RV-SJ-6000 - Jack Vevor - Free user manual and instructions

Brand	Vevor
Model	RV-SJ-6000
Product Type	RV Leveling Jack
Maximum Capacity	6000 lb (2720 kg)
Rated Capacity	4000 lb (1814 kg)
Height Range	11 to 17 inches (280-435 mm)
Quantity per Box	4 pieces
Frame Material	High-Quality Aluminum
Rubber Pads	Yes, to protect the chassis
Usage	Vertical only, no lateral pressure
Installation	Full base and nut mounting required
Safety	Read the manual, wear protective equipment
Maintenance	Clean with mild detergent and damp cloth
Spare Parts	Use only manufacturer-approved parts
Repairability	Repair by qualified technician only
Warranty	Electronic warranty certificate available at www.vevor.com/support
Country of Origin	Imported from China, distributed by Vevor

Frequently Asked Questions - RV-SJ-6000 Vevor

What is the maximum capacity of the RV-SJ-6000 jack?

The maximum capacity is 6000 lb (2720 kg) per stabilizer jack.

How to properly install the jack?

First place the product in a stable area. Adjust the screw to the appropriate height, then insert the screw into the hole and lock it with a crossbar adjustment device.

Can I use this jack on soft ground?

It is recommended to place solid wooden supports or platforms under the jacks on soft ground.

Is it mandatory to use all four jacks together?

Yes, all four jacks must be used together and their height should be adjusted similarly to avoid excessive force on a single jack.

How to maintain this jack?

Keep the surface free of hydraulic fluid and grease. Clean with mild detergent and a damp cloth. Do not use flammable solvent.

Can I use this jack in an inclined position?

No, the jack can only be used vertically and must not be pressed laterally.

What accessories are included in the box?

The box contains 4 complete jacks with base, nut, screw, crossbar, and rubber pad.

What to do if a part is missing or damaged?

Do not attempt to assemble or use the product. Contact technical support via www.vevor.com/support.

How to use the jack with leveling blocks?

The jacks can be used with leveling blocks to improve stability.

Are there safety precautions to take?

Wear safety glasses and work gloves. Supervise children, and do not use the device if tired or under influence. Read the complete manual before use.

USER MANUAL RV-SJ-6000 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

RV STACK JACK

MODEL: RV-SJ-6000

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared top brands and doses not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

RV STACK JACK

MODEL: RV-SJ-6000

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate

Contact us: Technical Support and E-Warranty Certificate

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

Warning: To reduce the risk of injury, the user must read the instructions manual carefully.

PRODUCT ADVANTAGES

1. The frame is made of high-quality aluminum and is not easy to rust outd
2. Camper stabilizer jacks have good size and are easy to store.
3. It can be used with leveling blocks.
4. The Max. Capacity: 6000lbs per stabilizing Jack.
5. The cushion rubbers can avoid direct contact between jacks and the chassis protect the paint surface of the chassis, and avoid hearing the noise generated by metal friction.
6. Four RV jacks must be used together. During the process of adjusting the height, ensure that the height of all four RV jacks is similar to avoid ex-force on a single jack.
7. When using on soft ground, it is recommended to place strong wooden boards or platforms under the RV jacks.

PRODUCT PAREMETERS

Model	RV-SJ-6000
Height Range	11-17 in (or 280-435mm)
Rated Load	4000 lbs (or 1814kg)
Maximum Load	6000 lbs (or 2720kg)
Quantity Per Box	4 pcs

ASSEMBLY PREPARATION

NO	PART NAME	QTY
1	Frame base	1
2	Nut	1
3	Screw	1
4	Crossbar	1
5	Cushion rubber	1

When unpacking this product, check to make sure the parts listed below are included and carefully inspect for any damage that may have occurred during transit. If any part is missing or damaged, do not attempt to assemble or use the product.

SAFETY INSTRUCTIONS

WARNING:

Read carefully and understand all instructions before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.

1. Stay alert. Watch what you are doing and use common sense when operating the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool increases the risk of injury to persons.
2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair, hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, long hair increases the risk of injury to persons as a result of being caught in moving parts.
3. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situations.
4. Use safety equipment. Wear ANSI-approved safety goggles and heavy-duty work gloves during use.
5. Do not force the tool. Use the correct tool for the application. The correct tool will do the job better and safer at the rate for which the tool is designed.
6. Store the tool when it is idle, out of reach of children, and other untrained persons. A tool is dangerous in the hands of untrained users.
7. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
8. Use only accessories that are identified by the manufacturer for the specific tool model. Use of an accessory not intended for use with the specific model increases the risk of injury to persons.
9. Inspect repair after use. Repairs to structural or frame members must be inspected by a qualified technician to ensure that the structure is still strong enough to safely fulfill its function.
10. Tool service must be performed only by qualified repair personnel.
11. When servicing a tool, use only identical replacement parts. Use only authorized parts.
12. Only qualified and authorized persons are allowed to operate the RV stand jack.
13. Use as intended only. This product is not a toy. Do not allow children with or near this item.

SAVE THESE INSTRUCTIONS

INSTALLATION INSTRUCTIONS

1. Not suitable for uneven and easily sunken surfaces;
2. The base and nut can only be used after fully fitting;
3. The overall lifting range is 11 inches to 17 inches;
4. The working load-bearing pressure is less than 6000 pounds;
5. Usage: It can only be applied vertically and cannot be pressed laterally.

Notice:

a. Place the product in a stable area first. b. Adjust the screw to the appropriate height. c. Insert the screw into the hole and lock it with a crossbar adjuster to use

MAINTENANCE

1. Keep the surface of this tool and its accessories free of hydraulic fluid, air, and grease. Use only a mild detergent and a damp cloth when cleaning. Do not use a flammable or combustible solvent to clean this tool or its accessories.
2. Before each use, examine the general condition of the tool and its accessories. Check for loose components, misalignment, binding of moving parts, broken parts, and any other condition that may affect its safe operation. Do not use a damaged tool or its damaged accessories.
3. Stop using the equipment immediately if any of the problems occur, as it may cause personal injury. Any repairs or replacement must be done by a qualified person or an authorized service center only.

Manufacturer: Shanghai Muxin Muye Youxian Gongsi

Address: Shuangcheng Road 803 Nong 11 Hao 1602A-1609 Shi, Baoshan District, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

www.vevor.com/support

PRODUCT ADVANTAGES

PRODUCT PARAMETERS

YH CONSULTING LIMITED. C/O YH Consulting

Limited Bureau 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported in USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

NEED HELP? CONTACT US!

www.vevor.com/support

YH CONSULTING LIMITED. C/O YH Consulting Limited

Office 147, Centurion House, London Road, Staines-

upon-Thames, Surrey, TW18 4AX

Przedstaw ciel UE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

www.vevor.com/support

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

NEED HELP? CONTACT US!

www.vevor.com/support

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support