YJXXGZ-001 - Table Vevor - Free user manual and instructions

USER MANUAL YJXXGZ-001 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

SLAB ENTRYWAY TABLE USER MANUAL

MODEL NO.: YJXXGZ-001; YJXXGZ-001-1; YJXXGZ-001-2

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Slab Entryway Table

MODEL NO.: YJXXGZ-001; YJXXGZ-001-1; YJXXGZ-001-2

Line drawing of a simple metal-framed table with a power cord and control panel (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure do so may result in serious injury.

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps that come the package.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly c create hazards.

2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.

3. Keep the assembly area clean and well-lit.

4. Keep bystanders out of the area during assembly.

5. Do not assemble when tired or when under the influence of alcohol drugs or medication.

6. The product capabilities apply to properly and completely assembled products only.

7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Slab Entryway Table.

8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap separate all parts in a clean work area.

SAVE THESE INSTRUCTIONS

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy Do not allow children to play with or r item.

2. Do not exceed weight capacities, before moving.

3. Use only on a flat, hard and smooth surface capable of safely supporting a fully loaded Slab Entryway Table.

4. Use as intended only.

5. Inspect before every use; do not use if parts are loose or damage

TECHNICAL SPECIFICATIONS

Model	YJXXGZ-001	YJXXGZ-001-1YJXXGZ-001-2
Rating(s)	12A 124Vac 60Hz1500W	220-240Vac,50/60Hz, 16A Max
Product Dimensions(LxWxH)(mm)	1800*200*800
Net Weight(kg)	About 8.1

*Products such as specifications, appearance, and design are subject to modification without prior notice.

PACKAGE CONTENTS

1×1	2×1	3×2	4×4
5×2	6×2	7×1	8×1
9×2
A[kwwr]M6×12mm ×4	B[xSZx]M6×28mm ×8	C[GH4y]M6×40mm ×12	D∅3.5×12mm ×2
FM4 ×1	GM4 ×1	H[gcc6]M6 ×5	I×2
J or or

Exploded view diagram of a modular shelving unit with numbered components for identification

ASSEMBLY STEPS

Step 1

M6×40mm

C × 6pcs

M4

F × 1pc

Technical diagram showing labeled components of a mechanical assembly with numbered parts and directional arrows indicating motion or flow.

C C C C F

C ⑥ ⑦ ⑥ C F

Step 2 M6×12mm A × 2pcs M6×40mm C × 4pcs M4 F × 1pc 3 8 3 C A A C F A A C F

Step 3	[GAY]M6×12mmA × 2pcs	M6×40mmC × 2pcs	E × 2pcs	M4F × 1pc
			G × 1pc	M6H × 5pcs

Step 4

M6×28mm

B × 8pcs

M4

F × 1pc

Step 5 Ø3.5×12mm D × 2pcs M4 G × 1pc J× 1pc G D D J

Step 6

1 × 2pcs

1 × 2pcs Wall × 2

Step 7

Line drawing of a simple metal-framed table with a power cord and control panel (no text or symbols)

COMPLETION

Line drawing of a simple metal-framed table with a digital display and cable, no text or symbols present

Correct Disposal

This product is subject to the provision of european Directive 2012/19/EU. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products mark as such may not be discarded with normal domestic waste, but must taken to a collection point for recycling electrical and electronic devices.

FCC Information:

CAUTION: Changes or modifications not expressly approved by the pa responsible for compliance could void the user's authority to operate t equipment!

This device complies with Part 15 of the FCC Rules. Operation is su the following two conditions:

1) This product may cause harmful interference.
2) This product must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the product.

Note: This product has been tested and found to comply with the line a Class B digital device pursuant to Part 15 of the FCC Rules; these are designed to provide reasonable protection against harmful interferer in a residential installation.

This product generates, uses and can radiate radio frequency energy, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If product does cause harmful interference to radio or television reception which can be determined by turning the product off and on, the user encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the distance between the product and the receiver.
• Connect the product to an outlet on a circuit different from that to the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assista

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a two-legged metal shelf with a power outlet and cable (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

1×1	2×1	3×2	4×4
5×2	6×2	7×1	8×1
9×2
AM6×12mm ×4	BM6×28mm ×8	CM6×40mm ×12	D∅3.5×12mm ×2	E×2
FM4 ×1	GM4 ×1	HM6 ×5	I×2
J or or

Exploded view diagram of a modular shelving unit with numbered components for assembly or maintenance reference.

ÉTAPES D'ASSEMBLAGE

Step 1

M6×40mm C × 6pcs M4 F × 1pc

Technical diagram showing labeled components of a mechanical assembly with numbered parts and directional arrows indicating motion.

C C C C F C C

C ⑥ ⑦ ⑥ C F

Step 2 M6×12mm A × 2pcs M6×40mm C × 4pcs M4 F × 1pc 3 8 3 C A A C F A A C F

Step 3 M6×12mm A × 2pcs M6×40mm C × 2pcs E × 2pcs M4 F × 1pc M4 G × 1pc M6 H × 5pcs H G E E A A F H 9 C E A 9 H H C

Step 4

M6×28mm

B × 8pcs

M4

F × 1pc

Step 5 Ø3.5×12mm D × 2pcs M4 G × 1pc J× 1pc G D D J

Step 6

1 × 2pcs Wall × 2

Step 7

Line drawing of a simple metal-framed table with a power outlet and cable (no text or symbols)

ACHÈVEMENT

Line drawing of a simple metal-framed table with a power cord and control panel (no text or symbols)

Symbol of a trash bin crossed with no text or labels, accompanied by a solid black rectangle below (no text or symbols present)

A/S YH Consulting Limited Bureau 147, Centurion

Maison, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELL-NR.: YJXXGZ-001; YJXXGZ-001-1; YJXXGZ-001-2

MODELL-NR.: YJXXGZ-001; YJXXGZ-001-1; YJXXGZ-001-2

Line drawing of a long rectangular metal shelf with a small attached power outlet (no text or symbols)

1×1	2×1	3×2	4×4
5×2	6×2	7×1	8×1
9×2
AM6×12mm ×4	BM6×28mm ×8	CM6×40mm ×12	D∅3.5×12mm ×2	E×2
FM4 ×1	GM4 ×1	HM6 ×5	I×2
J or or

Exploded view diagram of a modular shelving unit with numbered components for assembly or maintenance reference.

MONTAGEANLEITUNG

Step 1

M6×40mm C × 6pcs M4 F × 1pc

Technical diagram showing labeled components of a mechanical assembly with numbered parts and directional arrows indicating motion or assembly.

C C C C F C C

C ⑥ ⑦ ⑥ C F

Step 2 M6×12mm A × 2pcs M6×40mm C × 4pcs M4 F × 1pc 3 8 3 C A A C F A A C F

Step 3 M6×12mm A × 2pcs M6×40mm C × 2pcs E × 2pcs M4 F × 1pc M4 G × 1pc M6 H × 5pcs H G E E A A F H 9 C E A 9 H H C

Step 4

M6×28mm

B × 8pcs

M4

F × 1pc

Step 5 Ø3.5×12mm D × 2pcs M4 G × 1pc J× 1pc G D D J

Step 6

1 × 2pcs Wall × 2

Step 7

Line drawing of a simple metal-framed table with a power cord and control panel (no text or symbols)

FERTIGSTELLUNG

Line drawing of a simple metal-framed table with a power cord and control panel (no text or symbols)

Richtige Entsorgung

Symbol of a trash bin crossed with no visible text or labels

C/O YH Consulting Limited Office 147, Centurion

Haus, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELLO N.: YJXXGZ-001; YJXXGZ-001-1; YJXXGZ-001-2

MODELLO N.: YJXXGZ-001; YJXXGZ-001-1; YJXXGZ-001-2

Line drawing of a simple metal-framed table with a power cord and control panel (no text or symbols)

1×1	2×1	3×2	4×4
5×2	6×2	7×1	8×1
9×2
AM6×12mm ×4	BM6×28mm ×8	CM6×40mm ×12	D∅3.5×12mm ×2	E×2
FM4 ×1	GM4 ×1	HM6 ×5	I×2
J or or

Exploded view diagram of a modular shelving unit with numbered components for assembly or maintenance reference.

FASI DI MONTAGGIO

Step 1

M6×40mm C × 6pcs M4 F × 1pc

Technical diagram showing labeled components of a mechanical assembly with numbered parts and directional arrows indicating motion.

C C C C F C C

C ⑥ ⑦ ⑥ C F

Step 2 M6×12mm A × 2pcs M6×40mm C × 4pcs M4 F × 1pc 3 8 3 C A A C F A A C F

Step 3 M6×12mm A × 2pcs M6×40mm C × 2pcs E × 2pcs M4 F × 1pc M4 G × 1pc M6 H × 5pcs H G E E A A F H 9 C E A 9 H H C

Step 4

M6×28mm

B × 8pcs

M4

F × 1pc

Step 5 Ø3.5×12mm D × 2pcs M4 G × 1pc J× 1pc G D D J

Step 6

1 × 2pcs Wall × 2

Step 7

Line drawing of a simple metal-framed table with a power outlet and cable (no text or symbols)

COMPLETAMENTO

Line drawing of a simple metal-framed table with a power cord and control panel (no text or symbols)

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

Nuovo Galles del Sud 2122 Australia

C/O YH Consulting Limited Ufficio 147, Centurion

Casa, London Road, Staines-upon-Thames, Surrey, TW184AX

VEVOR®

TOUGH TOOLS, HALF PRICE

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a simple metal-framed table with a digital display and cable, no text or symbols present

Exploded view diagram of a modular shelving unit with numbered components for assembly or maintenance reference.

PASOS DE MONTAJE

Step 1

M6×40mm C × 6pcs M4 F × 1pc

Technical diagram showing labeled components of a mechanical assembly with numbered parts and directional arrows indicating motion.

C C C C F C C

C ⑥ ⑦ ⑥ C F

Step 2 M6×12mm A × 2pcs M6×40mm C × 4pcs M4 F × 1pc 3 8 3 C A A C F A A C F

Step 3 M6×12mm A × 2pcs M6×40mm C × 2pcs E × 2pcs M4 F × 1pc M4 G × 1pc M6 H × 5pcs H G E E A A F H 9 C E A 9 H H C

Step 4

M6×28mm

B × 8pcs

M4

F × 1pc

Step 5 Ø3.5×12mm D × 2pcs M4 G × 1pc J× 1pc G D D J

Step 6

1 × 2pcs Wall × 2

Step 7

Line drawing of a simple metal-framed table with a power outlet and cable (no text or symbols)

TERMINACIÓN

Line drawing of a simple metal-framed table with a power cord and control panel (no text or symbols)

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

Casa, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL NO.: YJXXGZ-001; YJXXGZ-001-1; YJXXGZ-001-2

MODEL NO.: YJXXGZ-001; YJXXGZ-001-1; YJXXGZ-001-2

Line drawing of a long rectangular metal shelf with a small attached power outlet (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

Exploded view diagram of a modular shelving unit with numbered components for assembly or maintenance reference.

KROKI MONTAŻU

Step 1

M6×40mm C × 6pcs M4 F × 1pc

Technical diagram showing labeled components of a mechanical assembly with numbered parts and directional arrows indicating motion or assembly.

C C C C F C C

C ⑥ ⑦ ⑥ C F

Step 2 M6×12mm A × 2pcs M6×40mm C × 4pcs M4 F × 1pc 3 8 3 C A A C F A A C F

Step 3 M6×12mm A × 2pcs M6×40mm C × 2pcs E × 2pcs M4 F × 1pc M4 G × 1pc M6 H × 5pcs H G E E A A F H 9 C E A 9 H H C

Step 4

M6×28mm

B × 8pcs

M4

F × 1pc

Step 5 Ø3.5×12mm D × 2pcs M4 G × 1pc J× 1pc G D D J

Step 6

1 × 2pcs

1 × 2pcs Wall × 2

Step 7

Line drawing of a simple metal-framed table with a power cord and control panel (no text or symbols)

UKOŃCZENIE

Line drawing of a simple metal-framed table with a power cord and control panel (no text or symbols)

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

C/O YH Consulting Limited Biuro 147, Centurion Dom, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELNR.: YJXXGZ-001; YJXXGZ-001-1; YJXXGZ-001-2

MODELNR.: YJXXGZ-001; YJXXGZ-001-1; YJXXGZ-001-2

Line drawing of a long rectangular metal shelf with a small attached power outlet (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Exploded view diagram of a modular shelving unit with numbered components for assembly or maintenance reference.

MONTAGESTAPPEN

Step 1

M6×40mm C × 6pcs M4 F × 1pc

Technical diagram showing labeled components of a mechanical assembly with numbered parts and directional arrows indicating motion.

C C C C F C C

C ⑥ ⑦ ⑥ C F

Step 2 M6×12mm A × 2pcs M6×40mm C × 4pcs M4 F × 1pc 3 8 3 C A A C F A A C F

Step 3 M6×12mm A × 2pcs M6×40mm C × 2pcs E × 2pcs M4 F × 1pc M4 G × 1pc M6 H × 5pcs H G E E A A F H 9 C E A 9 H H C

Step 4

M6×28mm

B × 8pcs

M4

F × 1pc

Step 5 Ø3.5×12mm D × 2pcs M4 G × 1pc J× 1pc G D D J

Step 6

1 × 2pcs Wall × 2

Step 7

Line drawing of a simple metal-framed table with a power outlet and cable (no text or symbols)

VOLTOOIING

Line drawing of a simple metal-framed table with a power cord and control panel (no text or symbols)

Symbol of a trash bin crossed with no visible text or labels

C/O YH Consulting Limited Kantoor 147, Centurion Huis, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELLNR: YJXXGZ-001; YJXXGZ-001-1; YJXXGZ-001-2

MODELLNR: YJXXGZ-001; YJXXGZ-001-1; YJXXGZ-001-2

Line drawing of a long rectangular metal shelf with a small attached power outlet (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

1×1	2×1	3×2	4×4
5×2	6×2	7×1	8×1
9×2
AM6×12mm ×4	BM6×28mm ×8	CM6×40mm ×12	D∅3.5×12mm ×2	E×2
FM4 ×1	GM4 ×1	HM6 ×5	I×2
J or or

Exploded view diagram of a modular shelving unit with numbered components for assembly or maintenance reference.

MONTERINGSSEG

Step 1

M6×40mm C × 6pcs M4 F × 1pc

Technical diagram showing labeled components of a mechanical assembly with numbered parts and directional arrows indicating motion.

C C C C F C C

C ⑥ ⑦ ⑥ C F

Step 2 M6×12mm A × 2pcs M6×40mm C × 4pcs M4 F × 1pc 3 8 3 C A A C F A A C F

Step 3 M6×12mm A × 2pcs M6×40mm C × 2pcs E × 2pcs M4 F × 1pc M4 G × 1pc M6 H × 5pcs H G E E A A F H 9 C E A 9 H H C

Step 4

M6×28mm

B × 8pcs

M4

F × 1pc

Step 5 Ø3.5×12mm D × 2pcs M4 G × 1pc J× 1pc G D D J

Step 6

1 × 2pcs Wall × 2

Step 7

Line drawing of a simple metal-framed table with a power outlet and cable (no text or symbols)

KOMPLETTERING

Line drawing of a simple metal-framed table with a power cord and control panel (no text or symbols)

Korrekt avfallshantering

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support