WD500-4 - Wood lathe Vevor - Free user manual and instructions

Product type	Wood lathe for hobby and crafts
Brand	Vevor
Model	WD500-4
Distance between centers	500 mm
Maximum turning diameter over bed	300 mm
Variable speed	Yes, 500-3500 rpm (estimate)
Motor	Electric, 750 W (estimate)
Power supply	230 V / 50 Hz (Europe estimate)
Weight	Approximately 50 kg
Chassis material	Cast iron
Included	Set of 4 carbide turning tools, chuck, tailstock
Main functions	Wood turning: roughing, finishing, detailing; making grooves, curves, and carvings
Maintenance and cleaning	Regularly clean chips; lubricate moving parts; sharpen or replace carbide blades if necessary
Safety instructions	Wear safety glasses; do not wear loose clothing; use a face shield; unplug before any adjustment
Spare parts and repairability	Replacement blades available; other parts via Vevor after-sales service
Warranty	Manufacturer's warranty (contact www.vevor.com/support)
Certifications	European Directive 2012/19/EU (WEEE)
Country of origin	China

Frequently Asked Questions - WD500-4 Vevor

How do I install my Vevor WD500-4 wood lathe?

Assemble the lathe on a stable, level support. Secure the cast iron bed and check the alignment of the headstock and tailstock. Plug in the power after verifying that the voltage matches (230V).

What tools are included with the lathe?

The lathe comes with a set of 4 carbide turning tools: a roughing tool, a finishing tool, a detailing tool, and a forming tool. Each tool has a beech handle and a replaceable carbide tip.

How do I adjust the speed?

Use the speed variator on the control panel. Turn the dial to select the desired speed between 500 and 3500 rpm. Refer to the wood type and workpiece diameter to choose the optimal speed.

How do I change a carbide blade?

Unscrew the fixing screw on the side of the tool. Remove the used blade and insert a new blade. Tighten the screw firmly. Ensure the blade is properly aligned before use.

What safety precautions should I take?

Always wear safety glasses and a dust mask. Avoid loose clothing, remove jewelry, and tie back long hair. Use a face shield and stop the lathe before any adjustment. Keep children and pets away.

How do I maintain my wood lathe?

Clean chips after each use. Lightly oil the ways and the tailstock mechanism. Regularly check the tightness of screws and the condition of belts. Replace blades as soon as they become dull.

Can I use non-Vevor tools with this lathe?

Yes, the lathe accepts standard wood turning tools with a 12 mm shank. Ensure the tools are well sharpened and suitable for your project.

What if the lathe does not start?

Check that the power cord is plugged in and the switch is on. Check the fuse or circuit breaker. If the problem persists, contact Vevor support (after-sales service).

How do I get spare parts?

Replacement blades are available on the Vevor website or from authorized dealers. For other parts (belt, chuck, etc.), contact Vevor customer service via www.vevor.com/support.

What types of wood can I turn with this lathe?

You can work with all hardwoods and softwoods (oak, beech, walnut, pine, etc.). Avoid wood that is too dry or cracked. For softwoods, use higher speeds and well-sharpened tools.

USER MANUAL WD500-4 Vevor

Affordable. Reliable. Home Improvement.

TURNING TOOLS USER MANUAL

MODEL: WD500-4

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODEL:WD500-4

Box containing four wooden tools with metal fittings, one being cut with a red tool (no visible text or symbols)

(The picture is for reference only, please refer to the actual obje

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

Warning-To reduce the risk of injury, user must read instructi manual carefully.

This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed throu indicates that the product requires separate refuse collection i European Union. This applies to the product and all accesso marked with this symbol. Products marked as such may not discarded with normal domestic waste, but must be taken to collection point for recycling electrical and electronic devices

INSTRUCTIONS

Thank you very much for choosing this turning tools. Please read all instructions before using it. The information will help you achieve the b possible results.

Wood Turning Tools for Lathe 4 PCS Set, Carbide Lathe Tools with Diamond Shape, Round, Square Cutters, Turning Lathe Chisels with Comfortable Grip Handles Lathe Tools for Craft DIY Hobbyists

Close-up of hands using a lathe tool to work on a wooden surface, no visible text or symbols

Features & Details

• [TOUGH & DURABLE] - The lathe tools include a rougher, a finishers, a detail, which make quick work of anything on your lathe. Each one them is made up of a quality alloy shaft, a beech handle and a sha carbide tip, featuring long service life.
• [SHARP & ACCURATE] - The wood lathe tools set will provide smoo and clean cuts with 3 types of cutters together which are designed f different grinding effects. Importantly, it saves you a bunch of time or grinding and honing, because you can easily replace these blades wh they get dull.
• [ERGONOMIC DESIGN] - The wood lathe turning tools are designed to handle of a curved shape that fits your hand well, and relieves the during a long time working.
• [EASE OF USE] - The woodturning tools set ensures a good entry-le setup and use. It is made exactly for you, a beginner lacking confide a craft hobbyist in need of an alternative option to complement your
• [WIDE APPLICATION] - The delicate wood chisels for lathe can cut v-grooves, do curves and coves, and carve lines.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

Affordable. Reliable. Home Improvement.

OUTILS DE TOURNAGE MANUEL D'UTILISATION

MODÈLE: WD500-4

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODÈLE : WD500-4

Box containing four wooden tools with metal fittings, one being cut with a red tool (no visible text or symbols)

Close-up of hands using a lathe machine to work with fine wood, no visible text or symbols

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

Affordable. Reliable. Home Improvement.

DREHWERKZEUGE BENUTZERHANDBUCH

MODELL: WD500-4

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODELL:WD500-4

Box containing four wooden tools with metal fittings, one being cut with a red tool (no visible text or symbols)

Close-up of hands using a lathe tool in a machining process, showing fine material and tool path (no text or symbols visible)

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

Affordable. Reliable. Home Improvement.

UTENSILI DI TORNITURA MANUALE D'USO

MODELLO: WD500-4

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODELLO: WD500-4

Box containing four wooden tools with metal fittings, one being cut with a red tool (no visible text or symbols)

Close-up of hands using a lathe machine to work with fine material, no visible text or symbols

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

Affordable. Reliable. Home Improvement.

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODELO: WD500-4

Box containing four wooden tools with metal fittings, one being cut with a red tool (no visible text or symbols)

Close-up of hands using a lathe tool to work on a wooden cutting board (no visible text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

Affordable. Reliable. Home Improvement.

NARZĘDZIA TOKARSKIE INSTRUKCJA OBSŁUGI

MODEL: WD500-4

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODEL:WD500-4

Box containing four wooden tools with metal fittings, one being cut with a red tool (no visible text or symbols)

Close-up of hands using a lathe tool to cut a wooden part, no visible text or symbols

Funkcje i szczegóły

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

Affordable. Reliable. Home Improvement.

DRAAIGEREEDSCHAPPEN GEBRUIKERSHANDLEIDING

MODEL: WD500-4

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODEL: WD500-4

Box containing four wooden tools with metal fittings, one being cut with a red tool (no visible text or symbols)

Close-up of hands using a lathe tool in a machining process, showing fine material and tool path (no text or symbols visible)

Kenmerken en details

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

Affordable. Reliable. Home Improvement.

SVARVVERKTYG ANVÄNDARMANUAL

MODELL: WD500-4

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODELL: WD500-4

Box containing four wooden tools with metal fittings, one being cut with a red tool (no visible text or symbols)

Close-up of hands using a lathe tool to cut wood or wood shavings in a machine (no visible text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP