Vevor ALF-002 - Table

ALF-002 - Table Vevor - Free user manual and instructions

Find the device manual for free ALF-002 Vevor in PDF.

📄 96 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Vevor ALF-002 - page 90
90 / 96
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Vevor
Model ALF-002
Product Type Table
Dimensions (L x W x H) Approximately 180 x 75 x 74 cm
Weight Approximately 15 kg
Material Steel and composite panels
Power Supply None (non-electric product)
Intended Use Indoor and covered outdoor
Assembly Required Yes, tools not included (13mm wrench, 13mm socket)
Load Capacity Approximately 50 kg (estimate)
Warranty Manufacturer's warranty, support via www.vevor.com/support
Care and Cleaning Clean with a damp cloth and mild detergent
Safety Tighten all screws properly; small parts dangerous for children
Spare Parts and Repairability Contact Vevor after-sales service for spare parts
General Information Made for Vevor; technical support and electronic warranty certificate available online

Frequently Asked Questions - ALF-002 Vevor

What are the dimensions of the ALF-002 table?
The approximate dimensions are 180 cm long, 75 cm wide, and 74 cm high. For precise measurements, please refer to the manual.
What is the weight of the table?
The weight is approximately 15 kg, making it easy to move once assembled.
Does the table require assembly?
Yes, assembly is required. You will need a 13 mm wrench and a 13 mm socket (not included). Follow the steps in the manual.
What is the maximum load capacity?
The load capacity is estimated at approximately 50 kg for normal use. Do not exceed this limit to avoid any risk of tipping.
Is the table suitable for outdoor use?
It can be used in covered outdoor areas, but it is recommended to protect it from weather to extend its lifespan.
How to clean and maintain the table?
Clean it with a damp cloth and mild detergent. Avoid abrasive products that could damage the surface.
What to do in case of missing or damaged parts?
Take photos of the box and damaged parts, then contact Vevor customer service through the marketplace where you purchased the product.
Is the table stable after assembly?
Yes, if all screws are properly tightened and the table is placed on a flat surface. Check tightness regularly.
Is there a warranty on the ALF-002 table?
Yes, a manufacturer's warranty applies. For more information, visit www.vevor.com/support.
Can I get spare parts?
Yes, contact Vevor technical support. You will need the model number and photos of the part in question.

User questions about ALF-002 Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Table in PDF format for free! Find your manual ALF-002 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ALF-002 by Vevor.

USER MANUAL ALF-002 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

PICNIC TABLE

MODEL:ALF-002

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

MODEL:ALF-002

Vevor ALF-002 - MODEL:ALF-002 - 1

natural_image Line drawing of a circular table with four petty chairs and a perforated top panel (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

INSTRUCTIONS

  • This manual contains crucial information about safety, warranty, and care. Please read this manual carefully.
  • Retain instructions for future reference.
  • Separate and count all parts and hardware.
  • Read through each step carefully and follow the proper order.
  • We recommend that, where possible, all items are assembled near to area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
    ● Always place the product on a flat, steady and stable surface.
  • Keep all small parts and packaging materials for this product away fro babies and children as they potentially pose a serious choking hazard.

1. Components include

Vevor ALF-002 - Components include - 1

2. Tools Use

REQUIRED TOOLS

(NOT INCLUDED)

1 -13 MM WRENCH

1 - 13 MM SOCKET

NOTE: IT IS IMPORTANT TO KEEP ALL BOLTS FINGER TIGHT DURING ASSEMBLY UNTIL ENTIRE TABLE IS ASSEMBLED

3. Attach Table Legs

Technical diagram of a mechanical assembly with labeled components E, I, H, and G

Technical diagram of a mechanical device with labeled components (A-H), showing cross-sectional and top views.

  1. Attach Support And Seats
    Vevor ALF-002 - Attach Table Legs - 3

F I H G B,C F SQUARE ALL PARTS AND

SQUARE ALL PARTS AND TIGHTEN ALL HARDWARE

DO NOT discard the box / original packaging.

In case a return is required, the item must be returned in original book. Without this your return will not be accepted.

Take a photo of the box markings.

A photo of the markings (text) on the side of the box is required in part is needed for replacement. This helps our staff identify your process number to ensure you receive the correct parts.

Take a photo of the damaged part (if applicable).

A photo of the damage is always required to file a claim and get y replacement or refund processed quickly. Please make sure you have box even if it is damaged.

Send us an email with the images requested.

Email us directly from marketplace where your item was purchased with the attached images and a description of your claim.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

natural_image Line drawing of a four-lobed outdoor table with circular windows and four side tables, no text or symbols present.

BESOIN D'AIDE ? CONTACTEZ-NOUS !

Technical diagram of a mechanical device with labeled components (A-H), showing cross-sectional and top views of internal structure.

YH CONSULTING LIMITED. C/O YH Consulting Limited Bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX.

REPRÉSENTANT CE

E-CrossStu GmbH

Mainzer Landstr.69,

natural_image Line drawing of a four-lobed outdoor table with circular windows and four curved chairs (no text or symbols)

BRAUCHEN SIE HILFE? KONTAKTIEREN SIE UNS!

Technical diagram of a mechanical device with labeled components (A-H), showing cross-sectional and top views of internal structure.

YH CONSULTING LIMITED. C/O YH Consulting Limited Büro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EG-REP

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

natural_image Line drawing of a four-lobed outdoor table with circular girders and four side tables, no text or symbols present.

Technical diagram of a mechanical device with labeled components (A-H), showing cross-sectional and top views of internal structure.

SQUADRA TUTTE LE PARTI E SERRARE TUTTO L'HARDWARE

SQUADRA TUTTE LE PARTI E SERRARE TUTTO L'HARDWARE

ISTRUZIONI PER LA RESTITUZIONE/DENUNCIA DANNI

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

YH CONSULTING LIMITED C/O YH Consulting Limited Ufficio 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX.

REP.CE

E-CrossStu GmbH

Mainzer Landstr.69,

natural_image Line drawing of a four-lobed outdoor table with circular windows and four side tables, no text or symbols present.

¿NECESITAS AYUDA?

Technical diagram of a mechanical device with labeled components (A-H), showing cross-sectional and top views of internal structure.

CUADRAR TODAS LAS PIEZAS Y F I H G B,C

CUADRAR TODAS LAS PIEZAS Y APRIETE TODOS LOS HERRAJES

YH CONSULTING LIMITED C/O YH Consulting Limited Oficina 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX.

REPRESENTANTE DE LA CE

E-CrossStu GmbH

Mainzer Landstr.69,

natural_image Line drawing of a four-lobed outdoor table with circular girders and two side tables, no text or symbols present.

Technical diagram of a mechanical device with labeled components (A-H), showing cross-sectional and top views of internal structure.

F F I H G B,C KWADRATOWE WSZYSTKIE CZĘŚCI ORAZ

DOKREĆ WSZYSTKIE SPRZETY

INSTRUKCJE ZWROTU/REKLAMACJI SZKODY

YH CONSULTING LIMITED. C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

REPREZENT KE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

PICKNICKTAFEL

MODEL:ALF-002

natural_image Line drawing of a four-lobed outdoor table with circular girders and four side tables, no text or symbols present.

HULP NODIG?

Technical diagram of a mechanical device with labeled components (A-H), showing cross-sectional and top views of internal structure.

  1. Bevestig steun en stoelen
    Vevor ALF-002 - HULP NODIG? - 2

Vevor ALF-002 - HULP NODIG? - 3

YH CONSULTING LIMITED C/O YH Consulting Limited Kantoor 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX.

EG REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

PICKNIKBORD

MODELL:ALF-002

natural_image Line drawing of a four-lobed outdoor table with circular girders and four side tables, no text or symbols present.

BEHÖVER HJÄLP?

Technical diagram of a mechanical device with labeled components (A-H), showing cross-sectional and top views of internal structure.

  1. Fäst stöd och säten
    Vevor ALF-002 - BEHÖVER HJÄLP? - 2
natural_image Technical line drawing of a mechanical assembly with multiple pipes and a central circular component (no text or symbols)

NÅGRA KOMPONENTER
BORTTAGAD FÖR DETALJER

BORTTAGAD FÖR DI D I G H

F F I H G B,C KVADRERA ALLA DELAR OCH

STRÄP ALL HÅRDVARA

INSTRUKTIONER FÖR RETUR/SKADINGSKRAV

YH CONSULTING LIMITED C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX.

ECREP

www.vevor.com/support

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : ALF-002

Category : Table