WF066I - Curling iron Vevor - Free user manual and instructions

Product Type	Hair Straightener
Brand	Vevor
Model	WF066I
Dimensions	355 x 123 x 65 mm
Weight	Approx. 0.5 kg
Rated Voltage	100-240 V AC
Rated Frequency	50-60 Hz
Rated Power	60 W
Temperature Range	140 °C - 230 °C (270 °F - 450 °F)
Heating Unit	MCH (ceramic)
Display	Digital LED
Ionic Technology	Built-in negative ion generator
Infrared Radiation	Yes
Auto Shut-off	After 60 minutes of inactivity
Power Cord	360° swivel, approx. 2.5 m length
Plate Material	Ceramic
Recommended Temperature by Hair Type	Fine/bleached: 150 °C; Colored: 180 °C; Normal: 200-210 °C; Thick/curly: 230 °C
Care and Cleaning	Unplug, let cool, wipe with a damp cloth. Do not use abrasive products.
Warranty	365 days
Manufacturer	Shenzhen Winfuture Technology Co., Ltd., made in China

Frequently Asked Questions - WF066I Vevor

How do I adjust the temperature on the WF066I straightener?

Press the + or - button to adjust the temperature. The range is 140 °C to 230 °C (270 °F - 450 °F). The LED display flashes during heating and stays steady once the temperature is reached.

What temperature should I choose for my hair?

For fine or bleached hair: 150 °C (310 °F). For colored hair: 180 °C (350 °F). For normal hair: 200-210 °C (390-410 °F). For thick or very curly hair: 230 °C (450 °F).

Does the straightener have an auto shut-off?

Yes, the straightener automatically turns off after 60 minutes of inactivity for safety. To turn it back on, simply press the power button.

Can I use the straightener on wet hair?

No, the straightener should only be used on dry, natural hair without flammable products. Using it on wet hair can damage both hair and the device.

How do I clean the WF066I straightener?

Unplug the device and let it cool completely. Wipe the surfaces with a damp cloth. Do not use harsh or abrasive cleaners.

What should I do if the straightener emits a burning smell?

During first use, a slight burning smell or very light smoke may appear due to residual oil burning off the MCH heating element. This is normal and disappears after a few seconds.

The power cord is damaged, what should I do?

If the cord or plug is damaged, stop using the device immediately. The cord must be replaced by the manufacturer or a qualified professional to avoid any danger.

How long does it take for the straightener to heat up?

Heating time is fast; the LED display flashes during temperature rise and stops once the desired temperature is reached. It takes about 30 to 60 seconds depending on the set temperature.

Can I use the straightener on synthetic hair?

No, this device is not suitable for synthetic hair. It is designed only for natural human hair.

Is the straightener suitable for professional salon use?

No, this device is intended for household use only. It is not designed for commercial or salon use.

USER MANUAL WF066I Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

HAIR STRAIGHTENER

MODEL: WF066I

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands and do not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us whether you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

HAIR

STRAIGHTENER

MODEL: WF066I

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

HAIR STRAIGHTENER USER MANUAL

Please read the instructions carefully before use and retain this manual in a place for future reference, and pass the manual onto any subsequent users.

About Ion Technology: The built-in ionic generator emits negative ions, negatively charged atoms and molecules that can interact with the molecular particles in hair. They seal the hair cuticle and reduce frizziness, split ends and knotting, increasing hair manageability, leaving hair silky and lustrous!

SAFETY WARNINGS:

- Read all of the instructions carefully before use.

- This appliance can be used by juniors aged from 15 years and above and persons lack of experience and knowledge if they have been given supervisory instruction concerning the safety use of the appliance and understand the hazard involved. Children shall not play with the appliance, Cleaning and user maintenance shall not be made by children unless they are older than 15 years supervised

- Keep away from water.

- Unplug the device immediately after use in order to reduce the risk of deal case of an electric shock.

- Do not put the appliance in a place where it can slide into a sink or a b do not keep the device in such a place.

- Do not use the appliance while you are taking a shower.

- Do not immerse or drop it into water or other liquids. If an appliance falls unplug immediately at the power outlet

- Never leave the hair straightener unattended in order to reduce the risk of electrical shock, fire or damage.

- Close observation is required when the appliance is in use to prevent usage, child or other persons whom it is not intended for. Do not let children to play

this hair straightener appliance.

- If the cable or plug of the hair straightener is damaged or not working prop dropped into water, stop using it.

- If the cable or plug of this appliance is damaged, it must be changed by t manufacturer or similarly qualified persons in order to avoid a hazard.

- In order to avoid a hazard due to inadvertent resetting of the thermal cut-out appliance must not be supplied through an external switching device, such as timer, or connected to a circuit that is regularly switched on and off by the user

-Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.

-Keep the electricity cable away from hot surfaces.

-Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.

-Do not place the heated unit directly on any surface while it is hot or plugged in.

-Do not use on people while they are sleeping.

-Do not use on pets.

-Do not use in open areas, or places where sprays are used or oxygen is administered.

-The hair straightener's heater can get extremely hot during use. Do not touch hot areas with exposed skin.

-Only use this appliance on dry, natural hair without any flammable hair products.

-This appliance is not suitable for artificial hair.

-This appliance is not intended for commercial or salon use.

POWER CORD SAFETY TIPS:

-Never pull or yank the cord of the appliance and do not use an extension cord with this appliance.

-Insert the plug by grasping it firmly and guide it into the outlet. -To disconnect the appliance, grasp the plug and remove it from the outlet. -Before each use, inspect the power cord for cuts and/or abrasion marks. If any are found, this indicates that the appliance should be serviced and the line cord replaced. -Never wrap the cord tightly around the appliance as this could place undue stress on the cord where it enters the appliance and cause it to fray and break. -DO NOT OPERATE THE APPLIANCE IF THE POWER CORD SHOWS ANY DAMAGE OR IF THE APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.

APPEARANCE AND INFORMATION: Infrared and ionic hair straightener

LED Display

Temperature adjustment/MCH heat ON/OFF button

360-degree rotatable power cord

Built-in heater

Infrared (WF066I)

Parameters WF066I (Infrared)

Product model	WF066I	imensions	355*123*65mm
ated voltage	100-240V AC	Operating temperature	140 °C-230°C or 270°F -450°F
Rated frequency	50-60 Hz	Operating indication	LED digital
Rated power	60W	Heating unit	MCH

OPERATION INSTRUCTIONS:

PLEASE USE IT ON DRY HAIR ONLY

Step 1: Insert the power plug into a wall socket. Press the power button; the LED will turn on and the heater begins to warm up. Press the +/- button to adjust the temperature according to your hair type.

Step 2: Press the +/- button to choose different temperature settings according to different hair types. The available temperature settings are:

WF045C: 210°F - 450°F (100°C - 230°C).

WF066I: 270°F - 450°F (140°C - 230°C).

Step 3: When the brush is heating up, the temperature setting LED light will flash until the set temperature is reached. Once the temperature setting LED light stays on, the brush is ready for hair straightening. Please hold the handle and keep a safe distance from exposed skin and eyes.

Step 4: For straightening curly hair or other hard-to-straighten hair, set the temperature to 230°C (450°F). For tinted, permed, or fine blond hair, set the temperature to 150°C - 180°C (310°F - 350°F). For other ordinary hair, set the temperature to 180°C - 200°C (350°F - 390°F).

Step 5: Hold certain parts of your hair with clips (thickness less than 100mm) on the top, middle, back, front, and sides in order to make the styling operation easier.

Step 6: First straighten the lower layers of your hair and then pass to upper. Take a small part of your hair, disperse it in the middle of the brush and the tight. Hold the hair straightener in one of your hands and comb your hair from the root to the tips in 15 seconds without stopping. Do not hold the hair straightener in one place for more than 10 seconds. Make sure that you are holding the hair straightener by its handle. Repeat this operation until your hair is straightened as desired.

Step 7: Once the hair straightening is complete, long press the power button to power off the hair straightener. Then unplug it and let it cool down before storing. Note: Please do not comb your hair before it has cooled down, otherwise the hairstyle may be affected.

AUTO-OFF SAFETY FUNCTION:

The hair straightener has an auto-off safety feature and will turn off after 60 minutes of use. If you want to use it again, simply press the power button to turn it on again.

TEMPERATURE SETTING:

The default operating temperature setting is 410°F (210°C). You can short press the temperature adjustment button to adjust the operating temperature. During heating, the LED temperature display will flash. It will stop flashing and stay on when the set temperature is reached.

Setting 1: 150°C (310°F), suitable for first time users or users with thin, fine hair or bleached hair. Setting 2: 180°C (350°F), suitable for dyed or dark color hair. Settings 3 & 4: 200°C (390°F) to 210°C (410°F), suitable for normal or slightly curled hair. Setting 5: 230°C (450°F), suitable for thick and very curly hair, or difficult to style hair.

ATTENTION:

Your hair straightener has an automatic turning off feature for your security. The hair straightener turns off after a usage of 60 minutes. If you want to use it again, you can press the power button to turn on the appliance.

First time usage of this appliance may occasionally cause a slight burning smell or very light smoke, which is caused by the small amount of residual oil on the heater burning off when heated. This is normal and safe to use and should last a few seconds.

It is important to set the appropriate working temperature for your hair before usage in order to prevent your hair from getting damaged.

When the MCH heater is on, the appliance can get extremely hot. Make sure to keep it away from eyes, nose, hands, neck, and facial areas.

MAINTENANCE AND CLEANING:

Unplug the appliance and allow it to cool.

Wipe the surfaces with a damp cloth to clean.

Do not use harsh or abrasive cleaning agents or solvents.

Store the appliance in a cool, dry place.

SERVICE AND GUARANTEE:

Defects affecting product functionality appearing within the guarantee period will be corrected by replacement or repair at our option provided

Defects from repair by an unauthorized dealer are not covered.

Consumables are excluded; your statutory rights are not affected.

Warranty date: 365 days

ENVIRONMENTAL PROTECTION:

To avoid environmental and health problems due to hazardous substances in electrical and electronic goods, appliances marked with this symbol must not be disposed of with unsorted municipal waste, but recovered, reused or recycled.

FCC Information:

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment!

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This product may cause harmful interference. 2) This product must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the product.

Note: This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This product generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the distance between the product and the receiver.
• Connect the product to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

CORRECT DISPOSAL

This product is subject to the provisions of European Directive 2012/19/EU. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

SHENZHEN WINFUTURE TECHNOLOGY CO., LTD.

Address: 6F, Huahao High-tech Industrial Park, No. 59, Gangzai Street, Xinqiao, Shajing Street, Baoan District, 518125 Shenzhen, Guangdong, P.R. China.

Manufacturer: Shanghai Muxin Muye Youxiangongsi

Address: Baoshan District, Shuangcheng Road 803, Lane 11, No. 1602A-1609, Shanghai

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD

NSW 2122 Australia

UK

REP

Pooledas Group Ltd

Unit 5 Albert Edward House,

The Pavilions Preston, United Kingdom

[e-mail]

01772418127

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021, 76351

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

FCC Information:

Address: 6F, Huahao High-tech Industrial Park No. 59, Gangzai Street, Xinqiao, Shajing Street, Baoan District, 518125 Shenzhen, Guangdong, PR China.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported in Australia: SIHAO

PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Pooledas Group Ltd Unit

5 Albert Edward House, The Pavilions

Parameter WF066I (Infrared)

FCC Information:

Address: 6F, Huahao High-tech Industrial Park No. 59, Gangzai Street, Xinqiao, Shajing Street, Baoan District, 518125 Shenzhen, Guangdong, PR China.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

UK REP

Pooledas Group Ltd Unit

5 Albert Edward House, The Pavilions

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Parameter WF066I (Infrared)

Address: 6F, Huahao High-tech Industrial Park No. 59, Gangzai Street, Xinqiao, Shajing Street, Baoan District, 518125 Shenzhen, Guangdong, PR China.

5 Albert Edward House, The

Pavilions Preston, United Kingdom

[e-mail]

01772418127

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

FCC Information:

Address: 6F, Huahao High-tech Industrial Park No. 59, Gangzai Street, Xinqiao, Shajing Street Baoan District, 518125 Shenzhen Guangdong PR China.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Baoshanqu

Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Import to Australia: SIHAO PTY LTD.1 ROKEVA STREETEASTWOOD NSW 2122 Australia

REP WIELKIEJ BRYTANII

Pooledas Group Ltd Unit

5 Albert Edward House, The Pavilions

NEED HELP? CONTACT US!

SAFETY WARNINGS:

DISCONNECT IF THE DEVICE WORKS INTERMITTENTLY OR STOPS

WORK WITH ENGINEERS.

EXTERIOR AND INFORMATION: Infrared and anion hair straightener

LED screen

Parameters WF066I (Infrared)

Productmodel	WF066I	afmetingen	355*123*65mm
nominale spanning	100-240 V AC	Bediening temperatuur	140 y -230 y of 270 y -450 y
Becoordeeld frequentie	50-60Hz	Bediening indicatie	LED digitaal
Nominaal vermogen	60W	Verwarmingseenheid	MCH

INSTRUCTIONS FOR USE:

USE ONLY ON DRY HAIR

FCC information:

Address: 6F, Huahao High-tech Industrial Park No. 59, Gangzai Street, Xinqiao, Shajing Street, Baoan District, 518125 Shenzhen, Guangdong, PR China.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Baoshan District

Shuangcheng Road 803, Lane 11, No. 1602A-1609, Shanghai. Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

VK

REP

Pooledas Group Ltd Unit

5 Albert Edward House, The

Warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Parameters WF066I (Infrared)

Produktmodell	WF066I	dimensioner	355*123*65mm
matad spänning	100-240V AC	Drift temperatur	140 y -230 y eller 270 y -450 y
Betygsattfrekvens	50-60 Hz	Drift indikation	LED digital
Märkeffekt	60W	Värmeenhet	MCH

OPERATING INSTRUCTIONS:

SERVICE AND WARRANTY:

Address: 6F, Huahao High-tech Industrial Park No. 59, Gangzai Street, Xinqiao, Shajing Street Baoan District, 518125 Shenzhen Guangdong PR China.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD.1 ROKEVA STREETEASTWOOD NSW 2122 Australia

UK

REP

Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, UK [e-mail] 01772418127

EC

REP

SHUNSHUN GmbH Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Germany [e-mail] [phone]

Made in China

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support