TL-A5122 - Pump Vevor - Free user manual and instructions
Find the device manual for free TL-A5122 Vevor in PDF.
User questions about TL-A5122 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Pump in PDF format for free! Find your manual TL-A5122 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TL-A5122 by Vevor.
USER MANUAL TL-A5122 Vevor
TechnicalSupportandE-WarrantyCertificate
www.vevor.com/support
AIR HYDRAULIC PUMP USER MANUAL
MODEL: TL-A5122
Wecontinuetobecommittedtoprovideyoutoolswithcompetitiveprice. "SaveHalf", "HalfPrice"oranyothersimilarexpressionsusedbyusonly representsanestimateofsavingsyoumightbenefitfrombuyingcertaintools withuscomparedtothemajortopbrandsanddoesnotnecessarilymeantocover allcategoriesoftoolsofferedbyus.Youarekindlyremindedtoverifycarefull whenyouareplacinganorderwithusifyouareactuallySaving Halfincomparisonwiththetopmajorbrands.
y
MODEL: TL-A5122
natural_image
Black and silver electric shock absorber device with metallic casing and ventilation slots (no text or symbols visible)(Thepictureisforreferenceonly, pleaserefertotheactualobject)
NEED HELP? CONTACT US!
Haveproductquestions?Needtechnicalsupport?Pleasefeelfreeto contactus:
Technical Support and E-Warranty Certificate www.vevor.com/support
Thisistheoriginalinstruction, pleasereadallmanualinstructions carefullybeforeoperating.VEVORreservesaclearinterpretationofour usermanual.Theappearanceoftheproductshallbesubjecttothe productyoureceived.Pleaseforgiveusthatwewon'tinformyouagainif thereareanytechnologyorsoftwareupdatesonourproduct.
Warning-Toreducetheriskofinjury, usermustreadinstructions manualcarefully.
Repair Parts Sheets for hydraulic air hydraulic pumps are available from your nearest authorized EAGLE PRO Service Center or EAGLE PRO Sales office.
natural_image
Black and silver electric shock absorber device with metallic housing (no visible text or symbols)NOTE
PLEASE READ AND FOLLOW THIS INSTRUCTION BEFORE YOU USE EAGLE PRO AIR HYDRAULIC PUMPS.
Carefully inspect all components for shipping damage. If shipping damage is found, notify carrier at once. The carrier is responsible for any damage resulting from shipment.
1. SAFETY
To avoid personal injury or property damage, please follow all safety precautions. EAGLE PRO cannot be responsible for injury or damage resulting from unsafe and incorrect products use or system operation, or lack of maintenance.
DANGER is used when your action or lack of action may cause serious injury or even death. WARNING indicates a potential danger that requires correct action to avoid personal injury. IMPORTANT indicates correct action to prevent damage or equipment failure.
DANGER
The hydraulic equipment operator must be a qualified operator with correct training and work experience with hydraulic equipment. Lack of knowledge in any of these areas can lead to equipment damage or personal injury.
To avoid personal injury, please do not modify or weld hydraulic equipment without approval of EAGLE PRO.
✗ Never lift a more than the rated capacity of the cylinder, overloading causes equipment failure and serious personal injury.
✗ The cylinder is a load lifting device, not a load holding device. After the load has been raised or lowered, it must always be held mechanically, never work under a load supported by a hydraulic unit.
Keep hands and feet away from cylinder and workplace during operation to avoid personal injury.
Do not put unbalanced or off-center loads on cylinders. The incorrect load can result in equipment failure and serious personal injury.
WARNING
※ Wear safety glasses, helmet and other necessary personal protective equipment when operating hydraulic equipment.
Cylinder used to lift load must have solid footing for correct support. Please select steel or wood blocks that are capable of supporting the load.
Install Pressure gauges in the system to monitor the operating pressure. The gauge must have the same pressure rating as the pump and cylinder. The wrong gauges may result in personal injury.
The system operating pressure must lower than the lowest rated pressure in the system.
Carefully inspect the cylinder and couplers before use cylinder. Never connect a cylinder with damaged couplers or damaged port threads. The damaged coupler or damaged port threads may cause equipment failure and possible personal injury.
Install coupler in a clean environment; prevent dirt or other debris from entering into cylinder body or tube. Dirt or other debris will damage the cylinder and result in equipment failure and possible personal injury.
Before removing or tightening hose or coupler, release hydraulic pressure in system.
✗ Never handle pressurized hoses; escaping oil under high pressure can penetrate the skin, causing serious injury. Seek medical aid immediately if injured.
Use EAGLE PRO or other approved hydraulic oil
For hydraulic technical help or repair service. Please contact the authorized EAGLE PRO Service Center in your area. EAGLE PRO has no obligations under any warranty with respect to products that have been repaired by unauthorized personnel, modified, or damaged through misuse, abuse, accident, neglect, or mishandling.
IMPORTANT
Keep the air hydraulic pump clean at all time.
When the Air hydraulic pump is not in use, release the valve, remove hose and use rubber cap to recover the port.
Do not drop objects on hose.
Do not lift or carry hydraulic equipment by the hoses or couplers, use the handle or other means.
Use hydraulic equipment in normal operating temperatures. Do not use equipment in temperatures of 65 °C (150°F) or higher. Overheating will soften seals and weakens hose material, resulting in oil leaking or other equipment failure.
2. DESCRIPTION
Air Hydraulic Pump supplies hydraulic fluid pressure to selected tools. It consists of an in-line air and hydraulic cylinder.
SPECIFICATIONS
| Model | Pressure Rating (psi) | Useable Oil Capacity (cu.in) | Input Air pressure (psi) | Input Port Threads (NPT) | Output port Threads (NPT) | Oil Delivery (cu.in / min) | Operational Manner | Weight Ibs | |
| No load | load | ||||||||
| TL-A5122 | 10,000 | 30.5 | 90-145 | 1/4 -18 | 3/8 -18 | 49.5 | 7.6 | Foot Pedal | 13.2 |
3. BEFORE USE
Note: Always secure threaded port connections with non-hardening pipe thread compound. Tighten securely to prevent accidental removal of components while in use. Take care not to introduce thread compound into port openings.
Familiarize yourself with the specifications and illustrations in this operator 扭 manual. Know your pump, its limitations and how it operates before attempting to use. Refer to Specification chart on above for details of oil port thread size, usable oil capacity, and other information.
4. OPERATION
Operation of the pump as follow:
Connect the hose of the Air Hydraulic pump to the hydraulic coupling on the selected tool.
Connect the air supply line to the Air Hydraulic pump. Air supply should be 5-10 CFM at 100 PSI to obtain proper operating characteristic. The air line should be equipped with an air line filter.
※ To Advance, hold or Retract
Foot Pedal operates pumps:
a. Depress the Pump end of pedal will pump hydraulic oil to the system.
b. Stop depressing the Pump or Release end will stop and hold the pressure.
c. Depress the Release end of pedal will release the pressure in the system.
text_image
PUMP Air input port RELEASE Hydraulic Oil output port5. MAINTENANCE
5.1 Inspect the connections
Inspect hoses and connections, tighten connections as needed. Use non-hardening pipe thread compound when servicing connections.
5.2 Adding Hydraulic Fluid
✗ Depressurize and disconnect hydraulic hose from application.
✗ Remove the oil filler plug located on the side of the reservoir.
Use a small funnel to fill reservoir.
Wipe up any spilled fluid and reinstall the oil filler plug.
natural_image
Close-up of a mechanical component with a white flange and bolted end, no visible text or symbolsNote: Use only EAGLE PRO or other approved hydraulic oil. Never use brake fluid, transmission fluid, turbine oil, motor oil, alcohol, glycerin etc. Use of other than good quality hydraulic oil will void warranty and damage the pump, hose and application.
5.3 Changing Hydraulic Fluid
For best results, change fluid once a year.
※ Repeat step 5.2 above, and then pour used fluid into a sealable container.
☒ Dispose of fluid in accordance with local regulations.
Fill with good quality hydraulic oil as recommended above. Reinstall vented oil filler plug.
5.4 Lubrication
Use a light machine oil to lubricate pivot points, hinges etc.
5.5 Storage
✗ Depressurize and disconnect hydraulic hoses from application.
✗ Clean the pump and hose and couplers
Store in clean dry environment, avoid temperature extremes.
6. TROUBLE SHOOTING
IMPORTANT: EAGLE PRO air hydraulic pumps should be repaired only by a qualified operator or Authorized EAGLE PRO Service Centers. Repairing air hydraulic pumps without special tools and knowledge may result in personal injury.
Always release pressure and disconnect hose(s) before making repairs.
| Symptom | Possible Causes | Corrective Action |
| Application will not extend, move or respond to pressurized fluid | Overload conditionRelease valve not closed | Remedy overload conditionEnsure release valve closed |
| Application responds to pressurized fluid, but system does not maintain pressure | Overload conditionRelease valve not closedHydraulic unit malfunction | Remedy overload conditionEnsure release valve closed |
| Application will not return fluid to pump (i.e. cylinder will not retract) | Malfunctioning couplerReservoir overfilled | Secure load by other means.Open release valve, depressurize pump and hose, remove coupler and/ or application, then renew or replaceSecure load by other means.Open release valve, depressurize pump and hose, remove coupler and/ or application, then drain fluid to proper level |
| Application will not fully extend (cylinder or spreader) | Fluid level low | Follow symptom 3 procedure for securing load, depressurizing pump, remove application, then ensure proper fluid level |
| Poor performance | Air trapped in system | Ensure proper fluid levelEnsure vented oil filler plug let pressurized reservoir air escape (see BEFORE USE) |
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu803nong11hao1602A-1609shi,baoshanqu,shanghai200000CN.
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, RanchoCucamonga, CA91730
| REPE |
E-CrossStuGmbH
MainzerLandstr.69,60329FrankfurtamMain.
| REPU |
YHCONSULTINGLIMITED.
K/OYHConsultingLimitedOffice147,CenturionHouse,
LondonRoad, Staines-upon-Thames, Surrey, TW184AX
VEVOR®
TOUGH TOOLS, HALF PRICE
Technical Support and E-Warranty Certificate www.vevor.com/support
VEVOR®
TOUGH TOOLS, HALF PRICE
natural_image
Black and silver electric shock absorber device with metallic casing and ventilation slots (no text or symbols visible)Repair Parts Sheets for hydraulic air hydraulic pumps are available from your nearest authorized EAGLE PRO Service Center or EAGLE PRO Sales office.
natural_image
Black and silver electric shock absorber device with metallic casing and handle (no visible text or symbols)NOTE
PLEASE READ AND FOLLOW THIS INSTRUCTION BEFORE YOU USE EAGLE PRO AIR HYDRAULIC PUMPS.
Carefully inspect all components for shipping damage. If shipping damage is found, notify carrier at once. The carrier is responsible for any damage resulting from shipment.
1. SAFETY
To avoid personal injury or property damage, please follow all safety precautions. EAGLE PRO cannot be responsible for injury or damage resulting from unsafe and incorrect products use or system operation, or lack of maintenance.
DANGER is used when your action or lack of action may cause serious injury or even death. WARNING indicates a potential danger that requires correct action to avoid personal injury. IMPORTANT indicates correct action to prevent damage or equipment failure.
DANGER
The hydraulic equipment operator must be a qualified operator with correct training and work experience with hydraulic equipment. Lack of knowledge in any of these areas can lead to equipment damage or personal injury.
To avoid personal injury, please do not modify or weld hydraulic equipment without approval of EAGLE PRO.
✗ Never lift a more than the rated capacity of the cylinder, overloading causes equipment failure and serious personal injury.
✗ The cylinder is a load lifting device, not a load holding device. After the load has been raised or lowered, it must always be held mechanically, never work under a load supported by a hydraulic unit.
Keep hands and feet away from cylinder and workplace during operation to avoid personal injury.
Do not put unbalanced or off-center loads on cylinders. The incorrect load can result in equipment failure and serious personal injury.
WARNING
※ Wear safety glasses, helmet and other necessary personal protective equipment when operating hydraulic equipment.
Cylinder used to lift load must have solid footing for correct support. Please select steel or wood blocks that are capable of supporting the load.
Install Pressure gauges in the system to monitor the operating pressure. The gauge must have the same pressure rating as the pump and cylinder. The wrong gauges may result in personal injury.
The system operating pressure must lower than the lowest rated pressure in the system.
Carefully inspect the cylinder and couplers before use cylinder. Never connect a cylinder with damaged couplers or damaged port threads. The damaged coupler or damaged port threads may cause equipment failure and possible personal injury.
Install coupler in a clean environment; prevent dirt or other debris from entering into cylinder body or tube. Dirt or other debris will damage the cylinder and result in equipment failure and possible personal injury.
Before removing or tightening hose or coupler, release hydraulic pressure in system.
Never handle pressurized hoses; escaping oil under high pressure can penetrate the skin, causing serious injury. Seek medical aid immediately if injured.
Use EAGLE PRO or other approved hydraulic oil
For hydraulic technical help or repair service. Please contact the authorized EAGLE PRO Service Center in your area. EAGLE PRO has no obligations under any warranty with respect to products that have been repaired by unauthorized personnel, modified, or damaged through misuse, abuse, accident, neglect, or mishandling.
IMPORTANT
Keep the air hydraulic pump clean at all time.
When the Air hydraulic pump is not in use, release the valve, remove hose and use rubber cap to recover the port.
Do not drop objects on hose.
Do not lift or carry hydraulic equipment by the hoses or couplers, use the handle or other means.
Use hydraulic equipment in normal operating temperatures. Do not use equipment in temperatures of 65 °C (150°F) or higher. Overheating will soften seals and weakens hose material, resulting in oil leaking or other equipment failure.
2. DESCRIPTION
Air Hydraulic Pump supplies hydraulic fluid pressure to selected tools. It consists of an in-line air and hydraulic cylinder.
SPECIFICATIONS
| Model | Pressure Rating (psi) | Useable Oil Capacity (cu.in) | Input Air pressure (psi) | Input Port Threads (NPT) | Output port Threads (NPT) | Oil Delivery (cu.in / min) | Operational Manner | Weight lbs | |
| No load | load | ||||||||
| TL-A5122 | 10,000 | 30.5 | 90-145 | 1/4 -18 | 3/8 -18 | 49.5 | 7.6 | Foot Pedal | 13.2 |
3. BEFORE USE
Note: Always secure threaded port connections with non-hardening pipe thread compound. Tighten securely to prevent accidental removal of components while in use. Take care not to introduce thread compound into port openings.
Familiarize yourself with the specifications and illustrations in this operator 担 manual. Know your pump, its limitations and how it operates before attempting to use. Refer to Specification chart on above for details of oil port thread size, usable oil capacity, and other information.
4. OPERATION
Operation of the pump as follow:
Connect the hose of the Air Hydraulic pump to the hydraulic coupling on the selected tool.
Connect the air supply line to the Air Hydraulic pump. Air supply should be 5-10 CFM at 100 PSI to obtain proper operating characteristic. The air line should be equipped with an air line filter.
※ To Advance, hold or Retract
Foot Pedal operates pumps:
a. Depress the Pump end of pedal will pump hydraulic oil to the system.
b. Stop depressing the Pump or Release end will stop and hold the pressure.
c. Depress the Release end of pedal will release the pressure in the system.
text_image
PUMP Air input port RELEASE Hydraulic Oil output port5. MAINTENANCE
5.1 Inspect the connections
Inspect hoses and connections, tighten connections as needed. Use non-hardening pipe thread compound when servicing connections.
5.2 Adding Hydraulic Fluid
✗ Depressurize and disconnect hydraulic hose from application.
✗ Remove the oil filler plug located on the side of the reservoir.
Use a small funnel to fill reservoir.
Wipe up any spilled fluid and reinstall the oil filler plug.
natural_image
Close-up of a mechanical component with a white flange and bolted end, showing a directional arrow (no text or symbols)Note: Use only EAGLE PRO or other approved hydraulic oil. Never use brake fluid, transmission fluid, turbine oil, motor oil, alcohol, glycerin etc. Use of other than good quality hydraulic oil will void warranty and damage the pump, hose and application.
5.3 Changing Hydraulic Fluid
For best results, change fluid once a year.
✗ Repeat step 5.2 above, and then pour used fluid into a sealable container.
Dispose of fluid in accordance with local regulations.
Fill with good quality hydraulic oil as recommended above. Reinstall vented oil filler plug.
5.4 Lubrication
Use a light machine oil to lubricate pivot points, hinges etc.
5.5 Storage
✗ Depressurize and disconnect hydraulic hoses from application.
✗ Clean the pump and hose and couplers
Store in clean dry environment, avoid temperature extremes.
6. TROUBLE SHOOTING
IMPORTANT: EAGLE PRO air hydraulic pumps should be repaired only by a qualified operator or Authorized EAGLE PRO Service Centers. Repairing air hydraulic pumps without special tools and knowledge may result in personal injury.
Always release pressure and disconnect hose(s) before making repairs.
| Symptom | Possible Causes | Corrective Action |
| Application will not extend, move or respond to pressurized fluid | Overload conditionRelease valve not closed | Remedy overload conditionEnsure release valve closed |
| Application responds to pressurized fluid, but system does not maintain pressure | Overload conditionRelease valve not closedHydraulic unit malfunction | Remedy overload conditionEnsure release valve closed |
| Application will not return fluid to pump (i.e. cylinder will not retract) | Malfunctioning couplerReservoir overfilled | Secure load by other means.Open release valve, depressurize pump and hose, remove coupler and/or application, then renew or replaceSecure load by other means.Open release valve, depressurize pump and hose, remove coupler and/or application, then drain fluid to proper level |
| Application will not fully extend (cylinder or spreader) | Fluid level low | Follow symptom 3 procedure for securing load, depressurizing pump, remove application, then ensure proper fluid level |
| Poor performance | Air trapped in system | Ensure proper fluid levelEnsure vented oil filler plug let pressurized reservoir air escape (see BEFORE USE) |
Fabricant : Shanghaimuxinmuyeyouxiangongsi Adresse :
Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Importé en Australie : SIHAO PTY LTD, 1 ROKEVA STREETESTWOOD NSW 2122 Australie
C/O YH Consulting Limited Bureau 147, Centurion House,
London Road, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
www.vevor.com/support
Lufthydraulikpumpe
BENUTZERHANDBUCH
MODELL: TL-A5122
natural_image
Black industrial electrical plug device with metallic base and side slots (no visible text or symbols)Repair Parts Sheets for hydraulic air hydraulic pumps are available from your nearest authorized EAGLE PRO Service Center or EAGLE PRO Sales office.
natural_image
Black and silver electric shock absorber device with metallic casing and side slots (no visible text or symbols)NOTE
PLEASE READ AND FOLLOW THIS INSTRUCTION BEFORE YOU USE EAGLE PRO AIR HYDRAULIC PUMPS.
Carefully inspect all components for shipping damage. If shipping damage is found, notify carrier at once. The carrier is responsible for any damage resulting from shipment.
1. SAFETY
To avoid personal injury or property damage, please follow all safety precautions. EAGLE PRO cannot be responsible for injury or damage resulting from unsafe and incorrect products use or system operation, or lack of maintenance.
DANGER is used when your action or lack of action may cause serious injury or even death. WARNING indicates a potential danger that requires correct action to avoid personal injury. IMPORTANT indicates correct action to prevent damage or equipment failure.
DANGER
The hydraulic equipment operator must be a qualified operator with correct training and work experience with hydraulic equipment. Lack of knowledge in any of these areas can lead to equipment damage or personal injury.
To avoid personal injury, please do not modify or weld hydraulic equipment without approval of EAGLE PRO.
✗ Never lift a more than the rated capacity of the cylinder, overloading causes equipment failure and serious personal injury.
✗ The cylinder is a load lifting device, not a load holding device. After the load has been raised or lowered, it must always be held mechanically, never work under a load supported by a hydraulic unit.
Keep hands and feet away from cylinder and workplace during operation to avoid personal injury.
Do not put unbalanced or off-center loads on cylinders. The incorrect load can result in equipment failure and serious personal injury.
WARNING
※ Wear safety glasses, helmet and other necessary personal protective equipment when operating hydraulic equipment.
Cylinder used to lift load must have solid footing for correct support. Please select steel or wood blocks that are capable of supporting the load.
Install Pressure gauges in the system to monitor the operating pressure. The gauge must have the same pressure rating as the pump and cylinder. The wrong gauges may result in personal injury.
The system operating pressure must lower than the lowest rated pressure in the system.
Carefully inspect the cylinder and couplers before use cylinder. Never connect a cylinder with damaged couplers or damaged port threads. The damaged coupler or damaged port threads may cause equipment failure and possible personal injury.
Install coupler in a clean environment; prevent dirt or other debris from entering into cylinder body or tube. Dirt or other debris will damage the cylinder and result in equipment failure and possible personal injury.
Before removing or tightening hose or coupler, release hydraulic pressure in system.
Never handle pressurized hoses; escaping oil under high pressure can penetrate the skin, causing serious injury. Seek medical aid immediately if injured.
Use EAGLE PRO or other approved hydraulic oil
For hydraulic technical help or repair service. Please contact the authorized EAGLE PRO Service Center in your area. EAGLE PRO has no obligations under any warranty with respect to products that have been repaired by unauthorized personnel, modified, or damaged through misuse, abuse, accident, neglect, or mishandling.
IMPORTANT
Keep the air hydraulic pump clean at all time.
When the Air hydraulic pump is not in use, release the valve, remove hose and use rubber cap to recover the port.
Do not drop objects on hose.
Do not lift or carry hydraulic equipment by the hoses or couplers, use the handle or other means.
Use hydraulic equipment in normal operating temperatures. Do not use equipment in temperatures of 65 °C (150°F) or higher. Overheating will soften seals and weakens hose material, resulting in oil leaking or other equipment failure.
2. DESCRIPTION
Air Hydraulic Pump supplies hydraulic fluid pressure to selected tools. It consists of an in-line air and hydraulic cylinder.
SPECIFICATIONS
| Model | Pressure Rating (psi) | Useable Oil Capacity (cu.in) | Input Air pressure (psi) | Input Port Threads (NPT) | Output port Threads (NPT) | Oil Delivery (cu.in / min) | Operational Manner | Weight lbs | |
| No load | load | ||||||||
| TL-A5122 | 10,000 | 30.5 | 90-145 | 1/4 -18 | 3/8 -18 | 49.5 | 7.6 | Foot Pedal | 13.2 |
3. BEFORE USE
Note: Always secure threaded port connections with non-hardening pipe thread compound. Tighten securely to prevent accidental removal of components while in use. Take care not to introduce thread compound into port openings.
Familiarize yourself with the specifications and illustrations in this operator 担 manual. Know your pump, its limitations and how it operates before attempting to use. Refer to Specification chart on above for details of oil port thread size, usable oil capacity, and other information.
4. OPERATION
Operation of the pump as follow:
Connect the hose of the Air Hydraulic pump to the hydraulic coupling on the selected tool.
Connect the air supply line to the Air Hydraulic pump. Air supply should be 5-10 CFM at 100 PSI to obtain proper operating characteristic. The air line should be equipped with an air line filter.
※ To Advance, hold or Retract
Foot Pedal operates pumps:
a. Depress the Pump end of pedal will pump hydraulic oil to the system.
b. Stop depressing the Pump or Release end will stop and hold the pressure.
c. Depress the Release end of pedal will release the pressure in the system.
text_image
PUMP Air input port RELEASE Hydraulic Oil output port5. MAINTENANCE
5.1 Inspect the connections
Inspect hoses and connections, tighten connections as needed. Use non-hardening pipe thread compound when servicing connections.
5.2 Adding Hydraulic Fluid
✗ Depressurize and disconnect hydraulic hose from application.
✗ Remove the oil filler plug located on the side of the reservoir.
Use a small funnel to fill reservoir.
Wipe up any spilled fluid and reinstall the oil filler plug.
natural_image
Close-up of a mechanical component with a white flange and bolted end, showing a directional arrow (no text or symbols)Note: Use only EAGLE PRO or other approved hydraulic oil. Never use brake fluid, transmission fluid, turbine oil, motor oil, alcohol, glycerin etc. Use of other than good quality hydraulic oil will void warranty and damage the pump, hose and application.
5.3 Changing Hydraulic Fluid
For best results, change fluid once a year.
✗ Repeat step 5.2 above, and then pour used fluid into a sealable container.
Dispose of fluid in accordance with local regulations.
Fill with good quality hydraulic oil as recommended above. Reinstall vented oil filler plug.
5.4 Lubrication
Use a light machine oil to lubricate pivot points, hinges etc.
5.5 Storage
✗ Depressurize and disconnect hydraulic hoses from application.
✗ Clean the pump and hose and couplers
Store in clean dry environment, avoid temperature extremes.
6. TROUBLE SHOOTING
IMPORTANT: EAGLE PRO air hydraulic pumps should be repaired only by a qualified operator or Authorized EAGLE PRO Service Centers. Repairing air hydraulic pumps without special tools and knowledge may result in personal injury.
Always release pressure and disconnect hose(s) before making repairs.
| Symptom | Possible Causes | Corrective Action |
| Application will not extend, move or respond to pressurized fluid | Overload conditionRelease valve not closed | Remedy overload conditionEnsure release valve closed |
| Application responds to pressurized fluid, but system does not maintain pressure | Overload conditionRelease valve not closedHydraulic unit malfunction | Remedy overload conditionEnsure release valve closed |
| Application will not return fluid to pump (i.e. cylinder will not retract) | Malfunctioning couplerReservoir overfilled | Secure load by other means.Open release valve, depressurize pump and hose, remove coupler and/or application, then renew or replaceSecure load by other means.Open release valve, depressurize pump and hose, remove coupler and/or application, then drain fluid to proper level |
| Application will not fully extend (cylinder or spreader) | Fluid level low | Follow symptom 3 procedure for securing load, depressurizing pump, remove application, then ensure proper fluid level |
| Poor performance | Air trapped in system | Ensure proper fluid levelEnsure vented oil filler plug let pressurized reservoir air escape (see BEFORE USE) |
Hersteller: Shanghaimuxinmuyeyouxiangongsi
Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.
Nach AUS importiert: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australien
Importiert in die USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
| Vertreter der EG |
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt am Main.
| UK REP |
YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147, Centurion House,
London Road, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
elettronica www.vevor.com/support
POMPA IDRAULICA PNEUMATICA
MANUALE D'USO
MODELLO: TL-A5122
natural_image
Black and silver electric shock absorber device with metallic casing and side slots (no visible text or symbols)Repair Parts Sheets for hydraulic air hydraulic pumps are available from your nearest authorized EAGLE PRO Service Center or EAGLE PRO Sales office.
natural_image
Black industrial electrical plug device with metallic casing and side-mounted handle (no visible text or symbols)NOTE
PLEASE READ AND FOLLOW THIS INSTRUCTION BEFORE YOU USE EAGLE PRO AIR HYDRAULIC PUMPS.
Carefully inspect all components for shipping damage. If shipping damage is found, notify carrier at once. The carrier is responsible for any damage resulting from shipment.
1. SAFETY
To avoid personal injury or property damage, please follow all safety precautions. EAGLE PRO cannot be responsible for injury or damage resulting from unsafe and incorrect products use or system operation, or lack of maintenance.
DANGER is used when your action or lack of action may cause serious injury or even death. WARNING indicates a potential danger that requires correct action to avoid personal injury. IMPORTANT indicates correct action to prevent damage or equipment failure.
DANGER
The hydraulic equipment operator must be a qualified operator with correct training and work experience with hydraulic equipment. Lack of knowledge in any of these areas can lead to equipment damage or personal injury.
To avoid personal injury, please do not modify or weld hydraulic equipment without approval of EAGLE PRO.
✗ Never lift a more than the rated capacity of the cylinder, overloading causes equipment failure and serious personal injury.
✗ The cylinder is a load lifting device, not a load holding device. After the load has been raised or lowered, it must always be held mechanically, never work under a load supported by a hydraulic unit.
Keep hands and feet away from cylinder and workplace during operation to avoid personal injury.
Do not put unbalanced or off-center loads on cylinders. The incorrect load can result in equipment failure and serious personal injury.
WARNING
※ Wear safety glasses, helmet and other necessary personal protective equipment when operating hydraulic equipment.
Cylinder used to lift load must have solid footing for correct support. Please select steel or wood blocks that are capable of supporting the load.
Install Pressure gauges in the system to monitor the operating pressure. The gauge must have the same pressure rating as the pump and cylinder. The wrong gauges may result in personal injury.
The system operating pressure must lower than the lowest rated pressure in the system.
Carefully inspect the cylinder and couplers before use cylinder. Never connect a cylinder with damaged couplers or damaged port threads. The damaged coupler or damaged port threads may cause equipment failure and possible personal injury.
Install coupler in a clean environment; prevent dirt or other debris from entering into cylinder body or tube. Dirt or other debris will damage the cylinder and result in equipment failure and possible personal injury.
Before removing or tightening hose or coupler, release hydraulic pressure in system.
Never handle pressurized hoses; escaping oil under high pressure can penetrate the skin, causing serious injury. Seek medical aid immediately if injured.
Use EAGLE PRO or other approved hydraulic oil
For hydraulic technical help or repair service. Please contact the authorized EAGLE PRO Service Center in your area. EAGLE PRO has no obligations under any warranty with respect to products that have been repaired by unauthorized personnel, modified, or damaged through misuse, abuse, accident, neglect, or mishandling.
IMPORTANT
Keep the air hydraulic pump clean at all time.
When the Air hydraulic pump is not in use, release the valve, remove hose and use rubber cap to recover the port.
Do not drop objects on hose.
Do not lift or carry hydraulic equipment by the hoses or couplers, use the handle or other means.
Use hydraulic equipment in normal operating temperatures. Do not use equipment in temperatures of 65 °C (150°F) or higher. Overheating will soften seals and weakens hose material, resulting in oil leaking or other equipment failure.
2. DESCRIPTION
Air Hydraulic Pump supplies hydraulic fluid pressure to selected tools. It consists of an in-line air and hydraulic cylinder.
SPECIFICATIONS
| Model | Pressure Rating (psi) | Useable Oil Capacity (cu.in) | Input Air pressure (psi) | Input Port Threads (NPT) | Output port Threads (NPT) | Oil Delivery (cu.in / min) | Operational Manner | Weight lbs | |
| No load | load | ||||||||
| TL-A5122 | 10,000 | 30.5 | 90-145 | 1/4 -18 | 3/8 -18 | 49.5 | 7.6 | Foot Pedal | 13.2 |
3. BEFORE USE
Note: Always secure threaded port connections with non-hardening pipe thread compound. Tighten securely to prevent accidental removal of components while in use. Take care not to introduce thread compound into port openings.
Familiarize yourself with the specifications and illustrations in this operator 担 manual. Know your pump, its limitations and how it operates before attempting to use. Refer to Specification chart on above for details of oil port thread size, usable oil capacity, and other information.
4. OPERATION
Operation of the pump as follow:
Connect the hose of the Air Hydraulic pump to the hydraulic coupling on the selected tool.
Connect the air supply line to the Air Hydraulic pump. Air supply should be 5-10 CFM at 100 PSI to obtain proper operating characteristic. The air line should be equipped with an air line filter.
※ To Advance, hold or Retract
Foot Pedal operates pumps:
a. Depress the Pump end of pedal will pump hydraulic oil to the system.
b. Stop depressing the Pump or Release end will stop and hold the pressure.
c. Depress the Release end of pedal will release the pressure in the system.
text_image
PUMP Air input port RELEASE Hydraulic Oil output port5. MAINTENANCE
5.1 Inspect the connections
Inspect hoses and connections, tighten connections as needed. Use non-hardening pipe thread compound when servicing connections.
5.2 Adding Hydraulic Fluid
✗ Depressurize and disconnect hydraulic hose from application.
✗ Remove the oil filler plug located on the side of the reservoir.
Use a small funnel to fill reservoir.
Wipe up any spilled fluid and reinstall the oil filler plug.
natural_image
Close-up of a mechanical component with a white flange and bolted end, showing a directional arrow (no text or symbols)Note: Use only EAGLE PRO or other approved hydraulic oil. Never use brake fluid, transmission fluid, turbine oil, motor oil, alcohol, glycerin etc. Use of other than good quality hydraulic oil will void warranty and damage the pump, hose and application.
5.3 Changing Hydraulic Fluid
For best results, change fluid once a year.
✗ Repeat step 5.2 above, and then pour used fluid into a sealable container.
Dispose of fluid in accordance with local regulations.
Fill with good quality hydraulic oil as recommended above. Reinstall vented oil filler plug.
5.4 Lubrication
Use a light machine oil to lubricate pivot points, hinges etc.
5.5 Storage
✗ Depressurize and disconnect hydraulic hoses from application.
✗ Clean the pump and hose and couplers
Store in clean dry environment, avoid temperature extremes.
6. TROUBLE SHOOTING
IMPORTANT: EAGLE PRO air hydraulic pumps should be repaired only by a qualified operator or Authorized EAGLE PRO Service Centers. Repairing air hydraulic pumps without special tools and knowledge may result in personal injury.
Always release pressure and disconnect hose(s) before making repairs.
| Symptom | Possible Causes | Corrective Action |
| Application will not extend, move or respond to pressurized fluid | Overload conditionRelease valve not closed | Remedy overload conditionEnsure release valve closed |
| Application responds to pressurized fluid, but system does not maintain pressure | Overload conditionRelease valve not closedHydraulic unit malfunction | Remedy overload conditionEnsure release valve closed |
| Application will not return fluid to pump (i.e. cylinder will not retract) | Malfunctioning couplerReservoir overfilled | Secure load by other means.Open release valve, depressurize pump and hose, remove coupler and/or application, then renew or replaceSecure load by other means.Open release valve, depressurize pump and hose, remove coupler and/or application, then drain fluid to proper level |
| Application will not fully extend (cylinder or spreader) | Fluid level low | Follow symptom 3 procedure for securing load, depressurizing pump, remove application, then ensure proper fluid level |
| Poor performance | Air trapped in system | Ensure proper fluid levelEnsure vented oil filler plug let pressurized reservoir air escape (see BEFORE USE) |
Importato in AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
C/O YH Consulting Limited Ufficio 147, Centurion House,
London Road, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
natural_image
Black and silver electric shock absorber device with metallic casing and side slots (no visible text or symbols)Repair Parts Sheets for hydraulic air hydraulic pumps are available from your nearest authorized EAGLE PRO Service Center or EAGLE PRO Sales office.
natural_image
Black and silver electric shock absorber device with metallic casing and side slots (no visible text or symbols)NOTE
PLEASE READ AND FOLLOW THIS INSTRUCTION BEFORE YOU USE EAGLE PRO AIR HYDRAULIC PUMPS.
Carefully inspect all components for shipping damage. If shipping damage is found, notify carrier at once. The carrier is responsible for any damage resulting from shipment.
1. SAFETY
To avoid personal injury or property damage, please follow all safety precautions. EAGLE PRO cannot be responsible for injury or damage resulting from unsafe and incorrect products use or system operation, or lack of maintenance.
DANGER is used when your action or lack of action may cause serious injury or even death. WARNING indicates a potential danger that requires correct action to avoid personal injury. IMPORTANT indicates correct action to prevent damage or equipment failure.
DANGER
The hydraulic equipment operator must be a qualified operator with correct training and work experience with hydraulic equipment. Lack of knowledge in any of these areas can lead to equipment damage or personal injury.
To avoid personal injury, please do not modify or weld hydraulic equipment without approval of EAGLE PRO.
✗ Never lift a more than the rated capacity of the cylinder, overloading causes equipment failure and serious personal injury.
✗ The cylinder is a load lifting device, not a load holding device. After the load has been raised or lowered, it must always be held mechanically, never work under a load supported by a hydraulic unit.
Keep hands and feet away from cylinder and workplace during operation to avoid personal injury.
Do not put unbalanced or off-center loads on cylinders. The incorrect load can result in equipment failure and serious personal injury.
WARNING
※ Wear safety glasses, helmet and other necessary personal protective equipment when operating hydraulic equipment.
Cylinder used to lift load must have solid footing for correct support. Please select steel or wood blocks that are capable of supporting the load.
Install Pressure gauges in the system to monitor the operating pressure. The gauge must have the same pressure rating as the pump and cylinder. The wrong gauges may result in personal injury.
The system operating pressure must lower than the lowest rated pressure in the system.
Carefully inspect the cylinder and couplers before use cylinder. Never connect a cylinder with damaged couplers or damaged port threads. The damaged coupler or damaged port threads may cause equipment failure and possible personal injury.
Install coupler in a clean environment; prevent dirt or other debris from entering into cylinder body or tube. Dirt or other debris will damage the cylinder and result in equipment failure and possible personal injury.
Before removing or tightening hose or coupler, release hydraulic pressure in system.
Never handle pressurized hoses; escaping oil under high pressure can penetrate the skin, causing serious injury. Seek medical aid immediately if injured.
Use EAGLE PRO or other approved hydraulic oil
For hydraulic technical help or repair service. Please contact the authorized EAGLE PRO Service Center in your area. EAGLE PRO has no obligations under any warranty with respect to products that have been repaired by unauthorized personnel, modified, or damaged through misuse, abuse, accident, neglect, or mishandling.
IMPORTANT
Keep the air hydraulic pump clean at all time.
When the Air hydraulic pump is not in use, release the valve, remove hose and use rubber cap to recover the port.
Do not drop objects on hose.
Do not lift or carry hydraulic equipment by the hoses or couplers, use the handle or other means.
Use hydraulic equipment in normal operating temperatures. Do not use equipment in temperatures of 65 °C (150°F) or higher. Overheating will soften seals and weakens hose material, resulting in oil leaking or other equipment failure.
2. DESCRIPTION
Air Hydraulic Pump supplies hydraulic fluid pressure to selected tools. It consists of an in-line air and hydraulic cylinder.
SPECIFICATIONS
| Model | Pressure Rating (psi) | Useable Oil Capacity (cu.in) | Input Air pressure (psi) | Input Port Threads (NPT) | Output port Threads (NPT) | Oil Delivery (cu.in / min) | Operational Manner | Weight lbs | |
| No load | load | ||||||||
| TL-A5122 | 10,000 | 30.5 | 90-145 | 1/4 -18 | 3/8 -18 | 49.5 | 7.6 | Foot Pedal | 13.2 |
3. BEFORE USE
Note: Always secure threaded port connections with non-hardening pipe thread compound. Tighten securely to prevent accidental removal of components while in use. Take care not to introduce thread compound into port openings.
Familiarize yourself with the specifications and illustrations in this operator 担 manual. Know your pump, its limitations and how it operates before attempting to use. Refer to Specification chart on above for details of oil port thread size, usable oil capacity, and other information.
4. OPERATION
Operation of the pump as follow:
Connect the hose of the Air Hydraulic pump to the hydraulic coupling on the selected tool.
Connect the air supply line to the Air Hydraulic pump. Air supply should be 5-10 CFM at 100 PSI to obtain proper operating characteristic. The air line should be equipped with an air line filter.
※ To Advance, hold or Retract
Foot Pedal operates pumps:
a. Depress the Pump end of pedal will pump hydraulic oil to the system.
b. Stop depressing the Pump or Release end will stop and hold the pressure.
c. Depress the Release end of pedal will release the pressure in the system.
text_image
PUMP Air input port RELEASE Hydraulic Oil output port5. MAINTENANCE
5.1 Inspect the connections
Inspect hoses and connections, tighten connections as needed. Use non-hardening pipe thread compound when servicing connections.
5.2 Adding Hydraulic Fluid
✗ Depressurize and disconnect hydraulic hose from application.
✗ Remove the oil filler plug located on the side of the reservoir.
Use a small funnel to fill reservoir.
Wipe up any spilled fluid and reinstall the oil filler plug.
natural_image
Close-up of a mechanical component with a white flange and bolted end, showing a directional arrow (no text or symbols)Note: Use only EAGLE PRO or other approved hydraulic oil. Never use brake fluid, transmission fluid, turbine oil, motor oil, alcohol, glycerin etc. Use of other than good quality hydraulic oil will void warranty and damage the pump, hose and application.
5.3 Changing Hydraulic Fluid
For best results, change fluid once a year.
✗ Repeat step 5.2 above, and then pour used fluid into a sealable container.
Dispose of fluid in accordance with local regulations.
Fill with good quality hydraulic oil as recommended above. Reinstall vented oil filler plug.
5.4 Lubrication
Use a light machine oil to lubricate pivot points, hinges etc.
5.5 Storage
✗ Depressurize and disconnect hydraulic hoses from application.
✗ Clean the pump and hose and couplers
Store in clean dry environment, avoid temperature extremes.
6. TROUBLE SHOOTING
IMPORTANT: EAGLE PRO air hydraulic pumps should be repaired only by a qualified operator or Authorized EAGLE PRO Service Centers. Repairing air hydraulic pumps without special tools and knowledge may result in personal injury.
Always release pressure and disconnect hose(s) before making repairs.
| Symptom | Possible Causes | Corrective Action |
| Application will not extend, move or respond to pressurized fluid | Overload conditionRelease valve not closed | Remedy overload conditionEnsure release valve closed |
| Application responds to pressurized fluid, but system does not maintain pressure | Overload conditionRelease valve not closedHydraulic unit malfunction | Remedy overload conditionEnsure release valve closed |
| Application will not return fluid to pump (i.e. cylinder will not retract) | Malfunctioning couplerReservoir overfilled | Secure load by other means.Open release valve, depressurize pump and hose, remove coupler and/or application, then renew or replaceSecure load by other means.Open release valve, depressurize pump and hose, remove coupler and/or application, then drain fluid to proper level |
| Application will not fully extend (cylinder or spreader) | Fluid level low | Follow symptom 3 procedure for securing load, depressurizing pump, remove application, then ensure proper fluid level |
| Poor performance | Air trapped in system | Ensure proper fluid levelEnsure vented oil filler plug let pressurized reservoir air escape (see BEFORE USE) |
Fabricante: Shanghaimuxinmuyeyouxiangongsi
Importado a AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Importado a EE. UU.: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
text_image
REPRESENTANTE DE LA CEE-CrossStu GmbH
C/O YH Consulting Limited Oficina 147, Centurion House,
London Road, Staines upon Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
natural_image
Black and silver electric shock absorber device with metallic casing and side slots (no visible text or symbols)Repair Parts Sheets for hydraulic air hydraulic pumps are available from your nearest authorized EAGLE PRO Service Center or EAGLE PRO Sales office.
natural_image
Black and silver electric shock absorber device with metallic casing and handle (no visible text or symbols)NOTE
PLEASE READ AND FOLLOW THIS INSTRUCTION BEFORE YOU USE EAGLE PRO AIR HYDRAULIC PUMPS.
Carefully inspect all components for shipping damage. If shipping damage is found, notify carrier at once. The carrier is responsible for any damage resulting from shipment.
1. SAFETY
To avoid personal injury or property damage, please follow all safety precautions. EAGLE PRO cannot be responsible for injury or damage resulting from unsafe and incorrect products use or system operation, or lack of maintenance.
DANGER is used when your action or lack of action may cause serious injury or even death. WARNING indicates a potential danger that requires correct action to avoid personal injury. IMPORTANT indicates correct action to prevent damage or equipment failure.
DANGER
The hydraulic equipment operator must be a qualified operator with correct training and work experience with hydraulic equipment. Lack of knowledge in any of these areas can lead to equipment damage or personal injury.
To avoid personal injury, please do not modify or weld hydraulic equipment without approval of EAGLE PRO.
✗ Never lift a more than the rated capacity of the cylinder, overloading causes equipment failure and serious personal injury.
✗ The cylinder is a load lifting device, not a load holding device. After the load has been raised or lowered, it must always be held mechanically, never work under a load supported by a hydraulic unit.
Keep hands and feet away from cylinder and workplace during operation to avoid personal injury.
Do not put unbalanced or off-center loads on cylinders. The incorrect load can result in equipment failure and serious personal injury.
WARNING
※ Wear safety glasses, helmet and other necessary personal protective equipment when operating hydraulic equipment.
Cylinder used to lift load must have solid footing for correct support. Please select steel or wood blocks that are capable of supporting the load.
Install Pressure gauges in the system to monitor the operating pressure. The gauge must have the same pressure rating as the pump and cylinder. The wrong gauges may result in personal injury.
The system operating pressure must lower than the lowest rated pressure in the system.
Carefully inspect the cylinder and couplers before use cylinder. Never connect a cylinder with damaged couplers or damaged port threads. The damaged coupler or damaged port threads may cause equipment failure and possible personal injury.
Install coupler in a clean environment; prevent dirt or other debris from entering into cylinder body or tube. Dirt or other debris will damage the cylinder and result in equipment failure and possible personal injury.
Before removing or tightening hose or coupler, release hydraulic pressure in system.
Never handle pressurized hoses; escaping oil under high pressure can penetrate the skin, causing serious injury. Seek medical aid immediately if injured.
Use EAGLE PRO or other approved hydraulic oil
For hydraulic technical help or repair service. Please contact the authorized EAGLE PRO Service Center in your area. EAGLE PRO has no obligations under any warranty with respect to products that have been repaired by unauthorized personnel, modified, or damaged through misuse, abuse, accident, neglect, or mishandling.
IMPORTANT
Keep the air hydraulic pump clean at all time.
When the Air hydraulic pump is not in use, release the valve, remove hose and use rubber cap to recover the port.
Do not drop objects on hose.
Do not lift or carry hydraulic equipment by the hoses or couplers, use the handle or other means.
Use hydraulic equipment in normal operating temperatures. Do not use equipment in temperatures of 65 °C (150°F) or higher. Overheating will soften seals and weakens hose material, resulting in oil leaking or other equipment failure.
2. DESCRIPTION
Air Hydraulic Pump supplies hydraulic fluid pressure to selected tools. It consists of an in-line air and hydraulic cylinder.
SPECIFICATIONS
| Model | Pressure Rating (psi) | Useable Oil Capacity (cu.in) | Input Air pressure (psi) | Input Port Threads (NPT) | Output port Threads (NPT) | Oil Delivery (cu.in / min) | Operational Manner | Weight lbs | |
| No load | load | ||||||||
| TL-A5122 | 10,000 | 30.5 | 90-145 | 1/4 -18 | 3/8 -18 | 49.5 | 7.6 | Foot Pedal | 13.2 |
3. BEFORE USE
Note: Always secure threaded port connections with non-hardening pipe thread compound. Tighten securely to prevent accidental removal of components while in use. Take care not to introduce thread compound into port openings.
Familiarize yourself with the specifications and illustrations in this operator 担 manual. Know your pump, its limitations and how it operates before attempting to use. Refer to Specification chart on above for details of oil port thread size, usable oil capacity, and other information.
4. OPERATION
Operation of the pump as follow:
Connect the hose of the Air Hydraulic pump to the hydraulic coupling on the selected tool.
Connect the air supply line to the Air Hydraulic pump. Air supply should be 5-10 CFM at 100 PSI to obtain proper operating characteristic. The air line should be equipped with an air line filter.
※ To Advance, hold or Retract
Foot Pedal operates pumps:
a. Depress the Pump end of pedal will pump hydraulic oil to the system.
b. Stop depressing the Pump or Release end will stop and hold the pressure.
c. Depress the Release end of pedal will release the pressure in the system.
text_image
PUMP Air input port RELEASE Hydraulic Oil output port5. MAINTENANCE
5.1 Inspect the connections
Inspect hoses and connections, tighten connections as needed. Use non-hardening pipe thread compound when servicing connections.
5.2 Adding Hydraulic Fluid
✗ Depressurize and disconnect hydraulic hose from application.
✗ Remove the oil filler plug located on the side of the reservoir.
Use a small funnel to fill reservoir.
Wipe up any spilled fluid and reinstall the oil filler plug.
natural_image
Close-up of a mechanical component with a white flange and bolted end, showing a directional arrow (no text or symbols)Note: Use only EAGLE PRO or other approved hydraulic oil. Never use brake fluid, transmission fluid, turbine oil, motor oil, alcohol, glycerin etc. Use of other than good quality hydraulic oil will void warranty and damage the pump, hose and application.
5.3 Changing Hydraulic Fluid
For best results, change fluid once a year.
✗ Repeat step 5.2 above, and then pour used fluid into a sealable container.
Dispose of fluid in accordance with local regulations.
Fill with good quality hydraulic oil as recommended above. Reinstall vented oil filler plug.
5.4 Lubrication
Use a light machine oil to lubricate pivot points, hinges etc.
5.5 Storage
✗ Depressurize and disconnect hydraulic hoses from application.
✗ Clean the pump and hose and couplers
Store in clean dry environment, avoid temperature extremes.
6. TROUBLE SHOOTING
IMPORTANT: EAGLE PRO air hydraulic pumps should be repaired only by a qualified operator or Authorized EAGLE PRO Service Centers. Repairing air hydraulic pumps without special tools and knowledge may result in personal injury.
Always release pressure and disconnect hose(s) before making repairs.
| Symptom | Possible Causes | Corrective Action |
| Application will not extend, move or respond to pressurized fluid | Overload conditionRelease valve not closed | Remedy overload conditionEnsure release valve closed |
| Application responds to pressurized fluid, but system does not maintain pressure | Overload conditionRelease valve not closedHydraulic unit malfunction | Remedy overload conditionEnsure release valve closed |
| Application will not return fluid to pump (i.e. cylinder will not retract) | Malfunctioning couplerReservoir overfilled | Secure load by other means.Open release valve, depressurize pump and hose, remove coupler and/or application, then renew or replaceSecure load by other means.Open release valve, depressurize pump and hose, remove coupler and/or application, then drain fluid to proper level |
| Application will not fully extend (cylinder or spreader) | Fluid level low | Follow symptom 3 procedure for securing load, depressurizing pump, remove application, then ensure proper fluid level |
| Poor performance | Air trapped in system | Ensure proper fluid levelEnsure vented oil filler plug let pressurized reservoir air escape (see BEFORE USE) |
Producent: Shanghaimuxinmuyeyouxiangongsi Adres:
Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, szanghaj 200000 CN.
Import do AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australii
Import do USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
| REPREZENT KE |
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt nad Menem.
C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
www.vevor.com/support
VEVOR®
TOUGH TOOLS, HALF PRICE
Technische ondersteuning en e-garantiecertificaat www.vevor.com/support
natural_image
Black and silver electric shock absorber device with metallic casing and side slots (no visible text or symbols)HULP NODIG? NEEM CONTACT MET ONS OP!
Repair Parts Sheets for hydraulic air hydraulic pumps are available from your nearest authorized EAGLE PRO Service Center or EAGLE PRO Sales office.
natural_image
Black and silver electric shock absorber device with metallic casing and side slots (no visible text or symbols)NOTE
PLEASE READ AND FOLLOW THIS INSTRUCTION BEFORE YOU USE EAGLE PRO AIR HYDRAULIC PUMPS.
Carefully inspect all components for shipping damage. If shipping damage is found, notify carrier at once. The carrier is responsible for any damage resulting from shipment.
1. SAFETY
To avoid personal injury or property damage, please follow all safety precautions. EAGLE PRO cannot be responsible for injury or damage resulting from unsafe and incorrect products use or system operation, or lack of maintenance.
DANGER is used when your action or lack of action may cause serious injury or even death. WARNING indicates a potential danger that requires correct action to avoid personal injury. IMPORTANT indicates correct action to prevent damage or equipment failure.
DANGER
The hydraulic equipment operator must be a qualified operator with correct training and work experience with hydraulic equipment. Lack of knowledge in any of these areas can lead to equipment damage or personal injury.
To avoid personal injury, please do not modify or weld hydraulic equipment without approval of EAGLE PRO.
✗ Never lift a more than the rated capacity of the cylinder, overloading causes equipment failure and serious personal injury.
✗ The cylinder is a load lifting device, not a load holding device. After the load has been raised or lowered, it must always be held mechanically, never work under a load supported by a hydraulic unit.
Keep hands and feet away from cylinder and workplace during operation to avoid personal injury.
Do not put unbalanced or off-center loads on cylinders. The incorrect load can result in equipment failure and serious personal injury.
WARNING
※ Wear safety glasses, helmet and other necessary personal protective equipment when operating hydraulic equipment.
Cylinder used to lift load must have solid footing for correct support. Please select steel or wood blocks that are capable of supporting the load.
Install Pressure gauges in the system to monitor the operating pressure. The gauge must have the same pressure rating as the pump and cylinder. The wrong gauges may result in personal injury.
The system operating pressure must lower than the lowest rated pressure in the system.
Carefully inspect the cylinder and couplers before use cylinder. Never connect a cylinder with damaged couplers or damaged port threads. The damaged coupler or damaged port threads may cause equipment failure and possible personal injury.
Install coupler in a clean environment; prevent dirt or other debris from entering into cylinder body or tube. Dirt or other debris will damage the cylinder and result in equipment failure and possible personal injury.
Before removing or tightening hose or coupler, release hydraulic pressure in system.
Never handle pressurized hoses; escaping oil under high pressure can penetrate the skin, causing serious injury. Seek medical aid immediately if injured.
Use EAGLE PRO or other approved hydraulic oil
For hydraulic technical help or repair service. Please contact the authorized EAGLE PRO Service Center in your area. EAGLE PRO has no obligations under any warranty with respect to products that have been repaired by unauthorized personnel, modified, or damaged through misuse, abuse, accident, neglect, or mishandling.
IMPORTANT
Keep the air hydraulic pump clean at all time.
When the Air hydraulic pump is not in use, release the valve, remove hose and use rubber cap to recover the port.
Do not drop objects on hose.
Do not lift or carry hydraulic equipment by the hoses or couplers, use the handle or other means.
Use hydraulic equipment in normal operating temperatures. Do not use equipment in temperatures of 65 °C (150°F) or higher. Overheating will soften seals and weakens hose material, resulting in oil leaking or other equipment failure.
2. DESCRIPTION
Air Hydraulic Pump supplies hydraulic fluid pressure to selected tools. It consists of an in-line air and hydraulic cylinder.
SPECIFICATIONS
| Model | Pressure Rating (psi) | Useable Oil Capacity (cu.in) | Input Air pressure (psi) | Input Port Threads (NPT) | Output port Threads (NPT) | Oil Delivery (cu.in / min) | Operational Manner | Weight lbs | |
| No load | load | ||||||||
| TL-A5122 | 10,000 | 30.5 | 90-145 | 1/4 -18 | 3/8 -18 | 49.5 | 7.6 | Foot Pedal | 13.2 |
3. BEFORE USE
Note: Always secure threaded port connections with non-hardening pipe thread compound. Tighten securely to prevent accidental removal of components while in use. Take care not to introduce thread compound into port openings.
Familiarize yourself with the specifications and illustrations in this operator 担 manual. Know your pump, its limitations and how it operates before attempting to use. Refer to Specification chart on above for details of oil port thread size, usable oil capacity, and other information.
4. OPERATION
Operation of the pump as follow:
Connect the hose of the Air Hydraulic pump to the hydraulic coupling on the selected tool.
Connect the air supply line to the Air Hydraulic pump. Air supply should be 5-10 CFM at 100 PSI to obtain proper operating characteristic. The air line should be equipped with an air line filter.
※ To Advance, hold or Retract
Foot Pedal operates pumps:
a. Depress the Pump end of pedal will pump hydraulic oil to the system.
b. Stop depressing the Pump or Release end will stop and hold the pressure.
c. Depress the Release end of pedal will release the pressure in the system.
text_image
PUMP Air input port RELEASE Hydraulic Oil output port5. MAINTENANCE
5.1 Inspect the connections
Inspect hoses and connections, tighten connections as needed. Use non-hardening pipe thread compound when servicing connections.
5.2 Adding Hydraulic Fluid
✗ Depressurize and disconnect hydraulic hose from application.
✗ Remove the oil filler plug located on the side of the reservoir.
Use a small funnel to fill reservoir.
Wipe up any spilled fluid and reinstall the oil filler plug.
natural_image
Close-up of a mechanical component with a white flange and bolted end, showing a directional arrow (no text or symbols)Note: Use only EAGLE PRO or other approved hydraulic oil. Never use brake fluid, transmission fluid, turbine oil, motor oil, alcohol, glycerin etc. Use of other than good quality hydraulic oil will void warranty and damage the pump, hose and application.
5.3 Changing Hydraulic Fluid
For best results, change fluid once a year.
✗ Repeat step 5.2 above, and then pour used fluid into a sealable container.
Dispose of fluid in accordance with local regulations.
Fill with good quality hydraulic oil as recommended above. Reinstall vented oil filler plug.
5.4 Lubrication
Use a light machine oil to lubricate pivot points, hinges etc.
5.5 Storage
✗ Depressurize and disconnect hydraulic hoses from application.
✗ Clean the pump and hose and couplers
Store in clean dry environment, avoid temperature extremes.
6. TROUBLE SHOOTING
IMPORTANT: EAGLE PRO air hydraulic pumps should be repaired only by a qualified operator or Authorized EAGLE PRO Service Centers. Repairing air hydraulic pumps without special tools and knowledge may result in personal injury.
Always release pressure and disconnect hose(s) before making repairs.
| Symptom | Possible Causes | Corrective Action |
| Application will not extend, move or respond to pressurized fluid | Overload conditionRelease valve not closed | Remedy overload conditionEnsure release valve closed |
| Application responds to pressurized fluid, but system does not maintain pressure | Overload conditionRelease valve not closedHydraulic unit malfunction | Remedy overload conditionEnsure release valve closed |
| Application will not return fluid to pump (i.e. cylinder will not retract) | Malfunctioning couplerReservoir overfilled | Secure load by other means.Open release valve, depressurize pump and hose, remove coupler and/or application, then renew or replaceSecure load by other means.Open release valve, depressurize pump and hose, remove coupler and/or application, then drain fluid to proper level |
| Application will not fully extend (cylinder or spreader) | Fluid level low | Follow symptom 3 procedure for securing load, depressurizing pump, remove application, then ensure proper fluid level |
| Poor performance | Air trapped in system | Ensure proper fluid levelEnsure vented oil filler plug let pressurized reservoir air escape (see BEFORE USE) |
Fabrikant: Shanghaimuxinmuyeyouxiangongsi Adres:
Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
C/O YH Consulting Limited Kantoor 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
Technische ondersteuning en e- garantiecertificaat www.vevor.com/support
VEVOR®
TOUGH TOOLS, HALF PRICE
www.vevor.com/support
LUFTHYDRAULIKPUMP
ANVÄNDARMANUAL
MODELL: TL-A5122
natural_image
Black and silver electric shock absorber device with metallic casing and side slots (no visible text or symbols)Repair Parts Sheets for hydraulic air hydraulic pumps are available from your nearest authorized EAGLE PRO Service Center or EAGLE PRO Sales office.
natural_image
Black and silver electric shock absorber device with metallic casing and side slots (no visible text or symbols)NOTE
PLEASE READ AND FOLLOW THIS INSTRUCTION BEFORE YOU USE EAGLE PRO AIR HYDRAULIC PUMPS.
Carefully inspect all components for shipping damage. If shipping damage is found, notify carrier at once. The carrier is responsible for any damage resulting from shipment.
1. SAFETY
To avoid personal injury or property damage, please follow all safety precautions. EAGLE PRO cannot be responsible for injury or damage resulting from unsafe and incorrect products use or system operation, or lack of maintenance.
DANGER is used when your action or lack of action may cause serious injury or even death. WARNING indicates a potential danger that requires correct action to avoid personal injury. IMPORTANT indicates correct action to prevent damage or equipment failure.
DANGER
The hydraulic equipment operator must be a qualified operator with correct training and work experience with hydraulic equipment. Lack of knowledge in any of these areas can lead to equipment damage or personal injury.
To avoid personal injury, please do not modify or weld hydraulic equipment without approval of EAGLE PRO.
✗ Never lift a more than the rated capacity of the cylinder, overloading causes equipment failure and serious personal injury.
✗ The cylinder is a load lifting device, not a load holding device. After the load has been raised or lowered, it must always be held mechanically, never work under a load supported by a hydraulic unit.
Keep hands and feet away from cylinder and workplace during operation to avoid personal injury.
Do not put unbalanced or off-center loads on cylinders. The incorrect load can result in equipment failure and serious personal injury.
WARNING
※ Wear safety glasses, helmet and other necessary personal protective equipment when operating hydraulic equipment.
Cylinder used to lift load must have solid footing for correct support. Please select steel or wood blocks that are capable of supporting the load.
Install Pressure gauges in the system to monitor the operating pressure. The gauge must have the same pressure rating as the pump and cylinder. The wrong gauges may result in personal injury.
The system operating pressure must lower than the lowest rated pressure in the system.
Carefully inspect the cylinder and couplers before use cylinder. Never connect a cylinder with damaged couplers or damaged port threads. The damaged coupler or damaged port threads may cause equipment failure and possible personal injury.
Install coupler in a clean environment; prevent dirt or other debris from entering into cylinder body or tube. Dirt or other debris will damage the cylinder and result in equipment failure and possible personal injury.
Before removing or tightening hose or coupler, release hydraulic pressure in system.
Never handle pressurized hoses; escaping oil under high pressure can penetrate the skin, causing serious injury. Seek medical aid immediately if injured.
Use EAGLE PRO or other approved hydraulic oil
For hydraulic technical help or repair service. Please contact the authorized EAGLE PRO Service Center in your area. EAGLE PRO has no obligations under any warranty with respect to products that have been repaired by unauthorized personnel, modified, or damaged through misuse, abuse, accident, neglect, or mishandling.
IMPORTANT
Keep the air hydraulic pump clean at all time.
When the Air hydraulic pump is not in use, release the valve, remove hose and use rubber cap to recover the port.
Do not drop objects on hose.
Do not lift or carry hydraulic equipment by the hoses or couplers, use the handle or other means.
Use hydraulic equipment in normal operating temperatures. Do not use equipment in temperatures of 65 °C (150°F) or higher. Overheating will soften seals and weakens hose material, resulting in oil leaking or other equipment failure.
2. DESCRIPTION
Air Hydraulic Pump supplies hydraulic fluid pressure to selected tools. It consists of an in-line air and hydraulic cylinder.
SPECIFICATIONS
| Model | Pressure Rating (psi) | Useable Oil Capacity (cu.in) | Input Air pressure (psi) | Input Port Threads (NPT) | Output port Threads (NPT) | Oil Delivery (cu.in / min) | Operational Manner | Weight lbs | |
| No load | load | ||||||||
| TL-A5122 | 10,000 | 30.5 | 90-145 | 1/4 -18 | 3/8 -18 | 49.5 | 7.6 | Foot Pedal | 13.2 |
3. BEFORE USE
Note: Always secure threaded port connections with non-hardening pipe thread compound. Tighten securely to prevent accidental removal of components while in use. Take care not to introduce thread compound into port openings.
Familiarize yourself with the specifications and illustrations in this operator 担 manual. Know your pump, its limitations and how it operates before attempting to use. Refer to Specification chart on above for details of oil port thread size, usable oil capacity, and other information.
4. OPERATION
Operation of the pump as follow:
Connect the hose of the Air Hydraulic pump to the hydraulic coupling on the selected tool.
Connect the air supply line to the Air Hydraulic pump. Air supply should be 5-10 CFM at 100 PSI to obtain proper operating characteristic. The air line should be equipped with an air line filter.
※ To Advance, hold or Retract
Foot Pedal operates pumps:
a. Depress the Pump end of pedal will pump hydraulic oil to the system.
b. Stop depressing the Pump or Release end will stop and hold the pressure.
c. Depress the Release end of pedal will release the pressure in the system.
text_image
PUMP Air input port RELEASE Hydraulic Oil output port5. MAINTENANCE
5.1 Inspect the connections
Inspect hoses and connections, tighten connections as needed. Use non-hardening pipe thread compound when servicing connections.
5.2 Adding Hydraulic Fluid
✗ Depressurize and disconnect hydraulic hose from application.
✗ Remove the oil filler plug located on the side of the reservoir.
Use a small funnel to fill reservoir.
Wipe up any spilled fluid and reinstall the oil filler plug.
natural_image
Close-up of a mechanical component with a white flange and bolted end, showing a directional arrow (no text or symbols)Note: Use only EAGLE PRO or other approved hydraulic oil. Never use brake fluid, transmission fluid, turbine oil, motor oil, alcohol, glycerin etc. Use of other than good quality hydraulic oil will void warranty and damage the pump, hose and application.
5.3 Changing Hydraulic Fluid
For best results, change fluid once a year.
✗ Repeat step 5.2 above, and then pour used fluid into a sealable container.
Dispose of fluid in accordance with local regulations.
Fill with good quality hydraulic oil as recommended above. Reinstall vented oil filler plug.
5.4 Lubrication
Use a light machine oil to lubricate pivot points, hinges etc.
5.5 Storage
✗ Depressurize and disconnect hydraulic hoses from application.
✗ Clean the pump and hose and couplers
Store in clean dry environment, avoid temperature extremes.
6. TROUBLE SHOOTING
IMPORTANT: EAGLE PRO air hydraulic pumps should be repaired only by a qualified operator or Authorized EAGLE PRO Service Centers. Repairing air hydraulic pumps without special tools and knowledge may result in personal injury.
Always release pressure and disconnect hose(s) before making repairs.
| Symptom | Possible Causes | Corrective Action |
| Application will not extend, move or respond to pressurized fluid | Overload conditionRelease valve not closed | Remedy overload conditionEnsure release valve closed |
| Application responds to pressurized fluid, but system does not maintain pressure | Overload conditionRelease valve not closedHydraulic unit malfunction | Remedy overload conditionEnsure release valve closed |
| Application will not return fluid to pump (i.e. cylinder will not retract) | Malfunctioning couplerReservoir overfilled | Secure load by other means.Open release valve, depressurize pump and hose, remove coupler and/or application, then renew or replaceSecure load by other means.Open release valve, depressurize pump and hose, remove coupler and/or application, then drain fluid to proper level |
| Application will not fully extend (cylinder or spreader) | Fluid level low | Follow symptom 3 procedure for securing load, depressurizing pump, remove application, then ensure proper fluid level |
| Poor performance | Air trapped in system | Ensure proper fluid levelEnsure vented oil filler plug let pressurized reservoir air escape (see BEFORE USE) |
Tillverkare: Shanghaimuxinmuyeyouxiangongsi
Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Importerad till AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australien
Importerad till USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
| EC | REP |
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt am Main.
| UK | REP |
YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147, Centurion House,
London Road, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
www.vevor.com/support
