surface to protect the parts.

Is the armoire safe for children?

The product is not intended for children. Children should be supervised to prevent them from climbing or playing around. Small parts and the plastic bag pose a choking hazard. Keep these items out of reach.

How does the built-in LED lamp work?

The LED lamp operates on a DC power supply of 5 V and 4,5 W. It likely connects via a USB cable (not included). See the manual for location and connection instructions.

What are the manufacturing materials?

The armoire is made of Medium Density Fiberboard (MDF).
The LED lamp is an electronic component compliant with FCC regulations.

How to move the armoire without damaging it?

Do not slide the armoire. Lift it carefully to move it. Make sure to place it on a flat floor and avoid sharp objects.

Where can I find after-sales service or download the manual?

Visit www.vevor.com/support for technical assistance, electronic warranty certificate, and to download the user manual.

USER MANUAL PY-2317SS Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

JEWELRY CABINET

MODEL:PY-2316SS/PY-2317SS

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only repressor estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered by are kindly reminded to verify carefully when you are placing an order with us if you actually saving half in comparison with the top major brands.

MODEL: PY-2316SS/PY-2317SS

Line drawing of a vertical shelf or cabinet with a lid and side shelves (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

WARNING:

1. This manual lists the contents included in the box. Please take time to identify the hardware as well as the individual components of the product
2. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
3. Small parts present in an unassembled state. It's a choking hazard! During the mounting process, keep small objects out of the reach of children. It may be fatal if swallowed or inhaled.
4. To avoid the danger of suffocation, keep the plastic bag away from babies and children.
5. Please follow the assembly instructions closely. Improper assembly can result in personal or property damage.
6. Assembled by an adult. The product is not intended for children.
   Children must be under adult supervision to use the product. Otherwise the seller is not liable for the damage or the injury.
7. Never allow children to climb or play around the product, in order to prevent the product falling and mirror body being broken, and protect children from personal injury.
8. Do not install it in a dark, damp place.
9. Prohibit child climbing.
10. Clean and disinfect your product frequently to keep it clean and hygienic.
11. There may have the smell when unwrap the packaging, please place the cabinet in a ventilated area and open the door to remove the smell.

FCC Information for LED lamp

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment!

This device complies with Part 15 of the FCC Rules. Operation is subject the following two conditions:

1) This product may cause harmful interference.
2) This product must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this product not expressly approved by the party.responsible for compliance could void the user's authority to operate the product.

Note: This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules, These lines are designed to provide reasonable protection against harmful interference in a residential installation.

This product generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television

reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the distance between the product and receiver.
• Connect the product to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

CORRECT DISPOSAL for LED lamp

This product is subject to the provision of european Directive 2012/19/EU. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the

European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycle electrical and electronic devices.

MODEL AND PARAMETERS

Model	PY-2316SS	PY-2317SS
Product Size	H*W*D=63*15.43*14.41in
Color	White	Brown
LED light	DC 5V/4.5W
Mounting Type	Standing type
Material	Medium density fiberboard+Glass+Velvet

PARTS LIST AND INSTALLATION

NOTE:

1. Please check you have all the parts as shown in the part list.
2. Follow the assembly steps shown in the diagram to position and adjust the parts, then gradually tighten all screws (note: do not tighten excessively).
3. It is recommended to mount the cabinet by two adults. Pay attention to mount the cabinet horizontally and ensure the firmness to avoid overturning or falling.

A X1	B X2
C X1	D X1
E X1	F X1
G X1	H X1
I X3	<16
K X4 L X6 M X1

STEP 1

STEP 2

NOTE: The side of the board F with "Back" mark, and the side of the turntable base B with the raised stop are all in the back.

STEP 3

STEP 4

graph TD
    A[" "] --> B[" "]
    B --> C[" "]

STEP 5

Line drawing of a multi-tiered mechanical device with labeled components, showing internal structure and external housing (no text or symbols)

STEP 6

Line drawing of a tall rectangular cabinet or enclosure with a side shelf, no text or symbols present

INSTRUCTIONS FOR LOCK

The lock is opened at the original number 0-0-0, aligned with the indicati line.

Password change method:

Sharp object against this hole.

1. Enter the old password and align it with the so
2. Hold the pointed object against the hole, and t dial the desired password.
3. Let go and the password is set.

MAINTENANCE

1. Open and close the door lightly, so as not to damage the hinges (opening angle of the door is about 100 degrees.)
2. Please put the article on the flat ground and away from sharp and hat objects. Prohibit rudely dragging the cabinet, please lift it up to finish the move.
3. For daily care, please clean with a soft and dry cloth. If necessary, you can use the neutral detergent. Not be allowed to wipe the surface with a wet cloth or hard objects.
4. Keep the article away from acidic chemicals so as not to cause chemical reactions or discoloration, etc.
5. Keep this product in room with normal temperature. Avoid direct sunlig or next to heat sources, which can cause the deformation, distortion ever cracking.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represer estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered by are kindly reminded to verify carefully when you are placing an order with us if yo actually saving half in comparison with the top major brands.

MODELL: PY-231 6 SS/PY-231 7 SS

Line drawing of a vertical shelf or cabinet with a lid and side shelves (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

! WARNING:

STEG 2

NOTE: The side of the board F with "Back" mark, and the side of the turntable base B with the raised stop are all in the back.

STEG 3

STEG 4

graph TD
    A[" "] --> B[" "]
    B --> C[" "]

STEG 5

Line drawing of a multi-tiered mechanical device with labeled components, showing internal structure and external housing (no text or symbols)

STEG 6

Line drawing of a tall rectangular cabinet or enclosure with a side shelf, no text or symbols present

INSTRUCTIONS FOR LOCK

Sharp object against this hole.

1. Enter the old password and align it with the so
2. Hold the pointed object against the hole, and t dial the desired password.
3. Let go and the password is set.

MAINTENANCE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only repressor estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered by are kindly reminded to verify carefully when you are placing an order with us if you actually saving half in comparison with the top major brands.

MODELO: PY-231 6 SS/PY-231 7 SS

Line drawing of a vertical shelf or cabinet with a lid and side shelves (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

ADVERTENCIA:

Line drawing of a standard threaded bolt with a flanged end (no text or symbols)

KX4

Line drawing of a screw with threaded shaft and threaded end (no text or symbols)

L×6

Line drawing of a pen or stylus with a curved tip and pointed tip (no text or symbols)

M×1

PASO 1

PASO 2

NOTE: The side of the board F with "Back" mark, and the side of the turntable base B with the raised stop are all in the back.

PASO 3

ETAPA 4

graph TD
    A[" "] --> B[" "]
    B --> C[" "]

PASO 5

Line drawing of a vertical ladder structure with an open box and labeled components (no text or symbols)

PASO 6

Line drawing of a tall rectangular metal enclosure with a side shelf, no text or symbols present

INSTRUCTIONS FOR LOCK

Sharp object against this hole.

1. Enter the old password and align it with the so
2. Hold the pointed object against the hole, and t dial the desired password.
3. Let go and the password is set.

MAINTENANCE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only repressor estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered by are kindly reminded to verify carefully when you are placing an order with us if you actually saving half in comparison with the top major brands.

MODELLO: PY-231 6 SS/PY-231 7 SS

Line drawing of a vertical shelf or cabinet with a lid and side shelves (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

AVVERTIMENTO:

Line drawing of a standard threaded bolt with a flanged end (no text or symbols)

KX4

Line drawing of a screw with threaded shaft and threaded end (no text or symbols)

L×6

Line drawing of a pen or stylus with a curved tip and pointed tip (no text or symbols)

M×1

PASSO 1

PASSO 2

NOTE: The side of the board F with "Back" mark, and the side of the turntable base B with the raised stop are all in the back.

PASSO 3

PASSO 4

graph TD
    A[" "] --> B[" "]
    B --> C[" "]

PASSO 5

Line drawing of a multi-tiered mechanical structure with an open box and labeled components (no text or symbols present)

PASSO 6

Line drawing of a tall rectangular metal cabinet with a side shelf, no text or symbols present

INSTRUCTIONS FOR LOCK

Sharp object against this hole.

1. Enter the old password and align it with the so
2. Hold the pointed object against the hole, and t dial the desired password.
3. Let go and the password is set.

MAINTENANCE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only repressor estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered by are kindly reminded to verify carefully when you are placing an order with us if you actually saving half in comparison with the top major brands.

MODEL: PY-231 6 SS/PY-231 7 SS

Line drawing of a vertical shelf or cabinet with a double door and three side compartments (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

⚠ OSTRZEŻENIE:

Line drawing of a standard threaded bolt with a flanged end (no text or symbols)

KX4

Line drawing of a screw with threaded shaft and threaded end (no text or symbols)

L×6

Line drawing of a pen or stylus with a curved tip and pointed tip (no text or symbols)

M×1

KROK 1

KROK 2

NOTE: The side of the board F with "Back" mark, and the side of the turntable base B with the raised stop are all in the back.

KROK 3

KROK 4

graph TD
    A["Box E"] --> B["Box D"]
    B --> C["Box"]

KROK 5

Line drawing of a multi-tiered mechanical structure with an open box and labeled components (no text or symbols present)

KROK 6

Line drawing of a tall rectangular metal cabinet with a side shelf, no text or symbols present

INSTRUCTIONS FOR LOCK

Sharp object against this hole.

1. Enter the old password and align it with the so
2. Hold the pointed object against the hole, and t dial the desired password.
3. Let go and the password is set.

MAINTENANCE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represer estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered by are kindly reminded to verify carefully when you are placing an order with us if yo actually saving half in comparison with the top major brands.

MODELL: PY-231 6 SS/PY-231 7 SS

Line drawing of a vertical shelf or cabinet with a lid and side shelves (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

! WARNING:

SCHRITT 1

SCHRITT 2

NOTE: The side of the board F with "Back" mark, and the side of the turntable base B with the raised stop are all in the back.

SCHRITT 3

SCHRITT 4

graph TD
    A[" "] --> B[" "]
    B --> C[" "]

SCHRITT 5

Line drawing of a vertical ladder structure with an open box and labeled components (no text or symbols)

SCHRITT 6

Line drawing of a tall rectangular metal cabinet with a side shelf, no text or symbols present

INSTRUCTIONS FOR LOCK

Sharp object against this hole.

1. Enter the old password and align it with the so
2. Hold the pointed object against the hole, and t dial the desired password.
3. Let go and the password is set.

MAINTENANCE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only repressor estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered by are kindly reminded to verify carefully when you are placing an order with us if you actually saving half in comparison with the top major brands.

MODÈLE : PY-231 6 SS/PY-231 7 SS

Line drawing of a vertical shelf or cabinet with a lid and side shelves (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

AVERTISSEMENT:

Line drawing of a standard threaded bolt with a flanged end (no text or symbols)

KX4

Line drawing of a screw with threaded shaft and threaded end (no text or symbols)

L×6

Line drawing of a pen or stylus with a curved tip and pointed tip (no text or symbols)

M×1

ÉTAPE 1

ÉTAPE 2

NOTE: The side of the board F with "Back" mark, and the side of the turntable base B with the raised stop are all in the back.

ÉTAPE 3

ÉTAPE 4

graph TD
    A[" "] --> B[" "]
    B --> C[" "]

ÉTAPE 5

Line drawing of a multi-tiered mechanical structure with an open box and labeled components (no text or symbols present)

ÉTAPE 6

Line drawing of a tall rectangular metal cabinet with a side shelf, no text or symbols present

INSTRUCTIONS FOR LOCK

Sharp object against this hole.

1. Enter the old password and align it with the so
2. Hold the pointed object against the hole, and t dial the desired password.
3. Let go and the password is set.

MAINTENANCE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only repressor estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered by are kindly reminded to verify carefully when you are placing an order with us if you actually saving half in comparison with the top major brands.

MODEL: PY-231 6 SS/PY-231 7 SS

Line drawing of a vertical shelf or cabinet with a double door and three side compartments (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

! WAARSCHUWING:

Line drawing of a standard threaded bolt with a flanged end (no text or symbols)

KX4

Line drawing of a screw with threaded shaft and threaded end (no text or symbols)

L×6

Line drawing of a pen or stylus with a curved tip and pointed tip (no text or symbols)

M×1

STAP 1

STAP 2

NOTE: The side of the board F with "Back" mark, and the side of the turntable base B with the raised stop are all in the back.

STAP 3

STAP 4

graph TD
    A[" "] --> B[" "]
    B --> C[" "]

STAP 5

Line drawing of a multi-tiered mechanical structure with an open box and labeled components (no text or symbols present)

STAP 6

Line drawing of a tall rectangular metal enclosure with a side shelf, no text or symbols present

INSTRUCTIONS FOR LOCK

Sharp object against this hole.

1. Enter the old password and align it with the so
2. Hold the pointed object against the hole, and t dial the desired password.
3. Let go and the password is set.

MAINTENANCE