SR241131 - Wardrobe Vevor - Free user manual and instructions

USER MANUAL SR241131 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

COFFEE BAR CABINET USER MANUAL

MODEL NO.: SR241131

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Coffee Bar Cabinet

MODEL NO.: SR241131

Line drawing of a two-level office cabinet or enclosure with metal frame and vented door (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure do so may result in serious injury.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly c create hazards.

2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.

3. Keep the assembly area clean and well-lit.

4. Keep bystanders out of the area during assembly.

5. Do not assemble when tired or when under the influence of alcohol drugs or medication.

6. The product capabilities apply to properly and completely assembled products only.

7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Coffee Bar Cabinet.

8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap separate all parts in a clean work area.

SAVE THESE INSTRUCTIONS

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy Do not allow children to play with or r item.
2. Do not exceed weight capacities, before moving.
3. Use only on a flat, hard and smooth surface capable of safely supporting a fully loaded Coffee Bar Cabinet.
4. Use as intended only.
5. Inspect before every use; do not use if parts are loose or damage

TECHNICAL SPECIFICATIONS

Model	SR241131
Product Dimensions (LxWxH)(mm)	1200*398*830
Net Weight(kg)	About 30.8

*Products such as specifications, appearance, and design are subject to modification without prior notice.

PACKAGE CONTENTS

11 PC	21 PC	31 PC	41 PC
51 PC	61 PC	71 PC	81 PC
91 PC	101 PC	111 PC	122 PCS
13	14	15	16

Technical diagram of a modular storage or rack system with numbered components, likely for architectural or engineering purposes.

A28pcs	B28pcs	C[IMAGE]20pcs	D4pcs	E4pcs	F4pcs	G[tweed]2pcs	H[tweed]4pcs
I[8pcs]8pcs	J[8pcs]4pcs	K[960H]10pcs	L[12mm]4pcs	M2pcs	N[10mm]4pcs	O[tweed]4pcs	P[tweed]2pcs
Q[4pcs]4pcs	R[4pcs]24pcs	S[5pcs]4pcs	T[7pcs]4pcs	U4pcs
Cam Lock Fastening SystemThis Cam Lock Fastening System will be used throughout the assembly process						2

ASSEMBLY STEPS

5 B x8 B B B B B 2 6 A x8 C x4 ⑨ ④ ⑪ A A A A C C C A ②

7 A x8 C x4 ③ A A C A C ④ A A C A A ⑪ A A 8 ⑧

9 D x4 E x4 F x4 G x2 10 F E D 10 D G 10 I x4 J x2 R x8 S x4 13 R R S S S S I J J I J

11

R R ⑬

R_x4

12

R R ⑭

R_x4

13

Diagram illustrating four different cable or switch mounting techniques with directional arrows and labeled components.

graph TD
    A["Start"] --> B["Switch with cable and wire"]
    B --> C["Close-up of cable and wire"]
    C --> D["Switch with cable and wire"]
    D --> E["Close-up of cable and wire"]
    E --> F["End"]

graph TD
    A["Left panel: Screen with arrow"] --> B["Switching cable"]
    B --> C["Motor switch with clockwise arrow"]
    C --> D["Internal circuit: Switch, Motor, Cable"]
    D --> E["Right panel: Switch, Motor, Cable"]
    E --> F["Back panel: Switch, Motor, Cable"]

14

H H H H ⑦

15

	I x4
	J x2

I J ⑮

Isometric line drawing of a rectangular frame with internal supports and dimension lines, labeled with numbers 1 and 16 (no text or symbols on the diagram itself)

16

Isometric line drawing of a two-level metal enclosure with labeled components (no text or symbols beyond numbers)

Simple diagram with a vertical line and a downward arrow, no text or symbols present

19

① C C C A C A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A C C C C C C C C C C C C

20

Technical diagram of a structural frame with labeled components and cross-sectional views

N x4 K x20 T x4 U x4

N

21 P O P O Ox2 Px2

COMPLETION

Isometric line drawing of a two-level cabinet or enclosure with internal compartments and structural supports (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Isometric line drawing of a two-level cabinet or enclosure with internal compartments and grilles (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

Technical diagram of a modular storage or rack system with numbered components, likely for assembly or manufacturing purposes.

A28pcs	B28pcs	C[IMAGE]20pcs	D4pcs	E[unknown]4pcs	F4pcs	G[unknown]2pcs	H[unknown]4pcs
I8pcs	J4pcs	K10pcs	L[W520]4pcs	M[unknown]2pcs	N[unknown]4pcs	O[unknown]4pcs	P[unknown]2pcs
Q4pcs	R[KOZ3]24pcs	S[KSTT][4CZ7]4pcs	T4pcs	U
Cam Lock Fastening SystemThis Cam Lock Fastening System will be used throughout the assembly process				1		2
				[unknown]		[unknown]

ÉTAPES D'ASSEMBLAGE

7 A x8 C x4 ③ A A C A C A C ④ ⑪ A A A 8 ⑧

9 Dx4 Ex4 Fx4 Gx2 10 F E D F E D G 10 G I x4 J x2 Rx8 S x4 13 R R S R R S R R S 14 J J

13

graph TD
    A["Left panel: Top panel with grid connection"] --> B["Top panel: Left panel with switch"]
    B --> C["Top panel: Right panel with switch"]
    C --> D["Right panel: Bottom panel with switch"]
    D --> E["Left panel: Left panel with grid connection"]
    E --> F["Left panel: Left panel with switch"]
    F --> G["Left panel: Right panel with switch"]
    G --> H["Right panel: Right panel with switch"]
    H --> I["Right panel: Bottom panel with switch"]
    I --> J["Left panel: Left panel with grid connection"]
    J --> K["Left panel: Left panel with switch"]
    K --> L["Left panel: Right panel with switch"]
    L --> M["Right panel: Right panel with switch"]
    M --> N["Right panel: Bottom panel with switch"]

14

H H H H ⑦

15 I x4 J x2 16 15 16

21 P O P O Ox2 Px2

ACHÈVEMENT

Isometric line drawing of a two-level cabinet or enclosure with internal compartments and grilles (no text or symbols)

Fabricant : Shanghaimuxinmuyeyouxiangongsi Adresse :

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importé en Australie : SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australie

YH CONSULTING LIMITED. C/O YH Consulting

Limited Bureau 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT

DE LA CE

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

Kaffeebarschrank

BENUTZERHANDBUCH

MODELL-NR.: SR241131

Isometric line drawing of a two-level industrial cabinet or enclosure with internal compartments and grilles (no text or symbols)

Technical diagram of a modular storage or rack system with numbered components, likely for assembly or manufacturing purposes.

A28pcs	B28pcs	C[IMAGE]20pcs	D[XABA]4pcs	E4pcs	F4pcs	G2pcs	H4pcs
I8pcs	J4pcs	K[BHY6]10pcs	L4pcs	M[356T]2pcs	N[Y2XX]4pcs	O[409W]4pcs	P[14XX]2pcs
Q[TKT6]4pcs	R24pcs	S4pcs	T[2008][Y2Z0]4pcs	U
Cam Lock Fastening SystemThis Cam Lock Fastening System will be used throughout the assembly process				1[YC20]		2

MONTAGEANLEITUNG

7 A x8 C x4 ③ A A C A C ④ A A C A A ⑪ A A 8 ⑧

9 Dx4 Ex4 Fx4 Gx2 10 F E D 10 G 10 I x4 J x2 Rx8 S x4 13 R R S R R S R R S S I J 14

13

graph TD
    A["Left Panel: Top Left"] --> B["Top Right"]
    B --> C["Top Left"]
    C --> D["M"]
    D --> E["Right Panel: Top Right"]
    E --> F["Left Panel: Bottom Left"]
    F --> G["Right Panel: Bottom Right"]
    G --> H["Left Panel: Bottom Right"]
    H --> I["Right Panel: Bottom Left"]
    I --> J["M"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333
    style F fill:#ffc,stroke:#333
    style G fill:#cfc,stroke:#333
    style H fill:#fcc,stroke:#333
    style I fill:#ffc,stroke:#333

14

H H H H ⑦

15 I x4 J x2 16 15 16

21 P O P O Ox2 Px2

FERTIGSTELLUNG

Isometric line drawing of a two-level cabinet or enclosure with internal compartments and grilles (no text or symbols)

Hersteller: Shanghaimuxinmuyeyouxiangongsi Adresse:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Nach AUS importiert: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importiert in die USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

MOBILE BAR PER CAFFÈ

MANUALE D'USO

MODELLO NUMERO: SR241131

Isometric line drawing of a two-level industrial cabinet or enclosure with internal compartments and grilles (no text or symbols)

Technical diagram of a modular storage or rack system with numbered components, likely for assembly or manufacturing purposes.

A	B	C	D	E	F	G	H
						[6x10]
28pcs	28pcs	20pcs	4pcs	4pcs	4pcs	2pcs	4pcs
I	J	K	L	M	N	O	P
[H06D]		[2H3X]			[used]	[7x44]
8pcs	4pcs	10pcs	4pcs	2pcs	4pcs	4pcs	2pcs
Q	R	S		U	[K00Z]
	[C053]	[WA02]
4pcs	24pcs	4pcs	4pcs
Cam Lock Fastening System				1		2
This Cam Lock Fastening System will be used throughout the assembly process

FASI DI MONTAGGIO

7 A x8 C x4 ③ A A C A C A A C ④ ⑪ A A 8 ⑧

9 Dx4 Ex4 Fx4 Gx2 10 F E D 10 G 10 I x4 J x2 Rx8 S x4 13 R R S R S R R S S I J 14

13

graph TD
    A["Left Panel: Top-Left Switch"] --> B["Top-Left Switch"]
    B --> C["Top-Right Switch"]
    C --> D["Top-Right Switch"]
    D --> E["Left Panel: Left Board"]
    E --> F["Left Board: Left Panel"]
    F --> G["Left Board: Left Board"]
    G --> H["Left Panel: Left Panel"]
    H --> I["Left Board: Right Board"]
    I --> J["Left Board: Right Board"]
    J --> K["Left Panel: Right Board"]
    K --> L["Left Board: Right Board"]
    L --> M["Left Panel: Left Board"]
    M --> N["Left Board: Left Board"]
    N --> O["Left Panel: Left Board"]

14

H H H H ⑦

15 I x4 J x2 16 15 16

21 P O P O Ox2 Px2

COMPLETAMENTO

Isometric line drawing of a two-level cabinet or enclosure with internal compartments and grilles (no text or symbols)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

RAPPRESENTANZA DEL REGNO UNITO

YH CONSULTING LIMITED. C/O YH Consulting

Limited Ufficio 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

MUEBLE BAR DE CAFÉ

MANUAL DEL USUARIO

NÚMERO DE MODELO: SR241131

Isometric line drawing of a two-level cabinet or enclosure with internal compartments and grilles (no text or symbols)

Technical diagram of a modular storage or rack system with numbered components, likely for architectural or engineering purposes.

A28pcs	B28pcs	C[20pcs]	D4pcs	E[ddc1]4pcs	F[4pcs]	G[ddc3]2pcs	H[ddc4]4pcs
I8pcs	J[03Y5]4pcs	K[4ZDW]10pcs	L[Y6HX]4pcs	M[ddc1]2pcs	N[ddc3]4pcs	O[ddc4]4pcs	P[ddc5]2pcs
Q4pcs	R24pcs	S[TZ0Z]4pcs	T[0ZAY]4pcs	U
Cam Lock Fastening SystemThis Cam Lock Fastening System will be used throughout the assembly process				1 [TRAWI]

PASOS DE MONTAJE

7 A x8 C x4 ③ A A C A C A C ④ A A C A A ⑪ A A 8 ⑧

9 Dx4 Ex4 Fx4 Gx2 10 F E D F E D G 10 G 10 I x4 J x2 Rx8 S x4 13 R R S R R S R R S 14 I J

13

graph TD
    A["Left Panel: Top Left"] --> B["Top Right"]
    B --> C["Top Left"]
    C --> D["M"]
    D --> E["Right Panel: Top Right"]
    E --> F["Left Panel: Bottom Left"]
    F --> G["Right Panel: Bottom Right"]
    G --> H["Left Panel: Bottom Right"]
    H --> I["Right Panel: Bottom Left"]
    I --> J["M"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333
    style F fill:#ffc,stroke:#333
    style G fill:#cfc,stroke:#333
    style H fill:#fcc,stroke:#333
    style I fill:#ffc,stroke:#333

14

H H H H ⑦

15 I x4 J x2 16 15 16

21 P O P O Ox2 Px2

TERMINACIÓN

Isometric line drawing of a two-level cabinet or enclosure with internal compartments and grilles (no text or symbols)

Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRESENTANTE CE

E-CrossStu GmbH

Isometric line drawing of a two-level cabinet or enclosure with internal compartments and grilles (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Technical diagram of a modular storage or rack system with numbered components, likely for architectural or engineering purposes.

A28pcs	B28pcs	C[IMAGE]20pcs	D[BT68]4pcs	E4pcs	F4pcs	G[GTZC]2pcs	H[ZW28]4pcs
I[GTK3]8pcs	J4pcs	K10pcs	L[XTTO]4pcs	M[TW65]2pcs	N[TZX7]4pcs	O[TT11]4pcs	P2pcs
Q[2STD][2BTG]4pcs	R[XSBV]24pcs	S[SOHD]4pcs	T[2T23]4pcs	U[2027]
Cam Lock Fastening SystemThis Cam Lock Fastening System will be used throughout the assembly process						2[HW28]
				[025G]

KROKI MONTAŻU

7 A x8 C x4 ③ A A C A C A C ④ ⑪ A A A 8 ⑧

9 Dx4 Ex4 Fx4 Gx2 10 F E D F E D G 10 G I x4 J x2 Rx8 S x4 13 R R S R R S R R S S I J J 14

13

graph TD
    A["Left Panel: Top-Left Switch"] --> B["Top-Left Switch"]
    B --> C["Top-Right Switch"]
    C --> D["Top-Left Switch"]
    D --> E["Left Panel: Left Board"]
    E --> F["Left Board: Left Panel"]
    F --> G["Left Panel: Left Board"]
    G --> H["Left Panel: Left Board"]
    H --> I["Left Panel: Left Board"]
    I --> J["Left Panel: Left Board"]
    J --> K["Left Panel: Right Board"]
    K --> L["Left Panel: Right Board"]
    L --> M["Left Panel: Right Board"]
    M --> N["Left Panel: Right Board"]
    N --> O["Left Panel: Right Board"]
    O --> P["Left Panel: Right Board"]
    P --> Q["Left Panel: Right Board"]
    Q --> R["Left Panel: Right Board"]
    R --> S["Left Panel: Right Board"]
    S --> T["Left Panel: Right Board"]
    T --> U["Left Panel: Right Board"]

14

H H H H ⑦

15 I x4 J x2 16 15 16

21 P O P O Ox2 Px2

UKOŃCZENIE

Isometric line drawing of a two-level cabinet or enclosure with internal compartments and grilles (no text or symbols)

Producent: Shanghaimuxinmuyeyouxiangongsi Adres:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, szanghaj 200000 CN.

Importowane do AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REP WIEL KIEJ BRYTANII

YH CONSULTING LIMITED. C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX

Przedstaw ciel UE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

KOFFIEBAR KAST

GEBRUIKERSHANDLEIDING

MODELNUMMER: SR241131

Isometric line drawing of a two-level industrial cabinet or enclosure with internal compartments and grilles (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Technical diagram of a modular storage or rack system with numbered components, likely for assembly or manufacturing purposes.

A28pcs	B28pcs	C20pcs	D4pcs	E[6x6d]4pcs	F[4pcs]4pcs	G[6x6d]2pcs	H[6x6d]4pcs
I[4H76]8pcs	J4pcs	K10pcs	L[5448]4pcs	M[6x6d]2pcs	N[6x6d]4pcs	O[6x6d]4pcs	P[6x6d]2pcs
Q4pcs	R24pcs	S[KX30]4pcs	T[2D76][TH7H]4pcs	U[32D0]
Cam Lock Fastening SystemThis Cam Lock Fastening System will be used throughout the assembly process				1		2
				[6x6d]		[6x6d]
				[6x6d]		[6x6d]

MONTAGESTAPPEN

7 A x8 C x4 ③ A A C A C A A C ④ ⑪ A A 8 ⑧

9 Dx4 Ex4 Fx4 Gx2 10 F E D 10 G 10 I x4 J x2 Rx8 S x4 13 R R S R S R R S S I J 14

13

graph TD
    A["Left Panel: Top-Left Switch"] --> B["Top-Left Switch"]
    B --> C["Top-Right Switch"]
    C --> D["Top-Right Switch"]
    D --> E["Left Panel: Left Board"]
    E --> F["Left Board: Left Panel"]
    F --> G["Left Board: Left Board"]
    G --> H["Left Panel: Left Panel"]
    H --> I["Left Board: Right Board"]
    I --> J["Left Board: Right Board"]
    J --> K["Left Panel: Right Board"]
    K --> L["Left Board: Right Board"]
    L --> M["Left Panel: Left Board"]
    M --> N["Left Board: Left Board"]
    N --> O["Left Panel: Left Board"]

14

H H H H ⑦

15 I x4 J x2 16 15 16

21 P O P O Ox2 Px2

VOLTOOING

Isometric line drawing of a two-level cabinet or enclosure with internal compartments and grilles (no text or symbols)

Fabrikant: Shanghaimuxinmuyeyouxiangongsi Adres:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Kantoor 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC-REP

E-CrossStu GmbH

Mainzer Landstr.69,

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

KAFFEBARSKÅP

ANVÄNDARMANUAL

MODELLNR: SR241131

Isometric line drawing of a modular kitchen cabinet with grilles and doors (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

Technical diagram of a modular storage or rack system with numbered components, likely for assembly or manufacturing purposes.

A28pcs	B28pcs	C[IMAGE]20pcs	D4pcs	E[wecal]4pcs	F[4pcs]	G[wept]2pcs	H[wept]4pcs
I[G307]8pcs	J[572S]4pcs	K[2726]10pcs	L4pcs	M[4pcd]2pcs	N[loccel]4pcs	O[leav]4pcs	P[leav]2pcs
Q4pcs	R24pcs	S4pcs	T[WY90]4pcs	U[D50Y]
Cam Lock Fastening SystemThis Cam Lock Fastening System will be used throughout the assembly process				1		2[wept]
				[B6HA]		[Cwnt4]

MONTERINGSSEG

1

⑨ A A ⑥ ⑤ ⑤

2

Technical diagram showing nine labeled components of a structural framework with beams and supports, including section numbers 4, 5, 9.

7 A x8 C x4 ③ A A C A C ④ A A C A A ⑪ A A 8 ⑧

9 Dx4 Ex4 Fx4 Gx2 10 F E D 10 G 10 I x4 J x2 Rx8 S x4 13 R R S R S R R S S I J 14

13

graph TD
    A["Left Panel: Top-Left Switch"] --> B["Top-Left Switch"]
    B --> C["Top-Right Switch"]
    C --> D["Top-Right Switch"]
    D --> E["Left Panel: Left Board"]
    E --> F["Left Board: Left Panel"]
    F --> G["Left Board: Left Board"]
    G --> H["Left Panel: Left Panel"]
    H --> I["Left Board: Right Board"]
    I --> J["Left Board: Right Board"]
    J --> K["Left Panel: Right Board"]
    K --> L["Left Board: Right Board"]
    L --> M["Left Panel: Left Board"]
    M --> N["Left Board: Left Board"]
    N --> O["Left Panel: Left Board"]
    O --> P["Left Board: Right Board"]
    P --> Q["Left Panel: Right Board"]
    Q --> R["Left Board: Right Board"]
    R --> S["Left Panel: Left Board"]

14

H H H H ⑦

15 I x4 J x2 16 15 16

21 P O P O Ox2 Px2

KOMPLETTERING

Isometric line drawing of a two-level cabinet or enclosure with internal compartments and grilles (no text or symbols)

Tillverkare: Shanghaimuxinmuyeyouxiangongsi Adress:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support