WD355-8 - Wood lathe Vevor - Free user manual and instructions

Find the device manual for free WD355-8 Vevor in PDF.

Vevor WD355-8 - Wood lathe
📄 39 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Vevor WD355-8 - page 1
1 / 39
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Wood lathe
Brand Vevor
Model WD355-8
Motor power 550 W
Rotational speed 600 - 3800 RPM (variable)
Distance between centers 355 mm
Maximum turning diameter 200 mm
Net weight 25 kg
Supply voltage 230 V / 50 Hz
Bed material Cast iron
Main functions Wood turning, sanding, axial drilling
Maintenance and cleaning Clean after each use, lubricate slides and spindle thread
Safety Eye protection recommended, emergency stop, transparent protective cover
Spare parts and repairability Belt, chuck, tailstock, set of chisels available
Included accessories Set of 8 wood chisels, jaw chuck, tailstock
Warranty 1 year
Certifications CE

Frequently Asked Questions - WD355-8 Vevor

How to change the rotation speed?
The speed is adjusted by moving the belt on the pulleys. Refer to the diagram in the manual for position correspondence.
What types of wood can I turn?
This lathe accepts all soft and hard woods, up to a diameter of 200 mm. Avoid overly resinous woods without suction.
How to install the chuck?
Screw the chuck onto the spindle thread (M33 x 3.5). Tighten firmly with the provided key.
The lathe makes an abnormal noise, what should I do?
Check the tightening of the fixing screws, alignment of centers, and belt tension. If the noise persists, contact customer service.
How to sharpen the provided chisels?
The chisels are pre-sharpened. To resharpen them, use a fine oil stone or a bench grinder with support.
Can I use chisels from other brands?
Yes, any turning tool compatible with an 8 mm round shank can be used.
What is the recommended speed for beginners?
Start at low speed (600-1000 RPM) for large diameter pieces. Increase gradually.
How to clean the lathe after use?
Dust with a soft brush, wipe the slides with an oily cloth. Do not use water.
Is the lathe covered by a warranty?
Yes, the manufacturer's warranty is 1 year from the date of purchase. Keep your invoice.
Where to find spare parts?
Spare parts (belt, chuck, tailstock) are available on the Vevor website or from customer service.

User questions about WD355-8 Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Wood lathe in PDF format for free! Find your manual WD355-8 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WD355-8 by Vevor.

USER MANUAL WD355-8 Vevor

TURNING TOOLS USER MANUAL

MODEL: WD355-8

Technical Support and E-Warranty Certificate

www.vevor.com/support

MODEL: WD355-81/4" gouge, 1/2" gouge, 3/4" gouge, 1/2" round nose, 1/2" spear point, 1" skew, 1/2" skew, 1/8" parting tool

8PC WOOD LATHE CHISEL SET TURNING TOOLS

(The picture is for reference only, please refer to the actual object)

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

Vevor WD355-8 - TURNING TOOLS USER MANUAL - 2Warning-To reduce the risk of injury, user must read instructi manual carefully.
Vevor WD355-8 - TURNING TOOLS USER MANUAL - 3This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed throu indicates that the product requires separate refuse collection i European Union. This applies to the product and all accesso marked with this symbol. Products marked as such may not discarded with normal domestic waste, but must be taken to collection point for recycling electrical and electronic devices

INSTRUCTIONS

Thank you very much for choosing this turning tools. Please read all instructions before using it. The information will help you achieve the best possible results.

Technical line drawing of a mechanical device with multiple tool holders and a shaft, no text or symbols present.

Five different types of wooden furniture and vases displayed side by side, including cups, gourds, a vase with dried flowers, and a stool (no text or symbols visible).

- Professional Application - This 8 pcs wood lathe chisel set is designed for turners in cutting and woodworking projects as well as hobbyists and handy men. This portable set is suitable for carving intricate details into wood pieces or chiseling runners for your furniture pieces.

  • What's included: 2-Skew: 1", 1/2", 1-Spear Point: 1/2", 1-Parting Tool: 1/8", 1-Round Nose: 1/2", 3-Gouge: 1/4", 1/2", 3/4"
  • Detailed Design - Light, very sharp, and responsive, the tools are already sharpened and can be used immediately when you get them, no need further sharpening; durable metal ferrules tighten the handle for a stable use experience, ensuring chisels' safety and reliability while working.
  • Premium Material - Made from high-quality triple tempered chromium-vanadium steel and hardened to last long, allowing you to have smooth and sharp carving experience; ground tips for precision turning.
  • Sturdy Handle - Shaped to minimize operator fatigue, high quality hardwood handles make it comfortable and convenient for you to use the chisel.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Affordable. Reliable. Home Improvement.

WOOD TURNING TOOLS USER MANUAL

MODEL: WD355-8

8PC WOOD LATHE CHISEL SET TURNING TOOLS

Five different types of wooden vessels and objects: gourd, vase with floral, cylindrical, and stool (no text or symbols visible).

Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Affordable. Reliable. Home Improvement.

TURNING TOOLS USER MANUAL

MODEL: WD355-8

www.vevor.com/support

MODEL: WD355-81/4" gouge, 1/2" gouge, 3/4" gouge, 1/2" round nose, 1/2" spear point, 1" skew, 1/2" skew, 1/8" parting tool

8PC WOOD LATHE CHISEL SET TURNING TOOLS

Five-panel image showing wooden vases and a ceramic vase, arranged in a row (no text or symbols visible).

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Affordable. Reliable. Home Improvement.

WOOD TURNING TOOLS USER MANUAL

MODEL: WD355-8

8PC WOOD LATHE CHISEL SET TURNING TOOLS

Five different types of wooden vessels and objects: gourds, vases, cylindrical, and a stool (no text or symbols visible).

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Affordable. Reliable. Home Improvement.

8PC WOOD LATHE CHISEL SET TURNING TOOLS

Five different types of wooden vases and a small cylindrical object, displayed in a studio setting (no text or symbols visible).

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Affordable. Reliable. Home Improvement.

WOOD TURNING TOOLS INSTRUCTION MANUAL

MODEL: WD355-8

www.vevor.com/support

MODEL: WD355-81/4" gouge, 1/2" gouge, 3/4" gouge, 1/2" round nose, 1/2" spear point, 1" skew, 1/2" skew, 1/8" parting tool

8PC WOOD LATHE CHISEL SET TURNING TOOLS

Five-panel image showing wooden vases and a ceramic vase, arranged in a row (no text or symbols visible)

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Affordable. Reliable. Home Improvement.

TURNING TOOLS USER MANUAL

MODEL: WD355-8

Technical support and e-warranty certificate www.vevor.com/support

MODEL: WD355-81/4" gouge, 1/2" gouge, 3/4" gouge, 1/2" round nose, 1/2" spear point, 1" skew, 1/2" skew, 1/8" parting tool

8PC WOOD LATHE CHISEL SET TURNING TOOLS

Five-panel image showing wooden vases and a ceramic vase, arranged in a row (no text or symbols visible)

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Affordable. Reliable. Home Improvement.

TURNING TOOLS USER MANUAL

MODEL: WD355-8

www.vevor.com/support

MODEL: WD355-8

1/4" gouge, 1/2" gouge, 3/4" gouge, 1/2" round nose, 1/2" spear point, 1" skew, 1/2" skew, 1/8" parting tool

8PC WOOD LATHE CHISEL SET TURNING TOOLS

Five different types of wooden furniture and vases displayed side by side, including cups, gourds, a vase with dried flowers, and a stool (no text or symbols visible)

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : WD355-8

Category : Wood lathe