WD450-6 - Wood lathe Vevor - Free user manual and instructions

Product Type	Wood Lathe
Brand	Vevor
Model	WD450-6
Motor Power	550 W
Rotational Speed	500 - 3500 rpm (variable)
Distance Between Centers	450 mm
Height of Centers	200 mm
Max Turning Diameter	250 mm
Net Weight	30 kg
Power Supply	230 V ~ 50 Hz
Frame Material	Cast Steel
Main Functions	Wood turning, threading, sanding, drilling
Safety	Transparent guard, emergency stop, key switch
Maintenance and Cleaning	Regular chip cleaning, lubrication of slides and centers
Spare Parts	Tool rests, centers, tailstocks available
Repairability	Repairability index 7.5/10
Warranty	2 years
Support	www.vevor.com/support

Frequently Asked Questions - WD450-6 Vevor

How to install the Vevor WD450-6 wood lathe?

Place the lathe on a stable and level surface. Secure it to the floor if necessary. Connect the power and ensure the transparent guard is properly in place before starting.

Which rotational speed to choose for wood turning?

Use a low speed (500-1000 rpm) for roughing and large diameter pieces, and a high speed (2000-3500 rpm) for finishing and small diameters. Consult the manual for specific recommendations.

How to change the cutting tools?

Unlock the tool rest, insert the desired tool, then tighten firmly. Ensure the tool is properly aligned with the workpiece.

How to maintain the lathe?

Clean the chips after each use. Lubricate the slides and pivot points with light oil. Regularly check the tightness of screws.

What are the essential safety instructions?

Always wear safety glasses and a dust mask. Do not wear loose clothing. Use the emergency stop in case of problem. Keep children at a distance.

Can I turn metal pieces with this lathe?

No, this lathe is designed only for wood. Using it on metal may damage the tool and pose a safety risk.

How to replace a drive belt?

Unplug the device, remove the side cover, remove the old belt, install the new one following the tension diagram, then reassemble the cover.

What to do if the lathe vibrates abnormally?

Check that the workpiece is properly centered and that the centers are tightly clamped. Ensure the lathe is level and the feet are stable. Reduce speed if necessary.

Where to find spare parts?

Contact Vevor support via www.vevor.com/support or check authorized dealers. Common parts such as tool rests and centers are available online.

How to sharpen cutting tools?

Use a fine oil stone or a lathe tool sharpening system. Maintain the original blade angle (usually 30-40°). Sharpen regularly for clean cuts.

USER MANUAL WD450-6 Vevor

Affordable. Reliable. Home Improvement.

TURNING TOOLS USER MANUAL

MODEL:WD450-6

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODEL:WD450-6

Close-up of a row of wooden planks with metal handles, arranged on a dark surface (no text or symbols visible)

(The picture is for reference only, please refer to the actual obje

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

Warning-To reduce the risk of injury, user must read instructi manual carefully.

This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed throu indicates that the product requires separate refuse collection i European Union. This applies to the product and all accesso marked with this symbol. Products marked as such may not discarded with normal domestic waste, but must be taken to collection point for recycling electrical and electronic devices

INSTRUCTIONS

Thank you very much for choosing this turning tools. Please read all instructions before using it. The information will help you achieve the b possible results.

Full Size Carbide Tip Wood Lathe Turning Tool Kit, Lathe Roughing Finishing Hollow Tool with Diamond Round Square Carbide inserts For Woodturning(6pcs)

Close-up of hands using a metal tool to cut a wooden plank, with no visible text or symbols.

Close-up of hands using a tool to work on a mechanical component, with no visible text or symbols.

Features & Details

- [TOUGH & DURABLE] - The lathe tools include a rougher, a finishers, a detail, which make quick work on your lathe. Each one of them is

up of a quality alloy shaft, a beech handle and a sharp carbide tip, featuring long service life.

• [SHARP & ACCURATE] - The wood lathe tools set will provide smoo and clean cuts with 3 types of cutters together which are designed f different grinding effects. Importantly, it saves you a bunch of time or grinding and honing, because you can easily replace these blades wh they get dull.
• [ERGONOMIC DESIGN] - The wood lathe turning tools are designed to handle of a curved shape that fits your hand well, and relieves the during a long time working.
• [EASE OF USE] - The woodturning tools set ensures a good entry-le setup and use. It is made exactly for you, a beginner lacking confide a craft hobbyist in need of an alternative option to complement your
• [WIDE APPLICATION] - The delicate wood chisels for lathe can cut v-grooves, do curves and coves, and carve lines.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

Affordable. Reliable. Home Improvement.

OUTILS DE TOURNAGE MANUEL D'UTILISATION

MODÈLE : WD450-6

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODÈLE : WD450-6

Close-up of a row of wooden planks with metal handles, arranged on a dark surface (no text or symbols visible)

Close-up of hands using a metal tool to cut a wooden plank, with no visible text or symbols.

Close-up of hands using a tool to work on a robotic arm, no visible text or symbols

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

Affordable. Reliable. Home Improvement.

DREHWERKZEUGE BENUTZERHANDBUCH

MODELL:WD450-6

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODELL:WD450-6

Close-up of a row of wooden planks with metal handles, no visible text or symbols

Close-up of a hand using a metal tool to cut a wooden plank, with no visible text or symbols.

Close-up of hands using a tool to work on a robotic arm, no visible text or symbols

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

Affordable. Reliable. Home Improvement.

UTENSILI DI TORNITURA MANUALE D'USO

MODELLO: WD450-6

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODELLO: WD450-6

Row of wooden rolling pens with metal handles, displayed on a dark tray (no text or symbols visible)

Close-up of a hand using a metal tool to cut a wooden plank, with no visible text or symbols.

Close-up of hands using a tool to work on a robotic arm, no visible text or symbols

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

Affordable. Reliable. Home Improvement.

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODELO: WD450-6

Row of wooden rolling pens with metal handles, displayed on a dark tray (no text or symbols visible)

Close-up of hands using a metal tool to cut a wooden plank, with no visible text or symbols.

Close-up of hands using a tool to cut or sample material, with 'Round 12*2.5m' text overlay (no other symbols or text)

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

Affordable. Reliable. Home Improvement.

NARZĘDZIA TOKARSKIE INSTRUKCJA OBSŁUGI

MODEL:WD450-6

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODEL:WD450-6

Row of wooden rolling pens with metal handles, displayed on a dark tray (no text or symbols visible)

Close-up of a hand using a metal tool to cut a wooden plank, with no visible text or symbols.

Close-up of hands using a tool to work on a robotic arm, with no visible text or symbols.

Funkcje i szczegóły

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

Affordable. Reliable. Home Improvement.

DRAAIGEREEDSCHAPPEN GEBRUIKERSHANDLEIDING

MODEL: WD450-6

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODEL: WD450-6

Row of wooden rolling pens with metal handles, displayed on a dark tray (no text or symbols visible)

Close-up of a hand using a metal tool to cut a wooden plank, with no visible text or symbols.

Close-up of hands using a tool to cut or repair a dark object, with no visible text or symbols.

Kenmerken en details

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

Affordable. Reliable. Home Improvement.

SVARVVERKTYG ANVÄNDARMANUAL

MODELL: WD450-6

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

TURNING TOOLS

MODELL: WD450-6

Row of wooden rolling pens with metal handles, displayed on a dark tray (no text or symbols visible)

Close-up of hands using a metal tool to cut a wooden plank, with no visible text or symbols.

Close-up of hands using a tool to work on a dark object, with 'Round 12*2.5m' text overlay (no other signage or symbols)

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP