SDC-31-1 - Folding bed Vevor - Free user manual and instructions
Find the device manual for free SDC-31-1 Vevor in PDF.
User questions about SDC-31-1 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Folding bed in PDF format for free! Find your manual SDC-31-1 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SDC-31-1 by Vevor.
USER MANUAL SDC-31-1 Vevor
Technical Support and E-Warranty Certificate www.vevor.com/support
ROLLAWAY BEDS
USER MANUAL
SDC-31-1
SDC-31-2
SDC-36-1
SDC-36-2
We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.
MODEL:SDC-31-1 SDC-31-2 SDC-36-1 SDC-36-2
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.
WARNING:
Read this material before using this product. Failure to do so can result in serious injury.
Assembly precautions
- Assemble only according to these instructions. Improper assembly may create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble if tired or when under the influence of alcohol, or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard and smooth surface capable of sa supporting the Rollaway Beds.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unw and separate all parts in a clean work area.
Use precautions
- DO NOT SIT OR STAND ON THIS ITEM.
- This product is not a toy. Do not allow children to play with or in item.
- Do not exceed specified weight capacities.
- Use only on a flat, level, hard, and smooth surface that can safe support a fully loaded Rollaway Beds.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damag
SAVE THIS MANUAL
PARTS LIST
Mattress
Open packing bag, leave the mattress to expand. Sometimes it only takes a few hours, but other times it can take up to 48 hours to fully expand.
Mattress recovery schedule
| Recovery time | Recovery ratio |
| 1 hour | 90 % |
| 3 hours | 94 % |
| 24 hours | 97 % |
| 48 hours | 98 % |
Wheels
①x4pcs
M6 x 35
② x8pcs
$$ M 6 \times 1 5 $$
(3)
4mm Allen Key
5mm Allen Key
(Used for tighentening the wheels and special screws.)
Step 2
Note: Please don't tighten the screws in Step 1, after aligning all of the holes on the frame(Step 2), then tighten all the screws.
Step 3
Step 4
Step 5
Step 6
CAUTION
This step is necessary. Otherwise it will cause component deformation.
Step 7
Step 8
Step 9
When moving the folding bed, please do NOT pull the strap.
| Model | Safe Loading Weight | Product Size |
| SDC-31-1 | 300 lbs | 1900*810*430 mm |
| SDC-31-2 | 1900*810*460 mm | |
| SDC-36-1 | 450 lbs | 1900*965*430 mm |
| SDC-36-2 | 1900*965*460 mm |
Manufacturer: Shanghaiuxinmuyeyouxianggsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
| EC | REP |
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt am Main
| UK | REP |
YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
Technical Support and E-Warranty Certificate
www.vevor.com/support
VEVOR
TOUGH TOOLS, HALF PRICE
Assistance technique et certificat de garantie electronique www.vevor.com/support
LITS D'EXTÉRIEUR
MANUEL D'UTILISATION
SDC-31-1
SDC-31-2
SDC-36-1
SDC-36-2
Open packing bag, leave the mattress to expand. Sometimes it only takes a few hours, but other times it can take up to 48 hours to fully expand.
Mattress recovery schedule
| Recovery time | Recovery ratio |
| 1 hour | 90 % |
| 3 hours | 94 % |
| 24 hours | 97 % |
| 48 hours | 98 % |
Wheels
①x4pcs
M6 x 35
② x 8pcs
M6 x 15
(3)
4mm Allen Key
5mm Allen Key (Used for tighentening the wheels and special screws.)
ÉTAPE D'ASSEMBLAGE
Step 2
Note: Please don't tighten the screws in Step 1, after aligning all of the holes on the frame(Step 2), then tighten all the screws.
Step 5
When installing part A, please insert it as far as it can, and tighten the screws as below enlarged image.
If part A can't be inserted successfully, please loosen the bolt as shown in the picture.
Step 6
CAUTION
This step is necessary.
Otherwise it will cause component deformation.
Step 7
Step 8
Step 9
When moving the folding bed, please do NOT pull the strap.
PARAMÉTRE DU PRODUIT
A/S YH Consulting Limited Bureau 147, Centurion, Maison, London Road, Staines-upon-Thames, Surrey TW18 4AX
VEVOR
TOUGH TOOLS, HALF PRICE
Open packing bag, leave the mattress to expand. Sometimes it only takes a few hours, but other times it can take up to 48 hours to fully expand.
Mattress recovery schedule
| Recovery time | Recovery ratio |
| 1 hour | 90 % |
| 3 hours | 94 % |
| 24 hours | 97 % |
| 48 hours | 98 % |
Wheels
①x4pcs
M6 x 35
② x 8pcs
M6 x 15
(3)
4mm Allen Key
5mm Allen Key (Used for tighentening the wheels and special screws.)
MONTAGESTRITT
Step 2
Note: Please don't tighten the screws in Step 1, after aligning all of the holes on the frame(Step 2), then tighten all the screws.
Step 5
When installing part A, please insert it as far as it can, and tighten the screws as below enlarged image.
If part A can't be inserted successfully, please loosen the bolt as shown in the picture.
Step 6
CAUTION
This step is necessary.
Otherwise it will cause component deformation.
Step 7
Step 8
Step 9
When moving the folding bed, please do NOT pull the strap.
PRODUKPARAMETER
| Modell | Sicheres Ladegewicht | Produktgroße |
| SDC-31-1 | 300 Pfund | 1900*810*430 mm |
| SDC-31-2 | 1900*810*460 mm | |
| SDC-36-1 | 450 Pfund | 1900*965*430 mm |
| SDC-36-2 | 1900*965*460 mm |
Hersteller: Shanghaiuxinmuyeyouxiangonsi
Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.
Nach AUS importiert: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien
Importiert in die USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Ort, Rancho Cucamonga, CA 91730
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt am Main.
YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147, Centurion Haus, London Road, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR
TOUGH TOOLS, HALF PRICE
Open packing bag, leave the mattress to expand. Sometimes it only takes a few hours, but other times it can take up to 48 hours to fully expand.
Mattress recovery schedule
| Recovery time | Recovery ratio |
| 1 hour | 90 % |
| 3 hours | 94 % |
| 24 hours | 97 % |
| 48 hours | 98 % |
Wheels
①x4pcs
M6 x 35
② x 8pcs
M6 x 15
(3)
4mm Allen Key
5mm Allen Key (Used for tighentening the wheels and special screws.)
FASE DI MONTAGGIO
Step 2
Note: Please don't tighten the screws in Step 1, after aligning all of the holes on the frame(Step 2), then tighten all the screws.
Step 5
When installing part A, please insert it as far as it can, and tighten the screws as below enlarged image.
If part A can't be inserted successfully, please loosen the bolt as shown in the picture.
Step 6
CAUTION
This step is necessary.
Otherwise it will cause component deformation.
Step 7
Step 8
Step 9
When moving the folding bed, please do NOT pull the strap.
PARAMETRO PRODOTTO
Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD
Nuovo Galles del Sud 2122 Australia
C/O YH Consulting Limited Ufficio 147, Centurion
Casa, London Road, Staines-upon-Thames, Surrey, TW184AX
VEVOR
TOUGH TOOLS, HALF PRICE
Open packing bag, leave the mattress to expand. Sometimes it only takes a few hours, but other times it can take up to 48 hours to fully expand.
Mattress recovery schedule
| Recovery time | Recovery ratio |
| 1 hour | 90 % |
| 3 hours | 94 % |
| 24 hours | 97 % |
| 48 hours | 98 % |
Wheels
①x4pcs
M6 x 35
② x 8pcs
M6 x 15
(3)
4mm Allen Key
5mm Allen Key (Used for tighentening the wheels and special screws.)
PASO DE MONTAJE
Step 2
Note: Please don't tighten the screws in Step 1, after aligning all of the holes on the frame(Step 2), then tighten all the screws.
Step 5
When installing part A, please insert it as far as it can, and tighten the screws as below enlarged image.
If part A can't be inserted successfully, please loosen the bolt as shown in the picture.
Step 6
CAUTION
This step is necessary.
Otherwise it will cause component deformation.
Step 7
Step 8
Step 9
When moving the folding bed, please do NOT pull the strap.
PARÁMETRO DEL PRODUCTO
| Modelo | Peso dearga segura | Tamañodel producto |
| SDC-31-1 | 300 libras | 1900*810*430 milimetros |
| SDC-31-2 | 1900*810*460 milimetros | |
| SDC-36-1 | 450 libras | 1900*965*430 milimetros |
| SDC-36-2 | 1900*965*460 milimetros |
Fabricante: Shanghaiuxinmuyeyouxiangongsi
Dirección: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
C/O YH Consulting Limited Oficina 147, Centurion Casa, London Road, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR
TOUGH TOOLS, HALF PRICE
Soporte专业技术o y certificate de garantia electrònica www.vevor.com/support
VEVOR
TOUGH TOOLS, HALF PRICE
Open packing bag, leave the mattress to expand. Sometimes it only takes a few hours, but other times it can take up to 48 hours to fully expand.
Mattress recovery schedule
| Recovery time | Recovery ratio |
| 1 hour | 90 % |
| 3 hours | 94 % |
| 24 hours | 97 % |
| 48 hours | 98 % |
Wheels
(1) x 4 pcs
M6×35
② x8pcs
M6 x 15
③
4mm Allen Key
5mm Allen Key (Used for tighentening the wheels and special screws.)
KROK MONTAZU
Step 2
Note: Please don't tighten the screws in Step 1, after aligning all of the holes on the frame(Step 2), then tighten all the screws.
Step 5
When installing part A, please insert it as far as it can, and tighten the screws as below enlarged image.
If part A can't be inserted successfully, please loosen the bolt as shown in the picture.
Step 6
CAUTION
This step is necessary.
Otherwise it will cause component deformation.
Step 7
Step 8
Step 9
When moving the folding bed, please do NOT pull the strap.
PARAMETR PRODUKTU
C/O YH Consulting Limited Biuro 147, Centurion Dom, London Road, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR
TOUGH TOOLS, HALF PRICE
HULP NODIG? NEEM CONTACT MET ONS OP!
Open packing bag, leave the mattress to expand. Sometimes it only takes a few hours, but other times it can take up to 48 hours to fully expand.
Mattress recovery schedule
| Recovery time | Recovery ratio |
| 1 hour | 90 % |
| 3 hours | 94 % |
| 24 hours | 97 % |
| 48 hours | 98 % |
Wheels
(1) x 4 pcs
M6×35
② x8pcs
M6 x 15
(3)
4mm Allen Key
5mm Allen Key (Used for tighentening the wheels and special screws.)
MONTAGESTAP
Step 2
Note: Please don't tighten the screws in Step 1, after aligning all of the holes on the frame(Step 2), then tighten all the screws.
Step 5
When installing part A, please insert it as far as it can, and tighten the screws as below enlarged image.
If part A can't be inserted successfully, please loosen the bolt as shown in the picture.
Step 6
CAUTION
This step is necessary.
Otherwise it will cause component deformation.
Step 7
Step 8
Step 9
When moving the folding bed, please do NOT pull the strap.
PRODUCTPARAMETER
| Model | Veilig laadgewicht | Productgrootte |
| SDC-31-1 | 300 pond | 1900*810*430mm |
| SDC-31-2 | 1900*810*460mm | |
| SDC-36-1 | 450 pond | 1900*965*430mm |
| SDC-36-2 | 1900*965*460mm |
Fabrikant: Shanghaiuxinmuyeyouxianggsi
Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Geimporteerdaar AUS:SIHAO PTY LTD.1ROKEVA STREETEASTWOOD NSW2122 Australie
C/O YH Consulting Limited Kantoor 147, Centurion Huis, London Road, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR
TOUGH TOOLS, HALF PRICE
Technische ondersteuning en e-garantiecertificaat www.vevor.com/support
VEVOR
TOUGH TOOLS, HALF PRICE
Open packing bag, leave the mattress to expand. Sometimes it only takes a few hours, but other times it can take up to 48 hours to fully expand.
Mattress recovery schedule
| Recovery time | Recovery ratio |
| 1 hour | 90 % |
| 3 hours | 94 % |
| 24 hours | 97 % |
| 48 hours | 98 % |
Wheels
①x4pcs
M6 x 35
(2) x 8pcs
M6 x 15
(3)
4mm Allen Key
5mm Allen Key (Used for tighentening the wheels and special screws.)
MONTERINGSTEG
Step 2
Note: Please don't tighten the screws in Step 1, after aligning all of the holes on the frame(Step 2), then tighten all the screws.
Step 5
When installing part A, please insert it as far as it can, and tighten the screws as below enlarged image.
If part A can't be inserted successfully, please loosen the bolt as shown in the picture.
Step 6
CAUTION
This step is necessary.
Otherwise it will cause component deformation.
Step 7
Step 8
Step 9
When moving the folding bed, please do NOT pull the strap.
PRODUKPARAMETER
| Modell | Säker lastvikt | Produktstorlek |
| SDC-31-1 | 300 lbs | 1900*810*430 mm |
| SDC-31-2 | 1900*810*460 mm | |
| SDC-36-1 | 450 lbs | 1900*965*430 mm |
| SDC-36-2 | 1900*965*460 mm |
Tillverkare: Shanghaimixinmuyeyouxiangonsi
Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien
Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt am Main.
YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR
TOUGH TOOLS, HALF PRICE
www.vevor.com/support
