ssshkytxs-g - Fitness Equipment Vevor - Free user manual and instructions

USER MANUAL ssshkytxs-g Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

Pull Up Bar Station

ssshkytxs-f; ssshkytxs-g

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Pull Up Bar Station

MODEL: ssshkytxs-f; ssshkytxs-g

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel from contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

Thank you very much for choosing this Pull Up Bar Station

- Please read all of the instructions before using it. The information will help you achieve the best possible results.

INTRODUCTION

SAVE THESE INSTRUCTIONS

WARNING:

Please read all instructions before using this product

It is the Owner's responsibility to ensure that all users of this prod

are fully aware of all warnings and precautions.

• Children or persons with disabilities must be closely supervised when using the boxing ring.
• This product is used only as intended.Do not exceed the rated load
• Do not drop or insert anything into any hole.
• This product for family use only. Do not use this product for any commercial, rental, school or institution.
• Do not use outside.
• Keep the product indoors, away from moisture and dust. Choose a surface with a mat underneath it to protect the floor or carpet. Make there is enough space to install, disassemble, and use this product.

Prohibition sign showing a walking person crossed out of a circle, no text or symbols present

At NO time should pets or children under the age of 12 be closer to the Boxing Stand than 3 m (10 feet). At NO time should children under the age of 12 use the Boxing Stand. Children over the age of 12 should not use the Boxing Stand without adult supervision.

MODEL:ssshkytxs-f ; MODEL:ssshkytxs-g

97 cm 22.5 cm 4.5 cm 10-20 cm 60-100 cm 230 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

97 cm 22.5 cm 4.5 cm 10-20 cm 60-100 cm HEIGHT ADJUSTABLE 190-230 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

PART LIST

NO.	Part Name	Q'ty
1	Bottom connection	1
2	Bottom support tube 1	1
3	Bottom support tube 2	1
4	Central connecting pipe	1
5	Bottom column 1	1
6	Bottom column 2	1
7	Top post	2
8	elbow	2
9	Top connection	1
10	Reducer sleeve 1	2
11	Adjustable pipe	1
12	Back support tube	1
13	Link spacer 1	4

NO.	Part Name	Q'ty
14	Link spacer 2	2
15	Torx handle screw	4
16	Rubber nut 10M	4
17	Reducer sleeve 2	2
18	Suction cup foot cover	4
19	mat	3
20	Rubber handle	8
21	Pipe sleeve	2
22	Pipe plug	2
23	Square tube sleeve	1
24	Pull rope	2
25	Tension rope	2
26	Screw M10x75	8

NO.	Part Name	Q'ty
27	Screw M10X45	8
28	Screw M8X16	2
29	Screw M8X35	2
30	Handle screw	1
31	Inner hexagon screw 8x35	4
32	Inner hexagon screw 6X16	12
33	Lock nut M10	16

NO.	Part Name	Q'ty
34	Lock nut M8	2
35	Arc pad M10	8
36	Gasket M10	8
37	Gasket M8	4
38	Gasket M10X25	4
39	Open end wrench	2
40	Hexagon handle	1

1x1	2x1	3x1	x1
5x1	6x1	7x2	8x2
x1	10x2	11x1	12x1

Simple line drawing of a rectangular metal plate with two circular holes (no text or symbols)

Simple line drawing of a flower-shaped object with a central circular element and a vertical stem (no text or symbols)

Simple line drawing of a 3D object resembling a curved, dome-like structure on a circular base (no text or symbols)

Simple line drawing of a rectangular block with rounded corners (no text or symbols)

Simple line drawing of a curved object resembling a tool or device (no text or symbols)

25	26	27	28
29x2	30x1	31x4	32x12
33x16	34x2	35x8	36x8
37x4	38x4	39x2	40x1

(Note: Only Model ssshkytxs-g contains parts 24 and 25)

ASSEMBLY

Step1 : Install the base part

( Assemble the parts and accessories as shown )

Technical diagram of a mechanical assembly with numbered parts and corresponding X4 component views below.

Mechanical assembly diagram showing two metal frame assemblies with mounting brackets and a close-up inset of the detail (no text or symbols)

Step2 : Install the main body

( Assemble the parts and accessories as shown )

Step2-2 19 Step2-1 Step2-3 5 20 8 6 13 Step2-4 27 X4 29 X2 31 X4 32 X12 33 X4 36 X4 37 X2

Step2-1 : Install the back cushion section

Technical diagram of a mechanical assembly with numbered components for identification

Step2-2 : Install the handle

31 32

Step2-3 : The back cushion section is installed with the main body

37 29

Step2-4 : Install the main body connection rod

27 36 33

Technical illustration of a mechanical support structure with multiple close-up views (no text or symbols)

Step3 : Install top part

(Assemble the parts and accessories as shown)

Technical diagram of a pipe fitting with numbered parts and corresponding X2X2 views for assembly or inspection.

Technical illustration of a metal bracket with a close-up inset showing the pipe connection detail (no text or symbols)

Step4 : Final assembly for the Modeshkytxs-f; (assemble each part as shown)

Technical diagram of a mechanical lifting mechanism with labeled components and motion arrows

16 38 15

Technical diagram of a mechanical assembly with numbered components, likely for engineering or manufacturing documentation.

Model:ssshkytxs-f

Technical illustration of a mechanical support structure with two views (dashed and solid) showing internal components and mounting points (no text or symbols present)

Model:ssshkytxs-g (add pull rope)

Technical diagram of a mechanical lifting device with labeled components and zoomed-in views for part 24 and 25.

Cleaning and Maintenance

-Use a soft, clean cloth that will not scratch the surface when dustin
-This item could be cleaned with soap and water. Be sure to avoid h solvents and abrasives.
- Periodically (every 90 days) make sure the screws are fully tightened

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Prohibition sign showing a walking person crossed out by a diagonal line (no text or symbols)

At NO time should pets or children under the age of 12 be closer to the Boxing Stand than 3 m (10 feet). At NO time should children under the age of 12 use the Boxing Stand. Children over the age of 12 should not use the Boxing Stand without adult supervision.

PARAMÈTRE DU PRODUIT

MODÈLE : ssshkytxs-f ; MODÈLE : ssshkytxs-g

97 cm 22.5 cm 4.5 cm 10-20 cm 60-100 cm 230 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

97 cm 22.5 cm 4.5 cm 10-20 cm 60-100 cm HEIGHT ADJUSTABLE 190-230 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

LISTE DES PIÈCES

NO.	Part Name	Q'ty
1	Bottom connection	1
2	Bottom support tube 1	1
3	Bottom support tube 2	1
4	Central connecting pipe	1
5	Bottom column 1	1
6	Bottom column 2	1
7	Top post	2
8	elbow	2
9	Top connection	1
10	Reducer sleeve 1	2
11	Adjustable pipe	1
12	Back support tube	1
13	Link spacer 1	4

NO.	Part Name	Q'ty
14	Link spacer 2	2
15	Torx handle screw	4
16	Rubber nut 10M	4
17	Reducer sleeve 2	2
18	Suction cup foot cover	4
19	mat	3
20	Rubber handle	8
21	Pipe sleeve	2
22	Pipe plug	2
23	Square tube sleeve	1
24	Pull rope	2
25	Tension rope	2
26	Screw M10x75	8

NO.	Part Name	Q'ty
27	Screw M10X45	8
28	Screw M8X16	2
29	Screw M8X35	2
30	Handle screw	1
31	Inner hexagon screw 8x35	4
32	Inner hexagon screw 6X16	12
33	Lock nut M10	16

NO.	Part Name	Q'ty
34	Lock nut M8	2
35	Arc pad M10	8
36	Gasket M10	8
37	Gasket M8	4
38	Gasket M10X25	4
39	Open end wrench	2
40	Hexagon handle	1

1x1	2x1	3x1	x1
5x1	6x1	7x2	8x2
6x1	10x2	11x1	12x1

Simple line drawing of a coiled cable or rope with a loop handle (no text or symbols)

25	26x8	27x8	28x2
29x2	30x1	31x4	32x12
33x16	34x2	35x8	36x8
37x4	38x4	39x2	40x1

Technical diagram of a mechanical assembly with numbered components and corresponding X4 parts for identification.

Mechanical assembly diagram showing two metal frame assemblies with red fasteners and mounting brackets, one highlighted with a dashed circle (no text or symbols present)

Exploded view diagram of a mechanical assembly with numbered components for identification

Technical illustration of a mechanical support structure with multiple close-up views (no text or symbols)

Technical diagram showing exploded and assembled parts of a pipe fitting with numbered annotations and X2 component diagrams below.

Technical illustration of a metal pipe support structure with an inset close-up showing the same pipe detail (no text or symbols present)

Technical diagram showing assembly steps and component labels for a mechanical assembly, including parts numbered 14 to 38.

Technical diagram of a mechanical lifting device with labeled components and zoomed-in views for part 24 and 25

A/S YH Consulting Limited Bureau 147, Centurion

Maison, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Prohibition sign showing a walking stick crossed out of a circle, no text or symbols present

At NO time should pets or children under the age of 12 be closer to the Boxing Stand than 3 m (10 feet). At NO time should children under the age of 12 use the Boxing Stand. Children over the age of 12 should not use the Boxing Stand without adult supervision.

PRODUKTPARAMETER

MODELL:ssshkytxs-gMODELL:ssshkytx

97 cm 22.5 cm 4.5 cm 10-20 cm 230 cm 60-100 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

97 cm 22.5 cm 4.5 cm 10-20 cm 60-100 cm HEIGHT ADJUSTABLE 190-230 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

TEILELISTE

NO.	Part Name	Q'ty
1	Bottom connection	1
2	Bottom support tube 1	1
3	Bottom support tube 2	1
4	Central connecting pipe	1
5	Bottom column 1	1
6	Bottom column 2	1
7	Top post	2
8	elbow	2
9	Top connection	1
10	Reducer sleeve 1	2
11	Adjustable pipe	1
12	Back support tube	1
13	Link spacer 1	4

NO.	Part Name	Q'ty
14	Link spacer 2	2
15	Torx handle screw	4
16	Rubber nut 10M	4
17	Reducer sleeve 2	2
18	Suction cup foot cover	4
19	mat	3
20	Rubber handle	8
21	Pipe sleeve	2
22	Pipe plug	2
23	Square tube sleeve	1
24	Pull rope	2
25	Tension rope	2
26	Screw M10x75	8

NO.	Part Name	Q'ty
27	Screw M10X45	8
28	Screw M8X16	2
29	Screw M8X35	2
30	Handle screw	1
31	Inner hexagon screw 8x35	4
32	Inner hexagon screw 6X16	12
33	Lock nut M10	16

NO.	Part Name	Q'ty
34	Lock nut M8	2
35	Arc pad M10	8
36	Gasket M10	8
37	Gasket M8	4
38	Gasket M10X25	4
39	Open end wrench	2
40	Hexagon handle	1

1x1	2x1	3x1	x1
5x1	6x1	72	8x2
6x1	10x2	11x1	12x1

Simple line drawing of a flower-shaped mechanical component with a central circular element and a vertical stem (no text or symbols)

Simple line drawing of a 3D rectangular object on a circular base (no text or symbols)

Simple line drawing of a coiled cable or rope with a loop handle (no text or symbols)

25	26	27	28
29x2	30x1	31x4	32x12
33x16	34x2	35x8	36x8
37x4	38x4	39x2	40x1

Technical diagram of a mechanical assembly with numbered components and corresponding X4 parts for identification.

Mechanical assembly diagram showing two metal frame assemblies with red fasteners and mounting brackets, one highlighted with a dashed circle (no text or symbols present)

Exploded view diagram of a mechanical assembly with numbered components for identification

Technical illustration of a mechanical support structure with multiple close-up views (no text or symbols)

Technical diagram showing pipe fittings and component assembly with numbered parts and X2X2 labels

Technical illustration of a pipe clamp assembly with a close-up inset showing the same component (no text or symbols present)

Technical diagram showing assembly steps and component labels for a mechanical assembly, including parts numbered 14 to 38.

Modell:ssshkytxs-f

Technical diagram of a mechanical lifting device with labeled components and zoomed-in views for part 24 and 25

C/O YH Consulting Limited Office 147, Centurion Haus, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Prohibition sign showing a walking stick crossed out of a circle, no text or symbols present

At NO time should pets or children under the age of 12 be closer to the Boxing Stand than 3 m (10 feet). At NO time should children under the age of 12 use the Boxing Stand. Children over the age of 12 should not use the Boxing Stand without adult supervision.

PARAMETRO PRODOTTO

MODELLO:ssshkytxs-gMODELLO:ssshkytx

97 cm 22.5 cm 4.5 cm 10-20 cm 60-100 cm 230 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

97 cm 22.5 cm 4.5 cm 10-20 cm 60-100 cm HEIGHT ADJUSTABLE 190-230 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

ELENCO DEI PEZZI

NO.	Part Name	Q'ty
1	Bottom connection	1
2	Bottom support tube 1	1
3	Bottom support tube 2	1
4	Central connecting pipe	1
5	Bottom column 1	1
6	Bottom column 2	1
7	Top post	2
8	elbow	2
9	Top connection	1
10	Reducer sleeve 1	2
11	Adjustable pipe	1
12	Back support tube	1
13	Link spacer 1	4

NO.	Part Name	Q'ty
14	Link spacer 2	2
15	Torx handle screw	4
16	Rubber nut 10M	4
17	Reducer sleeve 2	2
18	Suction cup foot cover	4
19	mat	3
20	Rubber handle	8
21	Pipe sleeve	2
22	Pipe plug	2
23	Square tube sleeve	1
24	Pull rope	2
25	Tension rope	2
26	Screw M10x75	8

NO.	Part Name	Q'ty
27	Screw M10X45	8
28	Screw M8X16	2
29	Screw M8X35	2
30	Handle screw	1
31	Inner hexagon screw 8x35	4
32	Inner hexagon screw 6X16	12
33	Lock nut M10	16

NO.	Part Name	Q'ty
34	Lock nut M8	2
35	Arc pad M10	8
36	Gasket M10	8
37	Gasket M8	4
38	Gasket M10X25	4
39	Open end wrench	2
40	Hexagon handle	1

1x1	2x1	3x1	x1
5x1	6x1	7x2	8x2
6x1	10x2	11x1	12x1

Simple line drawing of a coiled cable or rope with a loop handle (no text or symbols)

25	26	27	28
29x2	30x1	31x4	32x12
33x16	34x2	35x8	36x8
37x4	38x4	39x2	40x1

Technical diagram of a mechanical assembly with numbered components and corresponding X4 parts for identification.

Mechanical assembly diagram showing two metal frame assemblies with red fasteners and mounting brackets, one highlighted with a dashed circle (no text or symbols present)

Exploded view diagram of a mechanical assembly with numbered components for identification

Fase 2-2: Installare la maniglia

31 32

Technical illustration of a mechanical support structure with multiple close-up views (no text or symbols)

Technical diagram showing exploded and assembled parts of a pipe fitting with numbered annotations and X2 component diagrams below.

Technical illustration of a metal bracket with two views: one showing a bent support structure and the other showing a curved pipe fitting (no text or symbols present)

Technical diagram of a mechanical lifting mechanism with labeled components and motion arrows

16 38 15

Technical diagram of a mechanical assembly with numbered components, likely for engineering or manufacturing documentation.

Modello:ssshkytxs-f

Technical diagram of a mechanical lifting device with labeled components and zoomed-in views for part 24 and 25.

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

Nuovo Galles del Sud 2122 Australia

C/O YH Consulting Limited Ufficio 147, Centurion

Casa, London Road, Staines-upon-Thames, Surrey, TW184AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Prohibition sign showing a walking person crossed out by a diagonal line (no text or symbols)

At NO time should pets or children under the age of 12 be closer to the Boxing Stand than 3 m (10 feet). At NO time should children under the age of 12 use the Boxing Stand. Children over the age of 12 should not use the Boxing Stand without adult supervision.

PARÁMETRO DEL PRODUCTO

MODELO:ssshkytxs-gMODELO:ssshkytx

97 cm 22.5 cm 4.5 cm 10-20 cm 230 cm 60-100 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

97 cm 22.5 cm 4.5 cm 10-20 cm 60-100 cm HEIGHT ADJUSTABLE 190-230 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

LISTA DE PIEZAS

NO.	Part Name	Q'ty
1	Bottom connection	1
2	Bottom support tube 1	1
3	Bottom support tube 2	1
4	Central connecting pipe	1
5	Bottom column 1	1
6	Bottom column 2	1
7	Top post	2
8	elbow	2
9	Top connection	1
10	Reducer sleeve 1	2
11	Adjustable pipe	1
12	Back support tube	1
13	Link spacer 1	4

NO.	Part Name	Q'ty
14	Link spacer 2	2
15	Torx handle screw	4
16	Rubber nut 10M	4
17	Reducer sleeve 2	2
18	Suction cup foot cover	4
19	mat	3
20	Rubber handle	8
21	Pipe sleeve	2
22	Pipe plug	2
23	Square tube sleeve	1
24	Pull rope	2
25	Tension rope	2
26	Screw M10x75	8

NO.	Part Name	Q'ty
27	Screw M10X45	8
28	Screw M8X16	2
29	Screw M8X35	2
30	Handle screw	1
31	Inner hexagon screw 8x35	4
32	Inner hexagon screw 6X16	12
33	Lock nut M10	16

NO.	Part Name	Q'ty
34	Lock nut M8	2
35	Arc pad M10	8
36	Gasket M10	8
37	Gasket M8	4
38	Gasket M10X25	4
39	Open end wrench	2
40	Hexagon handle	1

1x1	2x1	3x1	x1
5x1	6x1	7x2	8x2
6x1	10x2	11x1	12x1

Simple line drawing of a rectangular plate with two circular holes (no text or symbols)

Simple line drawing of a ribbon or cable with a loop, no text or symbols present

25	26	27	28
29x2	30x1	31x4	32x12
33x16	34x2	35x8	36x8
37x4	38x4	39x2	40x1

Technical diagram of a mechanical assembly with numbered parts and corresponding X4 component images below.

Mechanical assembly diagram showing two metal frame assemblies with red bolts and mounting brackets, one highlighted with a dashed circle (no text or symbols present)

Exploded view diagram of a mechanical assembly with numbered components for identification

Paso 2-2: Instale el mango

31 32

Technical illustration of a mechanical support structure with multiple close-up views (no text or symbols)

Technical diagram showing exploded and assembled parts of a pipe fitting with numbered annotations and X2 component diagrams below.

Technical illustration of a pipe clamp assembly with a close-up inset showing the same component (no text or symbols present)

Technical diagram showing assembly steps and component labels for a mechanical assembly, including parts numbered 14 to 38.

Modelo:ssshkytxs-f

Technical diagram of a mechanical lifting device with labeled components and zoomed-in views for part 24 and 25

Casa, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Prohibition sign showing a walking person crossed out by a diagonal line (no text or symbols)

At NO time should pets or children under the age of 12 be closer to the Boxing Stand than 3 m (10 feet). At NO time should children under the age of 12 use the Boxing Stand. Children over the age of 12 should not use the Boxing Stand without adult supervision.

PARAMETR PRODUKTU

MODEL:ssshkytxs-f; MODEL:ssshkytxs-g

97 cm 22.5 cm 4.5 cm 10-20 cm 60-100 cm 230 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

97 cm 22.5 cm 4.5 cm 10-20 cm 60-100 cm HEIGHT ADJUSTABLE 190-230 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

LISTA CZEŚCI

NO.	Part Name	Q'ty
1	Bottom connection	1
2	Bottom support tube 1	1
3	Bottom support tube 2	1
4	Central connecting pipe	1
5	Bottom column 1	1
6	Bottom column 2	1
7	Top post	2
8	elbow	2
9	Top connection	1
10	Reducer sleeve 1	2
11	Adjustable pipe	1
12	Back support tube	1
13	Link spacer 1	4

NO.	Part Name	Q'ty
14	Link spacer 2	2
15	Torx handle screw	4
16	Rubber nut 10M	4
17	Reducer sleeve 2	2
18	Suction cup foot cover	4
19	mat	3
20	Rubber handle	8
21	Pipe sleeve	2
22	Pipe plug	2
23	Square tube sleeve	1
24	Pull rope	2
25	Tension rope	2
26	Screw M10x75	8

NO.	Part Name	Q'ty
27	Screw M10X45	8
28	Screw M8X16	2
29	Screw M8X35	2
30	Handle screw	1
31	Inner hexagon screw 8x35	4
32	Inner hexagon screw 6X16	12
33	Lock nut M10	16

NO.	Part Name	Q'ty
34	Lock nut M8	2
35	Arc pad M10	8
36	Gasket M10	8
37	Gasket M8	4
38	Gasket M10X25	4
39	Open end wrench	2
40	Hexagon handle	1

1x1	2x1	3x1	x1
5x1	6x1	72	8x2
6x1	10x2	11x1	12x1

Simple line drawing of a flower-shaped mechanical component with a central circular element and a vertical stem (no text or symbols)

Simple line drawing of a 3D rectangular object on a circular base (no text or symbols)

Simple line drawing of a coiled cable or rope with a loop handle (no text or symbols)

25	26x8	27x8	28x2
29x2	30x1	31x4	32x12
33x16	34x2	35x8	36x8
37x4	38x4	39x2	40x1

Mechanical assembly diagram showing two metal frame assemblies with red bolts and mounting brackets, one highlighted with a dashed circle (no text or symbols present)

Technical diagram of a mechanical assembly with numbered components for identification

Krok 2-2: Zainstaluj uchwyt

31 32

Technical illustration of a mechanical support structure with multiple close-up views (no text or symbols)

Technical diagram showing exploded and assembled parts of a pipe fitting with numbered annotations and X2 component diagrams below.

Technical illustration of a metal pipe bracket with a close-up inset showing the detail (no text or symbols)

Technical diagram showing assembly steps and component labels for a mechanical assembly, including parts numbered 14 to 38.

Model:ssshkytxs-f

Technical diagram of a mechanical lifting device with labeled components and zoomed-in views for part 24 and 25

C/O YH Consulting Limited Biuro 147, Centurion

Dom, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

HULP NODIG? NEEM CONTACT MET ONS OP!

WAARSCHUWING: OM HET RISICO OP LETSEL TE VERMINDEREN.

BEWAAR DEZE INSTRUCTIES

WAARSCHUWING:

Prohibition sign showing a walking person crossed out by a diagonal line (no text or symbols)

At NO time should pets or children under the age of 12 be closer to the Boxing Stand than 3 m (10 feet). At NO time should children under the age of 12 use the Boxing Stand. Children over the age of 12 should not use the Boxing Stand without adult supervision.

PRODUCTPARAMETER

MODEL:ssshkytxs-f ; MODEL:ssshkytxs-g

97 cm 22.5 cm 4.5 cm 10-20 cm 60-100 cm 230 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

97 cm 22.5 cm 4.5 cm 10-20 cm 60-100 cm HEIGHT ADJUSTABLE 190-230 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

ONDERDELENLIJST

NO.	Part Name	Q'ty
1	Bottom connection	1
2	Bottom support tube 1	1
3	Bottom support tube 2	1
4	Central connecting pipe	1
5	Bottom column 1	1
6	Bottom column 2	1
7	Top post	2
8	elbow	2
9	Top connection	1
10	Reducer sleeve 1	2
11	Adjustable pipe	1
12	Back support tube	1
13	Link spacer 1	4

NO.	Part Name	Q'ty
14	Link spacer 2	2
15	Torx handle screw	4
16	Rubber nut 10M	4
17	Reducer sleeve 2	2
18	Suction cup foot cover	4
19	mat	3
20	Rubber handle	8
21	Pipe sleeve	2
22	Pipe plug	2
23	Square tube sleeve	1
24	Pull rope	2
25	Tension rope	2
26	Screw M10x75	8

NO.	Part Name	Q'ty
27	Screw M10X45	8
28	Screw M8X16	2
29	Screw M8X35	2
30	Handle screw	1
31	Inner hexagon screw 8x35	4
32	Inner hexagon screw 6X16	12
33	Lock nut M10	16

NO.	Part Name	Q'ty
34	Lock nut M8	2
35	Arc pad M10	8
36	Gasket M10	8
37	Gasket M8	4
38	Gasket M10X25	4
39	Open end wrench	2
40	Hexagon handle	1

1x1	2x1	3x1	x1
5x1	6x1	7x2	8x2
6x1	10x2	11x1	12x1

Simple line drawing of a coiled cable or rope with a loop handle (no text or symbols)

25	26	27	28
29x2	30x1	31x4	32x12
33x16	34x2	35x8	36x8
37x4	38x4	39x2	40x1

Technical diagram of a mechanical assembly with numbered components and corresponding X4 parts for identification.

Mechanical assembly diagram showing two metal frame assemblies with red bolts and mounting brackets, one highlighted with a dashed circle (no text or symbols present)

Exploded view diagram of a mechanical assembly with numbered components for identification

Stap 2-2: Installeer de handgreep

31 32

Technical illustration of a mechanical support structure with multiple close-up views (no text or symbols)

Technical diagram showing exploded and assembled parts of a pipe fitting with numbered annotations and X2 component diagrams below.

Technical illustration of a metal pipe bracket with a close-up inset showing the detail (no text or symbols)

Technical diagram of a mechanical lifting mechanism with labeled components and motion arrows

16 38 15

Technical diagram of a mechanical assembly with numbered components, likely for engineering or manufacturing documentation.

Model:ssshkytxs-f

Technical diagram of a mechanical lifting device with labeled components and zoomed-in views for part 24 and 25

C/O YH Consulting Limited Kantoor 147, Centurion

Huis, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

WARNING: FÖR ATT MINSKA RISKEN FÖR SKADA PÅ PERSONER.

SPARA DESSA INSTRUKTIONER

WARNING:

Prohibition sign showing a walking figure crossed out by a diagonal line, enclosed in a circle (no text or symbols)

At NO time should pets or children under the age of 12 be closer to the Boxing Stand than 3 m (10 feet). At NO time should children under the age of 12 use the Boxing Stand. Children over the age of 12 should not use the Boxing Stand without adult supervision.

PRODUKTPARAMETER

MODELL:ssshkytxs-f ; MODELL:ssshkytxs-g

97 cm 22.5 cm 4.5 cm 10-20 cm 60-100 cm 230 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

97 cm 22.5 cm 4.5 cm 10-20 cm 60-100 cm HEIGHT ADJUSTABLE 190-230 cm 130 cm 126 cm 108 cm 64 cm 76.5 cm 92 cm

DELLISTA

NO.	Part Name	Q'ty
1	Bottom connection	1
2	Bottom support tube 1	1
3	Bottom support tube 2	1
4	Central connecting pipe	1
5	Bottom column 1	1
6	Bottom column 2	1
7	Top post	2
8	elbow	2
9	Top connection	1
10	Reducer sleeve 1	2
11	Adjustable pipe	1
12	Back support tube	1
13	Link spacer 1	4

NO.	Part Name	Q'ty
14	Link spacer 2	2
15	Torx handle screw	4
16	Rubber nut 10M	4
17	Reducer sleeve 2	2
18	Suction cup foot cover	4
19	mat	3
20	Rubber handle	8
21	Pipe sleeve	2
22	Pipe plug	2
23	Square tube sleeve	1
24	Pull rope	2
25	Tension rope	2
26	Screw M10x75	8

NO.	Part Name	Q'ty
27	Screw M10X45	8
28	Screw M8X16	2
29	Screw M8X35	2
30	Handle screw	1
31	Inner hexagon screw 8x35	4
32	Inner hexagon screw 6X16	12
33	Lock nut M10	16

NO.	Part Name	Q'ty
34	Lock nut M8	2
35	Arc pad M10	8
36	Gasket M10	8
37	Gasket M8	4
38	Gasket M10X25	4
39	Open end wrench	2
40	Hexagon handle	1

1x1	2x1	3x1	x1
5x1	6x1	7x2	8x2
6x1	10x2	11x1	12x1

Simple line drawing of a flower-shaped mechanical component with a central circular element and a vertical stem (no text or symbols)

Simple line drawing of a 3D object resembling a curved, rectangular structure on a circular base (no text or symbols)

Simple line drawing of a coiled cable or rope with a loop handle (no text or symbols)

25	26	27	28
29x2	30x1	31x4	32x12
33x16	34x2	35x8	36x8
37x4	38x4	39x2	40x1

Technical diagram of a mechanical assembly with numbered components and close-up views of parts labeled X4 and numbered 1-35.

Mechanical assembly diagram showing two metal frame assemblies with red bolts and mounting brackets, one highlighted with a dashed circle (no text or symbols present)

Exploded view diagram of a mechanical assembly with numbered components for identification

Steg 2-2: Installera handtaget

31 32

Technical illustration of a mechanical support structure with multiple close-up views (no text or symbols)

Technical diagram showing exploded and assembled parts of a pipe fitting with numbered annotations and X2 component diagrams below.

Technical illustration of a metal bracket with two views: one showing a bent support structure and the other showing a curved pipe fitting (no text or symbols present)

Technical diagram of a mechanical lifting mechanism with labeled components and motion arrows

16 38 15

Technical diagram of a mechanical assembly with numbered components, likely for engineering or manufacturing documentation.

Modell:ssshkytxs-f

Technical diagram of a mechanical lifting device with labeled components and zoomed-in views for part 24 and 25.

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support